new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 4

Imaging and controlling electron motion and chemical structural dynamics of biological system in real time and space

Ultrafast electron microscopy (UEM) has found widespread applications in physics, chemistry, and materials science, enabling real-space imaging of dynamics on ultrafast timescales. Recent advances have pushed the temporal resolution of UEM into the attosecond regime, enabling the attomicroscopy technique to directly visualize electron motion. In this work, we extend the capabilities of this powerful imaging tool to investigate ultrafast electron dynamics in a biological system by imaging and controlling light induced electronic and chemical changes in the conductive network of multicellular cable bacteria. Using electron energy loss spectroscopy (EELS), we first observed a laser induced increase in {\pi}-electron density, accompanied by spectral peak broadening and a blueshift features indicative of enhanced conductivity and structural modification. We also traced the effect of ultrafast laser pumping on bulk plasmon electron oscillations by monitoring changes in the plasmon like resonance peak. Additionally, we visualized laser induced chemical structural changes in cable bacteria in real space. The imaging results revealed carbon enrichment alongside a depletion of nitrogen and oxygen, highlighting the controllability of chemical dynamics. Moreover, time resolved EELS measurements further revealed a picosecond scale decay and recovery of both {\pi}-electron and plasmonic features, attributed to electron phonon coupling. In addition to shedding light on the mechanism of electron motion in cable bacteria, these findings demonstrate ultrafast modulation and switching of conductivity, underscoring their potential as bio-optoelectronic components operating on ultrafast timescales.

  • 7 authors
·
Oct 2, 2025

First principles simulations of dense hydrogen

Accurate knowledge of the properties of hydrogen at high compression is crucial for astrophysics (e.g. planetary and stellar interiors, brown dwarfs, atmosphere of compact stars) and laboratory experiments, including inertial confinement fusion. There exists experimental data for the equation of state, conductivity, and Thomson scattering spectra. However, the analysis of the measurements at extreme pressures and temperatures typically involves additional model assumptions, which makes it difficult to assess the accuracy of the experimental data. rigorously. On the other hand, theory and modeling have produced extensive collections of data. They originate from a very large variety of models and simulations including path integral Monte Carlo (PIMC) simulations, density functional theory (DFT), chemical models, machine-learned models, and combinations thereof. At the same time, each of these methods has fundamental limitations (fermion sign problem in PIMC, approximate exchange-correlation functionals of DFT, inconsistent interaction energy contributions in chemical models, etc.), so for some parameter ranges accurate predictions are difficult. Recently, a number of breakthroughs in first principle PIMC and DFT simulations were achieved which are discussed in this review. Here we use these results to benchmark different simulation methods. We present an update of the hydrogen phase diagram at high pressures, the expected phase transitions, and thermodynamic properties including the equation of state and momentum distribution. Furthermore, we discuss available dynamic results for warm dense hydrogen, including the conductivity, dynamic structure factor, plasmon dispersion, imaginary-time structure, and density response functions. We conclude by outlining strategies to combine different simulations to achieve accurate theoretical predictions.

  • 27 authors
·
May 17, 2024

Surface Charge--Potential Relation for Spherical Particles in Electrolyte Solutions

Predicting the relationship between surface charge density and electrostatic potential for spherical particles remains a fundamental challenge in colloid science. Because the governing non-linear Poisson--Boltzmann equation lacks a general exact analytical solution, researchers typically rely on numerical calculations or various semi-empirical approximations. In this paper, we overcome these limitations by developing a dual-asymptotic framework that provides explicit, closed-form expressions for this surface charge--potential relationship across the entire spectrum of particle curvature. For weakly curved systems, where the Debye length λ_D is much smaller than the particle radius R (λ_D/R ll 1), a formal mathematical derivation rigorously establishes the Ohshima--Healy--White formula as an exact regular perturbation expansion. Conversely, for highly curved spheres (R/λ_D ll 1), we employ singular perturbation analysis using the scaled particle radius as the small parameter. This approach provides a first-principles mathematical justification for the spherical Debye--Hückel theory, proving that its leading-order expansion remains asymptotically exact within the full non-linear Poisson--Boltzmann framework due to the geometric deactivation of non-linearity. Crucially, we map the exact limits of this geometric regulation, demonstrating how non-linear screening re-emerges as the particle radius increases, with the breakdown threshold governed by the interplay between curvature and surface charge density.

  • 2 authors
·
Oct 1

From Quantized Hall Plateaus to Topological Surfaces: Quantum Capacitance as a Unifying Probe

The quantum Hall effect, topological insulators and quantum capacitance are usually treated as distinct topics, yet they share a common thread. Bulk topology determines a protected boundary state, and quantum capacitance is one of the few electrostatic methods able to detect the density of states. This paper examines that connection. The integer quantum Hall effect showed that quantised boundary transport has a topological origin given by the Chern number, later extended to zero field in Z2 topological insulators with helical edge and Dirac surface states. Quantum capacitance, developed for two-dimensional electron gases, has since become a key technique for mapping the Landau level density of states underlying the quantum Hall effect and the linear Dirac density of states of topological surface states. This picture is complicated by self-consistent screening theory, which shows that the quantum Hall bulk splits into compressible and incompressible regions that shift with field. Local quantum capacitance measurements confirm that the bulk is not uniformly insulating across a quantised plateau, even though the plateau stays quantised. The paper argues that quantum capacitance is not a secondary feature of these phenomena but one of the clearest windows into the boundary density of states that topology imposes, and that it reveals the local, field-dependent nature of the insulating bulk assumption underlying the analogy between the quantum Hall effect and topological insulators.

  • 1 authors
·
Sep 28

KineticNet: Deep learning a transferable kinetic energy functional for orbital-free density functional theory

Orbital-free density functional theory (OF-DFT) holds the promise to compute ground state molecular properties at minimal cost. However, it has been held back by our inability to compute the kinetic energy as a functional of the electron density only. We here set out to learn the kinetic energy functional from ground truth provided by the more expensive Kohn-Sham density functional theory. Such learning is confronted with two key challenges: Giving the model sufficient expressivity and spatial context while limiting the memory footprint to afford computations on a GPU; and creating a sufficiently broad distribution of training data to enable iterative density optimization even when starting from a poor initial guess. In response, we introduce KineticNet, an equivariant deep neural network architecture based on point convolutions adapted to the prediction of quantities on molecular quadrature grids. Important contributions include convolution filters with sufficient spatial resolution in the vicinity of the nuclear cusp, an atom-centric sparse but expressive architecture that relays information across multiple bond lengths; and a new strategy to generate varied training data by finding ground state densities in the face of perturbations by a random external potential. KineticNet achieves, for the first time, chemical accuracy of the learned functionals across input densities and geometries of tiny molecules. For two electron systems, we additionally demonstrate OF-DFT density optimization with chemical accuracy.

  • 5 authors
·
May 8, 2023

Deciphering the "chemical" nature of the exotic isotopes of Hydrogen by the MC-QTAIM analysis: The positively charged Muon and the Muonic Helium as new members of the Periodic Table

This report is a primarily survey on the chemical nature of some exotic species containing the positively charged muon and the muonic Helium, i.e., the negatively charged muon plus helium nucleus, as exotic isotopes of hydrogen, using the newly developed multi-component quantum theory of atoms in molecules (MC-QTAIM) analysis, employing ab initio non-Born-Oppenhiemer wavefunctions. Accordingly, the "atoms in molecules" analysis performed on various asymmetric exotic isotopomers of hydrogen molecule, recently detected experimentally [Science 331, 448 (2011)], demonstrates that both the exotic isotopes are capable of forming atoms in molecules and retaining the identity of hydrogen atom. Various derived properties of atomic basins containing muonic helium cast no doubt that apart from its short life time, it is a heavier isotope of hydrogen while the properties of basins containing the positively charged muon are more remote from those of the orthodox hydrogen basins, capable of appreciable donation of electrons as well as large charge polarization; however, with some tolerance, they may be categorized also as hydrogen basins though with a smaller electronegativity. All in all, present study also clearly demonstrates that the MC-QTAIM analysis is an efficient approach to decipher the chemical nature of species containing exotic constituents, hard to be elucidated by experimental and/or alternative theoretical schemes.

  • 2 authors
·
Nov 25, 2013

Influence of hydrogenation on the vibrational density of states of magnetocaloric LaFe_11.4Si_1.6H_{1.6}

We report on the impact of magnetoelastic coupling on the magnetocaloric properties of LaFe_{11.4}Si_{1.6}H_{1.6} in terms of the vibrational density of states, which we determined with ^{57}Fe nuclear resonant inelastic X-ray scattering measurements and with density-functional-theory based first-principles calculations in the ferromagnetic low-temperature and paramagnetic high-temperature phase. In experiments and calculations, we observe pronounced differences in the shape of the Fe-partial VDOS between non-hydrogenated and hydrogenated samples. This shows that hydrogen does not only shift the temperature of the first-order phase transition, but also affects the elastic response of the Fe-subsystem significantly. In turn, the anomalous redshift of the Fe VDOS, observed by going to the low-volume PM phase, survives hydrogenation. As a consequence, the change in the Fe specific vibrational entropy ΔS_lat across the phase transition has the same sign as the magnetic and electronic contribution. DFT calculations show that the same mechanism, which is a consequence of the itinerant electron metamagnetism associated with the Fe subsystem, is effective in both the hydrogenated and he hydrogen-free compounds. Although reduced by 50 % as compared to the hydrogen-free system, the measured change ΔS_lat of 3.2\pm1.9 J/kgK across the FM to PM transition contributes with 35 % significantly and cooperatively to the total isothermal entropy change ΔS_iso. Hydrogenation is observed to induce an overall blueshift of the Fe-VDOS with respect to the H-free compound; this effect, together with the enhanced Debye temperature observed, is a fingerprint of the hardening of the Fe sublattice by hydrogen incorporation. In addition, the mean Debye velocity of sound of LaFe_{11.4}Si_{1.6}H_{1.6} was determined from the NRIXS and the DFT data.

