Daily Papers

Modern video diffusion models achieve higher generation quality through scaling, but this also increases inference cost. Although many acceleration methods have been proposed, a central challenge is that the most effective acceleration strategy is highly instance-specific: a recipe that works well for one combination of model, hardware, and inference configuration often does not transfer to another. Different models vary in architecture, numerical sensitivity, and attention concentration patterns. Inference settings differ in spatial and temporal resolution and video duration, while hardware platforms differ in memory hierarchy, supported numerical formats, and kernel throughput. These factors create a large tuning space, making manual performance engineering costly. We present Sol Video Inference Engine, an agentic, native, training-free acceleration framework for video diffusion models. It organizes five broadly applicable techniques, cache, sparse attention, token pruning, quantization, and kernel fusion, into an agentic acceleration stack for instance-specific optimization. For a concrete deployment target defined by a model, hardware platform, and serving configuration, parallel skill agents optimize the implementation of each technique, an agent integrator composes them into a global acceleration stack, and a human validator provides feedback on generation quality. We instantiate this workflow on three video models with different sizes and architectures: 64B Cosmos3-Super, 22B LTX-2.3, and 2B SANA-Video. With little human effort, the full stack achieves more than 2x end-to-end acceleration while maintaining near-lossless VBench quality, demonstrating the effectiveness of the agent framework for video diffusion acceleration.

High-resolution video generation is expensive, as its cost grows rapidly with the number of spatiotemporal tokens. A practical alternative first generates a lower-resolution video and then applies a refiner, but conventional multi-step refinement introduces a second sampling bottleneck. We present SoL-Refiner, a one-step video refiner that transforms low-resolution model outputs into 4K videos with a single denoising step. Our three-stage recipe combines high-resolution continual training, reinforcement learning (RL) post-training, and a final one-step distillation. We introduce Refiner-Bench, a video refinement benchmark constructed from the outputs of different video generators, and use a shared-input protocol to compare refiners at approximately 2K output resolution. At 2K, the one-step SoL-Refiner outperforms all external refiners on the VBench and UniPercept averages, while at 3840!times!2176 it improves both metrics over the three-step LTX-2.3 Refiner. With the complete acceleration stack, SoL-Refiner achieves an 8.91times speedup in refinement latency over the same baseline in our 2K latency setting.

Deploying massive diffusion models for real-time, infinite-duration, audio-driven avatar generation presents a significant engineering challenge, primarily due to the conflict between computational load and strict latency constraints. Existing approaches often compromise visual fidelity by enforcing strictly unidirectional attention mechanisms or reducing model capacity. To address this problem, we introduce SoulX-FlashTalk, a 14B-parameter framework optimized for high-fidelity real-time streaming. Diverging from conventional unidirectional paradigms, we use a Self-correcting Bidirectional Distillation strategy that retains bidirectional attention within video chunks. This design preserves critical spatiotemporal correlations, significantly enhancing motion coherence and visual detail. To ensure stability during infinite generation, we incorporate a Multi-step Retrospective Self-Correction Mechanism, enabling the model to autonomously recover from accumulated errors and preventing collapse. Furthermore, we engineered a full-stack inference acceleration suite incorporating hybrid sequence parallelism, Parallel VAE, and kernel-level optimizations. Extensive evaluations confirm that SoulX-FlashTalk is the first 14B-scale system to achieve a sub-second start-up latency (0.87s) while reaching a real-time throughput of 32 FPS, setting a new standard for high-fidelity interactive digital human synthesis.

Video diffusion models are rapidly scaling and exhibiting enhanced generation capabilities. Among these recent advancements, MiniMax-H3 stands out as a highly capable, production-level open-source model. However, its 33-billion parameters and multi-step iterative denoising process introduce substantial computational overhead. Consequently, their practical production is hindered by generation latency in the cloud deployment like NVIDIA-GB200, alongside strict memory limits that pose further challenges at the edge device like DGX-Spark. To address these diverse hardware bottlenecks from cloud to edge device, we present a full-stack inference pipeline that integrates efficient algorithmic design with optimized operator implementations. Algorithmically, we introduce a cross-resolution two-stage generation scheduler that exploits the step-wise nature of diffusion: early low-resolution steps rapidly establish the global layout, while later high-resolution steps focus refinements of local and perceptual details. These stages are connected by a learned latent-to-latent mapping module, completely eliminating the computationally expensive VAE decode-reencode cycle for resolution transferring cross different resolutions. For operator implementation, we deploy a Recursive Self-Improvement (RSI) loop that searches kernel fusions and memory layouts, evaluating latency together with numerical agreement. Together, these optimizations deliver up to 30x end-to-end speedup and 20% lower memory: a 5-second 1344x768 video with audio is generated 3.5x faster than real time on an 8xGB200 node, and in under a minute fully memory-resident on a single DGX Spark.

LLMs are computationally expensive to pre-train due to their large scale. Model growth emerges as a promising approach by leveraging smaller models to accelerate the training of larger ones. However, the viability of these model growth methods in efficient LLM pre-training remains underexplored. This work identifies three critical textit{O}bstacles: (O1) lack of comprehensive evaluation, (O2) untested viability for scaling, and (O3) lack of empirical guidelines. To tackle O1, we summarize existing approaches into four atomic growth operators and systematically evaluate them in a standardized LLM pre-training setting. Our findings reveal that a depthwise stacking operator, called G_{stack}, exhibits remarkable acceleration in training, leading to decreased loss and improved overall performance on eight standard NLP benchmarks compared to strong baselines. Motivated by these promising results, we conduct extensive experiments to delve deeper into G_{stack} to address O2 and O3. For O2 (untested scalability), our study shows that G_{stack} is scalable and consistently performs well, with experiments up to 7B LLMs after growth and pre-training LLMs with 750B tokens. For example, compared to a conventionally trained 7B model using 300B tokens, our G_{stack} model converges to the same loss with 194B tokens, resulting in a 54.6\% speedup. We further address O3 (lack of empirical guidelines) by formalizing guidelines to determine growth timing and growth factor for G_{stack}, making it practical in general LLM pre-training. We also provide in-depth discussions and comprehensive ablation studies of G_{stack}. Our code and pre-trained model are available at https://llm-stacking.github.io/{https://llm-stacking.github.io/}.

As large language model (LLM) inference demands ever-greater resources, there is a rapid growing trend of using low-bit weights to shrink memory usage and boost inference efficiency. However, these low-bit LLMs introduce the need for mixed-precision matrix multiplication (mpGEMM), which is a crucial yet under-explored operation that involves multiplying lower-precision weights with higher-precision activations. Unfortunately, current hardware does not natively support mpGEMM, resulting in indirect and inefficient dequantization-based implementations. To address the mpGEMM requirements in low-bit LLMs, we explored the lookup table (LUT)-based approach for mpGEMM. However, a conventional LUT implementation falls short of its potential. To fully harness the power of LUT-based mpGEMM, we introduce LUT Tensor Core, a software-hardware co-design optimized for low-bit LLM inference. Specifically, we introduce software-based operator fusion and table symmetrization techniques to optimize table precompute and table storage, respectively. Then, LUT Tensor Core proposes the hardware design featuring an elongated tiling shape design to enhance table reuse and a bit-serial design to support various precision combinations in mpGEMM. Moreover, we design an end-to-end compilation stack with new instructions for LUT-based mpGEMM, enabling efficient LLM compilation and optimizations. The evaluation on low-bit LLMs (e.g., BitNet, LLAMA) shows that LUT Tensor Core achieves more than a magnitude of improvements on both compute density and energy efficiency.

Gamma-ray bursts (GRBs) are widely suggested as potential sources of ultrahigh-energy cosmic rays (UHECRs). The kinetic energy of the jets dissipates, leading to the production of an enormous amount of gamma-ray photons and possibly also the acceleration of protons. The accelerated protons will interact with the radiation of the GRB via the photomeson and Bethe-Heitler processes, which can initiate electromagnetic cascades. This process can give rise to broadband radiation up to the GeV-TeV gamma-ray regime. The expected gamma-ray flux from cascades depends on properties of the GRB jet, such as the dissipation radius R_{rm diss}, the bulk Lorentz factor Gamma, and the baryon loading factor eta_p. Therefore, observations of Fermi-LAT can impose constraints on these important parameters. In this study, we select 12 GRBs of high keV-MeV fluence and constrain the baryon loading factor, under different combinations of the bulk Lorentz factor and the dissipation radius based on Fermi-LAT's measurements. Our findings indicate a strong constraint of eta_p<10 for most selected GRBs over a large parameter space except for large dissipation radii (gtrsim 10^{15}rm cm) and high bulk Lorentz factors (gtrsim 600). The constraint is comparable to, and in some GRBs even stronger than, that from high-energy neutrinos for stacked GRBs. Our results suggest that for typical bulk Lorentz factor of several hundreds, the dissipation radii of GRBs need be large to avoid overshooting the GeV gamma-ray flux during the prompt emission phase of GRBs, which can be used to constrain GRBs.

Diffusion Transformers (DiTs) have become a de facto backbone of modern visual generation, and nearly every major axis of their design -- tokenization, attention, conditioning, objectives, and latent autoencoders -- has been extensively revisited. The residual stream that governs how information accumulates across layers, however, has been directly inherited from the original Transformer. In this paper, we present a systematic empirical analysis of cross-layer information flow in DiTs, jointly along depth and denoising timestep, and identify three concrete symptoms of traditional residual addition, namely monotonic forward magnitude inflation, sharp backward gradient decay, and pronounced block-wise redundancy. Motivated by this diagnosis, we propose Diffusion-Adaptive Routing (DAR), a drop-in residual replacement that performs learnable, timestep-adaptive, and non-incremental aggregation over the history of sublayer outputs. Moreover, the proposed DAR is compatible with many modern Transformer enhancement methods, such as REPA. On ImageNet 256times256, DAR improves SiT-XL/2 by 2.11 FID (7.56 vs.\ 9.67) and matches the baseline's converged quality with 8.75times fewer training iterations. Stacked on top of REPA, it yields a 2times training acceleration in the early stage, suggesting cross-layer information routing as an underexplored design axis in diffusion modeling, one that operates orthogonally to existing representation-alignment objectives. Beyond pretraining, DAR can also be applied during the fine-tuning stage of large-scale T2I models and preserves high-frequency details during Distribution Matching Distillation.

The transformer extends its success from the language to the vision domain. Because of the stacked self-attention and cross-attention blocks, the acceleration deployment of vision transformer on GPU hardware is challenging and also rarely studied. This paper thoroughly designs a compression scheme to maximally utilize the GPU-friendly 2:4 fine-grained structured sparsity and quantization. Specially, an original large model with dense weight parameters is first pruned into a sparse one by 2:4 structured pruning, which considers the GPU's acceleration of 2:4 structured sparse pattern with FP16 data type, then the floating-point sparse model is further quantized into a fixed-point one by sparse-distillation-aware quantization aware training, which considers GPU can provide an extra speedup of 2:4 sparse calculation with integer tensors. A mixed-strategy knowledge distillation is used during the pruning and quantization process. The proposed compression scheme is flexible to support supervised and unsupervised learning styles. Experiment results show GPUSQ-ViT scheme achieves state-of-the-art compression by reducing vision transformer models 6.4-12.7 times on model size and 30.3-62 times on FLOPs with negligible accuracy degradation on ImageNet classification, COCO detection and ADE20K segmentation benchmarking tasks. Moreover, GPUSQ-ViT can boost actual deployment performance by 1.39-1.79 times and 3.22-3.43 times of latency and throughput on A100 GPU, and 1.57-1.69 times and 2.11-2.51 times improvement of latency and throughput on AGX Orin.

Most automated driving functions are designed for a specific task or vehicle. Most often, the underlying architecture is fixed to specific algorithms to increase performance. Therefore, it is not possible to deploy new modules and algorithms easily. In this paper, we present our automated driving stack which combines both scalability and adaptability. Due to the modular design, our stack allows for a fast integration and testing of novel and state-of-the-art research approaches. Furthermore, it is flexible to be used for our different testing vehicles, including modified EasyMile EZ10 shuttles and different passenger cars. These vehicles differ in multiple ways, e.g. sensor setups, control systems, maximum speed, or steering angle limitations. Finally, our stack is deployed in real world environments, including passenger transport in urban areas. Our stack includes all components needed for operating an autonomous vehicle, including localization, perception, planning, controller, and additional safety modules. Our stack is developed, tested, and evaluated in real world traffic in multiple test sites, including the Test Area Autonomous Driving Baden-W\"urttemberg.

Modern cutting-edge AI applications are being developed over fast-evolving, heterogeneous, nascent hardware devices. This requires frequent reworking of the AI software stack to adopt bottom-up changes from new hardware, which takes time for general-purpose software libraries. Consequently, real applications often develop custom software stacks optimized for their specific workloads and hardware. Custom stacks help in quick development and optimization, but incur a lot of redundant efforts across applications in writing non-portable code. This paper discusses an alternative communication library interface for AI applications that offers both portability and performance by reducing redundant efforts while maintaining flexibility for customization. We present MSCCL++, a novel abstraction of GPU communication based on separation of concerns: (1) a primitive interface provides a minimal hardware abstraction as a common ground for software and hardware developers to write custom communication, and (2) higher-level portable interfaces and specialized implementations enable optimization for different workloads and hardware environments. This approach makes the primitive interface reusable across applications while enabling highly flexible optimization. Compared to state-of-the-art baselines (NCCL, RCCL, and MSCCL), MSCCL++ achieves speedups of up to 5.4times for collective communication and up to 15% for real-world AI inference workloads. MSCCL++ is in production of multiple AI services provided by Microsoft Azure, and is also adopted by RCCL, the GPU collective communication library maintained by AMD. MSCCL++ is open-source and available at https://github.com/microsoft/mscclpp.

We introduce and open-source the Unified Autonomy Stack, a system-level solution that enables resilient autonomy across diverse aerial and ground robot morphologies. The architecture centers on three synergistic modules -- multi-modal perception, multi-behavior planning, and multi-layered safe navigation -- that together deliver comprehensive mission autonomy. The stack fuses data from LiDAR, radar, vision, and inertial sensing, enabling (a) robust localization and mapping through factor graph-based fusion, (b) semantic scene understanding, (c) motion and informative path planning through sampling-based techniques adaptive across spatial scales, as well as (d) multi-layered safe navigation both through planning on the online reconstructed map and deep learning-driven exteroceptive policies alongside last-resort safety filters using control barrier functions. The resulting behaviors include safe GNSS-denied navigation into unknown and perceptually-degraded regions, exploration of complex environments, object discovery, and efficient inspection planning. The stack has been field-tested and validated on both aerial (rotorcraft) and ground (legged) robots operating in a host of demanding environments, including self-similar and smoke-filled settings, with complex geometries and high obstacle clutter. These tests demonstrate resilient performance in challenging conditions. To facilitate ease of adoption, we open-source the implementation alongside supporting documentation, validation, and evaluation datasets https://github.com/ntnu-arl/unified_autonomy_stack. A video giving the overview of the paper and the field experiments is available at https://youtu.be/l8Su8OXsM-E.

