Daily Papers

High-quality long-horizon training data for terminal agents is expensive to produce, often costing hundreds to thousands of dollars per task, because each task must keep the instruction, environment, reference solution, and verifier mutually consistent. Human authoring does not scale, and direct generation with large language models (LLMs) often breaks these dependencies. We present Recursive Synthetic Terminal Tasks (RST), a recursive verified synthesis framework for constructing long-horizon terminal-agent tasks at scale. Starting from verified seed tasks, RST extends the reference solution, realigns the verifier and instruction to the new workflow, validates the result in a fresh sandbox, and reuses accepted tasks as seeds for subsequent rounds. Across fifteen recursive rounds, RST produces 37,484 synthesized terminal-agent tasks at roughly $0.05 per task. Task difficulty increases substantially over rounds: the median reference solution grows from 67 to 374 lines, the median number of executed commands grows from 40 to 244, and DeepSeek-V4-Pro pass@4 drops from 90% at R1 to 2.5% at R15. To demonstrate training utility, we collect rejection-sampled Qwen3.5 trajectories on the synthesized tasks and use them for supervised fine-tuning. Fine-tuning on these trajectories improves Qwen3.5-27B and Qwen3.5-122B-A10B by up to 10 points on Terminal-Bench 2, Terminal-Bench Hard, and Long-Horizon Terminal Bench, while agentic PPO lifts Qwen3.5-27B to 49.44%, 32.00%, and 22.07% on the three benchmarks, corresponding to relative gains of 20.0%, 41.2%, and 21.9% over the base model. Moreover, after 15 rounds, the recursion shows no ceiling: synthesis yield and validation rates remain stable as difficulty keeps climbing, indicating that the process can continue well beyond the scale reported here.

Successful trajectories on difficult tasks provide valuable supervision for model improvement, but specialized harnesses introduce interventions that may be unavailable during deployment. We propose Recursive Self-Rewrite (RSR), a framework that uses one base model, Qwen-3.8-27B, to discover successful solutions under diverse harnesses and reconstruct them as training trajectories under a general harness. A planner extracts procedures into runbooks, a critic screens for verifier and solution leakage and guides recursive revision, and an executor follows qualified runbooks in fresh sandboxes. Across approximately 3K self-curated terminal tasks, three harnesses jointly solve 759 tasks, 34.3% more than the strongest individual harness in the recorded pool. RSR expands 2,001 successful source trajectories into 11,094 rewritten trajectories for supervised finetuning. Training on these trajectories outperforms both the base model and direct trajectory SFT. Compared with the base model, pass@3 increases from 57.0% to 74.2% on Terminal-Bench 2, from 1.5% to 9.1% on Terminal-Bench 4, from 39.0% to 63.0% on our self-curated Terminal-Bench Hard, and from 3.0% to 6.0% on our Software Terminal-Bench. Process reward on Long-Horizon Terminal-Bench rises from 0.21 to 0.29. These results show how diverse harness-assisted experiences can be reconstructed into reusable capabilities for a model operating under a general harness.

We present KAT-Coder-V2, an agentic coding model developed by the KwaiKAT team at Kuaishou. KAT-Coder-V2 adopts a "Specialize-then-Unify" paradigm that decomposes agentic coding into five expert domains - SWE, WebCoding, Terminal, WebSearch, and General - each undergoing independent supervised fine-tuning and reinforcement learning, before being consolidated into a single model via on-policy distillation. We develop KwaiEnv, a modular infrastructure sustaining tens of thousands of concurrent sandbox instances, and scale RL training along task complexity, intent alignment, and scaffold generalization. We further propose MCLA for stabilizing MoE RL training and Tree Training for eliminating redundant computation over tree-structured trajectories with up to 6.2x speedup. KAT-Coder-V2 achieves 79.6% on SWE-bench Verified (vs. Claude Opus 4.6 at 80.8%), 88.7 on PinchBench (surpassing GLM-5 and MiniMax M2.7), ranks first across all three frontend aesthetics scenarios, and maintains strong generalist scores on Terminal-Bench Hard (46.8) and tau^2-Bench (93.9). Our model is publicly available at https://streamlake.com/product/kat-coder.

AI agents may soon become capable of autonomously completing valuable, long-horizon tasks in diverse domains. Current benchmarks either do not measure real-world tasks, or are not sufficiently difficult to meaningfully measure frontier models. To this end, we present Terminal-Bench 2.0: a carefully curated hard benchmark composed of 89 tasks in computer terminal environments inspired by problems from real workflows. Each task features a unique environment, human-written solution, and comprehensive tests for verification. We show that frontier models and agents score less than 65\% on the benchmark and conduct an error analysis to identify areas for model and agent improvement. We publish the dataset and evaluation harness to assist developers and researchers in future work at https://www.tbench.ai/ .