  • 17 authors
·
Nov 24, 2019

Precision measurement of the last bound states in H_2 and determination of the H + H scattering length

The binding energies of the five bound rotational levels J=0-4 in the highest vibrational level v=14 in the X^1Sigma_g^+ ground electronic state of H_2 were measured in a three-step ultraviolet-laser experiment. Two-photon UV-photolysis of H_2S produced population in these high-lying bound states, that were subsequently interrogated at high precision via Doppler-free spectroscopy of the F^1Sigma_g^+ - X^1Sigma_g^+ system. A third UV-laser was used for detection through auto-ionizing resonances. The experimentally determined binding energies were found to be in excellent agreement with calculations based on non-adiabatic perturbation theory, also including relativistic and quantum electrodynamical contributions. The s-wave scattering length of the H + H system is derived from the binding energy of the last bound J=0 level via a direct semi-empirical approach, yielding a value of a_s = 0.2724(5) a_0, in good agreement with a result from a previously followed theoretical approach. The subtle effect of the malpha^4 relativity contribution to a_s was found to be significant. In a similar manner a value for the p-wave scattering volume is determined via the J=1 binding energy yielding a_p = -134.0000(6) a_0^3. The binding energy of the last bound state in H_2, the (v=14, J=4) level, is determined at 0.023(4) cm^{-1}, in good agreement with calculation. The effect of the hyperfine substructure caused by the two hydrogen atoms at large internuclear separation, giving rise to three distinct dissociation limits, is discussed.

  • 3 authors
·
Feb 3, 2025

Rise and Fall of Anderson Localization by Lattice Vibrations: A Time-Dependent Machine Learning Approach

The intricate relationship between electrons and the crystal lattice is a linchpin in condensed matter, traditionally described by the Fr\"ohlich model encompassing the lowest-order lattice-electron coupling. Recently developed quantum acoustics, emphasizing the wave nature of lattice vibrations, has enabled the exploration of previously uncharted territories of electron-lattice interaction not accessible with conventional tools such as perturbation theory. In this context, our agenda here is two-fold. First, we showcase the application of machine learning methods to categorize various interaction regimes within the subtle interplay of electrons and the dynamical lattice landscape. Second, we shed light on a nebulous region of electron dynamics identified by the machine learning approach and then attribute it to transient localization, where strong lattice vibrations result in a momentary Anderson prison for electronic wavepackets, which are later released by the evolution of the lattice. Overall, our research illuminates the spectrum of dynamics within the Fr\"ohlich model, such as transient localization, which has been suggested as a pivotal factor contributing to the mysteries surrounding strange metals. Furthermore, this paves the way for utilizing time-dependent perspectives in machine learning techniques for designing materials with tailored electron-lattice properties.

  • 4 authors
·
May 27, 2024

Water Snowline in Young Stellar Objects with Various Density Structures Using Radiative Transfer Models

Tracing the water snowline in low-mass young stellar objects (YSOs) is important because dust grain growth is promoted and the chemical composition varies at the water snowline, which influences planet formation and its properties. In protostellar envelopes, the water snowline can be estimated as a function of luminosity using a relation derived from radiative transfer models, and these predictions are consistent with observations. However, accurately estimating the water snowline in protoplanetary disks requires new relations that account for the disk structure. We present the relations between luminosity and water snowline using the dust continuum radiative transfer models with various density structures. We adopt two-dimensional density structures for an envelope-only model (Model E), an envelope+disk+cavity model (Model E+D), and a protoplanetary disk model (Model PPD). The relations between the water snowline, where T_dust = 100 K, and the total luminosity, ranging 0.1-1,000 solar luminosity, are well fitted by a power-law relation, R_snow=a * (L/L_solar)^p au. The factor a decreases with increasing disk density, while the power index p has values around 0.5 in all models. As the disk becomes denser, the water snowline forms at smaller radii even at the same luminosity, since dense dust hinders photon propagation. We also explore the effect of viscous heating on the water snowline. In Model PPD with viscous heating, the water snowline shifts outward by a few au up to 15 au, increasing the factor a and decreasing the power index p. In Model E+D with lower disk mass, the effect of viscous heating is negligible, indicating that the disk mass controls the effect. The discrepancy between our models and direct observations provides insights into the recent outburst event and the presence of a disk structure in low-mass YSOs.

  • 4 authors
·
Oct 16, 2025

Hadronic light-by-light contribution to (g-2)_μ from lattice QCD with SU(3) flavor symmetry

We perform a lattice QCD calculation of the hadronic light-by-light contribution to (g-2)_μ at the SU(3) flavor-symmetric point m_π=m_Ksimeq 420,MeV. The representation used is based on coordinate-space perturbation theory, with all QED elements of the relevant Feynman diagrams implemented in continuum, infinite Euclidean space. As a consequence, the effect of using finite lattices to evaluate the QCD four-point function of the electromagnetic current is exponentially suppressed. Thanks to the SU(3)-flavor symmetry, only two topologies of diagrams contribute, the fully connected and the leading disconnected. We show the equivalence in the continuum limit of two methods of computing the connected contribution, and introduce a sparse-grid technique for computing the disconnected contribution. Thanks to our previous calculation of the pion transition form factor, we are able to correct for the residual finite-size effects and extend the tail of the integrand. We test our understanding of finite-size effects by using gauge ensembles differing only by their volume. After a continuum extrapolation based on four lattice spacings, we obtain a_μ^{rm hlbl} = (65.4pm 4.9 pm 6.6)times 10^{-11}, where the first error results from the uncertainties on the individual gauge ensembles and the second is the systematic error of the continuum extrapolation. Finally, we estimate how this value will change as the light-quark masses are lowered to their physical values.

  • 5 authors
·
Jul 12, 2020

Planck intermediate results. LVII. Joint Planck LFI and HFI data processing

We present the NPIPE processing pipeline, which produces calibrated frequency maps in temperature and polarization from data from the Planck Low Frequency Instrument (LFI) and High Frequency Instrument (HFI) using high-performance computers. NPIPE represents a natural evolution of previous Planck analysis efforts, and combines some of the most powerful features of the separate LFI and HFI analysis pipelines. The net effect of the improvements is lower levels of noise and systematics in both frequency and component maps at essentially all angular scales, as well as notably improved internal consistency between the various frequency channels. Based on the NPIPE maps, we present the first estimate of the Solar dipole determined through component separation across all nine Planck frequencies. The amplitude is (3366.6 pm 2.7)μK, consistent with, albeit slightly higher than, earlier estimates. From the large-scale polarization data, we derive an updated estimate of the optical depth of reionization of τ= 0.051 pm 0.006, which appears robust with respect to data and sky cuts. There are 600 complete signal, noise and systematics simulations of the full-frequency and detector-set maps. As a Planck first, these simulations include full time-domain processing of the beam-convolved CMB anisotropies. The release of NPIPE maps and simulations is accompanied with a complete suite of raw and processed time-ordered data and the software, scripts, auxiliary data, and parameter files needed to improve further on the analysis and to run matching simulations.

  • 139 authors
·
Jul 8, 2020

From super-Earths to sub-Neptunes: Observational constraints and connections to theoretical models

We have updated the PlanetS catalog of transiting planets with precise and robust mass and radius measurements and use this catalog to explore mass-radius (M-R) diagrams. On the one hand, we propose new M-R relationships to separate exoplanets into three populations. On the other hand, we explore the transition in radius and density between super-Earths and sub-Neptunes around M-dwarfs and compare them with those orbiting K- and FG-dwarfs. Using Kernel density estimation method with a re-sampling technique, we estimated the normalized density and radius distributions, revealing connections between observations and theories on composition, internal structure, formation, and evolution of these exoplanets orbiting different spectral types. The 30% increase in the number of well-characterized exoplanets orbiting M-dwarfs compared with previous studies shows us that there is no clear gap in either composition or radius between super-Earths and sub-Neptunes. The "water-worlds" around M-dwarfs cannot correspond to a distinct population, their bulk density and equilibrium temperature can be interpreted by several different internal structures and compositions. The continuity in the fraction of volatiles in these planets suggests a formation scenario involving planetesimal or hybrid pebble-planetesimal accretion. We find that the transition between super-Earths and sub-Neptunes appears to happen at different masses (and radii) depending on the spectral type of the star. The maximum mass of super-Earths seems to be close to 10~M_oplus for all spectral types, but the minimum mass of sub-Neptunes increases with the star's mass. This effect, attributed to planet migration, also contributes to the fading of the radius valley for M-planets compared to FGK-planets. While sub-Neptunes are less common around M-dwarfs, smaller ones exhibit lower density than their equivalents around FGK-dwarfs.

  • 5 authors
·
Jul 3, 2024

THEMol dataset: Torsion, Hessian, and Energy of Molecules

We present THEMol (Torsion, Hessian, Energy of Molecules), a massive open-source collection of quantum mechanical properties tailored for closed-shell organic molecules, with up to 50 heavy atoms. THEMol includes a Hessian subset with more than 3 million relaxed geometries with Hessian matrices, a TorsionScan subset with nearly 100 million constrained relaxed geometries with energies and forces, and relaxation-trajectory subsets (HessianRelax and TorsionScanRelax) that together comprise about 3 billion DFT calculations. The chemical space sampling is comprehensive, spanning twelve essential elements and diverse molecular architectures relevant to drug discovery, electrolytes, ionic liquids, and beyond. The dataset also features exhaustive conformational sampling through the TorsionScan and TorsionScanRelax subsets, including comprehensive in-ring and non-ring torsional scans. Furthermore, it contains an extensive library of Hessian matrices, computed at relaxed geometries, to capture critical second-derivative information of the potential energy landscape. Additionally, we supply electron density-derived atomic multipoles computed via the Minimal Basis Iterative Stockholder partition scheme. Organized into five distinct subsets (Hessian, TorsionScan, HessianRelax, TorsionScanRelax, and MBIS), the data encompasses optimized geometries, relaxation trajectories, and derived molecular properties. We anticipate that this massive and diverse dataset will significantly empower the development of highly accurate and transferable molecular potentials.