Agentic systems use large language models (LLMs) to carry out concrete tasks. Prior work often borrows abstractions such as scheduling, caching or isolation piecemeal from operating systems, so the mechanisms it builds share little common ground, and the shared view of the two forms of agentic system, Workflows and Agents, is limited. We construct an abstract machine that provides both. We treat the LLM as an Oracle and extend a two-stack pushdown automaton with one instruction, which hands the Oracle a whole stack as its query and appends the answer to that same stack. The machine thus performs two computations, the Oracle's and a Turing-complete one that we call the Priestess. A stack that the program only appends to grows autoregressively, as an agent's context does. Two symmetry breakings, S in storage and T in transitions, make a Priestess program the operating system of the programs the Oracle runs, and produce the Agent and the Workflow as the two placements of a task's program. For internally autoregressive Oracles, the two computations synchronize at the end of every answer under certain conditions, and through that synchronization we model caching and analyse scheduling. No guarantee that holds for every Oracle can fix which content crosses between the two computations, but such a guarantee does fix the boundary itself. The construction V fits the machine to a von Neumann computer. To show that it is realizable, we propose ArchNights, an extended RISC-V ISA and a Linux-style operating system implementing the machine by design. ArchNights-SE runs on gem5 as a computer system, becomes an agentic system when it runs an LLM as the Oracle, and will be open source. Agentic systems can then be designed as computer systems are. With a foundation built and a unified view, future work can share invariants and bounds, each with its conditions.

Personal AI stacks, like OpenClaw and Hermes Agent, are becoming central to daily work, yet they route nearly every query (often over sensitive local data) to cloud-hosted frontier models. Replacing frontier models with local models inside existing stacks does not work: swapping Claude Opus 4.6 for Qwen3.5-9B drops accuracy by 25-39 pp across personal AI tasks like PinchBench and GAIA. Existing stacks bundle agentic prompts, tool descriptions, memory configuration, and runtime settings around a specific cloud model. Only the prompts can be tuned, and state-of-the-art prompt optimizers close just 5 pp of the local-cloud gap on their own. This motivates a decomposed personal AI stack: one that exposes individual primitives which can be optimized individually or jointly to close the local-cloud gap. We present OpenJarvis, an architecture that represents a personal AI system as a typed spec over five primitives: Intelligence, Engine, Agents, Tools & Memory, and Learning. Each primitive is an independently editable field, making the stack end-to-end optimizable and measurable against accuracy, cost, and latency. Towards closing the local-cloud gap without surrendering local-model properties, OpenJarvis introduces LLM-guided spec search, a local-cloud collaboration in which frontier cloud models propose edits across the spec at search time, only non-regressing edits are accepted, and the resulting spec runs entirely on-device at inference time. With LLM-guided spec search, on-device specs match or exceed cloud accuracy on 4 of 8 benchmarks and land within 3.2 pp of the best cloud baseline on average. They also reduce marginal API cost by ~800x and end-to-end latency by 4x.

Turbulent magnetic fields are to some extent a universal feature in astrophysical phenomena. Charged particles that encounter these turbulence get on average accelerated according to the so-called second-order Fermi process. However, in most astrophysical environments there are additional competing processes, such as different kinds of first-order energy changes and particle escape, that effect the resulting momentum distribution of the particles. In this work we provide to our knowledge the first semi-analytical solution of the isotropic steady-state momentum diffusion equation including continuous and catastrophic momentum changes that can be applied to any arbitrary astrophysical system of interest. Here, we adopt that the assigned magnetic turbulence is constrained on a finite range and the particle flux vanishes beyond these boundaries. Consequently, we show that the so-called pile-up bump -- that has for some special cases long been established -- is a universal feature of stochastic acceleration that emerges around the momentum chi_{rm eq} where acceleration and continuous loss are in equilibrium if the particle's residence time in the system is sufficient at chi_{rm eq}. In general, the impact of continuous and catastrophic momentum changes plays a crucial role in the shape of the steady-state momentum distribution of the accelerated particles, where simplified unbroken power-law approximations are often not adequate.

We introduce VZCrash, the largest publicly available dataset of real-world vehicle collision data featuring Inertial Measurement Unit (IMU) telemetry. The dataset contains more than 31,000 validated crashes and 158,000 negative samples, including hard cases and distractors. Each sample includes acceleration and angular velocity at 100 Hz, and GPS speed at 1 Hz. Events in VZCrash were captured by devices installed on a fleet of 73,010 commercial vehicles of different sizes driving in the United States over the span of several years. We also present an extensive experimental study enabled by the volume of the dataset. We first benchmark several different approaches, from a simple threshold-based heuristic to state-of-the-art deep learning models. Then, we present an experiment demonstrating the importance of scaling data to train high-quality crash detection models, and we show that scale is especially important when these models need to be deployed into a real-world environment.

Training multi-billion to trillion-parameter language models efficiently on GPU clusters requires leveraging multiple parallelism strategies. We present Galvatron, a novel open-source framework (dubbed 'Optimus-Megatron' in the implementation) that dynamically combines data parallelism, tensor model parallelism, and pipeline parallelism to optimize training throughput. Built atop PyTorch and integrating NVIDIA's Megatron-LM and Microsoft's DeepSpeed, Galvatron automatically selects and adjusts parallelism strategies in real time based on model architecture, hardware, and training dynamics. This paper details Galvatron's key features -- automatic hybrid parallelism selection, layer-wise and phase-wise strategy optimization, and runtime adaptation -- and contrasts them with existing static frameworks. We describe the system's technical stack, including its use of DeepSpeed's ZeRO and NCCL communication, and provide an in-depth implementation overview of its core modules (profilers, strategy selector, parallelism manager). We then illustrate how Galvatron can be seamlessly integrated into existing training pipelines with minimal code modifications, providing companies a plug-and-play solution for efficient large-model training. Finally, we situate Galvatron in context with related efforts (NVIDIA Megatron-LM, Microsoft DeepSpeed, Google GShard, Meta FairScale, etc.), highlighting how it advances the state of the art in distributed deep learning. References to the GitHub repository and relevant literature are provided throughout.

In deployment of the VLA models to real-world robotic tasks, execution speed matters. In previous work arXiv:2510.26742 we analyze how to make neural computation of VLAs on GPU fast. However, we leave the question of how to actually deploy the VLA system on the real robots open. In this report we describe a set of practical techniques to achieve the end-to-end result of running a VLA-driven robot at an impressive speed in real world tasks that require both accuracy and dexterity. The stack of technology ranges across calibration, planning & control, and learning based method to identify optimal execution speed. In the tasks we show, the robot even executes in a speed on par with casual human operation and approaching the hardware limit of our lightweight arm. The unaccelerated videos and inference traces are provided in https://dexmal.github.io/realtime-vla-v2/.

Owing to the huge success of generative artificial intelligence (AI), large language models (LLMs) have emerged as a core subclass, underpinning applications such as question answering, text generation, and code completion. While fine-tuning these models on domain-specific data can yield significant performance gains, it also poses daunting computational challenges, especially for researchers and small organizations with limited hardware resources. Although SSD offloading (i.e., ZeRO-Infinity) has emerged as a viable strategy to overcome the GPU memory barrier via leveraging both system memory (i.e., CPU DRAM) and storage space (i.e., solid-state devices, SSDs), its design primarily targets model-centric performance issues. As a result, key system-level issues, including system memory fragmentation, inefficient pinned buffer allocation, peak CPU usage spikes, and file system overhead, remain unaddressed, stifling scalability and inflating costs. Such an observation motivates this paper to introduce MemAscend, a framework that systematically tackles the underexplored system memory bottlenecks in SSD-offloaded LLM training, with a focus on resource-constrained environments. By streamlining pinned-memory allocation, eradicating fragmentation, and mitigating peak overhead, MemAscend reclaims a substantial system memory budget, enabling larger models, longer context windows, and higher batch sizes without exceeding modest hardware limits. Across diverse LLM benchmarks, MemAscend reduces peak system-memory consumption by an average of 55.7% compared with standard SSD offloading techniques, lowering the hardware barrier for fine-tuning and unlocking new possibilities for cost-effective large-scale training on limited-resource machines.

Ever since the original algorithm by Nesterov (1983), the true nature of the acceleration phenomenon has remained elusive, with various interpretations of why the method is actually faster. The diagnosis of the algorithm through the lens of Ordinary Differential Equations (ODEs) and the corresponding dynamical system formulation to explain the underlying dynamics has a rich history. In the literature, the ODEs that explain algorithms are typically derived by considering the limiting case of the algorithm maps themselves, that is, an ODE formulation follows the development of an algorithm. This obfuscates the underlying higher order principles and thus provides little evidence of the working of the algorithm. Such has been the case with Nesterov algorithm and the various analogies used to describe the acceleration phenomena, viz, momentum associated with the rolling of a Heavy-Ball down a slope, Hessian damping etc. The main focus of our work is to ideate the genesis of the Nesterov algorithm from the viewpoint of dynamical systems leading to demystifying the mathematical rigour behind the algorithm. Instead of reverse engineering ODEs from discrete algorithms, this work explores tools from the recently developed control paradigm titled Passivity and Immersion approach and the Geometric Singular Perturbation theory which are applied to arrive at the formulation of a dynamical system that explains and models the acceleration phenomena. This perspective helps to gain insights into the various terms present and the sequence of steps used in Nesterovs accelerated algorithm for the smooth strongly convex and the convex case. The framework can also be extended to derive the acceleration achieved using the triple momentum method and provides justifications for the non-convergence to the optimal solution in the Heavy-Ball method.

Real-time interaction models -- Moshi, MiniCPM-o, Qwen-Omni -- turn serving into a periodic real-time task: on every frame a session ingests streaming audio and must respond by a recurring wall-clock deadline, while its KV cache grows monotonically and stays pinned for the whole conversation. This regime hides a dangerous failure mode. On a real full-duplex stack, sustained load does not degrade serving gracefully: it falls off a cliff, jumping in one step from milliseconds per frame to a stalled engine when accumulated session state exhausts the KV pool. The collapse is metastable -- identical five-minute runs collapse or survive on run-to-run variance -- and silent: latency and deadline-miss metrics read healthy throughout. We show one move restores both stability and observability: bound each session's resident state, and latency starts telling the truth. Metronome's in-engine KV window eliminates the collapse (0/20 vs. 14/20 runs across two batches) and turns per-frame latency into a monotone load signal, on which an online admission controller discovers the schedulable concurrency; without the window, the identical controller over-admits into the wall. A first-order model predicts the collapse time within a few percent on the headline model, and a quality probe validates the bound's design by ablation: the window alone is quality-free in turn-based decoding, and its few pinned attention-sink tokens are what keep free-running generation healthy. Everything is measured end-to-end on real audio, across four interaction models on one GPU.

To unleash the full potential of AI for Science, we must untether the agents from a purely digital environment. The agent's ability to control and explore in real-world labs is essential because the physical lab remains foundational to scientific discovery. While some tasks can be performed on a computer (e.g., data analysis, running simulated experiments), Eureka moments could occur at any time while operating lab instruments (e.g., when a scientist notices unexpected clues, intuition may prompt a real-time course change). Although autonomous labs are on the rise, which expose programmable APIs to control scientific instruments via software, bridging the gap between increasingly powerful AI agents and automated lab equipment requires innovation that draws insights from computer systems. We propose a new paradigm called ``Experiment-as-Code (EaC) Labs,'' where a core concept is to encode experiments as declarative configurations that can be compiled down to device-level APIs. AI agents come up with hypotheses and experiments, written as an ensemble of declarative configurations. The systems layer performs program analysis, safety checks, resource assignment, and job orchestration. Finally, programmatic experimentation occurs via actuating the device APIs. This is a general stack that is science-, lab-, and instrument-independent, representing a novel synthesis across the physical, systems, and intelligence layers to unleash the next breakthrough in AI for Science.

Unmanned aerial vehicles are rapidly transforming multiple applications, from agricultural and infrastructure monitoring to logistics and defense. Introducing greater autonomy to these systems can simultaneously make them more effective as well as reliable. Thus, the ability to rapidly engineer and deploy autonomous aerial systems has become of strategic importance. In the 2010s, a combination of high-performance compute, data, and open-source software led to the current deep learning and AI boom, unlocking decades of prior theoretical work. Robotics is on the cusp of a similar transformation. However, physical AI faces unique hurdles, often combined under the umbrella term "simulation-to-reality gap". These span from modeling shortcomings to the complexity of vertically integrating the highly heterogeneous hardware and software systems typically found in field robots. To address the latter, we introduce aerial-autonomy-stack, an open-source, end-to-end framework designed to streamline the pipeline from (GPU-accelerated) perception to (flight controller-based) action. Our stack allows the development of aerial autonomy using ROS2 and provides a common interface for two of the most popular autopilots: PX4 and ArduPilot. We show that it supports over 20x faster-than-real-time, end-to-end simulation of a complete development and deployment stack -- including edge compute and networking -- significantly compressing the build-test-release cycle of perception-based autonomy.

While vision-language-action (VLA) models have advanced rapidly, running them at every control step remains expensive. Prior work accelerates VLA inference using techniques like action chunking and visual-token pruning, typically evaluating based on latency and average task success. However, acceleration may discard information and break tasks the original policy would solve, a risk hidden by average metrics. Measuring these failures is challenging because action deviations compound over closed-loop trajectories, meaning task failure is only observable across full episodes. We therefore define an acceleration-induced failure via paired rollouts from identical initial conditions, tracking when the reference succeeds but the accelerated policy fails. To manage this, we introduce CARE, an approach for certified accelerator selection. CARE uses paired rollouts on a calibration set to provide finite-sample guarantees that acceleration-induced failure risk stays below a user-specified budget. It deploys the fastest certified candidate, falling back to the reference if none qualify. By relying only on terminal outcomes and measured compute, CARE applies unchanged across diverse acceleration mechanisms, while sequential testing and failure-triggered reference rollouts keep certification affordable. On four LIBERO suites with OpenVLA-OFT, CARE certifies 9.0--10.8times speedups while guaranteeing (at 95% confidence) that at least 85.8% of reference-solved episodes are preserved. Under tight budgets, selectors without guarantees exceed the budget in up to 75% of trials, whereas CARE stays within budget and its sequential form uses 78.9% fewer rollouts than exhaustive evaluation. CARE further generalizes to flow-step reduction for π_{0.5}, and to Qwen3.5-9B and Llama-3.1-8B agents in Crafter.

