Get trending papers in your email inbox once a day!
Get trending papers in your email inbox!
SubscribeAsymptotic stability of the 2D Boussinesq equations around Couette flow in infinite channel
In this paper, we investigate the stability threshold of the two-dimensional Boussinesq system around the Couette flow in an infinite channel Rtimes[-1,1] under Navier-slip boundary condition. To address nonlinear echo chains induced by temperature-vorticity coupling, we construct a two-level frequency-dependent temporal decomposition, with the two levels matched to the infinite and finite superposition principles for the equation, respectively. By fully exploiting the enhanced dissipation effect at each decomposition level, we prove that if the initial perturbation (ω^{in}, θ^{in}) around the Couette flow satisfies |ω^{in}|_{H^4_{x,y}cap L^1_xH^4_y}leq cν^{1{3}}, and |θ^{in}|_{H^5_{x,y}cap L^1_xH^5_y}leq cν^{2{3}+}, the Boussinesq system admits a globally asymptotically stable solution. It should be emphasized that the method in this paper provides an effective approach for the hydrodynamic equations with coupling effects.
A projection based Variational Multiscale Method for Atmosphere-Ocean Interaction
The proposed method aims to approximate a solution of a fluid-fluid interaction problem in case of low viscosities. The nonlinear interface condition on the joint boundary allows for this problem to be viewed as a simplified version of the atmosphere-ocean coupling. Thus, the proposed method should be viewed as potentially applicable to air-sea coupled flows in turbulent regime. The method consists of two key ingredients. The geometric averaging approach is used for efficient and stable decoupling of the problem, which would allow for the usage of preexisting codes for the air and sea domain separately, as "black boxes". This is combined with the variational multiscale stabilization technique for treating flows at high Reynolds numbers. We prove the stability and accuracy of the method and provide several numerical tests to assess both the quantitative and qualitative features of the computed solution.
Lagrangian basis method for dimensionality reduction of convection dominated nonlinear flows
Foundations of a new projection-based model reduction approach for convection dominated nonlinear fluid flows are summarized. In this method the evolution of the flow is approximated in the Lagrangian frame of reference. Global basis functions are used to approximate both the state and the position of the Lagrangian computational domain. It is demonstrated that in this framework, certain wave-like solutions exhibit low-rank structure and thus, can be efficiently compressed using relatively few global basis. The proposed approach is successfully demonstrated for the reduction of several simple but representative problems.
Meshfree Methods on Manifolds for Hydrodynamic Flows on Curved Surfaces: A Generalized Moving Least-Squares (GMLS) Approach
We utilize generalized moving least squares (GMLS) to develop meshfree techniques for discretizing hydrodynamic flow problems on manifolds. We use exterior calculus to formulate incompressible hydrodynamic equations in the Stokesian regime and handle the divergence-free constraints via a generalized vector potential. This provides less coordinate-centric descriptions and enables the development of efficient numerical methods and splitting schemes for the fourth-order governing equations in terms of a system of second-order elliptic operators. Using a Hodge decomposition, we develop methods for manifolds having spherical topology. We show the methods exhibit high-order convergence rates for solving hydrodynamic flows on curved surfaces. The methods also provide general high-order approximations for the metric, curvature, and other geometric quantities of the manifold and associated exterior calculus operators. The approaches also can be utilized to develop high-order solvers for other scalar-valued and vector-valued problems on manifolds.
Matrix structure and convergence behavior of the matched eigenfunction method for computing heave wave forces on generalized concentric bodies
Structural survival of offshore structures is crucial for the growing marine economy. Calculating the added mass, radiation damping, and excitation coefficients to quantify wave loads with the traditional boundary element method (BEM) presents a computational bottleneck. The matched eigenfunction expansion method (MEEM), a long-known but rarely-used alternative, offers computational benefits due to its semi-analytical nature. However, previous work fails to directly compare its accuracy and computational performance with BEM, leaving the extent of its utility unknown. Furthermore, the geometry-dependent convergence for cylindrical and slanted geometries has not yet been documented, making the method's practicality for general geometries unclear. This paper presents a unifying MEEM framework for modeling an arbitrary number of fixed or heaving surface-piercing annular cylinders with continuous and radially-monotonic body profiles, and explores the method's block matrix structure, convergence behavior, ability to accurately approximate slanted geometries, and computational advantages over the BEM solver Capytaine. The numerical experiments show that MEEM can compute hydrodynamic coefficients of slanted geometries within 5% of Capytaine, even for angles as steep as 15 degrees from vertical. Finally, MEEM can achieve 2% convergence of its hydrodynamic coefficients an order of magnitude faster than Capytaine with a matrix size two orders of magnitude smaller, making it a computationally effective alternative to traditional BEM solvers. These contributions enable hydrodynamic analysis of a broad range of shapes with increased speed and confidence, paving the way for future optimization studies to yield improved designs.
Solving Navier-Stokes Equations Using Data-free Physics-Informed Neural Networks With Hard Boundary Conditions
In recent years, Physics-Informed Neural Networks (PINNs) have emerged as a powerful and robust framework for solving nonlinear differential equations across a wide range of scientific and engineering disciplines, including biology, geophysics, astrophysics and fluid dynamics. In the PINN framework, the governing partial differential equations, along with initial and boundary conditions, are encoded directly into the loss function, enabling the network to learn solutions that are consistent with the underlying physics. In this work, we employ the PINN framework to solve the dimensionless Navier-Stokes equations for three two-dimensional incompressible, steady, laminar flow problems without using any labeled data. The boundary and initial conditions are enforced in a hard manner, ensuring they are satisfied exactly rather than penalized during training. We validate the PINN predicted velocity profiles, drag coefficients and pressure profiles against the conventional computational fluid dynamics (CFD) simulations for moderate to high values of Reynolds number (Re). It is observed that the PINN predictions show good agreement with the CFD results at lower Re. We also extend our analysis to a transient condition and find that our method is equally capable of simulating complex time-dependent flow dynamics. To quantitatively assess the accuracy, we compute the L_2 normalized error, which lies in the range O(10^{-4}) - O(10^{-1}) for our chosen case studies.
Capturing multiscale interactions in fluid flow via Lagrangian coherent structures and modal analysis
We consider the relationship between Eulerian modal decompositions and Lagrangian coherent structures (LCSs). The model sensitivity framework developed by Kaszás and Haller (2020) is used to express data-driven modal representations of fluid flow in a Lagrangian space. The method, based on the computation of the finite-time Lyapunov exponent, computes the amplitude perturbations experienced by fluid particles due to specific modal components of the flow. Demonstrations of the method are presented for both periodic and turbulent flows, including experimental data from the wake past an oscillating foil, numerical data of the classical cylinder wake flow, and a direct numerical simulation (DNS) of a turbulent channel flow. This method provides a way to understand how Eulerian mode structures interact dynamically with features of the Lagrangian coherent structure across scales, offering additional physical insight into modal decompositions.