  • 16 authors
·
May 13

Periodic Trends and a Physics-Based Multistage Search for High-T_c Hydride Superconductors

Hydrogen-rich materials under pressure are candidates for conventional phonon-mediated superconductivity, but first-principles electron--phonon-coupling (EPC) calculations are computationally demanding. We develop an interpretable multistage workflow for prioritizing binary hydride superconductors before full EPC calculations. Using controlled cubic X_mH_n prototypes at 200~GPa, we introduce the spectral moment A_1 as an intermediate measure of electron--phonon perturbation strength. In its linewidth-based construction, A_1 remains finite as harmonic phonons soften, allowing related structures with imaginary harmonic modes to be screened; it does not establish superconductivity or physical realizability for unstable structures. For dynamically stable cubic systems, A_1 correlates strongly with the H-1s density-of-states fraction at the Fermi level, α, a projected Fermi-surface descriptor, β, and atomic number density, ρ. These trends are summarized heuristically by A_1approx hαβρ, where h is framework- and pressure-dependent; the descriptor is used for ranking, not as a universal T_c predictor. We incorporate αβρ and enthalpic competitiveness into a three-stage evolutionary search comprising multiobjective structural screening, harmonic-phonon stability filtering, and coarse density-functional perturbation-theory (DFPT) EPC calculations. Application to more than 100,000 binary hydride structures at 50 and 200~GPa identifies candidates and prioritizes NaH_6 structural families. Higher-accuracy calculations show that Pm3m NaH_6 is dynamically stable down to 50~GPa and has a harmonic Allen--Dynes estimate of T_capprox230~K. The framework combines electronic descriptors with progressively more expensive stability and EPC calculations for scalable hydride exploration.

  • 2 authors
·
Sep 27

Learning the Kohn-Sham map with neural operators for quasi-linear scaling density functional theory

Kohn--Sham density functional theory (DFT) underpins electronic-structure simulations, but repeated orbital diagonalizations lead to cubic scaling, restricting quantum calculations to modest scales only. Eliminating these auxiliary orbitals while retaining Kohn--Sham accuracy is the central goal of orbital-free DFT, but both analytical and machine-learning methods have so far fallen short. Prior learning approaches either try to learn the variational kinetic-energy functionals, which are ill-conditioned, or directly predict the ground state, which extrapolate poorly to larger systems. Instead, we identify the Kohn--Sham map as the right learning target for orbital-free DFT. It maps a Kohn--Sham potential directly to the corresponding density and noninteracting kinetic energy, quantities otherwise obtained through an orbital diagonalization. Focusing on the density component in this work, a domain-invariant SE(3)-equivariant Fourier neural operator learns to predict it from the potential as input on real-space grids, enabling stable quasi-linear scaling SCFs. Trained jointly on 8,504 molecules and solids, a single model generalizes to out-of-distribution organic molecules, insulators, and metals. For the first time, the same method converges SCFs across these systems without explicitly constructing Kohn--Sham orbitals, while reproducing densities, electronic spectra, and structural observables at Kohn--Sham DFT accuracy. Linear-scaling SCFs additionally allow converging magnesium dislocation densities containing up to 82,500 valence electrons on a single GPU.

  • 6 authors
·
Aug 23

PyCDFT: A Python-scriptable library for analytical evaluation of orbital conceptual density (matrix) functional theory

Conceptual density functional theory (CDFT) defines chemical reactivity descriptors as derivatives of the electronic energy with respect to the number of electrons and the external potential, or combinations thereof; in practice, however, researchers almost always replace these derivatives with finite-difference and frontier-orbital approximations, and no common software exists for their analytical evaluation. We present PyCDFT, to our knowledge, the first standardized, open-source, and scriptable code that analytically computes the descriptors of conceptual density (matrix) functional theory for ground and excited states up to second order, including the orbital hardness, the Fukui function and Fukui matrix, and the linear response function, from a single converged mean-field wavefunction imported from virtually any electronic-structure package. The descriptors are obtained from matrix-free, preconditioned Krylov-subspace solutions of the coupled-perturbed self-consistent-field equations for both spin-unpolarized and spin-polarized references, with the work distributed over MPI ranks and all data flowing through a single HDF5 checkpoint file that supports restart, post-processing, and the export of real-space descriptors as cube files for visualization. The design delegates integrals, grids, and exchange-correlation kernels to PySCF and Libxc, keeping the library compact, user-friendly, and interoperable. Worked examples on the ground state of H_2O and a broken-symmetry ΔSCF excited state of NH_3 show that a complete second-order CDFT analysis requires only a few lines of user code.

  • 4 authors
·
Sep 30

Domain Boundaries in a Metallic Distortive Polar Metal

Polar metals are an underexplored material class combining two properties that are typically incompatible, namely a polar crystal structure and reasonable electrical conductivity. These intriguing materials offer a unique combination of properties, potentially relevant to optoelectronics, catalysis, memory devices, among other applications. The distortive polar metal (DPM) subclass forms through a symmetry-lifting phase transformation into a non-centrosymmetric polar crystal structure. In the process, domains with uniform geometric polar directions form, oftentimes separated by domain boundaries with polarity discontinuities arranged in "charged" head-to-head (H-H) or tail-to-tail (T-T) morphologies. To date, only metallic oxide DPM microstructures have been studied. Here we reveal, in the intermetallic DPM Mn_{5}Al_{8}, different surface interactions and electron transfer reactivity at domain boundaries depending on their H-H or T-T character. Variable surface reactivity suggests localized changes in electronic work functions due to an increase (H-H) or decrease (T-T) in the electronic density of states. These findings suggest that metallic DPMs may offer functionalizable domain boundaries and deserve increased attention, given that they allow tunable chemistries and various thermomechanical processing or transformation protocols. Ultimately, this study proposes unconventional metal physics, propelling the discovery and design of advanced electronic materials and devices.

  • 15 authors
·
Nov 20, 2025

Addressing the core-cusp and diversity problem of dwarf and disk galaxies using cold collisionless DARKexp theory

Observed dwarf galaxies tend to have linearly rising rotation curves, which indicate flat density cores in their centers. Furthermore, disk galaxies show a wide range of rotation curves shapes. High resolution simulations of cold collisionless dark matter do not reproduce flat central profiles, or the observed diversity of rotation curve shapes; even hydrodynamic simulations incorporating baryonic feedback cannot do that robustly. However, numerical simulations are not the only way to make predictions about density profiles of equilibrium dark matter halos. A theoretical model based on statistical mechanics shows that maximum entropy solutions for cold collisionless self-gravitating dark matter halos can have a range of inner density profiles, including flat density cores. These theoretical profiles, called DARKexp, have only one shape parameter, and are able to fit the observed rotation curves of galaxies with last measured velocities in the range ~20-200 km/s. Here we present fits to 96 SPARC catalog galaxies, and the Milky Way. DARKexp also provides good fits to the projected stellar density distributions of ultrafaint dwarfs that show cores, suggesting that the dark matter halo hosts could have flat density cores. Thus, DARKexp appears to be able to address the core-cusp problem and the diversity of rotation curves with cold collisionless dark matter alone, without baryonic feedback.

  • 3 authors
·
Feb 21, 2025

AutoKnots: Adaptive Knot Allocation for Spline Interpolation

In astrophysical and cosmological analyses, the increasing quality and volume of astronomical data demand efficient and precise computational tools. This work introduces a novel adaptive algorithm for automatic knots (AutoKnots) allocation in spline interpolation, designed to meet user-defined precision requirements. Unlike traditional methods that rely on manually configured knot distributions with numerous parameters, the proposed technique automatically determines the optimal number and placement of knots based on interpolation error criteria. This simplifies configuration, often requiring only a single parameter. The algorithm progressively improves the interpolation by adaptively sampling the function-to-be-approximated, f(x), in regions where the interpolation error exceeds the desired threshold. All function evaluations contribute directly to the final approximation, ensuring efficiency. While each resampling step involves recomputing the interpolation table, this process is highly optimized and usually computationally negligible compared to the cost of evaluating f(x). We show the algorithm's efficacy through a series of precision tests on different functions. However, the study underscores the necessity for caution when dealing with certain function types, notably those featuring plateaus. To address this challenge, a heuristic enhancement is incorporated, improving accuracy in flat regions. This algorithm has been extensively used and tested over the years. NumCosmo includes a comprehensive set of unit tests that rigorously evaluate the algorithm both directly and indirectly, underscoring its robustness and reliability. As a practical application, we compute the surface mass density Sigma(R) and the average surface mass density Sigma(<R) for Navarro-Frenk-White and Hernquist halo density profiles, which provide analytical benchmarks. (abridged)

  • 4 authors
·
Dec 17, 2024

A Numerical Realization of Suzuki's Weil-Quadratic-Form Operator: The Archimedean Spectral Law, its Universality, and an Operator Form of Weil's Positivity Criterion

This paper presents the first numerical realization of Suzuki's Weil-Quadratic-Form operator, a candidate for the Hilbert--Pólya program linking spectral positivity to the Riemann Hypothesis (RH). Suzuki's 2026 construction was purely theoretical; here, the operator is instantiated via P1 finite-element discretization and Richardson extrapolation. Key results include: (R1) In the prime-free regime, the spectrum follows a closed Archimedean law A_k(a) = log(1/a) + log(k-2) + B_0 + O(a), with B_0 = log q - 2log 2, confirmed to 30-digit precision. (R2) A Mellin double-pole argument proves the head coefficient B(ν) and shows B_0 depends only on the conductor q, independent of the Archimedean parameter. (R2b) The degree d of an L-function appears directly as the logarithmic slope of the spectrum. (R3) Total spectral intensity follows the prime number theorem, S(a) sim (2a)^3/6. (R4) Nontrivial zeros are not eigenvalues but occur in the explicit-formula error term of the prime symbol. (R5) The best-match line σ^*(a) descends toward the critical line. (R6) Weil's positivity criterion is realized in operator form: bounded residual growth corresponds to all zeros on the line, while an injected off-line zero causes exponential blow-up. (R7) The lowest eigenvalue λ_1(a) is strictly positive, decays superexponentially, and passes smoothly through the first prime threshold. (R8) The characteristic function W(a,0;z) is computed for the first time, with all zeros confirmed real. (R9) Indirect traces of GUE statistics appear in the moment structure, even where direct detection is blocked. The authors emphasize that this work does not prove RH. All results are Archimedean and universal, with significance lying in the faithful numerical realization of classical identities rather than new arithmetic.