Isambard-AI is a new, leadership-class supercomputer, designed to support AI-related research. Based on the HPE Cray EX4000 system, and housed in a new, energy efficient Modular Data Centre in Bristol, UK, Isambard-AI employs 5,448 NVIDIA Grace-Hopper GPUs to deliver over 21 ExaFLOP/s of 8-bit floating point performance for LLM training, and over 250 PetaFLOP/s of 64-bit performance, for under 5MW. Isambard-AI integrates two, all-flash storage systems: a 20 PiByte Cray ClusterStor and a 3.5 PiByte VAST solution. Combined these give Isambard-AI flexibility for training, inference and secure data accesses and sharing. But it is the software stack where Isambard-AI will be most different from traditional HPC systems. Isambard-AI is designed to support users who may have been using GPUs in the cloud, and so access will more typically be via Jupyter notebooks, MLOps, or other web-based, interactive interfaces, rather than the approach used on traditional supercomputers of sshing into a system before submitting jobs to a batch scheduler. Its stack is designed to be quickly and regularly upgraded to keep pace with the rapid evolution of AI software, with full support for containers. Phase 1 of Isambard-AI is due online in May/June 2024, with the full system expected in production by the end of the year.

We present warpax, an open-source, GPU-accelerated Python toolkit for observer-robust energy-condition verification of warp drive spacetimes, together with a benchmark application to six warp-drive geometries that demonstrates the methodology and produces new quantitative findings. Existing tools evaluate energy conditions for a finite sample of observer directions. warpax replaces discrete sampling with continuous, gradient-based optimization over the full timelike observer manifold, backed by Hawking--Ellis algebraic classification. At Type~I stress-energy points, which dominate all tested metrics, an algebraic eigenvalue check determines energy-condition satisfaction exactly, independent of any observer search. At non-Type~I points, the optimizer provides rapidity-capped diagnostics. Stress-energy tensors are computed from the Arnowitt--Deser--Misner metric via forward-mode automatic differentiation, eliminating finite-difference truncation error. We apply warpax to five warp drive metrics (Alcubierre, Lentz, Van~Den~Broeck, Nat'ario, Rodal) and one warp shell metric. For several metrics, the standard Eulerian-frame analysis misses a significant fraction of violated grid points; even where it identifies the correct violation set, observer optimization reveals violation magnitudes can be orders of magnitude larger. These results demonstrate that single-frame evaluation can systematically underestimate both the spatial extent and severity of energy-condition violations. Throughout, we distinguish the invariant energy density (eigenvalue of T^a{}b) from the observer-dependent T{ab},u^a u^b and the Eulerian projection. All results use subluminal bubble velocities; at superluminal speeds, the Alcubierre-family metrics develop signature changes outside our assumptions. warpax is freely available at https://github.com/anindex/warpax

The field of plasma physics heavily relies on simulations to model various phenomena, such as instabilities, turbulence, and nonlinear behaviors that would otherwise be difficult to study from a purely theoretical approach. Simulations are fundamental in accurately setting up experiments, which can be extremely costly and complex. As high-fidelity tools, gyrokinetic simulations play a crucial role in discovering new physics, interpreting experimental results, and improving the design of next-generation devices. However, their high computational costs necessitate the use of acceleration platforms to reduce execution time. This work revolves around the TRIangular MEsh based Gyrokinetic (TRIMEG) code, which performs high-accuracy particle-in-cell plasma simulations in tokamak geometries, leveraging a novel finite element approach. The rise of graphical processing units (GPUs) constitutes an occasion to satisfy such computational needs, by offloading the most expensive portion of the code to the accelerators. The chosen approach features GPU offloading with the OpenMP API, which grants portability of the code to different architectures, namely AMD and NVIDIA. The particle pushing as well as the grid-to-particle operations have been ported to GPU platforms. Compiler limitations had to be overcome, and portions of the code were restructured to be suitable for GPU acceleration. Kernel performance was evaluated by carrying out GPU grid size exploration, as well as scalability studies. In addition, the efficiency of hybrid MPI-OpenMP offloading parallelization was assessed. The speedup of the GPU implementation was calculated by comparing it with the pure CPU version using different rationales. The Ion Temperature Gradient (ITG) mode was simulated using the GPU-accelerated version, and its correctness was verified in terms of the energy growth rate and the two-dimensional mode structures.

Autoregressive (AR) language modeling is the dominant paradigm for text generation, yet its sequential token-by-token decoding makes inference memory-bound and inefficient. Existing acceleration approaches, such as speculative decoding and diffusion language models, can yield speedups under certain conditions but do not directly address high-load batch serving--the scenario most critical for industrial-scale deployment. We introduce K-Forcing, a push-forward language modeling paradigm for joint next-k-token decoding. K-Forcing distills an existing AR model into a conditional push-forward mapping--one that transforms independent uniform noise variables into a joint sample of multiple future tokens in a single forward pass. This design preserves fixed-length outputs, reuses the AR teacher backbone, and remains compatible with standard AR serving infrastructure. We train this mapping via progressive self-forcing distillation, which gradually expands the prediction window while enabling the student to closely match the sequence distribution of the AR teacher. We evaluate K-Forcing on LM1B and OpenWebText using a standard causal Transformer backbone. When aggressively configured to generate k = 4 tokens per forward pass, K-Forcing delivers approximately 2.4-3.5x speedup across different batch sizes, while incurring modest quality degradation relative to its AR teacher. As inference increasingly dominates the lifetime compute cost of modern LLMs, K-Forcing offers a promising route toward accelerating AR generation under real-world high-load deployment.

Multi-agent systems based on large language models, particularly centralized architectures, have recently shown strong potential for complex and knowledge-intensive tasks. However, central agents often suffer from unstable long-horizon collaboration due to the lack of memory management, leading to context bloat, error accumulation, and poor cross-task generalization. To address both task-level memory inefficiency and the inability to reuse coordination experience, we propose StackPlanner, a hierarchical multi-agent framework with explicit memory control. StackPlanner addresses these challenges by decoupling high-level coordination from subtask execution with active task-level memory control, and by learning to retrieve and exploit reusable coordination experience via structured experience memory and reinforcement learning. Experiments on multiple deep-search and agent system benchmarks demonstrate the effectiveness of our approach in enabling reliable long-horizon multi-agent collaboration.

We introduce POPGym Arcade, a benchmark consisting of 7 pixel-based environments each with three difficulties, utilizing a single observation and action space. Each environment offers both fully observable and partially observable variants, enabling counterfactual studies on partial observability. POPGym Arcade utilizes JIT compilation on hardware accelerators to achieve substantial speedups over CPU-bound environments. Moreover, this enables Podracer-style architectures to further increase hardware utilization and training speed. We evaluate memory models on our environments using a Podracer variant of Q learning, and examine the results. Finally, we generate memory saliency maps, uncovering how memories propagate through policies. Our library is available at https://github.com/bolt-research/popgym_arcade.

The development of large language models (LLMs) has been instrumental in advancing state-of-the-art natural language processing applications. Training LLMs with billions of parameters and trillions of tokens require sophisticated distributed systems that enable composing and comparing several state-of-the-art techniques in order to efficiently scale across thousands of accelerators. However, existing solutions are complex, scattered across multiple libraries/repositories, lack interoperability, and are cumbersome to maintain. Thus, curating and empirically comparing training recipes require non-trivial engineering effort. This paper introduces TorchTitan, an open-source, PyTorch-native distributed training system that unifies state-of-the-art techniques, streamlining integration and reducing overhead. TorchTitan enables 3D parallelism in a modular manner with elastic scaling, providing comprehensive logging, checkpointing, and debugging tools for production-ready training. It also incorporates hardware-software co-designed solutions, leveraging features like Float8 training and SymmetricMemory. As a flexible test bed, TorchTitan facilitates custom recipe curation and comparison, allowing us to develop optimized training recipes for Llama 3.1 and provide guidance on selecting techniques for maximum efficiency based on our experiences. We thoroughly assess TorchTitan on the Llama 3.1 family of LLMs, spanning 8 billion to 405 billion parameters, and showcase its exceptional performance, modular composability, and elastic scalability. By stacking training optimizations, we demonstrate accelerations of 65.08% with 1D parallelism at the 128-GPU scale (Llama 3.1 8B), an additional 12.59% with 2D parallelism at the 256-GPU scale (Llama 3.1 70B), and an additional 30% with 3D parallelism at the 512-GPU scale (Llama 3.1 405B) on NVIDIA H100 GPUs over optimized baselines.

Hierarchical Instruction Following (HIF) refers to the problem of prompting large language models with a priority-ordered stack of instructions. Standard methods like RLHF and DPO typically fail in this problem since they mainly optimize for a single objective, failing to explicitly enforce system prompt compliance. Meanwhile, supervised fine-tuning relies on mimicking filtered, compliant data, which fails to establish the priority asymmetry at the algorithmic level. In this paper, we introduce HIPO, a novel alignment framework that formulates HIF as a Constrained Markov Decision Process. HIPO elevates system prompts from mere input context to strict algorithmic boundaries. Using a primal-dual safe reinforcement learning approach, the algorithm dynamically enforces system prompt compliance as an explicit constraint, maximizing user utility strictly within this feasible region. Extensive evaluations across diverse model architectures (e.g., Qwen, Phi, Llama) demonstrate that HIPO significantly improves both system compliance and user utility. Furthermore, mechanistic analysis reveals that this constrained optimization autonomously drives the model to shift its attention toward long-range system tokens, providing a principled foundation for reliable LLM deployment in complex workflows.

ANEForge is a Python package that programs the Apple Neural Engine (ANE), the fixed-function neural accelerator on every recent Apple device, directly and without CoreML. In production the engine is reachable only through CoreML, which treats it as a scheduling option: no configuration requires the ANE, and a model can silently run on the CPU or GPU instead. ANEForge compiles a lazy tensor graph, built from 58 fused operators and 19 native bridge operators, into a single ANE program. The program is dispatched through the same ANE daemon and kernel-driver stack as Apple's internal framework. Beyond inference, the package reaches the engine's native fused attention, streams int8, int4, and sparse weights, keeps decoder and optimizer state resident across steps, and runs the forward pass, backward pass, and optimizer update of training on the engine. A small fused program completes a call in about 90us, near the engine's 70us per-program dispatch floor, and a pretrained ResNet-18 forward runs end-to-end in 0.33ms. ResNet-18, a sentence encoder, and a Vision Transformer run end-to-end against framework references, and a Stable Diffusion U-Net validates its forward pass. ANEForge targets Apple Silicon under macOS 14 and later. Each release is verified against a recorded macOS and ANE-compiler version.

This is an implementation and measurement study of what it costs to run a streaming speech enhancer on a CPU. We port FastEnhancer-Medium at 48 kHz to faster-enhancer.c, a C runtime with six int8 GEMM tiers selected at initialization, leaving architecture and weights untouched. One Apple M2 core reaches 0.069 real-time factor, against 0.230 for the fp32 ONNX Runtime graph on the same machine, a 3.3x speedup. A Galaxy S23+ (Snapdragon 8 Gen 2) reaches 0.096. The speedup comes from specializing every layer of the runtime around one fixed model. Activation ranges are recomputed per frame, so no calibration set is needed; the k=3 convolutions use Winograd F(2,3); cross-stage state is fp16; the GRU and the dequantization epilogues are fused; and nothing is allocated after startup. Over 824 VoiceBank-DEMAND utterances the engine tracks fp32 to within -0.006 PESQ and -0.08 dB SNR. Speed alone does not settle deployment cost. The enhancer holds a fraction of a core for as long as the microphone is open, so its real-time factor is a duty cycle. A benchmark races through a file; an audio callback does not. Pacing to the 6.67 ms deadline costs 4.2x per frame, saves 49% of the energy, and leaves the cheapest core placement missing 96% of its deadlines. All SIMD tiers within an architecture family emit byte-identical output. The runtime is released as a dependency-free library.

Programming assistants powered by large language models have transformed software development, yet most benchmarks focus narrowly on code generation tasks. Recent efforts like InfiBench and StackEval attempt to address this gap using Stack Overflow data but remain limited to single-turn interactions in isolated contexts, require significant manual curation, and fail to represent complete project environments. We introduce CodeAssistBench (CAB), the first benchmark framework for evaluating multi-turn programming assistance in realistic settings that address real-world questions about actual codebases. Unlike existing programming Q&A benchmarks, CAB automatically generates scalable datasets from question-related GitHub issues using configurable parameters (e.g., repository creation date, star count, programming languages), and includes automatic containerization of codebases for evaluation. It then evaluates models through simulated users in these containerized environments with full codebase access. Using this framework, we constructed a test set of 3,286 real-world programming questions across 231 repositories, spanning seven programming languages and diverse problem domains. Our evaluation of leading LLMs reveals a substantial capability gap: while models perform well on Stack Overflow questions with success rates of 70-83%, they resolve only up to 16.49% of CAB's recent issues. This discrepancy highlights the challenges of providing assistance in complex, project-specific contexts versus answering standalone questions.

Traditional control methods are inadequate in many deployment settings involving control of Cyber-Physical Systems (CPS). In such settings, CPS controllers must operate and respond to unpredictable interactions, conditions, or failure modes. Dealing with such unpredictability requires the use of executive and cognitive control functions that allow for planning and reasoning. Motivated by the sport of drone racing, this dissertation addresses these concerns for state-of-the-art flight control by investigating the use of deep neural networks to bring essential elements of higher-level cognition for constructing low level flight controllers. This thesis reports on the development and release of an open source, full solution stack for building neuro-flight controllers. This stack consists of the methodology for constructing a multicopter digital twin for synthesize the flight controller unique to a specific aircraft, a tuning framework for implementing training environments (GymFC), and a firmware for the world's first neural network supported flight controller (Neuroflight). GymFC's novel approach fuses together the digital twinning paradigm for flight control training to provide seamless transfer to hardware. Additionally, this thesis examines alternative reward system functions as well as changes to the software environment to bridge the gap between the simulation and real world deployment environments. Work summarized in this thesis demonstrates that reinforcement learning is able to be leveraged for training neural network controllers capable, not only of maintaining stable flight, but also precision aerobatic maneuvers in real world settings. As such, this work provides a foundation for developing the next generation of flight control systems.