Lagrangian Flow Networks for Conservation Laws
We introduce Lagrangian Flow Networks (LFlows) for modeling fluid densities and velocities continuously in space and time. By construction, the proposed LFlows satisfy the continuity equation, a PDE describing mass conservation in its differentiable form. Our model is based on the insight that solutions to the continuity equation can be expressed as time-dependent density transformations via differentiable and invertible maps. This follows from classical theory of the existence and uniqueness of Lagrangian flows for smooth vector fields. Hence, we model fluid densities by transforming a base density with parameterized diffeomorphisms conditioned on time. The key benefit compared to methods relying on numerical ODE solvers or PINNs is that the analytic expression of the velocity is always consistent with changes in density. Furthermore, we require neither expensive numerical solvers, nor additional penalties to enforce the PDE. LFlows show higher predictive accuracy in density modeling tasks compared to competing models in 2D and 3D, while being computationally efficient. As a real-world application, we model bird migration based on sparse weather radar measurements.
Interactive 4D Volumetric Liquid Forecasting under Moving-Solid Interaction
We propose the task of Interactive 4D Volumetric Liquid Forecasting: predicting the spatiotemporal evolution of a future dense 3D liquid velocity field conditioned on how a solid object moves through it. This task provides an upstream physical forecasting primitive for systems that need to reason about motion-conditioned liquid response, including robotic liquid manipulation, digital twins, and rigid-fluid video generation. Existing works have made efforts in predicting flow around static or prescribed solid geometries and synthesizing visually plausible fluid motion. Yet these approaches provide limited coverage for interactive liquid dynamics, as they are not capable of forecasting how a moving solid induces a future full-domain liquid response. In this forecasting scenario, the hydrodynamic effect is condensed near an evolving liquid-solid interface, but the prediction target is a global spatiotemporal rollout. To address this challenge, we propose a two-level recurrent forecasting framework, TIDE/TIDES: TIDE isolates localized interface-driven forecasting, while TIDES adds transport-aware coupling and explicit stabilization to reduce accumulated rollout error. Across adapted neighboring baselines, controlled component ablations, motion/size OOD tests, and long-horizon evaluation, TIDES achieves the best forecasting performance and the ablations identify localized interaction, transport coupling, and stabilization as the key contributors. Together, our task formulation, benchmark, and TIDE/TIDES study establish a controlled foundation for moving-solid-conditioned dense liquid forecasting. The code is publicly available at https://github.com/jongwonryu/TIDE-TIDES.
Scalar field theory for (chiral) active Brownian particles: bottom-up derivation revisited
The active Brownian particle (ABP) model is one of the most widely used particle-based models in studies of scalar active fluids. A collection of interacting ABPs is known to exhibit intriguing phenomena that are absent in equilibrium counterparts. A prominent example is spontaneous phase separation, known as motility-induced phase separation (MIPS), which occurs even in the absence of explicit attractive interactions. In parallel, the large-scale behavior of scalar active fluids is often modeled using continuum descriptions, namely, scalar field theories. Such scalar active field theories are usually formulated in a top-down manner, and establishing their connections to particle-based models remains challenging, with these connections not yet fully understood. To advance the microscopic derivation of scalar active field theories, we revisit the connection between ABPs interacting via a two-body potential in two dimensions and scalar field theories that include all possible terms up to fourth order in spatial gradients. Our approach is based on a pressure expansion and the renormalization group (RG) method in the context of singular perturbation theory. The RG method provides a systematic way to eliminate fast variables and identify the dynamics on the slow invariant manifold. Within this framework, scalar field theories can be obtained as RG flow equations. We also apply this method to a chiral variant of the ABP model, the chiral ABP (cABP) model, in which a constant torque biases particle rotation to the left or right. We show that the scalar field theory corresponding to the cABP model contains two ``odd'' terms in addition to those present in the scalar field theory for ABPs. The method developed here may also be useful for deriving hydrodynamic descriptions of other types of active matter systems.
A Neural Surrogate Approach for Simulating Natural Convection Problems
This paper presents a neural surrogate approach for improving the accuracy of natural convection problems simulated with a Boussinesq flow model (incompressible flow with heat transfer). Our approach, based on Fourier neural operators, uses training data consisting of matched pairs of simulations run under the computationally cheaper yet less accurate Boussinesq flow model and a more computationally expensive and more accurate compressible flow model. In both cases, we implement our parallelized simulation codes based on an implicit monolithic mixed finite element method (FEM) approach using the open-source FEniCSx framework. Our implementations are validated against a commercial software package, COMSOL, as well as standard test problems from the literature. We include a careful discussion and analysis of data set generation and present learning results in two and three spatial dimensions. Using compressible flow results as high-fidelity reference solutions, our learning approach, with a single model evaluation per simulation, substantially improves the per-channel accuracy of Boussinesq predictions, with structural similarity (SSIM) close to unity across all flow variables and test distributions and corresponding mean-squared error reductions of one to nearly three orders of magnitude. All code and data is released as open-source.
A New Approach for Constraining Large-Scale Temperature Fluctuations in the Intergalactic Medium
The reionization of helium is thought to occur at 2.5lesssim zlesssim4, marking the last phase transition and final global heating event of the intergalactic medium (IGM). Since it is driven by rare quasars, helium reionization should give rise to strong temperature fluctuations in the IGM between neutral and recently-ionized regions of order sigma (ln T) sim Delta T/T = 20-50%. We introduce a novel method to search for reionization-induced temperature fluctuations in the IGM by using the effective optical depths of the Lyman-alpha forest towards a large number of background quasars. Higher IGM temperatures give rise to lower effective optical depths in the Lyman-alpha forest, implying that temperature fluctuations will broaden the observed optical depth distribution. We measured the distributions of effective Lyman-alpha forest optical depths across 71 X-Shooter spectra from the XQ-100 survey in four redshift bins from z=3.76 to z=4.19 and compared them to a large-volume cosmological hydrodynamical simulation. A good agreement is found between the observations and the simulation, which does not include temperature fluctuations; therefore, we do not detect a signature of helium reionization. We then post-process the simulations to include an increasing amount of temperature fluctuations until the model becomes inconsistent with the observations. We obtain tight constraints on sigma (ln T) < 0.29 (<0.40) at 2 sigma (3 sigma) at z=3.76 when averaging over scales of 100 comoving Mpc, and weaker constraints for higher redshifts and smaller scales. Our constraints are the tightest to date, and imply that either the IGM temperature contrast caused by helium reionization is less than sim30%, or that the process has not yet significantly started at z=3.76.