  • 7 authors
·
Jul 22

The chemical inventory of the planet-hosting disk PDS 70

As host to two accreting planets, PDS 70 provides a unique opportunity to probe the chemical complexity of atmosphere-forming material. We present ALMA Band 6 observations of the PDS~70 disk and report the first chemical inventory of the system. With a spatial resolution of 0.4''-0.5'' (sim50 au), 12 species are detected, including CO isotopologues and formaldehyde, small hydrocarbons, HCN and HCO+ isotopologues, and S-bearing molecules. SO and CH3OH are not detected. All lines show a large cavity at the center of the disk, indicative of the deep gap carved by the massive planets. The radial profiles of the line emission are compared to the (sub-)mm continuum and infrared scattered light intensity profiles. Different molecular transitions peak at different radii, revealing the complex interplay between density, temperature and chemistry in setting molecular abundances. Column densities and optical depth profiles are derived for all detected molecules, and upper limits obtained for the non detections. Excitation temperature is obtained for H2CO. Deuteration and nitrogen fractionation profiles from the hydro-cyanide lines show radially increasing fractionation levels. Comparison of the disk chemical inventory to grids of chemical models from the literature strongly suggests a disk molecular layer hosting a carbon to oxygen ratio C/O>1, thus providing for the first time compelling evidence of planets actively accreting high C/O ratio gas at present time.

  • 6 authors
·
Jan 20, 2021

CHGNet: Pretrained universal neural network potential for charge-informed atomistic modeling

The simulation of large-scale systems with complex electron interactions remains one of the greatest challenges for the atomistic modeling of materials. Although classical force fields often fail to describe the coupling between electronic states and ionic rearrangements, the more accurate ab-initio molecular dynamics suffers from computational complexity that prevents long-time and large-scale simulations, which are essential to study many technologically relevant phenomena, such as reactions, ion migrations, phase transformations, and degradation. In this work, we present the Crystal Hamiltonian Graph neural Network (CHGNet) as a novel machine-learning interatomic potential (MLIP), using a graph-neural-network-based force field to model a universal potential energy surface. CHGNet is pretrained on the energies, forces, stresses, and magnetic moments from the Materials Project Trajectory Dataset, which consists of over 10 years of density functional theory static and relaxation trajectories of sim 1.5 million inorganic structures. The explicit inclusion of magnetic moments enables CHGNet to learn and accurately represent the orbital occupancy of electrons, enhancing its capability to describe both atomic and electronic degrees of freedom. We demonstrate several applications of CHGNet in solid-state materials, including charge-informed molecular dynamics in Li_xMnO_2, the finite temperature phase diagram for Li_xFePO_4 and Li diffusion in garnet conductors. We critically analyze the significance of including charge information for capturing appropriate chemistry, and we provide new insights into ionic systems with additional electronic degrees of freedom that can not be observed by previous MLIPs.

  • 7 authors
·
Feb 27, 2023

Robust Binding Energy Distribution Sampling on Amorphous Solid Water Models. Method testing and validation with NH3, CO and CH4

This work aims to develop a method based on a structurally reliable ice model and a statistically and physico-chemically robust approach for BE distribution inference, with the aim to be applicable to various relevant interstellar species. A multiscale computational approach is presented, with a Molecular Dynamics (MD) Heat & Quench protocol for the amorphous water ice model, and an ONIOM(B3LYP-D3(BJ)/6-311+G**:GFN2-xtb) scheme for the BE inference, with a prime emphasis onto the BE/real system size convergence. The sampling of the binding configurations is twofold, exploring both regularly spaced binding sites, as well as various adsorbate-to-substrate orientations on each locally distinct site. This second source of BE diversity accounts for the local roughness of the potential energy landscape of the substrate. Three different adsorbate test cases are considered, i.e. NH3, CO and CH4, owing to their significance in dust icy mantles, and their distinct binding behavior with water ices. The BE distributions for NH3, CO and CH4 have been inferred, with converged statistics. The distribution for NH3 is better represented by a double Gaussian component profile. Three starting adsorbate orientations per site are required to reach convergence for both Gaussian components of NH3, while 2 orientations are sufficient for CO, and one unique for CH4 (symmetric). Further geometrical and molecular surrounding insights have been provided. These results encompass previously reported results.

  • 4 authors
·
Apr 25, 2025

Robust Determination of the Chemical Potential in the Pole Expansion and Selected Inversion Method for Solving Kohn-Sham density functional theory

Fermi operator expansion (FOE) methods are powerful alternatives to diagonalization type methods for solving Kohn-Sham density functional theory (KSDFT). One example is the pole expansion and selected inversion (PEXSI) method, which approximates the Fermi operator by rational matrix functions and reduces the computational complexity to at most quadratic scaling for solving KSDFT. Unlike diagonalization type methods, the chemical potential often cannot be directly read off from the result of a single step of evaluation of the Fermi operator. Hence multiple evaluations are needed to be sequentially performed to compute the chemical potential to ensure the correct number of electrons within a given tolerance. This hinders the performance of FOE methods in practice. In this paper we develop an efficient and robust strategy to determine the chemical potential in the context of the PEXSI method. The main idea of the new method is not to find the exact chemical potential at each self-consistent-field (SCF) iteration iteration, but to dynamically and rigorously update the upper and lower bounds for the true chemical potential, so that the chemical potential reaches its convergence along the SCF iteration. Instead of evaluating the Fermi operator for multiple times sequentially, our method uses a two-level strategy that evaluates the Fermi operators in parallel. In the regime of full parallelization, the wall clock time of each SCF iteration is always close to the time for one single evaluation of the Fermi operator, even when the initial guess is far away from the converged solution. We demonstrate the effectiveness of the new method using examples with metallic and insulating characters, as well as results from ab initio molecular dynamics.

  • 2 authors
·
Aug 14, 2017

High-throughput calculations of magnetic topological materials

The discoveries of intrinsically magnetic topological materials, including semimetals with a large anomalous Hall effect and axion insulators, have directed fundamental research in solid-state materials. Topological quantum chemistry has enabled the understanding of and the search for paramagnetic topological materials. Using magnetic topological indices obtained from magnetic topological quantum chemistry (MTQC), here we perform a high-throughput search for magnetic topological materials based on first-principles calculations. We use as our starting point the Magnetic Materials Database on the Bilbao Crystallographic Server, which contains more than 549 magnetic compounds with magnetic structures deduced from neutron-scattering experiments, and identify 130 enforced semimetals (for which the band crossings are implied by symmetry eigenvalues), and topological insulators. For each compound, we perform complete electronic structure calculations, which include complete topological phase diagrams using different values of the Hubbard potential. Using a custom code to find the magnetic co-representations of all bands in all magnetic space groups, we generate data to be fed into the algorithm of MTQC to determine the topology of each magnetic material. Several of these materials display previously unknown topological phases, including symmetry-indicated magnetic semimetals, three-dimensional anomalous Hall insulators and higher-order magnetic semimetals. We analyse topological trends in the materials under varying interactions: 60 per cent of the 130 topological materials have topologies sensitive to interactions, and the others have stable topologies under varying interactions. We provide a materials database for future experimental studies and open-source code for diagnosing topologies of magnetic materials.

  • 9 authors
·
Feb 28, 2020

Gas dynamics around a Jupiter mass planet: II. Chemical evolution of circumplanetary material

In an ongoing effort to understand planet formation the link between the chemistry of the protoplanetary disk and the properties of resulting planets have long been a subject of interest. These connections have generally been made between mature planets and young protoplanetary disks through the carbon-to-oxygen (C/O) ratio. In a rare number of systems, young protoplanets have been found within their natal protoplanetary disks. These systems offer a unique opportunity to directly study the delivery of gas from the protoplanetary disk to the planet. In this work we post-process 3D numerical simulations of an embedded Jupiter-massed planet in its protoplanetary disk to explore the chemical evolution of gas as it flows from the disk to the planet. The relevant dust to this chemical evolution is assumed to be small, co-moving grains with a reduced dust-to-gas ratio indicative of the upper atmosphere of a protoplanetary disk. We find that as the gas enters deep into the planet's gravitational well, it warms significantly (up to sim 800 K), releasing all of the volatile content from the ice phase. This change in phase can influence our understanding of the delivery of volatile species to the atmospheres of giant planets. The primary carbon, oxygen, and sulfur carrying ices: CO_2, H_2O, and H_2S are released into the gas phase and along with the warm gas temperatures near the embedded planets lead to the production of unique species like CS, SO, and SO_2 compared to the protoplanetary disk. We compute the column densities of SO, SO_2, CS, and H_2CS in our model and find that their values are consistent with previous observational studies.

  • 3 authors
·
Nov 26, 2024

Complete Neural Electronic Initialization Accelerates Materials DFT

We present the first complete machine learning method for accelerating plane-wave density functional theory (DFT) in materials under the projector augmented wave (PAW) formalism. We formalize seven criteria that a Complete Neural Electronic Initializer must satisfy for practical end-to-end PAW DFT acceleration. Applying these criteria to prior work reveals two missing structure-dependent components, augmentation occupancies and spin initialization, that prevent existing methods from providing complete reference-free initialization. Controlled ablations show that omitting these components can eliminate or reverse the acceleration obtained via models that only predict the smooth valence density. We satisfy these missing requirements by introducing AugNet, the first general equivariant model for PAW augmentation occupancies, and the first general spin density model for materials, which predicts the smooth spin-difference density and spin-difference PAW augmentation occupancies using predicted magnetic moments to constrain the global magnetic state. Combined with existing valence density models, these components satisfy all seven criteria and form a fully reference-free electronic initializer for materials DFT, requiring no electronic quantities from a converged target calculation. Our method reduces end-to-end DFT wall time by up to ~25% on unseen structures while preserving converged energies.

  • 3 authors
·
Sep 17

Creation of single vacancies in hBN with electron irradiation

Understanding electron irradiation effects is vital not only for reliable transmission electron microscopy characterization, but increasingly also for the controlled manipulation of two-dimensional materials. The displacement cross sections of monolayer hBN are measured using aberration-corrected scanning transmission electron microscopy in near ultra-high vacuum at primary beam energies between 50 and 90 keV. Damage rates below 80 keV are up to three orders of magnitude lower than previously measured at edges under poorer residual vacuum conditions where chemical etching appears to have been dominant. Notably, is possible to create single vacancies in hBN using electron irradiation, with boron almost twice as likely as nitrogen to be ejected below 80 keV. Moreover, any damage at such low energies cannot be explained by elastic knock-on, even when accounting for vibrations of the atoms. A theoretical description is developed to account for lowering of the displacement threshold due to valence ionization resulting from inelastic scattering of probe electrons, modelled using charge-constrained density functional theory molecular dynamics. Although significant reductions are found depending on the constrained charge, quantitative predictions for realistic ionization states are currently not possible. Nonetheless, there is potential for defect-engineering of hBN at the level of single vacancies using electron irradiation.