Robotics manipulation research increasingly focuses on two-finger parallel grippers for their effectiveness, affordability, and ease of teleoperation. Grippers are nonetheless limited by their form factor, often requiring bimanual setups even for simple reorientation tasks. Anthropomorphic hands are a more natural platform for dexterous robot learning -- closer to the human hand, and capable of learning from human video -- yet they remain hard to use in learning research: even where open and accessible hand hardware exists, the software for control, simulation, teleoperation, and retargeting is scattered in one-off code bases, and largely disconnected from the robot-learning ecosystem. In this work, we introduce the \orca~learning stack, an open-source research stack for dexterity as a first-class robot learning domain. Our \orca~stack unifies low-level control, simulation, teleoperation from a range of consumer platforms, and hand retargeting, behind a single interface, and integrates natively with popular robot-learning frameworks such as \lerobot, so dexterous hand researchers can leverage the same data, training, and evaluation pipelines used for non-dexterous robot learning. We demonstrate a complete end-to-end workflow, collecting expert demonstrations of an in-hand reorientation task by teleoperation with a consumer-grade VR headset, training an autonomous policy with \lerobot, and evaluating the learned policy in a fully reproducible and observable setup. We open-source the entire stack as a shared, reproducible foundation for dexterous-manipulation research.

Deploying LLMs efficiently requires testing hundreds of serving configurations, but evaluating each one on a GPU cluster takes hours and costs thousands of dollars. Discrete-event simulators are faster and cheaper, but they require re-implementing the serving system's control logic -- a burden that compounds as frameworks evolve. We present Revati, a time-warp emulator that enables performance modeling by directly executing real serving system code at simulation-like speed. The system intercepts CUDA API calls to virtualize device management, allowing serving frameworks to run without physical GPUs. Instead of executing GPU kernels, it performs time jumps -- fast-forwarding virtual time by predicted kernel durations. We propose a coordination protocol that synchronizes these jumps across distributed processes while preserving causality. On vLLM and SGLang, Revati achieves less than 5% prediction error across multiple models and parallelism configurations, while running 5-17x faster than real GPU execution.

Large Language Models (LLMs) are consistently improving at increasingly realistic software engineering (SE) tasks. In real-world software stacks, significant SE effort is spent developing foundational system software like the Linux kernel. Unlike application-level software, a systems codebase like Linux is multilingual (low-level C/Assembly/Bash/Rust); gigantic (>20 million lines); critical (impacting billions of devices worldwide), and highly concurrent (involving complex multi-threading). To evaluate if ML models are useful while developing such large-scale systems-level software, we introduce kGym (a platform) and kBench (a dataset). The kGym platform provides a SE environment for large-scale experiments on the Linux kernel, including compiling and running kernels in parallel across several virtual machines, detecting operations and crashes, inspecting logs, and querying and patching the code base. We use kGym to facilitate evaluation on kBench, a crash resolution benchmark drawn from real-world Linux kernel bugs. An example bug in kBench contains crashing stack traces, a bug-reproducer file, a developer-written fix, and other associated data. To understand current performance, we conduct baseline experiments by prompting LLMs to resolve Linux kernel crashes. Our initial evaluations reveal that the best performing LLM achieves 0.72% and 5.38% in the unassisted and assisted (i.e., buggy files disclosed to the model) settings, respectively. These results highlight the need for further research to enhance model performance in SE tasks. Improving performance on kBench requires models to master new learning skills, including understanding the cause of crashes and repairing faults, writing memory-safe and hardware-aware code, and understanding concurrency. As a result, this work opens up multiple avenues of research at the intersection of machine learning and systems software.

Since GPT, most Transformers have repeated the same attention mechanism at every layer. Yet this design is largely a convention rather than a tested conclusion. When multiple sequence mixers are combined in one stack, improvements may arise from mechanism choice, placement, or both, making causal attribution difficult. We introduce Aether-7B-5Attn, a 6.59B-parameter mixture-of-experts model (approx2.98B active) whose 49 layers contain seven sequence-mixing mechanisms arranged as a 7times7 Latin square. Because each mechanism appears exactly once in every row and column, the design guarantees balanced exposure across depth while eliminating placement confounds. To evaluate this principle, we build a parameter-matched proxy with four mechanisms arranged as a 4times4 Latin square over sixteen layers, matched to 700.9M parameters and trained with eight seeds per arm. The results reveal a clear dissociation. Rearranging a distributed heterogeneous stack into a balanced periodic cycle changes validation loss by only 0.16\%, indicating that exact placement has little effect. In contrast, clustering the same mechanisms into contiguous depth bands incurs a 0.59\% penalty, while replacing the heterogeneous stack with a homogeneous one incurs a 1.68\% penalty. These results indicate that performance depends primarily on heterogeneous composition distributed across depth rather than on any particular permutation. We confirm this finding at 2.16times larger scale (1.514B parameters), where the homogeneous-stack penalty increases to 2.63\% and removing the SSM-family mechanism produces a 3.20\% degradation. We further report per-mechanism cost profiles, English and Korean evaluations, and a causal-safety audit of all 49 layers. We release model weights, training recipes, training code, logs, and architecture source code.

The Muon optimizer has recently offered a promising alternative to AdamW for large language model training, leveraging matrix orthogonalization to produce geometry-aware updates. However, like all first-order methods, Muon can become trapped in sharp local minima. In this work, we present MONA, an optimizer that bridges Muon's orthogonalization framework with curvature-aware acceleration. MONA adds an acceleration term directly into Muon's gradient processing pipeline. This term is calculated from the exponential moving average of gradient differences. We provide a detailed convergence analysis for MONA, showing that the acceleration term enables escape from sharp minima while preserving Muon's spectral-norm regularization. Empirically, MONA achieves better convergence and downstream task performance compared to both Muon and AdamW across three scales of Mixture-of-Experts pretraining, spanning from 1B to 68B parameters, with the largest model trained on 1 trillion tokens. Furthermore, we conduct supervised fine-tuning on the MOE-68B-A3B model and evaluate it on general capability, mathematical reasoning, and code generation benchmarks, where MONA achieves SOTA performance.

Many problems in astrophysics cover multiple orders of magnitude in spatial and temporal scales. While simulating systems that experience rapid changes in these conditions, it is essential to adapt the (time-) step size to capture the behavior of the system during those rapid changes and use a less accurate time step at other, less demanding, moments. We encounter three problems with traditional methods. Firstly, making such changes requires expert knowledge of the astrophysics as well as of the details of the numerical implementation. Secondly, some parameters that determine the time-step size are fixed throughout the simulation, which means that they do not adapt to the rapidly changing conditions of the problem. Lastly, we would like the choice of time-step size to balance accuracy and computation effort. We address these challenges with Reinforcement Learning by training it to select the time-step size dynamically. We use the integration of a system of three equal-mass bodies that move due to their mutual gravity as an example of its application. With our method, the selected integration parameter adapts to the specific requirements of the problem, both in terms of computation time and accuracy while eliminating the expert knowledge needed to set up these simulations. Our method produces results competitive to existing methods and improve the results found with the most commonly-used values of time-step parameter. This method can be applied to other integrators without further retraining. We show that this extrapolation works for variable time-step integrators but does not perform to the desired accuracy for fixed time-step integrators.

Over the last three decades, innovations in the memory subsystem were primarily targeted at overcoming the data movement bottleneck. In this paper, we focus on a specific market trend in memory technology: 3D-stacked memory and caches. We investigate the impact of extending the on-chip memory capabilities in future HPC-focused processors, particularly by 3D-stacked SRAM. First, we propose a method oblivious to the memory subsystem to gauge the upper-bound in performance improvements when data movement costs are eliminated. Then, using the gem5 simulator, we model two variants of LARC, a processor fabricated in 1.5 nm and enriched with high-capacity 3D-stacked cache. With a volume of experiments involving a board set of proxy-applications and benchmarks, we aim to reveal where HPC CPU performance could be circa 2028, and conclude an average boost of 9.77x for cache-sensitive HPC applications, on a per-chip basis. Additionally, we exhaustively document our methodological exploration to motivate HPC centers to drive their own technological agenda through enhanced co-design.

We present INTELLECT-3, a 106B-parameter Mixture-of-Experts model (12B active) trained with large-scale reinforcement learning on our end-to-end RL infrastructure stack. INTELLECT-3 achieves state of the art performance for its size across math, code, science and reasoning benchmarks, outperforming many larger frontier models. We open-source the model together with the full infrastructure stack used to create it, including RL frameworks, complete recipe, and a wide collection of environments, built with the verifiers library, for training and evaluation from our Environments Hub community platform. Built for this effort, we introduce prime-rl, an open framework for large-scale asynchronous reinforcement learning, which scales seamlessly from a single node to thousands of GPUs, and is tailored for agentic RL with first-class support for multi-turn interactions and tool use. Using this stack, we run both SFT and RL training on top of the GLM-4.5-Air-Base model, scaling RL training up to 512 H200s with high training efficiency.

We investigate magnetic-field amplification driven by the nonresonant hybrid (NRH or Bell) instability and its impact on cosmic-ray (CR) acceleration at reverse shocks of ultrafast outflows (UFOs) from active galactic nuclei (AGN). Previous kinetic studies by particle-in-cell simulations have demonstrated that when maximum CR energy is near the injection scale, NRH instability efficiently amplifies magnetic field up to the saturation level. However, the efficiency of NRH instability goes down as maximum energy increase since CR current is carried by escaping CRs near the maximum energy. We employ a one-dimensional MHD--CR framework solving telegraph-type diffusion--convection equations to trace the coupled evolution of CRs, magnetic fields, and shock dynamics under realistic parameters. We find a distinct transition with magnetic field strength: for weak background fields (B_{0}!lesssim!10^{-4},G), NRH instability efficiently amplifies upstream turbulence, driving a self-regulated state where E_{max} becomes independent of initial strength of magnetic turbulence. In contrast, for stronger background fields (B_{0}!gtrsim!10^{-3},G), the escaping CR current is too weak to drive NRH instability, and magnetic turbulence further decays through parametric instabilities, potentially reducing the acceleration efficiency. We give the physical interpretation for the transition and discuss conditions for PeV--EeV acceleration at UFO reverse shocks.

Video generators are increasingly evaluated as potential world models, which requires them to encode and understand physical laws. We investigate their representation of a fundamental law: gravity. Out-of-the-box video generators consistently generate objects falling at an effectively slower acceleration. However, these physical tests are often confounded by ambiguous metric scale. We first investigate if observed physical errors are artifacts of these ambiguities (e.g., incorrect frame rate assumptions). We find that even temporal rescaling cannot correct the high-variance gravity artifacts. To rigorously isolate the underlying physical representation from these confounds, we introduce a unit-free, two-object protocol that tests the timing ratio t_1^2/t_2^2 = h_1/h_2, a relationship independent of g, focal length, and scale. This relative test reveals violations of Galileo's equivalence principle. We then demonstrate that this physical gap can be partially mitigated with targeted specialization. A lightweight low-rank adaptor fine-tuned on only 100 single-ball clips raises g_{eff} from 1.81,m/s^2 to 6.43,m/s^2 (reaching 65% of terrestrial gravity). This specialist adaptor also generalizes zero-shot to two-ball drops and inclined planes, offering initial evidence that specific physical laws can be corrected with minimal data.

The rapid advancement of Large Language Models (LLMs) has driven the need for more efficient serving strategies. In this context, efficiency refers to the proportion of requests that meet their Service Level Objectives (SLOs), particularly for Time To First Token (TTFT) and Time Between Tokens (TBT). However, existing systems often prioritize one metric at the cost of the other. We present Ascendra, an LLM serving system designed to meet both TTFT and TBT SLOs simultaneously. The core insight behind Ascendra is that a request's urgency evolves as it approaches its deadline. To leverage this, Ascendra partitions GPU resources into two types of instances: low-priority and high-priority. Low-priority instances maximize throughput by processing requests out of arrival order, but at the risk of request starvation. To address this, Ascendra employs a performance model to predict requests at risk of missing their SLOs and proactively offloads them to high-priority instances. High-priority instances are optimized for low-latency execution and handle urgent requests nearing their deadlines. This partitioned architecture enables Ascendra to effectively balance high throughput and low latency. Extensive evaluation shows that Ascendra improves system throughput by up to 1.7x compared to vLLM and Sarathi-Serve while meeting both TTFT and TBT SLOs.

FlashAttention series has been widely applied in the inference of large language models (LLMs). However, FlashAttention series only supports the high-level GPU architectures, e.g., Ampere and Hopper. At present, FlashAttention series is not easily transferrable to NPUs and low-resource GPUs. Moreover, FlashAttention series is inefficient for multi- NPUs or GPUs inference scenarios. In this work, we propose FastAttention which pioneers the adaptation of FlashAttention series for NPUs and low-resource GPUs to boost LLM inference efficiency. Specifically, we take Ascend NPUs and Volta-based GPUs as representatives for designing our FastAttention. We migrate FlashAttention series to Ascend NPUs by proposing a novel two-level tiling strategy for runtime speedup, tiling-mask strategy for memory saving and the tiling-AllReduce strategy for reducing communication overhead, respectively. Besides, we adapt FlashAttention for Volta-based GPUs by redesigning the operands layout in shared memory and introducing a simple yet effective CPU-GPU cooperative strategy for efficient memory utilization. On Ascend NPUs, our FastAttention can achieve a 10.7times speedup compared to the standard attention implementation. Llama-7B within FastAttention reaches up to 5.16times higher throughput than within the standard attention. On Volta architecture GPUs, FastAttention yields 1.43times speedup compared to its equivalents in xformers. Pangu-38B within FastAttention brings 1.46times end-to-end speedup using FasterTransformer. Coupled with the propose CPU-GPU cooperative strategy, FastAttention supports a maximal input length of 256K on 8 V100 GPUs. All the codes will be made available soon.

Concurrent local LLM serving on unified-memory desktops must preserve memory headroom and output fidelity, which speed-only rankings overlook. We introduce SiliconBench, which evaluates nine Apple Silicon serving engines through three lenses: speed, memory, and fidelity. We evaluate chat and agent serving on Qwen3, Qwen3.5, and Gemma 4. We use a classification task to check for quality regressions against an NVIDIA reference. DGX Spark provides a complementary serving-performance reference. Three desiderata guide interpretation: serving architecture readiness, memory discipline, and multi-node scaling. On Qwen3-0.6B, vllm-metal alone more than doubles throughput on both workloads from concurrency 1 to 16. CUDA vLLM and SGLang show stronger concurrency scaling on the same prompts. Explicit memory budgets do not guarantee memory headroom: two stacks complete every request while memory use approaches physical capacity and throughput declines. The newer model architectures have narrower engine support. Their evaluated implementations match the fidelity reference. Only three stacks satisfy the completion, fidelity, and model-coverage gates. Comparisons on larger dense and MoE models reinforce the importance of scheduling prompt processing alongside ongoing generation: vllm-metal's packed prefill-decode path maintains lower first-token latency than omlx under concurrent load. In the tested two-machine configurations, tensor parallelism over Thunderbolt RDMA scales while pipeline parallelism over TCP regresses. We release benchmark code, per-run results, and maintenance journals, supported by a workflow combining bounded agent fixes with human review.