A Variational Optimal Transport Operator on Incompressible Flow
We present the Variational Incompressible Optimal Transport (VIOT) operator, a generative neural operator for amortized incompressible density transport. Given a new source-target density pair, VIOT predicts a divergence-free velocity field and generates the full transport trajectory by feed-forward inference, replacing the hour-scale per-pair optimization used by adjoint fluid solvers and differentiable simulation baselines. The system consists of three components: a stream-function or vector-potential representation that enforces incompressibility by construction, a regularized incompressible transport objective that balances endpoint accuracy and flow smoothness, and a Fourier Neural Operator backbone that amortizes the solve across new pairs and grid resolutions. Together, these components make incompressible transport a reusable neural operator that facilitates various transport processes. Further, the generative capability extends beyond the training distribution, with VIOT producing incompressible transports for user-drawn source-target pairs in a real-time interactive system. We demonstrate VIOT on 2D and 3D density-transport benchmarks. Both 2D and 3D rollouts complete in seconds per pair, while per-instance baselines in our 2D comparisons optimize each new pair from scratch and require on the order of an hour, a roughly 10^4times online speedup.
Global solutions to the two-dimensional compressible MHD equations with density-dependent bulk viscosity
We study the two-dimensional periodic resistive compressible magnetohydrodynamic equations with constant shear viscosity and magnetic diffusivity, bulk viscosity ρ^β, and pressure ρ^γ. For every β>1 and γ>1, we construct global finite-energy renormalized weak solutions from strictly positive bounded W^{1,q} densities, q>2, and arbitrary H^1 velocity and magnetic data. The construction combines approximation-independent finite density moments, generalized effective-flux identities, and a joint logarithmic renormalization of the density and its entropy defect. An augmented relative energy containing the β-power density potential yields weak--strong uniqueness against positive H^2 strong solutions for the same full pressure range. We also establish global strong existence for a large-background family when γ>max{5-2β,β+1}. Writing m=intρ_0, the density perturbation is bounded in the scaled norm m^{(γ-3)/2}|ρ_0-m|_{H^2}, while the fixed H^2 velocity and magnetic norms need not be small. For sufficiently large m, frequency-dependent acoustic dissipation, staged vorticity weights, and a separate initial-layer flux estimate close a simultaneous bootstrap. The admissible pressure exponents have infimum 7/3, with the endpoint excluded. For β>2 the relevant damping rate is the minimum of the viscous and pressure-relaxation rates; keeping both rates extends the argument without an upper restriction on β. The strong theorem has no upper restriction on γ under this scaled density hypothesis; for fixed additive density perturbations it applies in the stated lower range up to γ=3.
Floating-Body Hydrodynamic Neural Networks
Fluid-structure interaction is common in engineering and natural systems, where floating-body motion is governed by added mass, drag, and background flows. Modeling these dissipative dynamics is difficult: black-box neural models regress state derivatives with limited interpretability and unstable long-horizon predictions. We propose Floating-Body Hydrodynamic Neural Networks (FHNN), a physics-structured framework that predicts interpretable hydrodynamic parameters such as directional added masses, drag coefficients, and a streamfunction-based flow, and couples them with analytic equations of motion. This design constrains the hypothesis space, enhances interpretability, and stabilizes integration. On synthetic vortex datasets, FHNN achieves up to an order-of-magnitude lower error than Neural ODEs, recovers physically consistent flow fields. Compared with Hamiltonian and Lagrangian neural networks, FHNN more effectively handles dissipative dynamics while preserving interpretability, which bridges the gap between black-box learning and transparent system identification.
Excitation of non-modal perturbations in hypersonic boundary layers by free stream forcing. Part III: effects of wall temperature and nose bluntness
This paper constitutes Part III of a series investigating the excitation of non-modal perturbations in hypersonic blunt-nose boundary layers. Based on the numerical shock-fitting harmonic linearised Navier-Stokes (SF-HLNS) approach presented in Part I (Zhao & Dong, J. Fluid Mech. 2025, vol. 1013: A44) and the asymptotic analysis developed in Part II (Dong et al., J. Fluid Mech., under review), the present work focuses specifically on the influence of nose bluntness (Reynolds number R) and wall temperature T_w on receptivity efficiency through seven detailed case studies. Analysed via the three-step asymptotic model, the downstream perturbation amplitude is governed by two distinct factors: the stagnation vorticity perturbation, determined through shock-perturbation interaction and the slow-down convection mechanism, and the parabolic evolution of non-modal perturbations driven by the lift-up mechanism. Increasing R strongly amplifies the stagnation vorticity response, with only mild enhancement of the lift-up effect. In contrast, decreasing T_w strengthens the stagnation vorticity perturbation, but slightly weakens the lift-up effect; the net result is an overall intensification of the downstream perturbation amplitude with decreasing T_w. Furthermore, explicit scaling laws for receptivity efficiency with respect to R and T_w are established. This study completes the theoretical foundation for non-modal receptivity in hypersonic blunt boundary layers, and serves as a key step toward a physics-based transition prediction framework.
FD-Bench: A Modular and Fair Benchmark for Data-driven Fluid Simulation
Data-driven modeling of fluid dynamics has advanced rapidly with neural PDE solvers, yet a fair and strong benchmark remains fragmented due to the absence of unified PDE datasets and standardized evaluation protocols. Although architectural innovations are abundant, fair assessment is further impeded by the lack of clear disentanglement between spatial, temporal and loss modules. In this paper, we introduce FD-Bench, the first fair, modular, comprehensive and reproducible benchmark for data-driven fluid simulation. FD-Bench systematically evaluates 85 baseline models across 10 representative flow scenarios under a unified experimental setup. It provides four key contributions: (1) a modular design enabling fair comparisons across spatial, temporal, and loss function modules; (2) the first systematic framework for direct comparison with traditional numerical solvers; (3) fine-grained generalization analysis across resolutions, initial conditions, and temporal windows; and (4) a user-friendly, extensible codebase to support future research. Through rigorous empirical studies, FD-Bench establishes the most comprehensive leaderboard to date, resolving long-standing issues in reproducibility and comparability, and laying a foundation for robust evaluation of future data-driven fluid models. The code is open-sourced at https://anonymous.4open.science/r/FD-Bench-15BC.
Towards Universal Mesh Movement Networks
Solving complex Partial Differential Equations (PDEs) accurately and efficiently is an essential and challenging problem in all scientific and engineering disciplines. Mesh movement methods provide the capability to improve the accuracy of the numerical solution without increasing the overall mesh degree of freedom count. Conventional sophisticated mesh movement methods are extremely expensive and struggle to handle scenarios with complex boundary geometries. However, existing learning-based methods require re-training from scratch given a different PDE type or boundary geometry, which limits their applicability, and also often suffer from robustness issues in the form of inverted elements. In this paper, we introduce the Universal Mesh Movement Network (UM2N), which -- once trained -- can be applied in a non-intrusive, zero-shot manner to move meshes with different size distributions and structures, for solvers applicable to different PDE types and boundary geometries. UM2N consists of a Graph Transformer (GT) encoder for extracting features and a Graph Attention Network (GAT) based decoder for moving the mesh. We evaluate our method on advection and Navier-Stokes based examples, as well as a real-world tsunami simulation case. Our method outperforms existing learning-based mesh movement methods in terms of the benchmarks described above. In comparison to the conventional sophisticated Monge-Amp\`ere PDE-solver based method, our approach not only significantly accelerates mesh movement, but also proves effective in scenarios where the conventional method fails. Our project page is at https://erizmr.github.io/UM2N/.