  • 9 authors
·
Mar 1, 2023

Quarks to Cosmos: Particles and Plasma in Cosmological evolution

We describe in the context of the particle physics (PP) standard model (SM) `PP-SM' the understanding of the primordial properties and composition of the Universe in the temperature range 130GeV>T>20keV. The Universe evolution is described using FLRW cosmology. We present a global view on particle content across time and describe the different evolution eras using deceleration parameter q. We follow the arrow of time in the expanding and cooling Universe: After the PP-SM heavies (t, h, W, Z) diminish in abundance below Tsimeq 50GeV, the PP-SM plasma in the Universe is governed by the strongly interacting Quark-Gluon content. Once the temperature drops below Tsimeq 150MeV, quarks and gluons hadronize into strongly interacting matter particles. Rapid disappearance of baryonic antimatter completes at T_B=38.2MeV. We study the ensuing disappearance of strangeness and mesons in general. We show that the different eras defined by particle populations are barely separated from each other with abundance of muons fading out just prior to T=O(2.5)MeV, the era of emergence of the free-streaming neutrinos. We discuss the two relevant fundamental constants controlling the decoupling of neutrinos. We subsequently follow the primordial Universe as it passes through the hot dense electron-positron plasma epoch. The high density of positron antimatter disappears near T=20.3keV: Nuclear reactions occur in the presence of a highly mobile and relatively strongly interacting electron-positron plasma phase. We apply plasma theory methods to describe the strong screening effects between heavy dust particle (nucleons). We analyze the paramagnetic characteristics of the electron-positron plasma when exposed to an external primordial magnetic field.

  • 5 authors
·
Sep 26, 2024

On the statistical theory of self-gravitating collisionless dark matter flow: Scale and redshift variation of velocity and density distributions

This paper studies the scale and redshift variation of density and velocity distributions in self-gravitating collisionless dark matter flow by a halo-based non-projection approach. All particles are divided into halo and out-of-halo particles for redshift variation of distributions. Without projecting particle fields onto a structured grid, the scale variation is analyzed by identifying all particle pairs on different scales r. We demonstrate that: i) Delaunay tessellation can be used to reconstruct the density field. The density correlation, spectrum, and dispersion functions were obtained, modeled, and compared with the N-body simulation; ii) the velocity distributions are symmetric on both small and large scales and are non-symmetric with a negative skewness on intermediate scales due to the inverse energy cascade at a constant rate varepsilon_u; iii) On small scales, the even order moments of pairwise velocity Delta u_L follow a two-thirds law (-varepsilon_ur)^{2/3}, while the odd order moments follow a linear scaling langle(Delta u_L)^{2n+1}rangle=(2n+1)langle(Delta u_L)^{2n}ranglelangleDelta u_Lrangler; iv) The scale variation of the velocity distributions was studied for longitudinal velocities u_L or u_L^{'}, pairwise velocity (velocity difference) Delta u_L=u_L^{'}-u_L and velocity sum Sigma u_L=u^{'}_L+u_L. Fully developed velocity fields are never Gaussian on any scale, despite that they can initially be Gaussian; v) On small scales, u_L and Sigma u_L can be modeled by a X distribution to maximize the system entropy; vi) On large scales, Delta u_L and Sigma u_L can be modeled by a logistic or a X distribution; vii) the redshift variation of the velocity distributions follows the evolution of the X distribution involving a shape parameter alpha(z) decreasing with time.

  • 1 authors
·
Feb 14, 2022

Symbolic Density Estimators for Unnormalized Distributions

Estimating the symbolic or analytical form of probability density functions (PDFs) from observed samples is a fundamental challenge in statistical and computational modelling. This process is critical for deriving interpretable and generalizable relationships characterizing the underlying phenomenon. Traditionally, this estimation depends strongly on domain expertise and prior field-specific knowledge, with experts selecting appropriate functional forms or parametric families based on empirical evidence and theoretical understanding. The coefficients of these forms are then typically determined through parameter estimation. In this paper, we develop a framework for estimating symbolic expressions of unnormalized distributions from observed samples using domain-specific prior knowledge, such as the range of interactions and a predefined set of primitive functions. We integrate deep generative models with symbolic regression (SR), incorporating inductive biases, such as factorizing large distributions, to keep the problem tractable. The deep generative models we examine include likelihood-based models, viz., flow models, and score-based models. Experiments show the effectiveness of the proposed framework for estimating density functions for multivariate toy distributions as well as lattices from computational physics, namely, XY model and ϕ^4 theory. When applied to the renormalization problem in ϕ^4 theory, the proposed framework estimates compact symbolic approximations of the hamiltonian function at different scales directly from samples, yielding expressions that may be challenging to derive using traditional perturbative or analytic approaches in nonperturbative settings.

  • 4 authors
·
Oct 6

Grad DFT: a software library for machine learning enhanced density functional theory

Density functional theory (DFT) stands as a cornerstone method in computational quantum chemistry and materials science due to its remarkable versatility and scalability. Yet, it suffers from limitations in accuracy, particularly when dealing with strongly correlated systems. To address these shortcomings, recent work has begun to explore how machine learning can expand the capabilities of DFT; an endeavor with many open questions and technical challenges. In this work, we present Grad DFT: a fully differentiable JAX-based DFT library, enabling quick prototyping and experimentation with machine learning-enhanced exchange-correlation energy functionals. Grad DFT employs a pioneering parametrization of exchange-correlation functionals constructed using a weighted sum of energy densities, where the weights are determined using neural networks. Moreover, Grad DFT encompasses a comprehensive suite of auxiliary functions, notably featuring a just-in-time compilable and fully differentiable self-consistent iterative procedure. To support training and benchmarking efforts, we additionally compile a curated dataset of experimental dissociation energies of dimers, half of which contain transition metal atoms characterized by strong electronic correlations. The software library is tested against experimental results to study the generalization capabilities of a neural functional across potential energy surfaces and atomic species, as well as the effect of training data noise on the resulting model accuracy.

  • 5 authors
·
Sep 22, 2023

MACE-POLAR-1: A Polarisable Electrostatic Foundation Model for Molecular Chemistry

Accurate modelling of electrostatic interactions and charge transfer is fundamental to computational chemistry, yet most machine learning interatomic potentials (MLIPs) rely on local atomic descriptors that cannot capture long-range electrostatic effects. We present a new electrostatic foundation model for molecular chemistry that extends the MACE architecture with explicit treatment of long-range interactions and electrostatic induction. Our approach combines local many-body geometric features with a non-self-consistent field formalism that updates learnable charge and spin densities through polarisable iterations to model induction, followed by global charge equilibration via learnable Fukui functions to control total charge and total spin. This design enables an accurate and physical description of systems with varying charge and spin states while maintaining computational efficiency. Trained on the OMol25 dataset of 100 million hybrid DFT calculations, our models achieve chemical accuracy across diverse benchmarks, with accuracy competitive with hybrid DFT on thermochemistry, reaction barriers, conformational energies, and transition metal complexes. Notably, we demonstrate that the inclusion of long-range electrostatics leads to a large improvement in the description of non-covalent interactions and supramolecular complexes over non-electrostatic models, including sub-kcal/mol prediction of molecular crystal formation energy in the X23-DMC dataset and a fourfold improvement over short-ranged models on protein-ligand interactions. The model's ability to handle variable charge and spin states, respond to external fields, provide interpretable spin-resolved charge densities, and maintain accuracy from small molecules to protein-ligand complexes positions it as a versatile tool for computational molecular chemistry and drug discovery.

  • 13 authors
·
Feb 22

Weyl, Dirac and high-fold chiral fermions in topological quantum materials

Quantum materials hosting Weyl fermions have opened a new era of research in condensed matter physics. First proposed in 1929 in particle physics, Weyl fermions have yet to be observed as elementary particles. In 2015, Weyl fermions were detected as collective electronic excitations in the strong spin-orbit coupled material tantalum arsenide, TaAs. This discovery was followed by a flurry of experimental and theoretical explorations of Weyl phenomena in materials. Weyl materials naturally lend themselves to the exploration of the topological index associated with Weyl fermions and their divergent Berry curvature field, as well as the topological bulk-boundary correspondence giving rise to protected conducting surface states. Here, we review the broader class of Weyl topological phenomena in materials, starting with the observation of emergent Weyl fermions in the bulk and of Fermi arc states on the surface of the TaAs family of crystals by photoemission spectroscopy. We then discuss some of the exotic optical and magnetic responses observed in these materials, as well as the progress in developing some of the related chiral materials. We discuss the conceptual development of high-fold chiral fermions, which generalize Weyl fermions, and we review the observation of high-fold chiral fermion phases by taking the rhodium silicide, RhSi, family of crystals as a prime example. Lastly, we discuss recent advances in Weyl-line phases in magnetic topological materials. With this Review, we aim to provide an introduction to the basic concepts underlying Weyl physics in condensed matter, and to representative materials and their electronic structures and topology as revealed by spectroscopic studies. We hope this work serves as a guide for future theoretical and experimental explorations of chiral fermions and related topological quantum systems with potentially enhanced functionalities.

  • 6 authors
·
Mar 2, 2021

Fully Gapped Superconductivity in the Nonsymmorphic Centrosymmetric Superconductor In2Bi

The nature of superconductivity in nonsymmorphic In2Bi remains an open question, with ongoing debate over whether it exhibits conventional (BCS-like) or unconventional superconductivity. Here we report the physical characteristics and superconducting properties of polycrystalline In2Bi. Measurements of electrical resistivity, magnetization, penetration depth, and specific heat demonstrate the superconducting transition temperature about 6 K, with a sharp transition in resistivity (Delta_Tc = 0.1 K) and RRR = 57.32, reflecting the high quality of the sample. The upper critical field Hc2(0) obtained from resistivity and magnetization measurements are in good agreement with each other and are smaller than the Pauli limit, suggesting orbital limited mechanism. The coherence length = 35.43 nm, penetration depth = 101.9 nm and electron-phonon coupling constant = 1.05 suggest strongly coupled type-II superconductivity. For T<Tc, Delta_lambda(T) is best described by an s-wave BCS model and does not have any power law dependency with T, which is expected for a nodeless superconducting order parameter. The superfluid density reveals a fully gapped superconductivity with a gap of 2Delta_0/kBTc = 4.02. In the superconducting state, the electronic specific heat is best described by an s-wave BCS model with a gap of 2Delta_0/kBTc = 4.05. All these results from the present study indicate that In2Bi is a typical type-II,BCS-like, strongly coupled, and fully gapped superconductor in the dirty limit.