Simulation has been pivotal in recent robotics milestones and is poised to play a prominent role in the field's future. However, recent robotic advances often rely on expensive and high-maintenance platforms, limiting access to broader robotics audiences. This work introduces Wheeled Lab, a framework for the low-cost, open-source wheeled platforms that are already widely established in education and research. Through integration with Isaac Lab, Wheeled Lab introduces modern techniques in Sim2Real, such as domain randomization, sensor simulation, and end-to-end learning, to new user communities. To kickstart education and demonstrate the framework's capabilities, we develop three state-of-the-art policies for small-scale RC cars: controlled drifting, elevation traversal, and visual navigation, each trained in simulation and deployed in the real world. By bridging the gap between advanced Sim2Real methods and affordable, available robotics, Wheeled Lab aims to democratize access to cutting-edge tools, fostering innovation and education in a broader robotics context. The full stack, from hardware to software, is low cost and open-source.

Using Large Language Models (LLMs) in real-world applications presents significant challenges, particularly in balancing computational efficiency with model performance. Optimizing acceleration after fine-tuning and during inference is critical for building efficient architectures. This paper introduces Zero-Shot Adjustable Acceleration, a novel training and inference method that dynamically adjusts hardware utilization during inference without requiring additional fine-tuning. The proposed approach is applied to recent LLMs and evaluated across multiple classification and text generation tasks. Experimental results demonstrate that the method supports a wide range of zero-shot acceleration and achieves up to 11x speedup compared to the baseline.

Large language model (LLM) serving infrastructures are undergoing a shift toward heterogeneity and disaggregation. Modern deployments increasingly integrate diverse accelerators and near-memory processing technologies, introducing significant hardware heterogeneity, while system software increasingly separates computation, memory, and model components across distributed resources to improve scalability and efficiency. As a result, LLM serving performance is no longer determined by hardware or software choices in isolation, but by their runtime interaction through scheduling, data movement, and interconnect behavior. However, understanding these interactions remains challenging, as existing simulators lack the ability to jointly model heterogeneous hardware and disaggregated serving techniques within a unified, runtime-driven framework. This paper presents LLMServingSim 2.0, a unified system-level simulator designed to make runtime-driven hardware-software interactions in heterogeneous and disaggregated LLM serving infrastructures explicit and analyzable. LLMServingSim 2.0 embeds serving decisions and hardware behavior into a single runtime loop, enabling interaction-aware modeling of batching, routing, offloading, memory, and power. The simulator supports extensible integration of emerging accelerators and memory systems through profile-based modeling, while capturing dynamic serving behavior and system-level effects. We validate LLMServingSim 2.0 against real deployments, showing that it reproduces key performance, memory, and power metrics with an average error of 0.95%, while maintaining simulation times of around 10 minutes even for complex configurations. These results demonstrate that LLMServingSim 2.0 provides a practical bridge between hardware innovation and serving-system design, enabling systematic exploration and co-design for next-generation LLM serving infrastructures.

Since Volta introduced Independent Thread Scheduling (ITS), NVIDIA GPUs have been widely assumed to handle warp divergence in a fixed manner. We test this assumption across Ampere, Hopper, and datacenter and consumer Blackwell GPUs, using pre-ITS Pascal as a baseline. Combining cycle-accurate microbenchmarks, hardware counters, and static analysis of compiler-generated SASS, we separate stable behavior from architectural change. Across all tested generations, divergent paths serialize linearly with the number of paths k, following T(k) approx sk with no super-linear reconvergence penalty. Warp execution efficiency falls as 32/k, the penalty is independent of occupancy, and predication removes the serialization cost. The same behavior appears on Pascal, showing that this programmer-visible cost model predates ITS. The compiler-emitted reconvergence machinery, however, has changed substantially. Pascal uses a per-warp SSY/SYNC instruction stack, whereas later generations use barrier-register instructions. Deferred reconvergence beyond the immediate post-dominator falls from 29 cases on Ampere to 2 on Blackwell. Blackwell also introduces a two-tier convergence-barrier classification, uniform-branch instructions, and explicit partial-mask warp synchronization, none of which appear on Ampere or Hopper. Controlled bit-flip experiments indicate that the new barrier class is a static compiler classification with no observable runtime effect in our tests. Thus, divergence retains a stable and predictable performance cost even as NVIDIA's control-flow ISA and reconvergence mechanisms continue to evolve.

We present the design, implementation and engineering experience in building and deploying MegaScale, a production system for training large language models (LLMs) at the scale of more than 10,000 GPUs. Training LLMs at this scale brings unprecedented challenges to training efficiency and stability. We take a full-stack approach that co-designs the algorithmic and system components across model block and optimizer design, computation and communication overlapping, operator optimization, data pipeline, and network performance tuning. Maintaining high efficiency throughout the training process (i.e., stability) is an important consideration in production given the long extent of LLM training jobs. Many hard stability issues only emerge at large scale, and in-depth observability is the key to address them. We develop a set of diagnosis tools to monitor system components and events deep in the stack, identify root causes, and derive effective techniques to achieve fault tolerance and mitigate stragglers. MegaScale achieves 55.2% Model FLOPs Utilization (MFU) when training a 175B LLM model on 12,288 GPUs, improving the MFU by 1.34x compared to Megatron-LM. We share our operational experience in identifying and fixing failures and stragglers. We hope by articulating the problems and sharing our experience from a systems perspective, this work can inspire future LLM systems research.

On the way to Exascale, programmers face the increasing challenge of having to support multiple hardware architectures from the same code base. At the same time, portability of code and performance are increasingly difficult to achieve as hardware architectures are becoming more and more diverse. Today's heterogeneous systems often include two or more completely distinct and incompatible hardware execution models, such as GPGPU's, SIMD vector units, and general purpose cores which conventionally have to be programmed using separate tool chains representing non-overlapping programming models. The recent revival of interest in the industry and the wider community for the C++ language has spurred a remarkable amount of standardization proposals and technical specifications in the arena of concurrency and parallelism. This recently includes an increasing amount of discussion around the need for a uniform, higher-level abstraction and programming model for parallelism in the C++ standard targeting heterogeneous and distributed computing. Such an abstraction should perfectly blend with existing, already standardized language and library features, but should also be generic enough to support future hardware developments. In this paper, we present the results from developing such a higher-level programming abstraction for parallelism in C++ which aims at enabling code and performance portability over a wide range of architectures and for various types of parallelism. We present and compare performance data obtained from running the well-known STREAM benchmark ported to our higher level C++ abstraction with the corresponding results from running it natively. We show that our abstractions enable performance at least as good as the comparable base-line benchmarks while providing a uniform programming API on all compared target architectures.

A key strength of managed runtimes over hardware is the ability to gain detailed insight into the dynamic execution of programs with instrumentation. Analyses such as code coverage, execution frequency, tracing, and debugging, are all made easier in a virtual setting. As a portable, low-level bytecode, WebAssembly offers inexpensive in-process sandboxing with high performance. Yet to date, Wasm engines have not offered much insight into executing programs, supporting at best bytecode-level stepping and basic source maps, but no instrumentation capabilities. In this paper, we show the first non-intrusive dynamic instrumentation system for WebAssembly in the open-source Wizard Research Engine. Our innovative design offers a flexible, complete hierarchy of instrumentation primitives that support building high-level, complex analyses in terms of low-level, programmable probes. In contrast to emulation or machine code instrumentation, injecting probes at the bytecode level increases expressiveness and vastly simplifies the implementation by reusing the engine's JIT compiler, interpreter, and deoptimization mechanism rather than building new ones. Wizard supports both dynamic instrumentation insertion and removal while providing consistency guarantees, which is key to composing multiple analyses without interference. We detail a fully-featured implementation in a high-performance multi-tier Wasm engine, show novel optimizations specifically designed to minimize instrumentation overhead, and evaluate performance characteristics under load from various analyses. This design is well-suited for production engine adoption as probes can be implemented to have no impact on production performance when not in use.

JEPA-family world models use a static predictor whose weights do not adapt when test-time dynamics diverge from training. We compare two mechanisms for incorporating accumulated experience into a JEPA predictor under distribution shift: operand-side injection, where a compressed experience representation is added as a residual to the predictor's hidden state (EI-JEPA), and operator-side modulation, where the same representation generates low-rank weight deltas via LoRA applied to the predictor's weights (EPM-JEPA). On a pre-registered comparison (Moving MNIST, gravity shift), EPM-JEPA (D_shift^{n=50} = 0.7848 +/- 0.0078, three seeds) differs from EI-JEPA (0.8238) by delta = 4.74% - Outcome C: a null result - by our stated criterion, a valid outcome. As a secondary, non-pre-registered observation, EPM-JEPA improves 1.90% over a no-memory baseline (0.8000), consistently across seeds, while EI-JEPA underperforms the baseline, indicating the benefit is specific to weight-level modulation. Our primary contribution is a mechanism analysis: the D_shift^{n=50} trajectory reflects three independent dynamical processes - buffer cycling, EMA target drift, and an intrinsic LoRA settling transient of +0.021 - rather than convergence to equilibrium. These findings motivate PEM-JEPA, a physics-grounded successor addressing this dynamical-peak limitation.

Context: Just-in-Time (JIT) compilers are able to specialize the code they generate according to a continuous profiling of the running programs. This gives them an advantage when compared to Ahead-of-Time (AoT) compilers that must choose the code to generate once for all. Inquiry: Is it possible to improve the performance of AoT compilers by adding Dynamic Binary Modification (DBM) to the executions? Approach: We added to the Hopc AoT JavaScript compiler a new optimization based on DBM to the inline cache (IC), a classical optimization dynamic languages use to implement object property accesses efficiently. Knowledge: Reducing the number of memory accesses as the new optimization does, does not shorten execution times on contemporary architectures. Grounding: The DBM optimization we have implemented is fully operational on x86_64 architectures. We have conducted several experiments to evaluate its impact on performance and to study the reasons of the lack of acceleration. Importance: The (negative) result we present in this paper sheds new light on the best strategy to be used to implement dynamic languages. It tells that the old days were removing instructions or removing memory reads always yielded to speed up is over. Nowadays, implementing sophisticated compiler optimizations is only worth the effort if the processor is not able by itself to accelerate the code. This result applies to AoT compilers as well as JIT compilers.

Time Series Language Models (TSLMs) are emerging as unified models for reasoning over continuous signals in natural language. However, long-context retrieval remains a major limitation: existing models are typically trained and evaluated on short sequences, while real-world time-series sensor streams can span millions of datapoints. This mismatch requires precise temporal localization under strict computational constraints, a regime that is not captured by current benchmarks. We introduce TS-Haystack, a long-context temporal retrieval benchmark comprising ten task types across four categories: direct retrieval, temporal reasoning, multi-step reasoning and contextual anomaly. The benchmark uses controlled needle insertion by embedding short activity bouts into longer longitudinal accelerometer recordings, enabling systematic evaluation across context lengths ranging from seconds to 2 hours per sample. We hypothesize that existing TSLM time series encoders overlook temporal granularity as context length increases, creating a task-dependent effect: compression aids classification but impairs retrieval of localized events. Across multiple model and encoding strategies, we observe a consistent divergence between classification and retrieval behavior. Learned latent compression preserves or improves classification accuracy at compression ratios up to 176times, but retrieval performance degrades with context length, incurring in the loss of temporally localized information. These results highlight the importance of architectural designs that decouple sequence length from computational complexity while preserving temporal fidelity.

Long-horizon tool agents are bottlenecked by how their context grows toward the limits of the context window. Recent systems make context management agent- or system-controlled, but they either learn a compression policy that discards evidence or manage context in a layer the agent never sees. We argue both leave a more basic gap unaddressed. Frontier language models are proprioceptively blind to their own context. From the prompt alone they cannot see how large, how old, or how used each block is, the signals a keep-or-drop decision needs. We hypothesize that competent context management is already latent in capable models, and that what is missing is not a learned policy but an interface exposing this state. We introduce VISTA (Visible Internal State for Tool Agents), a training-free, model-agnostic layer that represents working memory as typed, addressable blocks, surfaces a runtime dashboard of per-block token usage, recency, and access history, and archives blocks as recoverable full-fidelity payloads. On LOCA-Bench, BrowseComp-Plus, and GAIA, the same untrained interface transfers across million-, 100K-, and 10K-scale trajectories. On LOCA-Bench it improves four backbones and lifts Gemini-3-Flash from 22.7 to 50.7%. The lift grows with context pressure and transfers across backbones. Ablations further confirm that the dashboard matters beyond archive and recovery tools.

Frontier open-weight models are increasingly available, but serving them still largely assumes datacenter infrastructure. We present FreeToken, an edge-native MoE serving system that treats a personal machine not as a small GPU, but as a unified, elastic inference platform. FreeToken co-designs the full serving stack, including model layout and loading, expert residency, CPU--GPU execution, agentic state reuse, and runtime memory management, around two realities of local AI: agent workloads continuously change their execution pattern, and edge hardware exposes heterogeneous resources whose balance differs from machine to machine. Rather than committing to a fixed offloading strategy, FreeToken continuously maps computation and model state onto the resources actually available. FreeToken supports more than 20 MoE models and real coding and tool-using agents across hardware ranging from an 8GB laptop GPU to a single workstation GPU. More importantly, it changes what these machines can practically serve, from a 35B model on a laptop to a 284B model on a gaming desktop and the 753B GLM-5.2 on a single workstation GPU. FreeToken turns open weights into deployable local software, making the machines users already own a practical platform for frontier-scale intelligence. We release the system at flashml.ai.

Rectified flow and reflow procedures have significantly advanced fast generation by progressively straightening ordinary differential equation (ODE) flows. They operate under the assumption that image and noise pairs, known as couplings, can be approximated by straight trajectories with constant velocity. However, we observe that modeling with constant velocity and using reflow procedures have limitations in accurately learning straight trajectories between pairs, resulting in suboptimal performance in few-step generation. To address these limitations, we introduce Constant Acceleration Flow (CAF), a novel framework based on a simple constant acceleration equation. CAF introduces acceleration as an additional learnable variable, allowing for more expressive and accurate estimation of the ODE flow. Moreover, we propose two techniques to further improve estimation accuracy: initial velocity conditioning for the acceleration model and a reflow process for the initial velocity. Our comprehensive studies on toy datasets, CIFAR-10, and ImageNet 64x64 demonstrate that CAF outperforms state-of-the-art baselines for one-step generation. We also show that CAF dramatically improves few-step coupling preservation and inversion over Rectified flow. Code is available at https://github.com/mlvlab/CAF{https://github.com/mlvlab/CAF}.