Learning to correct spectral methods for simulating turbulent flows
Despite their ubiquity throughout science and engineering, only a handful of partial differential equations (PDEs) have analytical, or closed-form solutions. This motivates a vast amount of classical work on numerical simulation of PDEs and more recently, a whirlwind of research into data-driven techniques leveraging machine learning (ML). A recent line of work indicates that a hybrid of classical numerical techniques and machine learning can offer significant improvements over either approach alone. In this work, we show that the choice of the numerical scheme is crucial when incorporating physics-based priors. We build upon Fourier-based spectral methods, which are known to be more efficient than other numerical schemes for simulating PDEs with smooth and periodic solutions. Specifically, we develop ML-augmented spectral solvers for three common PDEs of fluid dynamics. Our models are more accurate (2-4x) than standard spectral solvers at the same resolution but have longer overall runtimes (~2x), due to the additional runtime cost of the neural network component. We also demonstrate a handful of key design principles for combining machine learning and numerical methods for solving PDEs.
Hard core run and tumble particles on a one dimensional lattice
We study the large scale behavior of a collection of hard core run and tumble particles on a one dimensional lattice with periodic boundary conditions. Each particle has persistent motion in one direction decided by an associated spin variable until the direction of spin is reversed. We map the run and tumble model to a mass transfer model with fluctuating directed bonds. We calculate the steady state single site mass distribution in the mass model within a mean field approximation for larger spin-flip rates and by analyzing an appropriate coalescence fragmentation model for small spin-flip rates. We also calculate the hydrodynamic coefficients of diffusivity and conductivity for both large and small spin-flip rates and show that the Einstein relation is violated in both regimes. We also show how the non-gradient nature of the process can be taken into account in a systematic manner to calculate the hydrodynamic coefficients.
PROSE-FD: A Multimodal PDE Foundation Model for Learning Multiple Operators for Forecasting Fluid Dynamics
We propose PROSE-FD, a zero-shot multimodal PDE foundational model for simultaneous prediction of heterogeneous two-dimensional physical systems related to distinct fluid dynamics settings. These systems include shallow water equations and the Navier-Stokes equations with incompressible and compressible flow, regular and complex geometries, and different buoyancy settings. This work presents a new transformer-based multi-operator learning approach that fuses symbolic information to perform operator-based data prediction, i.e. non-autoregressive. By incorporating multiple modalities in the inputs, the PDE foundation model builds in a pathway for including mathematical descriptions of the physical behavior. We pre-train our foundation model on 6 parametric families of equations collected from 13 datasets, including over 60K trajectories. Our model outperforms popular operator learning, computer vision, and multi-physics models, in benchmark forward prediction tasks. We test our architecture choices with ablation studies.
Generalization techniques of neural networks for fluid flow estimation
We demonstrate several techniques to encourage practical uses of neural networks for fluid flow estimation. In the present paper, three perspectives which are remaining challenges for applications of machine learning to fluid dynamics are considered: 1. interpretability of machine-learned results, 2. bulking out of training data, and 3. generalizability of neural networks. For the interpretability, we first demonstrate two methods to observe the internal procedure of neural networks, i.e., visualization of hidden layers and application of gradient-weighted class activation mapping (Grad-CAM), applied to canonical fluid flow estimation problems -- (1) drag coefficient estimation of a cylinder wake and (2) velocity estimation from particle images. It is exemplified that both approaches can successfully tell us evidences of the great capability of machine learning-based estimations. We then utilize some techniques to bulk out training data for super-resolution analysis and temporal prediction for cylinder wake and NOAA sea surface temperature data to demonstrate that sufficient training of neural networks with limited amount of training data can be achieved for fluid flow problems. The generalizability of machine learning model is also discussed by accounting for the perspectives of inter/extrapolation of training data, considering super-resolution of wakes behind two parallel cylinders. We find that various flow patterns generated by complex interaction between two cylinders can be reconstructed well, even for the test configurations regarding the distance factor. The present paper can be a significant step toward practical uses of neural networks for both laminar and turbulent flow problems.
PhysicsFormer: An Efficient and Fast Attention-Based Physics Informed Neural Network for Solving Incompressible Navier Stokes Equations
Traditional experimental and numerical approaches for fluid dynamics problems often suffer from high computational cost, mesh sensitivity, and limited capability in capturing complex physical behaviors. Moreover, conventional physics-informed neural networks (PINNs) frequently struggle in chaotic and highly unsteady flow regimes. In this work, we propose PhysicsFormer, a fast and efficient transformer-based physics-informed framework that incorporates multi-head encoder-decoder cross-attention. Unlike multilayer perceptron-based PINNs, PhysicsFormer operates on sequential representations constructed from spatio-temporal data, enabling effective learning of long-range temporal dependencies and improved propagation of initial condition information. A data-embedding strategy is employed to convert spatio-temporal points into pseudo-sequences, while a dynamics-weighted loss function replaces the standard PINNs formulation. Owing to its parallel learning structure, PhysicsFormer demonstrates superior computational efficiency compared to existing transformer-based approaches. The framework is validated on Burgers' equation and flow reconstruction governed by the Navier-Stokes equations, achieving mean squared errors on the order of 10^{-6}. In addition, an inverse problem involving parameter identification in the two-dimensional incompressible Navier-Stokes equations is investigated. For clean data, PhysicsFormer achieves zero identification error for both λ_1 and λ_2; under 1% Gaussian noise, the errors are 0.07% for λ_1 and 0% for λ_2. These results demonstrate that PhysicsFormer provides a reliable and computationally efficient surrogate modeling framework for time-dependent fluid flow problems.
On the local analyticity for the Euler equations
In this paper, we study the existence and uniqueness of solutions to the Euler equations with initial conditions that exhibit analytic regularity near the boundary and Sobolev regularity away from it. A key contribution of this work is the introduction of the diamond-analyticity framework, which captures the spatial decay of the analyticity radius in a structured manner, improving upon uniform analyticity approaches. We employ the Leray projection and a nonstandard mollification technique to demonstrate that the quotient between the imaginary and real parts of the analyticity radius remains unrestricted, thus extending the analyticity persistence results beyond traditional constraints. Our methodology combines analytic-Sobolev estimates with an iterative scheme which is nonstandard in the Cauchy-Kowalevskaya framework, ensuring rigorous control over the evolution of the solution. These results contribute to a deeper understanding of the interplay between analyticity and boundary effects in fluid equations. They might have implications for the study of the inviscid limit of the Navier-Stokes equations and the role of complex singularities in fluid dynamics.