  • 6 authors
·
Oct 15

Amplitude Encoding of Slater-Type Orbitals via Matrix Product States: Efficient State Preparation and Integral Evaluation on Quantum Hardware

Slater-type orbitals (STOs) provide the physically correct description of atomic wavefunctions but have been largely replaced by Gaussian-type orbitals in computational chemistry due to the lack of closed-form multi-center integrals. We present a systematic study of amplitude encoding of STOs on quantum computers using matrix product states (MPS). For one-dimensional orbital functions of the form p_d(x) e^{-ζx}, we derive analytical MPS constructions with constant bond dimension χ= d + 1, requiring O(n) classical and quantum resources for n-qubit registers with no grid sampling. We demonstrate a complete one-electron integral pipeline -- overlap, kinetic energy, and nuclear attraction -- in one dimension, validating the overlap and kinetic energy on IBM Heron processors at 5~qubits with 0.67\% hardware-induced error using Zero-Noise Extrapolation. In three dimensions, we compute multi-center overlap integrals between 1s and 2s orbitals in Cartesian coordinates with 0.02\% discretization error at 18~qubits. A systematic entanglement analysis reveals that the MPS bond dimension of three-dimensional STOs in Cartesian coordinates saturates with increasing grid resolution -- reaching sim138 for the hydrogen 1s orbital at 12~qubits per coordinate -- establishing bounded encoding complexity rather than the exponential scaling initially expected. The SVD truncation threshold provides a practical resource parameter, reducing the bond dimension to 39 at threshold 10^{-6} with negligible accuracy loss. These results map the entanglement landscape for amplitude encoding of atomic orbitals and establish MPS-based state preparation as a viable path toward exact STO basis sets on quantum computers.

  • 1 authors
·
Apr 28

Importance of Electronic Entropy for Machine Learning Interatomic Potentials

Machine learning interatomic potentials (MLIPs) enable large-scale atomistic simulations but remain challenged in describing mixed-valence materials where charge ordering strongly influences thermodynamic stability. Here we investigate the role of electronic entropy in MLIP structural optimization of the battery cathode material NaFePO4. We show that conventional MLIPs fail to reproduce the correct stability of intermediate Na concentrations because structural optimization leads to incorrect Fe^{2+}/Fe^{3+} charge assignments, resulting in erroneous energy ordering and convex-hull predictions. Analysis of magnetic moments during structural optimization reveals that MLIPs are unable to capture electronic entropy associated with charge ordering. To address this limitation, we introduce an approach that embeds charge-state information directly into the MLIP representation by distinguishing between Fe^{2+} and Fe^{3+} environments during training. Retraining CHGNet, cPaiNN, and MACE with this representation enables accurate structural optimization, correct identification of charge ordering, and improved agreement with density functional theory convex hulls. Our results demonstrate that incorporating electronic entropy into MLIP representations is essential for modeling charge-disordered materials and provide a practical framework for extending MLIP simulations to mixed-valence transition-metal systems.

  • 5 authors
·
Mar 26

Two 100 TeV neutrinos coincident with the Seyfert galaxy NGC 7469

In 2013, the IceCube collaboration announced the detection of a diffuse high-energy astrophysical neutrino flux. The origin of this flux is still largely unknown. The most significant individual source is the close-by Seyfert galaxy NGC 1068 at 4.2-sigma level with a soft spectral index. To identify sources based on their counterpart, IceCube releases realtime alerts corresponding to neutrinos with a high probability of astrophysical origin. We report here the spatial coincidence of two neutrino alerts, IC220424A and IC230416A, with the Seyfert galaxy NGC 7469 at a distance of 70 Mpc. We evaluate, a-posteriori, the chance probability of such a coincidence and discuss this source as a potential neutrino emitter based on its multi-wavelength properties and in comparison to NGC 1068 by performing a Goodness-of-Fit test. The test statistic is derived from a likelihood ratio that includes the neutrino angular uncertainty and the source distance. We apply this test first to a catalog of AGN sources and second to a catalog of Seyfert galaxies only. Our a-posteriori evaluation excludes the possibility of an accidental spatial coincidence of both neutrinos with the Seyfert galaxy NGC 7469 at 3.2-sigma level, leaving open the possibility that either one or both neutrinos originated from the source. To be compatible with non-detections of TeV neutrinos, the source would need to have a hard spectral index.

  • 4 authors
·
Mar 6, 2024

Estimation under group actions: recovering orbits from invariants

We study a class of orbit recovery problems in which we observe independent copies of an unknown element of R^p, each linearly acted upon by a random element of some group (such as Z/p or SO(3)) and then corrupted by additive Gaussian noise. We prove matching upper and lower bounds on the number of samples required to approximately recover the group orbit of this unknown element with high probability. These bounds, based on quantitative techniques in invariant theory, give a precise correspondence between the statistical difficulty of the estimation problem and algebraic properties of the group. Furthermore, we give computer-assisted procedures to certify these properties that are computationally efficient in many cases of interest. The model is motivated by geometric problems in signal processing, computer vision, and structural biology, and applies to the reconstruction problem in cryo-electron microscopy (cryo-EM), a problem of significant practical interest. Our results allow us to verify (for a given problem size) that if cryo-EM images are corrupted by noise with variance σ^2, the number of images required to recover the molecule structure scales as σ^6. We match this bound with a novel (albeit computationally expensive) algorithm for ab initio reconstruction in cryo-EM, based on invariant features of degree at most 3. We further discuss how to recover multiple molecular structures from mixed (or heterogeneous) cryo-EM samples.

  • 6 authors
·
Jun 12, 2023

Machine-learning enabled thermodynamic model for the design of new rare-earth compounds

We employ a descriptor based machine-learning approach to assess the effect of chemical alloying on formation-enthalpy of rare-earth intermetallics. Application of machine-learning approaches in rare-earth intermetallic design have been sparse due to limited availability of reliable datasets. In this work, we developed an `in-house' rare-earth database with more than 600+ compounds, each entry was populated with formation enthalpy and related atomic features using high-throughput density-functional theory (DFT). The SISSO (sure independence screening and sparsifying operator) based machine-learning method with meaningful atomic features was used for training and testing the formation enthalpies of rare earth compounds. The complex lattice function coupled with the machine-learning model was used to explore the effect of transition metal alloying on the energy stability of Ce based cubic Laves phases (MgCu_{2} type). The SISSO predictions show good agreement with high-fidelity DFT calculations and X-ray powder diffraction measurements. Our study provides quantitative guidance for compositional considerations within a machine-learning model and discovering new metastable materials. The electronic-structure of Ce-Fe-Cu based compound was also analyzed in-depth to understand the electronic origin of phase stability. The interpretable analytical models in combination with density-functional theory and experiments provide a fast and reliable design guide for discovering technologically useful materials.

  • 5 authors
·
Mar 3, 2022

Combining Electron-Phonon and Dynamical Mean-Field Theory Calculations of Correlated Materials: Transport in the Correlated Metal Sr_2RuO_4

Electron-electron (e-e) and electron-phonon (e-ph) interactions are challenging to describe in correlated materials, where their joint effects govern unconventional transport, phase transitions, and superconductivity. Here we combine first-principles e-ph calculations with dynamical mean field theory (DMFT) as a step toward a unified description of e-e and e-ph interactions in correlated materials. We compute the e-ph self-energy using the DMFT electron Green's function, and combine it with the e-e self-energy from DMFT to obtain a Green's function including both interactions. This approach captures the renormalization of quasiparticle dispersion and spectral weight on equal footing. Using our method, we study the e-ph and e-e contributions to the resistivity and spectral functions in the correlated metal Sr_2RuO_4. In this material, our results show that e-e interactions dominate transport and spectral broadening in the temperature range we study (50-310~K), while e-ph interactions are relatively weak and account for only sim10\% of the experimental resistivity. We also compute effective scattering rates, and find that the e-e interactions result in scattering several times greater than the Planckian value k_BT, whereas e-ph interactions are associated with scattering rates lower than k_BT. Our work demonstrates a first-principles approach to combine electron dynamical correlations from DMFT with e-ph interactions in a consistent way, advancing quantitative studies of correlated materials.

  • 5 authors
·
Apr 13, 2023

Enabling Domain-Specific Atomistic Models: A Machine Learning Potential for the Solid Acid Family

Machine-learned interatomic potentials trained across the periodic table have made atomistic simulation broadly accessible, and specializing them to a single compound class is widely expected to improve accuracy. Yet examples remain scarce, and fewer still surpass universal models in speed or reach a higher level of electronic-structure theory. Here we present a potential that is universal within the class of water-free solid-state hydrogen-bond network mediated proton conductors rather than across chemistry and a database of 4.4 million first-principles configurations spanning 55 materials. It surpasses leading general-purpose potentials across this domain, recovering measured activation energies and the ordering of anion rotational dynamics that those models miss; agreement on static structure does not imply agreement on transport. Accuracy falls for compositions far from the training set but stays competitive for close structural relatives, and a higher level of electronic-structure theory is reached with a few hundred additional configurations per material. We further introduce a compact variant carrying a fifth of the parameters, faster still and yet more accurate than every general-purpose model tested. It sustains more than a quarter of a million atoms on a single graphics processor, placing grain boundaries and the transition into the highly conducting phase within reach, and making a quantum treatment of the protons affordable. Reference accuracy and accessible system size thus become largely independent, offering a template for other compound classes.