The emergence of Superchips represents a significant advancement in next-generation AI hardware. These Superchips employ a tightly coupled heterogeneous architecture that integrates GPU and CPU on the same package, which offers unprecedented computational power. However, there has been scant research investigating how LLM training benefits from this new architecture. In this work, for the first time, we study LLM training solutions based on offloading for Superchips. We observe important differences between Superchips and traditional loosely-coupled GPU-CPU architecture, which necessitate revisiting prevailing assumptions about offloading. Based on that, we present SuperOffload, a Superchip-centric offloading system that simultaneously uses Hopper GPU, Grace CPU, and NVLink-C2C interconnect more efficiently. SuperOffload accomplishes this via a combination of techniques, such as adaptive weight offloading, bucketization repartitioning, Superchip-aware casting, speculative execution, and a highly optimized Adam optimizer for Grace CPUs. Our evaluation of SuperOffload on NVIDIA GH200 demonstrates up to 2.5x throughput improvement compared to state-of-the-art offloading-based systems, enabling training of up to 25B model on a single Superchip while achieving high training throughput. We also extend SuperOffload with ZeRO-style data parallelism and DeepSpeed-Ulysses sequence parallelism, enabling training of 13B model with sequence lengths up to 1 million tokens on 8 GH200 while achieving 55% MFU.

Large Language Models (LLMs) are fundamentally constrained by the quadratic computational cost of self-attention and the "Lost in the Middle" phenomenon, where reasoning capabilities degrade as context windows expand. Existing solutions, primarily "Flat RAG" architectures relying on vector databases, treat memory as an unstructured bag of embeddings, failing to capture the hierarchical and temporal structure of long-horizon interactions. This paper presents Aeon, a Neuro-Symbolic Cognitive Operating System that redefines memory as a managed OS resource. Aeon structures memory into a Memory Palace (a spatial index implemented via Atlas, a SIMD-accelerated Page-Clustered Vector Index) and a Trace (a neuro-symbolic episodic graph). This architecture introduces three advances: (1) Symmetric INT8 Scalar Quantization, achieving 3.1x spatial compression and 5.6x math acceleration via NEON SDOT intrinsics; (2) a decoupled Write-Ahead Log (WAL) ensuring crash-recoverability with statistically negligible overhead (<1%); and (3) a Sidecar Blob Arena eliminating the prior 440-character text ceiling via an append-only mmap-backed blob file with generational garbage collection. The Semantic Lookaside Buffer (SLB) exploits conversational locality to achieve sub-5us retrieval latencies, with INT8 vectors dequantized to FP32 on cache insertion to preserve L1-resident lookup performance. Benchmarks on Apple M4 Max demonstrate that the combined architecture achieves 4.70ns INT8 dot product latency, 3.09us tree traversal at 100K nodes (3.4x over FP32), and P99 read latency of 750ns under hostile 16-thread contention via epoch-based reclamation.

Large Language Models (LLMs) play an ever-increasing role in the field of Artificial Intelligence (AI)--not only for natural language processing but also for code understanding and generation. To stimulate open and responsible research on LLMs for code, we introduce The Stack, a 3.1 TB dataset consisting of permissively licensed source code in 30 programming languages. We describe how we collect the full dataset, construct a permissively licensed subset, present a data governance plan, discuss limitations, and show promising results on text2code benchmarks by training 350M-parameter decoders on different Python subsets. We find that (1) near-deduplicating the data significantly boosts performance across all experiments, and (2) it is possible to match previously reported HumanEval and MBPP performance using only permissively licensed data. We make the dataset available at https://hf.co/BigCode, provide a tool called "Am I in The Stack" (https://hf.co/spaces/bigcode/in-the-stack) for developers to search The Stack for copies of their code, and provide a process for code to be removed from the dataset by following the instructions at https://www.bigcode-project.org/docs/about/the-stack/.

Training and deployed inference often cross export, conversion, and platform-specific runtime boundaries. Meganeura asks whether one compact native compiler can span both phases on consumer GPUs. Its typed static graph, automatic differentiation, optimizer, checkpoint, memory planner, and runtime lower specialized programs through Vulkan and Metal. We compare five matched workloads with PyTorch on NVIDIA and AMD discrete GPUs, an AMD APU, Apple silicon, and an Intel iGPU. The protocol separates strict f32 from validated fast paths and gates forward and backward independently. Forty-eight of 50 device-workload-mode cells pass both gates; the other two share one unresolved backward-reference disagreement on a newly supported APU. In strict f32, Meganeura wins 12 of 20 GPU-referenced minimal-latency cells and has a median valid training gap of 1.8x. On the discrete AMD GPU, four of five inference workloads are within 1.10x of compiled ROCm PyTorch and three training workloads are faster. Under accelerated contracts, the worst training gap is 4.6x. Compilation takes 0.1-2.4 seconds versus 6-96 seconds for torch.compile on supported GPU paths; the stripped binary is 13 MiB. Dispatch profiles localize the largest gaps to convolution derivatives and attention backward. A physical Android XR case study transfers a Meganeura-trained decoder into an Adreno/OpenXR application sharing the graphics queue. The results show that general consumer graphics APIs can support a compact shared train-to-deploy stack at useful, sometimes vendor-competitive performance. The measured gaps point to kernel coverage, scheduling, and arithmetic policy rather than an identified API limitation.

This paper presents the Functional Machine Calculus (FMC) as a simple model of higher-order computation with "reader/writer" effects: higher-order mutable store, input/output, and probabilistic and non-deterministic computation. The FMC derives from the lambda-calculus by taking the standard operational perspective of a call-by-name stack machine as primary, and introducing two natural generalizations. One, "locations", introduces multiple stacks, which each may represent an effect and so enable effect operators to be encoded into the abstraction and application constructs of the calculus. The second, "sequencing", is known from kappa-calculus and concatenative programming languages, and introduces the imperative notions of "skip" and "sequence". This enables the encoding of reduction strategies, including call-by-value lambda-calculus and monadic constructs. The encoding of effects into generalized abstraction and application means that standard results from the lambda-calculus may carry over to effects. The main result is confluence, which is possible because encoded effects reduce algebraically rather than operationally. Reduction generates the familiar algebraic laws for state, and unlike in the monadic setting, reader/writer effects combine seamlessly. A system of simple types confers termination of the machine.

Large Language Models (LLMs) increasingly rely on reinforcement learning with verifiable rewards (RLVR) to elicit reliable chain-of-thought reasoning. However, the training process remains bottlenecked by the computationally expensive rollout stage. Existing acceleration methods-such as parallelization, objective- and data-driven modifications, and replay buffers-either incur diminishing returns, introduce bias, or overlook redundancy across iterations. We identify that rollouts from consecutive training epochs frequently share a large portion of overlapping segments, wasting computation. To address this, we propose SPEC-RL, a novel framework that integrates SPECulative decoding with the RL rollout process. SPEC-RL reuses prior trajectory segments as speculative prefixes and extends them via a draft-and-verify mechanism, avoiding redundant generation while ensuring policy consistency. Experiments on diverse math reasoning and generalization benchmarks, including GSM8K, MATH-500, OlympiadBench, MMLU-STEM, and others, demonstrate that SPEC-RL reduces rollout time by 2-3x without compromising policy quality. As a purely rollout-stage enhancement, SPEC-RL integrates seamlessly with mainstream algorithms (e.g., PPO, GRPO, DAPO), offering a general and practical path to scale RLVR for large reasoning models. Our code is available at https://github.com/ShopeeLLM/Spec-RL

Deploying deep learning models on various devices has become an important topic. The wave of hardware specialization brings a diverse set of acceleration primitives for multi-dimensional tensor computations. These new acceleration primitives, along with the emerging machine learning models, bring tremendous engineering challenges. In this paper, we present TensorIR, a compiler abstraction for optimizing programs with these tensor computation primitives. TensorIR generalizes the loop nest representation used in existing machine learning compilers to bring tensor computation as the first-class citizen. Finally, we build an end-to-end framework on top of our abstraction to automatically optimize deep learning models for given tensor computation primitives. Experimental results show that TensorIR compilation automatically uses the tensor computation primitives for given hardware backends and delivers performance that is competitive to state-of-art hand-optimized systems across platforms.

Long-running LLM agents keep valuable state resident on GPUs: KV caches, request schedulers, communication state, and sometimes online adapters. Losing this state after a GPU or communicator failure can discard minutes to hours of work, yet existing recovery mechanisms either restart the whole serving stack or require application-specific checkpoint logic inside every attention and runtime component. This paper argues that fault tolerance for such workloads needs a GPU-resident execution context: checkpoint hooks must run at device synchronization points, observe binary kernels that frameworks and libraries actually execute, and recover without putting the host CPU on the critical path. We present Concordia, a runtime that uses a device-resident persistent kernel as the substrate for fault-tolerant LLM inference. Concordia interposes on GPU module loading and supports PTX- and SASS-level instrumentation, allowing checkpoint and pause hooks to be inserted below framework code and library boundaries. For each registered LLM state region, Concordia JIT-compiles a specialized delta-checkpoint handler -- for example, a KV-block scanner, adapter-page scanner, or recovery applier -- and hot-swaps it into the persistent kernel's operator table. The persistent kernel consumes a lock-free ring buffer of compute, checkpoint, append-log, and recovery tasks, so the same always-on executor triggers dirty-page detection, stages deltas, and appends committed records to a CPU-visible log in CXL memory or host DRAM.

Recent video diffusion models can synthesize visually compelling clips, yet often violate basic physical laws-objects float, accelerations drift, and collisions behave inconsistently-revealing a persistent gap between visual realism and physical realism. We propose NewtonRewards, the first physics-grounded post-training framework for video generation based on verifiable rewards. Instead of relying on human or VLM feedback, NewtonRewards extracts measurable proxies from generated videos using frozen utility models: optical flow serves as a proxy for velocity, while high-level appearance features serve as a proxy for mass. These proxies enable explicit enforcement of Newtonian structure through two complementary rewards: a Newtonian kinematic constraint enforcing constant-acceleration dynamics, and a mass conservation reward preventing trivial, degenerate solutions. We evaluate NewtonRewards on five Newtonian Motion Primitives (free fall, horizontal/parabolic throw, and ramp sliding down/up) using our newly constructed large-scale benchmark, NewtonBench-60K. Across all primitives in visual and physics metrics, NewtonRewards consistently improves physical plausibility, motion smoothness, and temporal coherence over prior post-training methods. It further maintains strong performance under out-of-distribution shifts in height, speed, and friction. Our results show that physics-grounded verifiable rewards offer a scalable path toward physics-aware video generation.

Recent CUDA exploitation work shows that GPU memory bugs can escalate into device-side control-flow corruption, as kernels later consume corrupted return continuations, function pointers, dispatch-table entries, or branch targets. For deployed CUDA binaries, the relevant security boundary is executed NVIDIA SASS, after PTX lowering, inlining, ABI decisions, register allocation, spills, predication, and SIMT execution; source- or PTX-level policies do not capture this boundary. We present WarpGuard, to our knowledge the first protected-site CFI system for CUDA device binaries operating on executed SASS. WarpGuard enforces at protected sites: recovered SASS instructions or sequences that consume control-flow state, provide sufficient binary evidence to derive policy, are checked before release, and fail closed on violation. It authenticates backward-edge continuation state for instrumented returns, validates recoverable forward targets per site, and reports fixed-edge, unsupported, profile-excluded, fallback, and no-surface outcomes outside the protected denominator. On 77 CUDA artifacts, WarpGuard classifies 51,621 SASS control-flow sites, including 1,343 returns and 154 supported forward target-set entries, and records 52.2 million dynamic checks. In representative backward- and forward-edge corruption attacks, native execution reaches attacker-selected behavior, detect-only mode records the expected violation, and enforcement fails closed before releasing the invalid protected transfer. Public-code evidence shows that the same SASS consumption patterns occur in real CUDA systems, including runtime dispatch tables, cuFFT callbacks, generated callable tables, and uploaded device-function pointers. WarpGuard delivers auditable protected-site CFI for CUDA SASS and separates dynamic-instrumentation enforcement from callback-free SASS timing and patch-cache feasibility.

Coding problems are problems that require a solution in the form of a computer program. Coding problems are popular among students and professionals as it enhances their skills and career opportunities. An AI system that would help those who practice coding problems would be highly useful and there is a huge potential for such a system. In this work, we propose a model which uses stacking of hyperparameter tuned boosting models to achieve impressive metric scores of 77.8% accuracy and 0.815 PR-AUC on the dataset that was scraped from Codeforces and Leetcode. We open source the dataset and the models developed for this work.

A unified simulator that can model diverse physical phenomena without solver-specific redesign is a long-standing goal across simulation science. We present a learning-based particle simulator built on a single transformer architecture to model cloth, elastic solds, Newtonian and non-Newtonian fluids, granular materials, and molecular dynamics. Our model follows a prediction-correction design on a shared Lagrangian particle representation. An explicit predictor first advances particles under the known external forces, producing an intermediate state that captures externally driven motion but not inter-particle interactions. A learned corrector then predicts the residual position and velocity updates through three stages: a particle tokenizer that encodes local particle-particle, particle-boundary, and topology-guided interactions; a super-token encoder that hierarchically merges particle tokens into a compact set of super tokens via alternating self-attention and token merging; and a super-token decoder that lifts these super tokens back to particle resolution through cross-attention to predict per-particle position and velocity corrections. Progressive token merging reduces the attention cost at successive encoder layers by halving the token count at each level, and the decoder communicates through the compact super-token set rather than full particle-to-particle attention. Across the six dynamics categories, the same architecture generalizes to unseen materials, boundary configurations, initial conditions, and external forces. We further demonstrate downstream interactive control, inverse design, and learning from real-world manipulation data, reducing the need for per-phenomenon solver engineering.

Autonomous racing offers a rigorous setting to stress test perception, planning, and control under high speed and uncertainty. This paper proposes an approach to design and evaluate a software stack for an autonomous race car in CARLA: Car Learning to Act simulator, targeting competitive driving performance in the Formula Student UK Driverless (FS-AI) 2025 competition. By utilizing a 360° light detection and ranging (LiDAR), stereo camera, global navigation satellite system (GNSS), and inertial measurement unit (IMU) sensor via ROS 2 (Robot Operating System), the system reliably detects the cones marking the track boundaries at distances of up to 35 m. Optimized trajectories are computed considering vehicle dynamics and simulated environmental factors such as visibility and lighting to navigate the track efficiently. The complete autonomous stack is implemented in ROS 2 and validated extensively in CARLA on a dedicated vehicle (ADS-DV) before being ported to the actual hardware, which includes the Jetson AGX Orin 64GB, ZED2i Stereo Camera, Robosense Helios 16P LiDAR, and CHCNAV Inertial Navigation System (INS).