Most reported gains from agent-optimization methods are one-shot: an agent is optimized against a fixed benchmark and the resulting improvement is reported as if it were a stable property of the method. This does not test the setting that matters for deployed agents, where optimization is applied recursively as new failures and new tasks appear over time. The central question this raises is whether optimizer-driven gains compound: after an agent has been optimized once, can it be optimized again on newly arrived tasks without eroding the gains the first round produced? We study this question with a two-phase continual-learning evaluation built from hard tasks in Terminal-Bench 2.0, comparing three approaches to agent-harness optimization (GEPA, Meta Harness, and RELAI's Verifiable Continual Learning, RELAI-VCL) under identical optimization budgets. All three methods improve over the baseline agent in the conventional, static, single-phase setting. However, once new tasks are introduced, the methods diverge sharply: GEPA's optimized agent transfers below the unoptimized baseline, Meta Harness transfers well but fails to improve further once given a second optimization budget, and RELAI-VCL is the only method that both transfers positively to unseen tasks and continues improving after those tasks are folded into the optimization objective, reaching the highest pass rate at every evaluated stage and the highest lifelong average pass rate overall (76.4% vs. 66.0% for GEPA, 64.6% for Meta Harness, and 58.7% for the baseline). Our key observation was that optimization gains compounded only when regression control was built into the optimization loop, providing an inductive bias against shortcut solutions that fail to generalize.

Coding agents increasingly run inside organizations whose security controls (scoped credentials, restricted egress, read-only filesystems, non-root execution) constrain them like any other software. Existing benchmarks, however, evaluate agents almost exclusively in permissive sandboxes, so it is unknown how performance changes when policy is enforced. In this work, we evaluate 12 coding agents on Terminal-Bench 2.1 across nested security policy levels derived from common real-world enterprise restrictions. Hardening is never free but far from uniform: under the strictest policy, success losses reach 18.3 points and cost inflation 167.3\%, and the two axes disagree; the model that best preserves success is also the one that loses the most efficiency, so model choice is policy-dependent. Beyond aggregate scores, we characterize how agents behave when policy blocks their actions and decompose the failures hardening induces: runs grind into timeouts or wrong solutions rather than stopping early, in a mix that differs by model. To ground comparisons, we verify task solvability under the strictest policy, separating model failures from tasks the policy forecloses. We release Boundary-Bench, an open-source hardening plugin enabling policy-constrained evaluation of coding agents on Terminal-Bench and compatible benchmarks.

Agent benchmarks score submissions with outcome verifiers that are typically hand-written and brittle, leaving them open to reward hacking. We audit 1,968 tasks across five terminal-agent benchmarks and find 323 (16%) hackable by frontier models given only the task description. This corrupts both leaderboard rankings and RL training signal, yet the standard response is manual and reactive. We introduce the hacker-fixer loop, a method for building exploit-resistant verifiers without per-task manual patching. The loop alternates three LLM agents: a hacker tries to pass the verifier without solving the task, a fixer patches the verifier to reject each discovered exploit, and a solver confirms the patched verifier still admits legitimate solutions. The loop iterates: each patch reshapes what the verifier rewards, surfacing the next exploit. We further add verifier access, and let patches transfer across tasks, to broaden the exploits the loop discovers. On KernelBench, the loop drives the attack success rate from 62% to 0% on a held-out corpus of publicly reported exploits. We also find that weaker agents in the loop can defend against much stronger hackers: Gemini 3 Flash's loop drives the stronger Gemini 3.1 Pro and Claude Opus 4.7's attack success rate from 76% and 61% to 0% on KernelBench, and Gemini 3.1 Pro's from 39% to 17% on Terminal Bench across 77 tasks. We release Terminal Wrench (323 hackable environments, 3,632 hack trajectories) as a snapshot of the current attack surface, our patched verifiers, the exploits the loop discovered, and our implementation as a basis for future work.