  • 3 authors
·
Sep 28

Towards A Universally Transferable Acceleration Method for Density Functional Theory

Recently, sophisticated deep learning-based approaches have been developed for generating efficient initial guesses to accelerate the convergence of density functional theory (DFT) calculations. While the actual initial guesses are often density matrices (DM), quantities that can convert into density matrices also qualify as alternative forms of initial guesses. Hence, existing works mostly rely on the prediction of the Hamiltonian matrix for obtaining high-quality initial guesses. However, the Hamiltonian matrix is both numerically difficult to predict and intrinsically non-transferable, hindering the application of such models in real scenarios. In light of this, we propose a method that constructs DFT initial guesses by predicting the electron density in a compact auxiliary basis representation using E(3)-equivariant neural networks. Trained on small molecules with up to 20 atoms, our model is able to achieve an average 33.3% self-consistent field (SCF) step reduction on systems up to 60 atoms, substantially outperforming Hamiltonian-centric and DM-centric models. Critically, this acceleration remains nearly constant with increasing system sizes and exhibits strong transferring behaviors across orbital basis sets and exchange-correlation (XC) functionals. To the best of our knowledge, this work represents the first and robust candidate for a universally transferable DFT acceleration method. We are also releasing the SCFbench dataset and its accompanying code to facilitate future research in this promising direction.

  • 6 authors
·
Sep 29, 2025

Evidence for Widespread Hydrogen Sequestration within the Moon's South Polar Cold Traps

The measured neutron flux from the Moons south polar region shows evidence of locally enhanced hydrogen concentrations, likely in the form of water ice, within most permanently shadowed regions (PSR), poleward of 77 deg S latitude. Results are consistent with the original findings of Watson et al, 1961, which found that the PSRs cryogenic surfaces create exclusive conditions for the sequestration of water ice, due to their extremely low sublimation rates. Widespread PSR hydrogenation is demonstrated in several studies by showing that the contrasting PSR area distribution is being instrumentally blurred. The PSRs expected hydrogen observations are correlated by their area fraction of the fixed 30 km diameter footprint area of the Collimated Sensor for Epithermal Neutrons (CSETN), which is part of the Lunar Exploration Neutron Detector (LEND) onboard the Lunar Reconnaissance Orbiter (LRO). The correlation indicates that the PSRs are similarly hydrogenated, with an expected concentration = 0.27 wt%, relative to that of the anhydrous reference terrain (lower bounds). Hydrogen concentrations are demonstrated to be correlated to maximum temperature distributions within the basins of Haworth, Shoemaker and Faustini PSRs. Cabeus-1 PSR shows an anomalously enhanced hydrogen concentration indicating a second process contributes to its hydrogen budget. Results are consistent with ongoing processes that introduce volatiles to the surface including outgassing, solar wind production with regolith silicates, and mixing from small scale meteor impacts and diurnal temperature variation. We validate the bandpass filter used to subtract CSETNs detection of uncollimated neutrons with profiles of several PSRs neutron suppression before and after processing. Keywords: Moon, Epithermal Neutron, Hydrogen, Water, Ice, Volatiles, LRO, LEND, Diviner, LOLA

  • 8 authors
·
Mar 7, 2023

Competition of Exchange and Correlation Energies in Two-Dimensional N-component Electron Gas Ferromagnetism

Motivated by recent observations of symmtry broken phases in lightly-doped multilayer graphene, we investigate magnetic phase transitions in a generalized electron gas model with four-component electron spin. This model simplifies the problem with a parabolic dispersion band, abstracting away the details of the graphene band structure to focus solely on the effects of the Coulomb interaction. We report four findings: 1) In the Hartree-Fock approximation, we observe that the paramagnetic state undergoes a sequence of density-driven, first-order phase transitions, progressively depopulating electrons from each spin component until achieving complete polarization within a very narrow density window where 1.2<r_s<2 (r_s being the electron gas parameter). 2) Further incorporating the correlation energy via the Bohm-Pines random-phase approximation shows that the cascade of transitions obtained within Hartree-Fock approximation is replaced by a single ferromagnetic phase transition at r_s = 6.12. 3) The disappearance of cascade is due to the correlation energy difference between the four-component paramagnetic state and symmetry-broken phases, which is nearly an order of magnitude more negative than the corresponding Hartree-Fock energy difference for 1.2 < r_s < 2. 4) The transition from the paramagnetic state to the fully polarized state at r_s=6.12 is governed by the balance between exchange and correlation energies, a competition that cannot be captured by mean-field approximations to models featuring effective (density-dependent) delta-function interactions, such as the Stoner model. We use the insights from our model to comment on the phase diagram of multilayer graphene electron gas.

  • 3 authors
·
Jul 1, 2024

Magnetic fields in the infrared dark cloud G34.43+0.24

We present the B-fields mapped in IRDC G34.43+0.24 using 850\,μm polarized dust emission observed with the POL-2 instrument at JCMT. We examine the magnetic field geometries and strengths in the northern, central, and southern regions of the filament. The overall field geometry is ordered and aligned closely perpendicular to the filament's main axis, particularly in regions containing the central clumps MM1 and MM2, whereas MM3 in the north has field orientations aligned with its major axis. The overall field orientations are uniform at large (POL-2 at 14arcsec and SHARP at 10arcsec) to small scales (TADPOL at 2.5arcsec and SMA at 1.5arcsec) in the MM1 and MM2 regions. SHARP/CSO observations in MM3 at 350\,μm from Tang et al. show a similar trend as seen in our POL-2 observations. TADPOL observations demonstrate a well-defined field geometry in MM1/MM2 consistent with MHD simulations of accreting filaments. We obtained a plane-of-sky magnetic field strength of 470pm190\,μG, 100pm40\,μG, and 60pm34\,μG in the central, northern and southern regions of G34, respectively, using the updated Davis-Chandrasekhar-Fermi relation. The estimated value of field strength, combined with column density and velocity dispersion values available in the literature, suggests G34 to be marginally critical with criticality parameter rm λ values 0.8pm0.4, 1.1pm0.8, and 0.9pm0.5 in the central, northern, and southern regions, respectively. The turbulent motions in G34 are sub-Alfvénic with Alfvénic Mach numbers of 0.34pm0.13, 0.53pm0.30, and 0.49pm0.26 in the three regions. The observed aligned B-fields in G34.43+0.24 are consistent with theoretical models suggesting that B-fields play an important role in guiding the contraction of the cloud driven by gravity.

  • 14 authors
·
Aug 8, 2019

Harnessing Structural Disorder: Unraveling Hydrogen Evolution in Monolayer Amorphous Carbon via First-Principles Simulations and Machine-Learned Potentials

Disorder and defective coordination in the catalytic plane are crucial for enhancing the Hydrogen Evolution Reaction (HER) on two-dimensional catalysts. Amorphous materials are disordered, making them catalytically adaptive for many reactions. In this work, the HER capabilities of Monolayer Amorphous Carbon (MAC) were studied in comparison with crystalline carbon derivatives, such as pristine graphene (GE) and graphyne derivatives. MAC generated from melt-quench simulations revealed a diverse framework of predominantly sp2 and sp3 carbons with numerous 5-, 6-, and 7-membered rings. Density Functional Theory (DFT) calculations investigated free-energy variations in hydrogen adsorption for each material. According to Sabatier's principle, optimum activity is achieved when the Gibbs free energy (Delta GH) change approaches zero. Crystalline carbon materials possess limited active sites, with beta-graphyne showing the best Delta GH value of +0.34 eV. The adsorption study for MAC was conducted in 30 distinct local environments, where core structural properties were analyzed against varying radii. Calculations showed a Delta GH distribution for MAC ranging from -0.02 eV to +1.35 eV. To evaluate activity across the entire MAC surface, a MACE MLIP foundation model was finetuned, achieving optimal energy and force fitting of 1.67 meV/atom and 29.15 meV/A, respectively. The MLIP predicted Delta GH values from -0.91 eV to +1.70 eV, with approximately 15% of sites exhibiting values below +0.25 eV. Feature analysis revealed that 7-membered rings, curvature, and ripple height enhance HER activity. Our findings suggest that, with careful optimization of local features, MAC can be tuned to compete with noble metal catalysts.

  • 3 authors
·
May 7

Molecular Implementation of the Machine-Learned Skala Exchange-Correlation Functional in CP2K through GauXC

Machine-learned exchange--correlation (XC) functionals offer a route to improve Kohn--Sham density-functional theory without incurring the cost of explicitly correlated electronic-structure methods. Their use in production simulation codes, however, requires a well-defined mapping between the learned model and the host-code density representation. We formulate and implement a Skala-1.1 interface in CP2K through the external GauXC library. CP2K supplies the geometry, Gaussian basis, spin-resolved atomic-orbital density matrix, and communicator, while GauXC evaluates the XC energy, atomic-orbital potential matrix, and available nuclear derivatives. The interface accepts both all-electron and valence-only density matrices. The latter may arise from separable dual-space pseudopotentials or molecular effective-core potentials. Implementation errors are isolated from functional differences by comparing the Perdew--Burke--Ernzerhof (PBE) functional evaluated through GauXC with native CP2K PBE. The resulting interface gives consistent energies, forces validated against finite-difference total-energy checks, and force-based molecular-virial diagnostics for representative molecular cases. The dietGMTKN55 benchmark suite is evaluated with an all-electron Gaussian augmented plane-wave treatment for elements up to bromine and def2 effective-core potentials for the heavier elements. The resulting aggregate mean absolute deviation of 1.255 kcal/mol is within 0.020 kcal/mol of the corresponding Skala reference value of 1.235 kcal/mol. This work establishes a validated molecular implementation of Skala in CP2K through GauXC.

  • 9 authors
·
Aug 18

Detection of magnetic fields in superclusters of galaxies

Magnetic fields in large scale structure filaments beyond galaxy clusters remain poorly understood. Superclusters offer a unique setting to study these low density environments, where weak signals make detection challenging. The Faraday rotation measure (RM) of polarized sources along supercluster lines of sight helps constrain magnetic field properties in these regions. This study aims to determine magnetic field intensity in low density environments within superclusters using RM measurements at different frequencies. We analyzed three nearby (z<0.1) superclusters, Corona Borealis, Hercules, and Leo, where polarization observations were available at 1.4 GHz and 144 MHz. Our catalogue includes 4497 polarized background sources with RM values from literature and unpublished 144 MHz data. We constructed 3D density cubes for each supercluster to estimate density at RM measurement locations. By grouping RM values into three density bins (outskirts, filaments, and nodes) we examined RM variance linked to mean density. We found an RM variance excess of 2.5 \pm 0.5 rad^2 m^{-4} between the lowest-density regions outside the supercluster and the low-density filamentary regions within. This suggests an intervening magnetic field in the supercluster filaments. Modeling the RM variance with a single scale, randomly oriented magnetic field, we constrained the line of sight magnetic field to B_{//} = 19^{+50}_{-8} nG after marginalizing over reversal scale and path length. Our findings align with previous studies of large scale structure filaments, suggesting that adiabatic compression alone (B_{||} \sim 2 nG) cannot fully explain the observed field strengths. Other amplification mechanisms likely contribute to the evolution of magnetic fields in superclusters.