Large language model (LLM)-powered agents are transforming digital devices from passive tools into proactive intelligent collaborators. However, most existing frameworks remain confined to a single OS or device, making cross-device workflows brittle and largely manual. We present UFO^3, a system that unifies heterogeneous endpoints, desktops, servers, mobile devices, and edge, into a single orchestration fabric. UFO^3 models each user request as a mutable TaskConstellation: a distributed DAG of atomic subtasks (TaskStars) with explicit control and data dependencies (TaskStarLines). The TaskConstellation continuously evolves as results stream in from distributed devices, enabling asynchronous execution, adaptive recovery, and dynamic optimization. A Constellation Orchestrator} executes tasks safely and asynchronously while applying dynamic DAG updates, and the Agent Interaction Protocol (AIP) provides persistent, low-latency channels for reliable task dispatch and result streaming. These designs dissolve the traditional boundaries between devices and platforms, allowing agents to collaborate seamlessly and amplify their collective intelligence. We evaluate UFO^3 on NebulaBench, a benchmark of 55 cross-device tasks across 5 machines and 10 categories. UFO^3 achieves 83.3% subtask completion, 70.9% task success, exposes parallelism with an average width of 1.72, and reduces end-to-end latency by 31% relative to a sequential baseline. Fault-injection experiments demonstrate graceful degradation and recovery under transient and permanent agent failures. These results show that UFO^3 achieves accurate, efficient, and resilient task orchestration across heterogeneous devices, uniting isolated agents into a coherent, adaptive computing fabric that extends across the landscape of ubiquitous computing.

This paper introduces MCTrack, a new 3D multi-object tracking method that achieves state-of-the-art (SOTA) performance across KITTI, nuScenes, and Waymo datasets. Addressing the gap in existing tracking paradigms, which often perform well on specific datasets but lack generalizability, MCTrack offers a unified solution. Additionally, we have standardized the format of perceptual results across various datasets, termed BaseVersion, facilitating researchers in the field of multi-object tracking (MOT) to concentrate on the core algorithmic development without the undue burden of data preprocessing. Finally, recognizing the limitations of current evaluation metrics, we propose a novel set that assesses motion information output, such as velocity and acceleration, crucial for downstream tasks. The source codes of the proposed method are available at this link: https://github.com/megvii-research/MCTrack}{https://github.com/megvii-research/MCTrack

The rapid expansion of capabilities in Large Language Model (LLM) agents has exposed a critical architectural bottleneck: when agents are given access to a flat, monolithic registry of tools, the model must evaluate hundreds or thousands of options simultaneously. This leads to decision-space explosion, context window saturation, and degraded routing accuracy. To address these limitations, this paper presents a hierarchical, skill-based architecture for agentic orchestration. Capabilities are organized as a rooted tree where internal nodes make routing decisions and leaf nodes execute deterministic tasks. The runtime enforces a single-step execution loop governed by a Last-In-First-Out (LIFO) stack, giving the agent a form of memory akin to a Pushdown Automaton, therefore enabling it to track nested execution contexts and resume deterministically from any depth. Capability discovery follows a manifest-driven, lazy-loading protocol: only the immediate children of the active node are loaded, so memory and prompt costs scale with the explored path rather than the global registry. By replacing global memory with localized stack frames, the architecture prevents outputs from one execution branch from leaking into another, establishing the isolation guarantees required for deployment in regulated enterprise environments. We also discuss UPI Help, an AI-powered digital payments support product, as a motivating production deployment context. We provide a mathematical formalization of the orchestration state, detailed algorithmic analysis of the execution loop, and controlled benchmarks comparing flat and hierarchical routing under increasing tool catalogs, multi-step workflow pressure, and visible schema-token exposure per LLM call.

We introduce TurboDiffusion, a video generation acceleration framework that can speed up end-to-end diffusion generation by 100-200x while maintaining video quality. TurboDiffusion mainly relies on several components for acceleration: (1) Attention acceleration: TurboDiffusion uses low-bit SageAttention and trainable Sparse-Linear Attention (SLA) to speed up attention computation. (2) Step distillation: TurboDiffusion adopts rCM for efficient step distillation. (3) W8A8 quantization: TurboDiffusion quantizes model parameters and activations to 8 bits to accelerate linear layers and compress the model. In addition, TurboDiffusion incorporates several other engineering optimizations. We conduct experiments on the Wan2.2-I2V-14B-720P, Wan2.1-T2V-1.3B-480P, Wan2.1-T2V-14B-720P, and Wan2.1-T2V-14B-480P models. Experimental results show that TurboDiffusion achieves 100-200x speedup for video generation even on a single RTX 5090 GPU, while maintaining comparable video quality. The GitHub repository, which includes model checkpoints and easy-to-use code, is available at https://github.com/thu-ml/TurboDiffusion.

As spaceborne computing systems increasingly rely on neural network (NN) accelerators, the opacity of commercial, black-box architectures severely restricts the development of verifiable radiation mitigation strategies. Open-source, register-transfer level (RTL)-accessible accelerators resolve this limitation by enabling user-defined instrumentation, yet few have empirical radiation-response baselines. This work establishes a foundational system-level proton-irradiation baseline for an unmitigated open-source Tensil NN accelerator deployed on a Zynq UltraScale+ SoC executing ResNet-20 inference. Under 20 to 58 MeV proton irradiation, we delivered 4.29 times 10^{10} p/cm^{2} within monitored operational windows. Seven workload interruptions required two restarts of the notebook process, four reboots or board resets, and one power-cycle sequence. Two output-corruption events returned incorrect CIFAR-10 classes without loss of service. In the longer event, the accelerator returned a class absent from the ten-image CIFAR-10 pool for 39 consecutive inputs at normal cadence. The process remained alive, while the kernel log, limited memory test, and sampled power showed no anomaly. Observation of the stuck-class sequence ended with scheduled bitstream reconfiguration. All nine onsets occurred under the nominal 4 cm beam, which exposed the SoC, LPDDR4, and additional board circuitry; none occurred under the 2 cm SoC-centered field. This pattern shows a field association but does not establish LPDDR4 as the cause because field size was confounded with run order and dose. Linux-managed accelerators require end-to-end content checks and recovery that reaches the state in which corruption can persist. This baseline documents availability loss and silent output corruption, supporting future software hardening of COTS FPGA-SoCs for neural-network inference in space systems.

Scientific foundation models hold great promise for advancing nuclear and particle physics by improving analysis precision and accelerating discovery. Yet, progress in this field is often limited by the lack of openly available large scale datasets, as well as standardized evaluation tasks and metrics. Furthermore, the specialized knowledge and software typically required to process particle physics data pose significant barriers to interdisciplinary collaboration with the broader machine learning community. This work introduces a large, openly accessible dataset of 10 million simulated proton-proton collisions, designed to support self-supervised training of foundation models. To facilitate ease of use, the dataset is provided in a common NumPy format. In addition, it includes 70,000 labeled examples spanning three well defined downstream tasks: track finding, particle identification, and noise tagging, to enable systematic evaluation of the foundation model's adaptability. The simulated data are generated using the Pythia Monte Carlo event generator at a center of mass energy of sqrt(s) = 200 GeV and processed with Geant4 to include realistic detector conditions and signal emulation in the sPHENIX Time Projection Chamber at the Relativistic Heavy Ion Collider, located at Brookhaven National Laboratory. This dataset resource establishes a common ground for interdisciplinary research, enabling machine learning scientists and physicists alike to explore scaling behaviors, assess transferability, and accelerate progress toward foundation models in nuclear and high energy physics. The complete simulation and reconstruction chain is reproducible with the sPHENIX software stack. All data and code locations are provided under Data Accessibility.

Tensor Cores have been an important unit to accelerate Fused Matrix Multiplication Accumulation (MMA) in all NVIDIA GPUs since Volta Architecture. To program Tensor Cores, users have to use either legacy wmma APIs or current mma APIs. Legacy wmma APIs are more easy-to-use but can only exploit limited features and power of Tensor Cores. Specifically, wmma APIs support fewer operand shapes and can not leverage the new sparse matrix multiplication feature of the newest Ampere Tensor Cores. However, the performance of current programming interface has not been well explored. Furthermore, the computation numeric behaviors of low-precision floating points (TF32, BF16, and FP16) supported by the newest Ampere Tensor Cores are also mysterious. In this paper, we explore the throughput and latency of current programming APIs. We also intuitively study the numeric behaviors of Tensor Cores MMA and profile the intermediate operations including multiplication, addition of inner product, and accumulation. All codes used in this work can be found in https://github.com/sunlex0717/DissectingTensorCores.

While Flow Matching theoretically guarantees constant-velocity trajectories, we identify a critical breakdown in high-dimensional practice: the Velocity Deficit. We show that the MSE objective systematically underestimates velocity magnitude, causing generated samples to fail to reach the data manifold-a phenomenon we term Integration Lag. To rectify this, we propose Initial Energy Injection, instantiated via two complementary methods: the training-based Magnitude-Aware Flow Matching (MAFM) and the training-free Scale Schedule Corrector (SSC). Both are grounded in our discovery of a crucial asymmetry: velocity contraction causes harmful kinetic stagnation at the trajectory's start, yet acts as a beneficial denoising mechanism at its end. Empirically, SSC yields significant efficiency gains with zero retraining and just one line of code. On ImageNet-1k (256x256), it improves FID by 44.6% (from 13.68 to 7.58) and achieves a 5x speedup, enabling a 50-step generator (FID 7.58) to beat a 250-step baseline (FID 8.65). Furthermore, our methods generalize to Text-to-Image tasks and high-resolution generation, improving FID on MS-COCO by ~22%.

We show evidence of particle acceleration at GEV energies associated directly with protons from the prompt emission of a long-duration M6-class solar flare on July 17, 2023, rather than from protons acceleration by shocks from its associated Coronal Mass Ejection (CME), which erupted with a speed of 1342 km/s. Solar Energetic Particles (SEP) accelerated by the blast have reached Earth, up to an almost S3 (strong) category of a radiation storm on the NOAA scale. Also, we show a temporal correlation between the fast rising of GOES-16 proton and muon excess at ground level in the count rate of the New-Tupi muon detector at the central SAA region. A Monte Carlo spectral analysis based on muon excess at New-Tupi is consistent with the acceleration of electrons and protons (ions) up to relativistic energies (GeV energy range) in the impulsive phase of the flare. In addition, we present another two marginal particle excesses (with low confidence) at ground-level detectors in correlation with the solar flare prompt emission.

Hash tables are ubiquitous. Properties such as an amortized constant time complexity for insertion and querying as well as a compact memory layout make them versatile associative data structures with manifold applications. The rapidly growing amount of data emerging in many fields motivated the need for accelerated hash tables designed for modern parallel architectures. In this work, we exploit the fast memory interface of modern GPUs together with a parallel hashing scheme tailored to improve global memory access patterns, to design WarpCore -- a versatile library of hash table data structures. Unique device-sided operations allow for building high performance data processing pipelines entirely on the GPU. Our implementation achieves up to 1.6 billion inserts and up to 4.3 billion retrievals per second on a single GV100 GPU thereby outperforming the state-of-the-art solutions cuDPP, SlabHash, and NVIDIA RAPIDS cuDF. This performance advantage becomes even more pronounced for high load factors of over 90%. To overcome the memory limitation of a single GPU, we scale our approach over a dense NVLink topology which gives us close-to-optimal weak scaling on DGX servers. We further show how WarpCore can be used for accelerating a real world bioinformatics application (metagenomic classification) with speedups of over two orders-of-magnitude against state-of-the-art CPU-based solutions. WC is written in C++/CUDA-C and is openly available at https://github.com/sleeepyjack/warpcore.

Simulation-based RL for contemporary robot control is increasingly organized around GPU-resident simulation: physics, rollout collection, and learning are placed on a single GPU-centric execution path. This paradigm has greatly improved training speed, but it has also encouraged a default assumption that efficient training requires physics to reside on the GPU. We revisit this assumption. Our view is that, in simulation-dominated robot control, the essential question is not which processor runs physics, but whether simulation throughput, policy learning, and runtime synchronization form an efficient end-to-end loop. We present UniLab, a heterogeneous CPU-simulation / GPU-learning architecture that decouples CPU-parallel simulation from GPU policy updates through a unified runtime for data movement, buffering, and synchronization. UniLab is implemented as a complete and extensible training system using MuJoCoUni and MotrixSim CPU-batched physics backends, supporting PPO, FastSAC, FlashSAC, and APPO. On representative simulation-based robot control tasks, UniLab improves end-to-end training efficiency by 3--10times under the same hardware configuration, while reducing dependence on the NVIDIA CUDA-based software stack and supporting cross-platform execution on the Apple macOS platform and the AMD ROCm and Intel XPU accelerator backends. These results show that GPU simulation is an effective path to efficient training, but not a necessary one, broadening the practical system choices available for robot RL training. Project page: https://unilabsim.github.io.

Existing teleoperation systems are often tailored to specific robot hardware and task domains, limiting their scalability and adaptability. We present ModPack, a modular and extensible teleoperation system designed to support diverse robot embodiments and task requirements within a unified framework. At the core of ModPack is a self-contained wearable "backpack" that integrates onboard computation, power, communication, and data storage. Built on top of this shared interface, the system supports plug-and-play capability modules including joint-level teleoperation with haptic feedback, mobile manipulation, and active perception. Experiments across two distinct robot platforms and real-world mobile manipulation tasks demonstrate that ModPack provides a flexible and reusable framework for data collection and policy learning. To support future research, we open-source the complete hardware design and software stack. Project website: https://modpack-robotics.github.io/

Training large neural networks typically requires sharing gradients between accelerators through specialized high-speed interconnects. Drawing from the signal processing principles of frequency decomposition and energy compaction, we demonstrate that synchronizing full optimizer states and model parameters during training is unnecessary. By decoupling momentum updates and allowing controlled divergence in optimizer states across accelerators, we achieve improved convergence compared to state-of-the-art optimizers. We introduce {De}coupled {Mo}mentum (DeMo), a fused optimizer and data parallel algorithm that reduces inter-accelerator communication requirements by several orders of magnitude. This enables training of large neural networks even with limited network bandwidth and heterogeneous hardware. Our method is topology-agnostic and architecture-independent and supports scalable clock-synchronous distributed training with negligible compute and memory overhead. Empirical results show that models trained with DeMo match or exceed the performance of equivalent models trained with AdamW, while eliminating the need for high-speed interconnects when pre-training large scale foundation models. An open source reference PyTorch implementation is published on GitHub at https://github.com/bloc97/DeMo

Instruction hierarchies are a core safety assumption of language model deployment: higher priority inputs, such as system prompts, should override conflicting lower priority inputs from users or tools. Yet frontier LLMs often violate this hierarchy. We introduce V-Steer, a training-free inference time method that restores privileged influence by editing cached value vectors at prompt positions. Using direct logit attribution on the first next token prediction, V-Steer identifies heads where lower priority spans dominate privileged ones, then boosts privileged spans and suppresses conflicting lower priority spans through in-place multiplicative edits to cached V tensors. Since the method acts only on cached values, it remains compatible with fused attention backends and adds only a one time prefill overhead. Across models from 7B to 70B, this attribution guided intervention raises primary constraint accuracy from under 18% up to 92% on controlled role conflict benchmarks, and on broader instruction hierarchy evaluations substantially outperforms prompt only baselines while matching or exceeding SoTA training based methods on 3 of 4 scales of LLMs, with negligible decoding-speed overhead. The code is available at https://github.com/cindy2000sh/v-steer.