WAKESET: A Large-Scale, High-Reynolds Number Flow Dataset for Machine Learning of Turbulent Wake Dynamics
Machine learning (ML) offers transformative potential for computational fluid dynamics (CFD), promising to accelerate simulations, improve turbulence modelling, and enable real-time flow prediction and control-capabilities that could fundamentally change how engineers approach fluid dynamics problems. However, the exploration of ML in fluid dynamics is critically hampered by the scarcity of large, diverse, and high-fidelity datasets suitable for training robust models. This limitation is particularly acute for highly turbulent flows, which dominate practical engineering applications yet remain computationally prohibitive to simulate at scale. High-Reynolds number turbulent datasets are essential for ML models to learn the complex, multi-scale physics characteristic of real-world flows, enabling generalisation beyond the simplified, low-Reynolds number regimes often represented in existing datasets. This paper introduces WAKESET, a novel, large-scale CFD dataset of highly turbulent flows, designed to address this critical gap. The dataset captures the complex hydrodynamic interactions during the underwater recovery of an autonomous underwater vehicle by a larger extra-large uncrewed underwater vehicle. It comprises 1,091 high-fidelity Reynolds-Averaged Navier-Stokes simulations, augmented to 4,364 instances, covering a wide operational envelope of speeds (up to Reynolds numbers of 1.09 x 10^8) and turning angles. This work details the motivation for this new dataset by reviewing existing resources, outlines the hydrodynamic modelling and validation underpinning its creation, and describes its structure. The dataset's focus on a practical engineering problem, its scale, and its high turbulence characteristics make it a valuable resource for developing and benchmarking ML models for flow field prediction, surrogate modelling, and autonomous navigation in complex underwater environments.
Neural Operator: Is data all you need to model the world? An insight into the impact of Physics Informed Machine Learning
Numerical approximations of partial differential equations (PDEs) are routinely employed to formulate the solution of physics, engineering and mathematical problems involving functions of several variables, such as the propagation of heat or sound, fluid flow, elasticity, electrostatics, electrodynamics, and more. While this has led to solving many complex phenomena, there are some limitations. Conventional approaches such as Finite Element Methods (FEMs) and Finite Differential Methods (FDMs) require considerable time and are computationally expensive. In contrast, data driven machine learning-based methods such as neural networks provide a faster, fairly accurate alternative, and have certain advantages such as discretization invariance and resolution invariance. This article aims to provide a comprehensive insight into how data-driven approaches can complement conventional techniques to solve engineering and physics problems, while also noting some of the major pitfalls of machine learning-based approaches. Furthermore, we highlight, a novel and fast machine learning-based approach (~1000x) to learning the solution operator of a PDE operator learning. We will note how these new computational approaches can bring immense advantages in tackling many problems in fundamental and applied physics.
A Physics-Informed Fourier-Wavelet Transformer for Multiscale Computational Fluid Dynamics Surrogate Modeling
Physics-informed surrogate models can accelerate computational fluid dynamics simulations. However, many existing methods reproduce global flow patterns more reliably than localized multiscale structures. This study presents a physics-informed Fourier-wavelet transformer for next-step velocity-field reconstruction in real-world flow benchmarks. The proposed formulation combines hybrid Fourier-wavelet spectral encoding with physics-biased self-attention based on partial differential equation residual diagnostics. It also uses self-supervised pretraining through Masked Physics Prediction and Equation Consistency Prediction. The experiments are conducted on two real benchmark cases: cylinder-wake flow and fluid-structure interaction. All approaches are evaluated under a shared local protocol and compared with spectral, transformer-based, operator-learning, and physics-informed neural-network baselines. On the cylinder-wake benchmark, the proposed model achieves the best aggregate accuracy, with an all-channel normalized mean-squared error of 0.05875 and an all-channel Pearson correlation coefficient of 0.97019. On the fluid-structure-interaction benchmark, it gives the lowest all-channel normalized mean-squared error of 2.70 times 10^{-4}, compared with 4.02 times 10^{-4} for the strongest baseline. Component-wise field comparisons and scale-separated diagnostics further show stronger recovery of localized wake structures, including near-body, wake-core, and far-wake features. The results demonstrate improved real-world flow reconstruction while maintaining a practical accuracy-cost tradeoff.
A variational model of nonlinear poroelasticity
We derive a thermodynamically-consistent model of fluid flow through a poroelastic medium. Starting from elastic and fluid free-energy densities, an energy-dissipation rate, and a kinematic constraint, the force-balance equations are derived using variational principles, with the pressure--density constitutive relation emerging as a direct consequence of the variational structure; the same kinematic constraint also supplies the total-flux transport structure. In the ideal-gas limit, the model linearization recovers the classical linear Biot equations. For power-law fluid energies, it yields isentropic pressure--density relations. A key advantage of the variational formulation is that extensions to richer physics, such as thermal effects, chemical reactions, or multi-component fluids, can be incorporated systematically by augmenting the energy and dissipation functionals without redesigning the force-balance or transport closure. We support the model with an energy-compatible two-field discretization and study consolidation under a surface load with three lateral-boundary treatments and three fluid-compressibility exponents.
(U)NFV: Supervised and Unsupervised Neural Finite Volume Methods for Solving Hyperbolic PDEs
We introduce (U)NFV, a modular neural network architecture that generalizes classical finite volume (FV) methods for solving hyperbolic conservation laws. Hyperbolic partial differential equations (PDEs) are challenging to solve, particularly conservation laws whose physically relevant solutions contain shocks and discontinuities. FV methods are widely used for their mathematical properties: convergence to entropy solutions, flow conservation, or total variation diminishing, but often lack accuracy and flexibility in complex settings. Neural Finite Volume addresses these limitations by learning update rules over extended spatial and temporal stencils while preserving conservation structure. It supports both supervised training on solution data (NFV) and unsupervised training via weak-form residual loss (UNFV). Applied to first-order conservation laws, (U)NFV achieves up to 10x lower error than Godunov's method, outperforms ENO/WENO, and rivals discontinuous Galerkin solvers with far less complexity. On traffic modeling problems, both from PDEs and from experimental highway data, (U)NFV captures nonlinear wave dynamics with significantly higher fidelity and scalability than traditional FV approaches.
FlowBench: A Large Scale Benchmark for Flow Simulation over Complex Geometries
Simulating fluid flow around arbitrary shapes is key to solving various engineering problems. However, simulating flow physics across complex geometries remains numerically challenging and computationally resource-intensive, particularly when using conventional PDE solvers. Machine learning methods offer attractive opportunities to create fast and adaptable PDE solvers. However, benchmark datasets to measure the performance of such methods are scarce, especially for flow physics across complex geometries. We introduce FlowBench, a dataset for neural simulators with over 10K samples, which is currently larger than any publicly available flow physics dataset. FlowBench contains flow simulation data across complex geometries (parametric vs. non-parametric), spanning a range of flow conditions (Reynolds number and Grashoff number), capturing a diverse array of flow phenomena (steady vs. transient; forced vs. free convection), and for both 2D and 3D. FlowBench contains over 10K data samples, with each sample the outcome of a fully resolved, direct numerical simulation using a well-validated simulator framework designed for modeling transport phenomena in complex geometries. For each sample, we include velocity, pressure, and temperature field data at 3 different resolutions and several summary statistics features of engineering relevance (such as coefficients of lift and drag, and Nusselt numbers). %Additionally, we include masks and signed distance fields for each shape. We envision that FlowBench will enable evaluating the interplay between complex geometry, coupled flow phenomena, and data sufficiency on the performance of current, and future, neural PDE solvers. We enumerate several evaluation metrics to help rank order the performance of neural PDE solvers. We benchmark the performance of several baseline methods including FNO, CNO, WNO, and DeepONet.