  • 6 authors
·
Mar 10, 2025

Solar System Elemental Abundances from the Solar Photosphere and CI-Chondrites

Solar photospheric abundances and CI-chondrite compositions are reviewed and updated to obtain representative solar system abundances of the elements and their isotopes. The new photospheric abundances obtained here lead to higher solar metallicity. Full 3D NLTE photospheric analyses are only available for 11 elements. A quality index for analyses is introduced. For several elements, uncertainties remain large. Protosolar mass fractions are H (X = 0.7060), He (Y = 0.2753), and for metals Li to U (Z = 0.0187). The protosolar (C+N)/H agrees within 13% with the ratio for the solar core from the Borexino experiment. Elemental abundances in CI-chondrites were screened by analytical methods, sample sizes, and evaluated using concentration frequency distributions. Aqueously mobile elements (e.g., alkalis, alkaline earths, etc.) often deviate from normal distributions indicating mobilization and/or sequestration into carbonates, phosphates, and sulfates. Revised CI-chondrite abundances of non-volatile elements are similar to earlier estimates. The moderately volatile elements F and Sb are higher than before, as are C, Br and I, whereas the CI-abundances of Hg and N are now significantly lower. The solar system nuclide distribution curves of s-process elements agree within 4% with s-process predictions of Galactic chemical evolution models. P-process nuclide distributions are assessed. No obvious correlation of CI-chondritic to solar elemental abundance ratios with condensation temperatures is observed, nor is there one for ratios of CI-chondrites/solar wind abundances.

  • 3 authors
·
Feb 14, 2025

Origin of the inhomogeneous linewidth in a solid state ^{229}Th:CaF_2 nuclear clock

Narrow linewidth (high-Q) quantum discriminators are essential for realizing solid-state ^{229}Th nuclear clocks, yet the observed transition linewidths remain at the tens-to-hundreds-of-kilohertz level, far exceeding the sub-Hertz linewidth set by the radiative lifetime of the nuclear isomer. Here, we investigate the origin of this broadening in ^{229}Th:CaF_2 through systematic measurements of the linewidth as functions of temperature, thorium concentration, and quadrupole state, accompanied by theoretical analysis and first-principle simulations. We find that the linewidth is independent of temperature, increases linearly with thorium concentration, and depends strongly on the quadrupole state. Data analysis identifies variations of the local electric-field gradient (EFG) as the dominant source of inhomogeneous broadening and reveals that the EFG disorder increases linearly with thorium concentration. The observed Lorentzian line shapes and linewidth linear concentration dependence are explained naturally from the 1/r^3 scaling of a random distribution of long-range dopant-induced perturbations. Complementary atomistic and ab initio density-functional-theory calculations reproduce these characteristic features and provide insights into the microscopic defect configurations responsible for the broadening. These results establish the dominant broadening mechanism in solid-state ^{229}Th and provide guidance for engineering nuclear-clock materials with reduced inhomogeneous broadening.

  • 10 authors
·
Oct 2

Planck 2018 results. VI. Cosmological parameters

We present cosmological parameter results from the final full-mission Planck measurements of the CMB anisotropies. We find good consistency with the standard spatially-flat 6-parameter LambdaCDM cosmology having a power-law spectrum of adiabatic scalar perturbations (denoted "base LambdaCDM" in this paper), from polarization, temperature, and lensing, separately and in combination. A combined analysis gives dark matter density Omega_c h^2 = 0.120pm 0.001, baryon density Omega_b h^2 = 0.0224pm 0.0001, scalar spectral index n_s = 0.965pm 0.004, and optical depth tau = 0.054pm 0.007 (in this abstract we quote 68,% confidence regions on measured parameters and 95,% on upper limits). The angular acoustic scale is measured to 0.03,% precision, with 100theta_*=1.0411pm 0.0003. These results are only weakly dependent on the cosmological model and remain stable, with somewhat increased errors, in many commonly considered extensions. Assuming the base-LambdaCDM cosmology, the inferred late-Universe parameters are: Hubble constant H_0 = (67.4pm 0.5)km/s/Mpc; matter density parameter Omega_m = 0.315pm 0.007; and matter fluctuation amplitude sigma_8 = 0.811pm 0.006. We find no compelling evidence for extensions to the base-LambdaCDM model. Combining with BAO we constrain the effective extra relativistic degrees of freedom to be N_{rm eff} = 2.99pm 0.17, and the neutrino mass is tightly constrained to sum m_nu< 0.12eV. The CMB spectra continue to prefer higher lensing amplitudes than predicted in base -LambdaCDM at over 2,sigma, which pulls some parameters that affect the lensing amplitude away from the base-LambdaCDM model; however, this is not supported by the lensing reconstruction or (in models that also change the background geometry) BAO data. (Abridged)

  • 182 authors
·
Jul 17, 2018

R_{rm e}, or not R_{rm e}: Developing R_5equiv R_{-2} as a scale radius for galaxy sizes, masses, and mass-to-light ratios

The effective half-light radius R_{rm e} marks an arbitrary 50-per-cent light boundary, and scaling relations involving such {\it effective} radii and their associated surface brightnesses, μ_{rm e}, systematically (and undesirably) vary as the percentage changes. Here, the projected radius R_5equiv R_{-2}, where the logarithmic slope of the surface-brightness and intensity profile equals 5.00,mag,dex^{-1} and -2, respectively, and where the luminosity contributed per logarithmic radial interval is maximal, is developed as an alternative. It can be measured non-parametrically or with a parametrized fit. For the Sérsic R^{1/n} family, the exact relation R_5=(2n/b_n)^n,R_{rm e} is derived, with R_5/R_{rm e}rm e^{1/6}approx1.181 as nrightarrowinfty. Reparameterizing the (now b_n-free) R^{1/n} model in terms of the observable pair (R_5,μ_5) removes the non-linear R_{rm e}--n coupling, and because the local slope is 5,mag,dex^{-1} at R_5, correlated measurement errors in R_5 and μ_5 largely cancel when deriving the inferred total magnitude. Additionally, an exact single-integral identity is provided to relate any projected light fraction to the fraction within a sphere of the same radius. The directly observable R_5 is shown to be connected, through a weakly n-dependent factor to the anisotropy-insensitive intrinsic radius r_{-3}, yielding a refined n-dependent Wolf-type mass estimator M_{-3} and spatial mass-to-light ratio (M_{rm dyn}/L)_{-3}. Specifically, M_{-3}approx4,G^{-1}langleσ_{rm los}^2rangle,R_{-2}approx4.72,G^{-1}langleσ_{rm los}^2rangle,R_{rm e}. Past half-light substitutions in dynamical mass estimators introduce systematic Sérsic-dependent offsets of 12--18 per~cent in enclosed mass and offsets spanning >20 per~cent in the mass-to-light ratio.

  • 1 authors
·
Aug 21

PDRs4All. XII. FUV-driven formation of hydrocarbon radicals and their relation with PAHs

We present subarcsecond-resolution ALMA mosaics of the Orion Bar PDR in [CI] 609 um, C2H (4-3), and C18O (3-2) emission lines, complemented by JWST images of H2 and aromatic infrared band (AIB) emission. The rim of the Bar shows very corrugated structures made of small-scale H2 dissociation fronts (DFs). The [CI] 609 um emission peaks very close (~0.002 pc) to the main H2-emitting DFs, suggesting the presence of gas density gradients. These DFs are also bright and remarkably similar in C2H emission, which traces 'hydrocarbon radical peaks' characterized by very high C2H abundances, reaching up to several x10^-7. The high abundance of C2H and of related hydrocarbon radicals, such as CH3, CH2, and CH, can be attributed to gas-phase reactions driven by elevated temperatures, the presence of C+ and C, and the reactivity of FUV-pumped H2. The hydrocarbon radical peaks roughly coincide with maxima of the 3.4/3.3 um AIB intensity ratio, a proxy for the aliphatic-to-aromatic content of PAHs. This implies that the conditions triggering the formation of simple hydrocarbons also favor the formation (and survival) of PAHs with aliphatic side groups, potentially via the contribution of bottom-up processes in which abundant hydrocarbon radicals react in situ with PAHs. Ahead of the DFs, in the atomic PDR zone (where [H]>>[H2]), the AIB emission is brightest, but small PAHs and carbonaceous grains undergo photo-processing due to the stronger FUV field. Our detection of trace amounts of C2H in this zone may result from the photoerosion of these species. This study provides a spatially resolved view of the chemical stratification of key carbon carriers in a PDR. Overall, both bottom-up and top-down processes appear to link simple hydrocarbon molecules with PAHs in molecular clouds; however, the exact chemical pathways and their relative contributions remain to be quantified.

  • 28 authors
·
Mar 5, 2025

Hidden orbital polarization in diamond, silicon, germanium, gallium arsenide and layered materials

It was previously believed that the Bloch electronic states of non-magnetic materials with inversion symmetry cannot have finite spin polarizations. However, since the seminal work by Zhang et al. [Nat. Phys. 10, 387-393 (2014)] on local spin polarizations of Bloch states in non-magnetic, centrosymmetric materials, the scope of spintronics has been significantly broadened. Here, we show, using a framework that is universally applicable independent of whether hidden spin polarizations are small (e.g., diamond, Si, Ge, and GaAs) or large (e.g., MoS2 and WSe2), that the corresponding quantity arising from orbital - instead of spin - degrees of freedom, the hidden orbital polarization, is (i) much more abundant in nature since it exists even without spin-orbit coupling and (ii) more fundamental since the interband matrix elements of the site-dependent orbital angular momentum operator determines the hidden spin polarization. We predict that the hidden spin polarization of transition metal dichalcogenides is reduced significantly upon compression. We suggest experimental signatures of hidden orbital polarization from photoemission spectroscopies and demonstrate that the current-induced hidden orbital polarization may play a far more important role than its spin counterpart in antiferromagnetic information technology by calculating the current-driven antiferromagnetism in compressed silicon.

  • 2 authors
·
Aug 21, 2016