Agent usage is shifting toward long-horizon tasks such as coding and scientific discovery, among which terminal tasks are especially important. We introduce T1, a Mixture-of-Experts model of 122B total trained with reinforcement learning, operating a real shell in a cloud sandbox for up to 300+ tool-call turns per task, rewarded by executing each task's own verifier. We provide a comprehensive recipe: First, an aggressively warm-started to stabilize actor-critic training, with a dense process reward scoring trajectories by the absolute number of passing verifiers. Second, stable optimization through TITO construction, training on the exact sampled token identifiers with drift repair at turn boundaries, and rollout routing replay, recording the sampler's per-token expert choices at every MoE layer and replaying them during training. Third, fully out-of-distribution training corpus: isolated seeds and synthesized tasks disjoint from Terminal-Bench 2.1 ensures gains reflect genuine capability transfer over benchmark overfitting. Together, TITO and R3 cut the training-to-inference log-probability difference from 0.021 to 0.013, with exactly aligned zero token drift in the loss region. On Terminal-Bench 2.1, our post-train pipeline raises initial base model from 43.8% to T1 with 64.0% resolved. On Long-Horizon Terminal Bench, T1 reaches 27.9% and surpasses GPT-5.4 and GLM-5.1.

AI agents have become capable of autonomously completing short, well-specified tasks. However, existing terminal benchmarks largely focus on simple problems that finish within minutes and are evaluated only by their final outcome. This setup overlooks intermediate progress and partial solutions, yielding sparse reward signals and an incomplete picture of agent capability. We introduce Long-Horizon-Terminal-Bench, a terminal benchmark of 46 long-horizon tasks spanning nine categories, including experiment reproduction, software engineering, multimodal analysis, interactive games, and scientific computing. Each task follows a Terminal-Bench-style setup with a reference solution or simulation engine, but is further decomposed into fine-grained graded subtasks. This design enables dense intermediate rewards and partial credit, allowing evaluation to capture not only whether an agent reaches the final goal, but also how far it progresses on open-ended workflows. Tasks in Long-Horizon-Terminal-Bench typically require hundreds of episodes and minutes to hours of execution, stressing long-horizon planning, long-context management, and iterative debugging rather than one-shot problem solving. We evaluate 15 frontier models and find that agents consume on average 9.9M tokens per task, with roughly 231 episodes and 85.3 minutes of execution time per run, making Long-Horizon-Terminal-Bench more demanding than prior terminal-based benchmarks. Even the strongest tested model achieves 15.2% pass@1 at a partial-reward threshold of 0.95 and 10.9% at a perfect-reward threshold of 1.0, while the mean pass rate across models is 4.3% and 1.7% under the two thresholds, respectively. These results reveal headroom for improvement. We further analyze failure modes and error patterns, and release Long-Horizon-Terminal-Bench to support future progress on long-horizon terminal agents.

Training agentic models for terminal-based tasks critically depends on high-quality terminal trajectories that capture realistic long-horizon interactions across diverse domains. However, constructing such data at scale remains challenging due to two key requirements: \emph{Executability}, since each instance requires a suitable and often distinct Docker environment; and \emph{Verifiability}, because heterogeneous task outputs preclude unified, standardized verification. To address these challenges, we propose TerminalTraj, a scalable pipeline that (i) filters high-quality repositories to construct Dockerized execution environments, (ii) generates Docker-aligned task instances, and (iii) synthesizes agent trajectories with executable validation code. Using TerminalTraj, we curate 32K Docker images and generate 50,733 verified terminal trajectories across eight domains. Models trained on this data with the Qwen2.5-Coder backbone achieve consistent performance improvements on TerminalBench (TB), with gains of up to 20\% on TB~1.0 and 10\% on TB~2.0 over their respective backbones. Notably, TerminalTraj-32B achieves strong performance among models with fewer than 100B parameters, reaching 35.30\% on TB~1.0 and 22.00\% on TB~2.0, and demonstrates improved test-time scaling behavior. All code and data are available at https://github.com/Wusiwei0410/TerminalTraj.

Environments are the bottleneck for self-improving agents. Current terminal benchmarks were built for evaluation, not training; reinforcement learning requires a scalable pipeline, not just a dataset. We introduce Endless Terminals, a fully autonomous pipeline that procedurally generates terminal-use tasks without human annotation. The pipeline has four stages: generating diverse task descriptions, building and validating containerized environments, producing completion tests, and filtering for solvability. From this pipeline we obtain 3255 tasks spanning file operations, log management, data processing, scripting, and database operations. We train agents using vanilla PPO with binary episode level rewards and a minimal interaction loop: no retrieval, multi-agent coordination, or specialized tools. Despite this simplicity, models trained on Endless Terminals show substantial gains: on our held-out dev set, Llama-3.2-3B improves from 4.0% to 18.2%, Qwen2.5-7B from 10.7% to 53.3%, and Qwen3-8B-openthinker-sft from 42.6% to 59.0%. These improvements transfer to human-curated benchmarks: models trained on Endless Terminals show substantial gains on held out human curated benchmarks: on TerminalBench 2.0, Llama-3.2-3B improves from 0.0% to 2.2%, Qwen2.5-7B from 2.2% to 3.4%, and Qwen3-8B-openthinker-sft from 1.1% to 6.7%, in each case outperforming alternative approaches including models with more complex agentic scaffolds. These results demonstrate that simple RL succeeds when environments scale.