In deep learning, different kinds of deep networks typically need different optimizers, which have to be chosen after multiple trials, making the training process inefficient. To relieve this issue and consistently improve the model training speed across deep networks, we propose the ADAptive Nesterov momentum algorithm, Adan for short. Adan first reformulates the vanilla Nesterov acceleration to develop a new Nesterov momentum estimation (NME) method, which avoids the extra overhead of computing gradient at the extrapolation point. Then Adan adopts NME to estimate the gradient's first- and second-order moments in adaptive gradient algorithms for convergence acceleration. Besides, we prove that Adan finds an epsilon-approximate first-order stationary point within O(epsilon^{-3.5}) stochastic gradient complexity on the non-convex stochastic problems (e.g., deep learning problems), matching the best-known lower bound. Extensive experimental results show that Adan consistently surpasses the corresponding SoTA optimizers on vision, language, and RL tasks and sets new SoTAs for many popular networks and frameworks, e.g., ResNet, ConvNext, ViT, Swin, MAE, DETR, GPT-2, Transformer-XL, and BERT. More surprisingly, Adan can use half of the training cost (epochs) of SoTA optimizers to achieve higher or comparable performance on ViT, GPT-2, MAE, e.t.c., and also shows great tolerance to a large range of minibatch size, e.g., from 1k to 32k. Code is released at https://github.com/sail-sg/Adan, and has been used in multiple popular deep learning frameworks or projects.

We introduce StreamForce, a streaming video generation framework that enables physically grounded control through continuous force inputs. Unlike prior video models that train separate models for different force types, assume fixed forces, or rely on non-causal processing, StreamForce is a causal and unified model that responds instantly and coherently to both local and global, time-varying forces. To achieve this, we design a unified force representation as a control signal and develop a distillation pipeline for force-controllable video generation. Our model combines autoregressive efficiency with force responsiveness, sustaining stable photometric and dynamic realism. StreamForce runs at up to 16.6 FPS on a single GPU, achieving state-of-the-art performance in both force adherence and motion realism. Project website: https://neu-vi.github.io/StreamForce/

Flow matching (FM) has become a popular action head paradigm for modern embodied models. However, as a conditional generative model, it does not explicitly expose its inherent uncertainty, producing faulty action chunks even when it misinterprets the scene or encounters out-of-distribution (OOD) inputs. Therefore, determining when an FM-generated action can be trusted is essential for safe deployment, yet existing uncertainty estimation methods on real-time control suffer from several issues: extra training budget, high computational overhead, and low generalization ability. In this work, we provide a geometric interpretation of FM uncertainty in the velocity field, showing that uncertainty manifests as deviation from an ideal affine-isotropic contraction field. Building on this observation, we introduce denoising acceleration (accel), a highly-generalizable and cost-free uncertainty proxy that measures the bending of the denoising trajectory from a single forward pass, without additional model evaluations, training, or resampling. We theoretically and empirically demonstrate that accel is a faithful proxy for FM uncertainty and further test its utility in online failure detection. Results show that accel identifies failing rollouts well before termination, matching or even outperforming costly resampling- and training-based baselines across settings under realistic deployment budget. Code and demos available at: https://github.com/rrrrrrzy/fm-geometry.

As a famous landmark and feat of engineering, the Gateway Arch was a popular destination at the 2025 AAPT Winter Meeting in St. Louis. The visit to the observation deck of the Gateway Arch is unique, climbing the steps after exiting the small tram capsules and seeing a floor that continues to slope upward assures that you are in fact at the very top. Everyone in our group excitedly took pictures, pointing out local features like the Dred Scott Courthouse. There were many selfies at the pinnacle, and we discussed how to work them into future questions for our students. During our tram ride to the top observation deck of the arch, we lamented that we should have brought pendula to measure the acceleration due to gravity. You can take physics teachers out of the physics conference, but you apparently can't get us to stop talking about physics teaching. Recognizing that we had accelerometers on our phones we collected data on the descent. The authors wanted to collect more complete measurements and returned two days later to repeat the journey, the results of which we present here. For readers wishing to repeat with their students, or who want to apply more advanced data analysis techniques, the authors have made the raw data, our spreadsheets, and a teacher's guide available.

Dynamic 3D interaction has been attracting a lot of attention recently. However, creating such 4D content remains challenging. One solution is to animate 3D scenes with physics-based simulation, which requires manually assigning precise physical properties to the object or the simulated results would become unnatural. Another solution is to learn the deformation of 3D objects with the distillation of video generative models, which, however, tends to produce 3D videos with small and discontinuous motions due to the inappropriate extraction and application of physics priors. In this work, to combine the strengths and complementing shortcomings of the above two solutions, we propose to learn the physical properties of a material field with video diffusion priors, and then utilize a physics-based Material-Point-Method (MPM) simulator to generate 4D content with realistic motions. In particular, we propose motion distillation sampling to emphasize video motion information during distillation. In addition, to facilitate the optimization, we further propose a KAN-based material field with frame boosting. Experimental results demonstrate that our method enjoys more realistic motions than state-of-the-arts do.

Small-model agentic post-training is bottlenecked less by the algorithm than by the trajectory substrate it consumes. Leading recipes (RLVR, group-relative RL, rejection-sampled re-SFT) all need multi-turn traces carrying per-trajectory supervision, and the two existing sources fall short: frontier-synthesised data inherits the synthesizer's biases and collapses the long tail, while unfiltered production logs are unjudged and contaminated by shortcut behaviour. We argue that an incentive-aligned agent arena can be engineered to manufacture such trajectories, and demonstrate this on ORO Subnet 15 (SN15), a Bittensor deployment of the ShoppingBench agentic-commerce benchmark. SN15's race mechanism, LLM reasoning judge, and rotating leak-cluster-guarded problem suite yield a corpus with three properties: incentive-aligned diversity, per-trajectory judging, and anti-memorised held-out evaluation. We introduce a structural-quality filter that converts the raw firehose into a trainable corpus by keeping agentic trajectories (the model itself emits the tool calls) and rejecting sub-task trajectories (the model only classifies or narrates over a deterministic search loop), then post-train Qwen3-4B with a recipe matched to the published ShoppingBench SFT-then-GRPO pipeline. On a leak-cluster-guarded held-out partition scored production-strict, the model lifts from the published Qwen3-4B base of 18.0% ASR to 42.7%, within single-problem noise of the synthetic-data SFT-only baseline (43.6%), while training on a fraction of a single day of subnet output. The supervised stack leaves a large pass@8 to pass@1 gap (53.3% vs 34.8%); a per-step teacher-grounded Dr. GRPO reward converts that headroom into process improvement, and we identify the sub-task firehose as the primary lever for closing the gap to the 48.7% SFT+GRPO bar. We release the filter, the corpus splits, and the arena mechanics.

Local stochastic gradient descent (Local-SGD), also referred to as federated averaging, is an approach to distributed optimization where each device performs more than one SGD update per communication. This work presents an empirical study of {\it asynchronous} Local-SGD for training language models; that is, each worker updates the global parameters as soon as it has finished its SGD steps. We conduct a comprehensive investigation by examining how worker hardware heterogeneity, model size, number of workers, and optimizer could impact the learning performance. We find that with naive implementations, asynchronous Local-SGD takes more iterations to converge than its synchronous counterpart despite updating the (global) model parameters more frequently. We identify momentum acceleration on the global parameters when worker gradients are stale as a key challenge. We propose a novel method that utilizes a delayed Nesterov momentum update and adjusts the workers' local training steps based on their computation speed. This approach, evaluated with models up to 150M parameters on the C4 dataset, matches the performance of synchronous Local-SGD in terms of perplexity per update step, and significantly surpasses it in terms of wall clock time.

We study the design decisions of publicly available instruction tuning methods, and break down the development of Flan 2022 (Chung et al., 2022). Through careful ablation studies on the Flan Collection of tasks and methods, we tease apart the effect of design decisions which enable Flan-T5 to outperform prior work by 3-17%+ across evaluation settings. We find task balancing and enrichment techniques are overlooked but critical to effective instruction tuning, and in particular, training with mixed prompt settings (zero-shot, few-shot, and chain-of-thought) actually yields stronger (2%+) performance in all settings. In further experiments, we show Flan-T5 requires less finetuning to converge higher and faster than T5 on single downstream tasks, motivating instruction-tuned models as more computationally-efficient starting checkpoints for new tasks. Finally, to accelerate research on instruction tuning, we make the Flan 2022 collection of datasets, templates, and methods publicly available at https://github.com/google-research/FLAN/tree/main/flan/v2.

Despite the huge success of Large Language Models (LLMs) in coding assistants like GitHub Copilot, these models struggle to understand the context present in the repository (e.g., imports, parent classes, files with similar names, etc.), thereby producing inaccurate code completions. This effect is more pronounced when using these assistants for repositories that the model has not seen during training, such as proprietary software or work-in-progress code projects. Recent work has shown the promise of using context from the repository during inference. In this work, we extend this idea and propose RepoFusion, a framework to train models to incorporate relevant repository context. Experiments on single-line code completion show that our models trained with repository context significantly outperform much larger code models as CodeGen-16B-multi (sim73times larger) and closely match the performance of the sim 70times larger StarCoderBase model that was trained with the Fill-in-the-Middle objective. We find these results to be a novel and compelling demonstration of the gains that training with repository context can bring. We carry out extensive ablation studies to investigate the impact of design choices such as context type, number of contexts, context length, and initialization within our framework. Lastly, we release Stack-Repo, a dataset of 200 Java repositories with permissive licenses and near-deduplicated files that are augmented with three types of repository contexts. Additionally, we are making available the code and trained checkpoints for our work. Our released resources can be found at https://huggingface.co/RepoFusion.

Graphics processing units (GPUs) are continually evolving to cater to the computational demands of contemporary general-purpose workloads, particularly those driven by artificial intelligence (AI) utilizing deep learning techniques. A substantial body of studies have been dedicated to dissecting the microarchitectural metrics characterizing diverse GPU generations, which helps researchers understand the hardware details and leverage them to optimize the GPU programs. However, the latest Hopper GPUs present a set of novel attributes, including new tensor cores supporting FP8, DPX, and distributed shared memory. Their details still remain mysterious in terms of performance and operational characteristics. In this research, we propose an extensive benchmarking study focused on the Hopper GPU. The objective is to unveil its microarchitectural intricacies through an examination of the new instruction-set architecture (ISA) of Nvidia GPUs and the utilization of new CUDA APIs. Our approach involves two main aspects. Firstly, we conduct conventional latency and throughput comparison benchmarks across the three most recent GPU architectures, namely Hopper, Ada, and Ampere. Secondly, we delve into a comprehensive discussion and benchmarking of the latest Hopper features, encompassing the Hopper DPX dynamic programming (DP) instruction set, distributed shared memory, and the availability of FP8 tensor cores. The microbenchmarking results we present offer a deeper understanding of the novel GPU AI function units and programming features introduced by the Hopper architecture. This newfound understanding is expected to greatly facilitate software optimization and modeling efforts for GPU architectures. To the best of our knowledge, this study makes the first attempt to demystify the tensor core performance and programming instruction sets unique to Hopper GPUs.

This paper introduces HiFloat4 (HiF4), a block floating-point data format tailored for deep learning. Each HiF4 unit packs 64 4-bit elements with 32 bits of shared scaling metadata, averaging 4.5 bits per value. The metadata specifies a three-level scaling hierarchy, capturing inter- and intra-group dynamic range while improving the utilization of the representational space. In addition, the large 64-element group size enables matrix multiplications to be executed in a highly fixed-point manner, significantly reducing hardware area and power consumption. To evaluate the proposed format, we conducted inference experiments on several language models, including LLaMA, Qwen, Mistral, DeepSeek-V3.1 and LongCat. Results show that HiF4 achieves higher average accuracy than the state-of-the-art NVFP4 format across multiple models and diverse downstream tasks.

Current robots are either expensive or make significant compromises on sensory richness, computational power, and communication capabilities. We propose to leverage smartphones to equip robots with extensive sensor suites, powerful computational abilities, state-of-the-art communication channels, and access to a thriving software ecosystem. We design a small electric vehicle that costs $50 and serves as a robot body for standard Android smartphones. We develop a software stack that allows smartphones to use this body for mobile operation and demonstrate that the system is sufficiently powerful to support advanced robotics workloads such as person following and real-time autonomous navigation in unstructured environments. Controlled experiments demonstrate that the presented approach is robust across different smartphones and robot bodies. A video of our work is available at https://www.youtube.com/watch?v=qc8hFLyWDOM

We introduce Shepherd, a functional programming model that formalizes meta-agent operations on target agents as functions, with core operations mechanized in Lean. Shepherd records every agent-environment interaction as a typed event in a Git-like execution trace, enabling any past state to be forked and replayed. The system forks the agent process and its filesystem 5times faster than Docker, achieving >95% prompt-cache reuse on replay. We demonstrate the model through three applications. First, in runtime intervention, a live supervisor increases pair coding pass rates from 28.8% to 54.7% on CooperBench. Second, in counterfactual meta-optimization, branching exploration outperforms baselines across four benchmarks by up to 11 points while reducing wall-clock time by up to 58%. Third, in Tree-RL training, forking rollouts at selected turns improves TerminalBench-2 performance from 34.2% to 39.4%. These results establish Shepherd as an efficient infrastructure for programming meta-agents. We open-source the system to support future research.

In the rapidly advancing field of artificial intelligence, software development has emerged as a key area of innovation. Despite the plethora of general-purpose AI assistants available, their effectiveness diminishes in complex, domain-specific scenarios. Noting this limitation, both the academic community and industry players are relying on contextualized coding AI assistants. These assistants surpass general-purpose AI tools by integrating proprietary, domain-specific knowledge, offering precise and relevant solutions. Our study focuses on the initial experiences of 62 participants who used a contextualized coding AI assistant -- named StackSpot AI -- in a controlled setting. According to the participants, the assistants' use resulted in significant time savings, easier access to documentation, and the generation of accurate codes for internal APIs. However, challenges associated with the knowledge sources necessary to make the coding assistant access more contextual information as well as variable responses and limitations in handling complex codes were observed. The study's findings, detailing both the benefits and challenges of contextualized AI assistants, underscore their potential to revolutionize software development practices, while also highlighting areas for further refinement.