Long time derivation of the Boltzmann equation from hard sphere dynamics
We provide a rigorous derivation of Boltzmann's kinetic equation from the hard sphere system for rarefied gas, which is valid for arbitrarily long times, as long as the solution to the Boltzmann equation exists. This extends Lanford's landmark theorem (1975), which justifies this derivation for a sufficiently short time. In a companion paper (arXiv:2503.01800), we connect this derivation to existing literature on hydrodynamic limits. This completes the resolution of Hilbert's Sixth Problem pertaining to the derivation of fluid equations from Newton's laws, in the case of a rarefied, hard sphere gas. The general strategy follows the paradigm introduced by the first two authors for the long-time derivation of the wave kinetic equation in wave turbulence theory. This is based on propagating a long-time cumulant ansatz, which keeps memory of the full collision history of the relevant particles, by an important partial time expansion. The heart of the matter is proving the smallness of these cumulants in L^1, which can be reduced to combinatorial properties for the associated diagrams which we call molecules. These properties are then proved by devising an elaborate cutting algorithm, which is a major novelty of this work.
A Deep Conjugate Direction Method for Iteratively Solving Linear Systems
We present a novel deep learning approach to approximate the solution of large, sparse, symmetric, positive-definite linear systems of equations. These systems arise from many problems in applied science, e.g., in numerical methods for partial differential equations. Algorithms for approximating the solution to these systems are often the bottleneck in problems that require their solution, particularly for modern applications that require many millions of unknowns. Indeed, numerical linear algebra techniques have been investigated for many decades to alleviate this computational burden. Recently, data-driven techniques have also shown promise for these problems. Motivated by the conjugate gradients algorithm that iteratively selects search directions for minimizing the matrix norm of the approximation error, we design an approach that utilizes a deep neural network to accelerate convergence via data-driven improvement of the search directions. Our method leverages a carefully chosen convolutional network to approximate the action of the inverse of the linear operator up to an arbitrary constant. We train the network using unsupervised learning with a loss function equal to the L^2 difference between an input and the system matrix times the network evaluation, where the unspecified constant in the approximate inverse is accounted for. We demonstrate the efficacy of our approach on spatially discretized Poisson equations with millions of degrees of freedom arising in computational fluid dynamics applications. Unlike state-of-the-art learning approaches, our algorithm is capable of reducing the linear system residual to a given tolerance in a small number of iterations, independent of the problem size. Moreover, our method generalizes effectively to various systems beyond those encountered during training.
Solving nonlinear subsonic compressible flow in infinite domain via multi-stage neural networks
In aerodynamics, accurately modeling subsonic compressible flow over airfoils is critical for aircraft design. However, solving the governing nonlinear perturbation velocity potential equation presents computational challenges. Traditional approaches often rely on linearized equations or finite, truncated domains, which introduce non-negligible errors and limit applicability in real-world scenarios. In this study, we propose a novel framework utilizing Physics-Informed Neural Networks (PINNs) to solve the full nonlinear compressible potential equation in an unbounded (infinite) domain. We address the unbounded-domain and convergence challenges inherent in standard PINNs by incorporating a coordinate transformation and embedding physical asymptotic constraints directly into the network architecture. Furthermore, we employ a Multi-Stage PINN (MS-PINN) approach to iteratively minimize residuals, achieving solution accuracy approaching machine precision. We validate this framework by simulating flow over circular and elliptical geometries, comparing our results against traditional finite-domain and linearized solutions. Our findings quantify the noticeable discrepancies introduced by domain truncation and linearization, particularly at higher Mach numbers, and demonstrate that this new framework is a robust, high-fidelity tool for computational fluid dynamics.
Symmetric Basis Convolutions for Learning Lagrangian Fluid Mechanics
Learning physical simulations has been an essential and central aspect of many recent research efforts in machine learning, particularly for Navier-Stokes-based fluid mechanics. Classic numerical solvers have traditionally been computationally expensive and challenging to use in inverse problems, whereas Neural solvers aim to address both concerns through machine learning. We propose a general formulation for continuous convolutions using separable basis functions as a superset of existing methods and evaluate a large set of basis functions in the context of (a) a compressible 1D SPH simulation, (b) a weakly compressible 2D SPH simulation, and (c) an incompressible 2D SPH Simulation. We demonstrate that even and odd symmetries included in the basis functions are key aspects of stability and accuracy. Our broad evaluation shows that Fourier-based continuous convolutions outperform all other architectures regarding accuracy and generalization. Finally, using these Fourier-based networks, we show that prior inductive biases, such as window functions, are no longer necessary. An implementation of our approach, as well as complete datasets and solver implementations, is available at https://github.com/tum-pbs/SFBC.
Space and Time Continuous Physics Simulation From Partial Observations
Modern techniques for physical simulations rely on numerical schemes and mesh-refinement methods to address trade-offs between precision and complexity, but these handcrafted solutions are tedious and require high computational power. Data-driven methods based on large-scale machine learning promise high adaptivity by integrating long-range dependencies more directly and efficiently. In this work, we focus on fluid dynamics and address the shortcomings of a large part of the literature, which are based on fixed support for computations and predictions in the form of regular or irregular grids. We propose a novel setup to perform predictions in a continuous spatial and temporal domain while being trained on sparse observations. We formulate the task as a double observation problem and propose a solution with two interlinked dynamical systems defined on, respectively, the sparse positions and the continuous domain, which allows to forecast and interpolate a solution from the initial condition. Our practical implementation involves recurrent GNNs and a spatio-temporal attention observer capable of interpolating the solution at arbitrary locations. Our model not only generalizes to new initial conditions (as standard auto-regressive models do) but also performs evaluation at arbitrary space and time locations. We evaluate on three standard datasets in fluid dynamics and compare to strong baselines, which are outperformed both in classical settings and in the extended new task requiring continuous predictions.
CFDBench: A Large-Scale Benchmark for Machine Learning Methods in Fluid Dynamics
In recent years, applying deep learning to solve physics problems has attracted much attention. Data-driven deep learning methods produce fast numerical operators that can learn approximate solutions to the whole system of partial differential equations (i.e., surrogate modeling). Although these neural networks may have lower accuracy than traditional numerical methods, they, once trained, are orders of magnitude faster at inference. Hence, one crucial feature is that these operators can generalize to unseen PDE parameters without expensive re-training.In this paper, we construct CFDBench, a benchmark tailored for evaluating the generalization ability of neural operators after training in computational fluid dynamics (CFD) problems. It features four classic CFD problems: lid-driven cavity flow, laminar boundary layer flow in circular tubes, dam flows through the steps, and periodic Karman vortex street. The data contains a total of 302K frames of velocity and pressure fields, involving 739 cases with different operating condition parameters, generated with numerical methods. We evaluate the effectiveness of popular neural operators including feed-forward networks, DeepONet, FNO, U-Net, etc. on CFDBnech by predicting flows with non-periodic boundary conditions, fluid properties, and flow domain shapes that are not seen during training. Appropriate modifications were made to apply popular deep neural networks to CFDBench and enable the accommodation of more changing inputs. Empirical results on CFDBench show many baseline models have errors as high as 300% in some problems, and severe error accumulation when performing autoregressive inference. CFDBench facilitates a more comprehensive comparison between different neural operators for CFD compared to existing benchmarks.