Terminal-using agents have quickly become the most popular downstream application of language models (LMs). Despite their prevalence, relatively little academic work has examined RL-based training of these models, likely due to difficult benchmarks, a lack of data, and a lack of simple baseline recipes. We present Tmax, the strongest open RL recipe for terminal agents to date, bringing open data recipes closer to the frontier. While simple, our recipe achieves 27\% on Terminal-Bench 2.0 with only 9B parameters, outperforming much larger models from prior work. Concretely, we generate data using a novel taxonomy, combining difficulty control, personas, and verifier diversification, which allows us to cheaply generate large amounts of terminal environments for RL and SFT training. We open-source our terminal dataset, which is over 2.5x larger than previously released terminal-agent datasets. We then train open-weight models using RL with our data, using a simple, outcome-only recipe. We release our data, models, and code as a strong baseline for future open academic work on terminal agents at https://github.com/hamishivi/tmax.

In long-horizon tasks, decision-relevant state is often scattered across an expanding trajectory, while the action agent must surface it and act. As trajectories grow, task requirements, environment facts, prior attempts, diagnoses, and open subgoals can be buried in the context window or pushed beyond it, failing to influence decisions when needed. We call this failure mode "behavioral state decay". We study memory as an active intervention mechanism rather than passive retrieval. A separate memory agent runs alongside an unmodified action agent, updating a structured memory bank from the recent trajectory and deciding whether to inject a memory-grounded reminder or remain silent. The module is plug-and-play with frontier action agents and existing agent harnesses. Across Terminal-Bench 2.0 and τ^2-Bench, it improves pass@1 for both weaker and stronger action agents, with gains of +8.3 pp on Terminal-Bench and +6.8 pp on τ^2-Bench. Ablations show that selective intervention outperforms passive bank exposure, always-on injection, advisor-only guidance, and general retrieval. As an early step toward open-weight memory policies, we train Qwen3.5-27B on SETA using SFT and GRPO, improving validation reward and achieving partial transfer to Terminal-Bench.

Training terminal agents requires executable and verifiable tasks that are not merely solvable, but appropriately challenging for learning. Executable validation establishes feasibility, yet does not reveal how a task behaves relative to a given solver setting. In this paper, we present CalibForge, an autonomous terminal-task synthesis system that uses verified solver behavior to revise candidate tasks through adversarial solver calibration. Multi-solver calibration targets disagreement within a heterogeneous solver pool, whereas contrastive solver calibration targets a designated strong-pass/weak-fail relation; both operationalize a solver-relative learnable zone anchored in demonstrated solvability. Using CalibForge, we construct 5,431 calibrated terminal tasks. Our ablations show that both strategies yield more effective supervision than authoring and validation alone or ordinary single-solver feedback. Models trained on the full collection achieve 32.58% and 47.57% on Terminal-Bench 2.0. The largest improvements over the corresponding base model reach 24.71 percentage points on Terminal-Bench 2.0, 27.68 points on SWE-bench Pro, and 30.04 points on Doc2Repo. Together, these results support solver-relative learnability as a practical target for constructing effective and transferable agent training data.

Terminal agents are increasingly capable of executing complex, long-horizon tasks autonomously from a single user prompt. To do so, they must interpret instructions encountered in the environment (e.g., README files, code comments, stack traces) and determine their relevance to the task. This creates a fundamental challenge: relevant cues must be followed to complete a task, whereas irrelevant or misleading ones must be ignored. Existing benchmarks do not capture this ability. An agent may appear capable by blindly following all instructions, or appear robust by ignoring them altogether. We introduce TAB (Task Alignment Benchmark), a suite of 89 terminal tasks derived from Terminal-Bench 2.1. Each task is intentionally underspecified, with missing information provided as a necessary cue embedded in a natural environmental artifact, alongside a plausible but irrelevant distractor. Solving these tasks requires selectively using the cue while ignoring the distractor. Applying TAB to ten frontier agents reveals a systematic gap between task capability and task alignment. The strongest Terminal-Bench agent achieves high task completion but low task alignment on TAB. Evaluating six prompt-injection defenses further shows that suppressing distractor execution also suppresses the cues required for task completion. These results demonstrate that task-aligned agents require selective use of environmental instructions rather than blanket acceptance or rejection.