Physics-aware generative models for turbulent fluid flows through energy-consistent stochastic interpolants
Generative models have demonstrated remarkable success in domains such as text, image, and video synthesis. In this work, we explore the application of generative models to fluid dynamics, specifically for turbulence simulation, where classical numerical solvers are computationally expensive. We propose a novel stochastic generative model based on stochastic interpolants, which enables probabilistic forecasting while incorporating physical constraints such as energy stability and divergence-freeness. Unlike conventional stochastic generative models, which are often agnostic to underlying physical laws, our approach embeds energy consistency by making the parameters of the stochastic interpolant learnable coefficients. We evaluate our method on a benchmark turbulence problem - Kolmogorov flow - demonstrating superior accuracy and stability over state-of-the-art alternatives such as autoregressive conditional diffusion models (ACDMs) and PDE-Refiner. Furthermore, we achieve stable results for significantly longer roll-outs than standard stochastic interpolants. Our results highlight the potential of physics-aware generative models in accelerating and enhancing turbulence simulations while preserving fundamental conservation properties.
On the Role of Strain and Vorticity in Numerical Integration Error for Flow Matching
Flow matching generates data by integrating a learned velocity field, where the number of integration steps (NFE) directly determines inference cost. We analyze which properties of the velocity field govern integration error by decomposing the velocity Jacobian into its symmetric part S (strain rate) and antisymmetric part Omega (vorticity). We prove that strain and vorticity play different roles: strain controls exponential error amplification through the logarithmic norm, while vorticity contributes only linearly to the local truncation error. We further show that the optimal transport velocity field is irrotational and has zero material derivative, implying second-order Euler accuracy; for exact displacement interpolation, the associated Lagrangian particle dynamics are integrated exactly by Euler. Motivated by this analysis, we study weighted Jacobian regularization with strain weight alpha and vorticity weight beta. Experiments on 2D synthetic data confirm the main theoretical predictions, showing up to 2.7x lower integration error at NFE=5. Preliminary CIFAR-10 experiments show consistent trends, with a lightweight fine-tuning procedure improving FID by 14 percent at NFE=10 while preserving high-NFE quality.
Physics-Informed Neural Network for the Transient Diffusivity Equation in Reservoir Engineering
Physics-Informed machine learning models have recently emerged with some interesting and unique features that can be applied to reservoir engineering. In particular, physics-informed neural networks (PINN) leverage the fact that neural networks are a type of universal function approximators that can embed the knowledge of any physical laws that govern a given data-set in the learning process, and can be described by partial differential equations. The transient diffusivity equation is a fundamental equation in reservoir engineering and the general solution to this equation forms the basis for Pressure Transient Analysis (PTA). The diffusivity equation is derived by combining three physical principles, the continuity equation, Darcy's equation, and the equation of state for a slightly compressible liquid. Obtaining general solutions to this equation is imperative to understand flow regimes in porous media. Analytical solutions of the transient diffusivity equation are usually hard to obtain due to the stiff nature of the equation caused by the steep gradients of the pressure near the well. In this work we apply physics-informed neural networks to the one and two dimensional diffusivity equation and demonstrate that decomposing the space domain into very few subdomains can overcome the stiffness problem of the equation. Additionally, we demonstrate that the inverse capabilities of PINNs can estimate missing physics such as permeability and distance from sealing boundary similar to buildup tests without shutting in the well.
Geometry-Aware Physics-Informed PointNets for Modeling Flows Across Porous Structures
Predicting flows that occur both through and around porous bodies is challenging due to coupled physics across fluid and porous regions and the need to generalize across diverse geometries and boundary conditions. We address this problem using two Physics Informed learning approaches: Physics Informed PointNets (PIPN) and Physics Informed Geometry Aware Neural Operator (P-IGANO). We enforce the incompressible Navier Stokes equations in the free-flow region and a Darcy Forchheimer extension in the porous region within a unified loss and condition the networks on geometry and material parameters. Datasets are generated with OpenFOAM on 2D ducts containing porous obstacles and on 3D windbreak scenarios with tree canopies and buildings. We first verify the pipeline via the method of manufactured solutions, then assess generalization to unseen shapes, and for PI-GANO, to variable boundary conditions and parameter settings. The results show consistently low velocity and pressure errors in both seen and unseen cases, with accurate reproduction of the wake structures. Performance degrades primarily near sharp interfaces and in regions with large gradients. Overall, the study provides a first systematic evaluation of PIPN/PI-GANO for simultaneous through-and-around porous flows and shows their potential to accelerate design studies without retraining per geometry.
Physics-aware registration based auto-encoder for convection dominated PDEs
We design a physics-aware auto-encoder to specifically reduce the dimensionality of solutions arising from convection-dominated nonlinear physical systems. Although existing nonlinear manifold learning methods seem to be compelling tools to reduce the dimensionality of data characterized by a large Kolmogorov n-width, they typically lack a straightforward mapping from the latent space to the high-dimensional physical space. Moreover, the realized latent variables are often hard to interpret. Therefore, many of these methods are often dismissed in the reduced order modeling of dynamical systems governed by the partial differential equations (PDEs). Accordingly, we propose an auto-encoder type nonlinear dimensionality reduction algorithm. The unsupervised learning problem trains a diffeomorphic spatio-temporal grid, that registers the output sequence of the PDEs on a non-uniform parameter/time-varying grid, such that the Kolmogorov n-width of the mapped data on the learned grid is minimized. We demonstrate the efficacy and interpretability of our approach to separate convection/advection from diffusion/scaling on various manufactured and physical systems.
Flow Matching Meets PDEs: A Unified Framework for Physics-Constrained Generation
Generative machine learning methods, such as diffusion models and flow matching, have shown great potential in modeling complex system behaviors and building efficient surrogate models. However, these methods typically learn the underlying physics implicitly from data. We propose Physics-Based Flow Matching (PBFM), a novel generative framework that explicitly embeds physical constraints, both PDE residuals and algebraic relations, into the flow matching objective. We also introduce temporal unrolling at training time that improves the accuracy of the final, noise-free sample prediction. Our method jointly minimizes the flow matching loss and the physics-based residual loss without requiring hyperparameter tuning of their relative weights. Additionally, we analyze the role of the minimum noise level, sigma_{min}, in the context of physical constraints and evaluate a stochastic sampling strategy that helps to reduce physical residuals. Through extensive benchmarks on three representative PDE problems, we show that our approach yields up to an 8times more accurate physical residuals compared to FM, while clearly outperforming existing algorithms in terms of distributional accuracy. PBFM thus provides a principled and efficient framework for surrogate modeling, uncertainty quantification, and accelerated simulation in physics and engineering applications.
Adaptive Mesh-Quantization for Neural PDE Solvers
Physical systems commonly exhibit spatially varying complexity, presenting a significant challenge for neural PDE solvers. While Graph Neural Networks can handle the irregular meshes required for complex geometries and boundary conditions, they still apply uniform computational effort across all nodes regardless of the underlying physics complexity. This leads to inefficient resource allocation where computationally simple regions receive the same treatment as complex phenomena. We address this challenge by introducing Adaptive Mesh Quantization: spatially adaptive quantization across mesh node, edge, and cluster features, dynamically adjusting the bit-width used by a quantized model. We propose an adaptive bit-width allocation strategy driven by a lightweight auxiliary model that identifies high-loss regions in the input mesh. This enables dynamic resource distribution in the main model, where regions of higher difficulty are allocated increased bit-width, optimizing computational resource utilization. We demonstrate our framework's effectiveness by integrating it with two state-of-the-art models, MP-PDE and GraphViT, to evaluate performance across multiple tasks: 2D Darcy flow, large-scale unsteady fluid dynamics in 2D, steady-state Navier-Stokes simulations in 3D, and a 2D hyper-elasticity problem. Our framework demonstrates consistent Pareto improvements over uniformly quantized baselines, yielding up to 50% improvements in performance at the same cost.
Conditional Normalizing Flow for Gas-Surface Scattering from Thermal to Hypersonic Velocities
Accurate aerodynamic modeling of satellites in very low Earth orbit (VLEO) requires gas-surface interaction (GSI) models that capture the full velocity spectrum from thermal to orbital speeds. Atmospheric particles initially strike spacecraft surfaces at hypersonic velocities of 6 000 - 10 000 m/s. Due to surface roughness and complex geometries, especially within air-breathing electric propulsion (ABEP) intake systems, multiple collisions occur, progressively reducing the particle velocities. A recent machine learning framework for deriving scattering kernels from molecular dynamics (MD) simulations has shown promise, but remains limited to high-velocity single impacts and possibly violates fundamental equilibrium principles such as detailed balance. This work extends this machine learning based scattering kernel to cover the complete velocity range using conditional normalizing flows trained with physics-informed constraints, enabling accurate modeling of multi-bounce scenarios in realistic VLEO applications. We train a conditional Real-valued Non-Volume Preserving (cRealNVP) model on expanded molecular dynamics simulations covering velocities from thermal to hypersonic speeds, incorporating a detailed balance loss term. The resulting model demonstrates improved accuracy compared to previous approaches even in the original high-velocity regime, while successfully capturing thermal-velocity scattering. Quantitative assessment shows that thermalization is approximated within acceptable tolerances. This framework provides essential capabilities for accurate ABEP intake optimization and VLEO mission planning while offering a general methodology applicable to broader rarefied gas dynamics problems requiring thermodynamic consistency.
Parametrization of subgrid scales in long-term simulations of the shallow-water equations using machine learning and convex limiting
We present a method for parametrizing sub-grid processes in the Shallow Water equations. We define coarse variables and local spatial averages and use a feed-forward neural network to learn sub-grid fluxes. Our method results in a local parametrization that uses a four-point computational stencil, which has several advantages over globally coupled parametrizations. We demonstrate numerically that our method improves energy balance in long-term turbulent simulations and also accurately reproduces individual solutions. The neural network parametrization can be easily combined with flux limiting to reduce oscillations near shocks. More importantly, our method provides reliable parametrizations, even in dynamical regimes that are not included in the training data.
Physics-informed coherent motions to predict Lagrangian trajectories
Accurate prediction of Lagrangian trajectories in turbulent flow remains challenging due to limited temporal information in transport functions. This paper shows that surrounding coherent motions sharing the same dynamics carry enough information to provide highly probable trajectories even from sparse temporal observations. The proposed coherent predictor builds on Lagrangian coherent structures (LCSs), the advective transport barriers that govern the cohesive motion of neighbouring particles. Coherent trajectories are quantified using a local segmentation with the finite-time Lyapunov exponents (FTLE). The coherent predictor incorporates information from the particle's position history and neighbouring coherent velocity and acceleration into a novel cost function to predict its trajectory. The proposed cost function follows a physics-informed approach where the position history acts as a data fidelity term and the coherent velocity and acceleration act as physics-based regularisation constraints. We assess our proposed approach using both three-dimensional (3D) synthetic and experimental data of the wake behind a smooth cylinder and two-dimensional (2D) homogeneous isotropic turbulent (HIT) flow. The coherent predictor is deemed generic due to its consistent behaviour regardless of flow dimensions, Reynolds number, and flow topology. Our results show that the optimal cost function parameters can be modelled from the measurement uncertainties, giving lower prediction error and uncertainty than current methods. We see direct signatures of flow topology on the prediction error map, including the cylinder leading edge boundary layer, the sideward shear layers, and the vortex formation structures. These topologies are marked by high Lagrangian gradients and 3D directional motions.
PDE-Refiner: Achieving Accurate Long Rollouts with Neural PDE Solvers
Time-dependent partial differential equations (PDEs) are ubiquitous in science and engineering. Recently, mostly due to the high computational cost of traditional solution techniques, deep neural network based surrogates have gained increased interest. The practical utility of such neural PDE solvers relies on their ability to provide accurate, stable predictions over long time horizons, which is a notoriously hard problem. In this work, we present a large-scale analysis of common temporal rollout strategies, identifying the neglect of non-dominant spatial frequency information, often associated with high frequencies in PDE solutions, as the primary pitfall limiting stable, accurate rollout performance. Based on these insights, we draw inspiration from recent advances in diffusion models to introduce PDE-Refiner; a novel model class that enables more accurate modeling of all frequency components via a multistep refinement process. We validate PDE-Refiner on challenging benchmarks of complex fluid dynamics, demonstrating stable and accurate rollouts that consistently outperform state-of-the-art models, including neural, numerical, and hybrid neural-numerical architectures. We further demonstrate that PDE-Refiner greatly enhances data efficiency, since the denoising objective implicitly induces a novel form of spectral data augmentation. Finally, PDE-Refiner's connection to diffusion models enables an accurate and efficient assessment of the model's predictive uncertainty, allowing us to estimate when the surrogate becomes inaccurate.
Anelastic approximation for the degenerate compressible Navier--Stokes equations revisited
In this paper, we revisit the joint low-Mach and low-Frode number limit for the compressible Navier-Stokes equations with degenerate, density-dependent viscosity. Employing the relative entropy framework based on the concept of κ-entropy, we rigorously justify the convergence of weak solutions toward the generalized anelastic system in a three-dimensional periodic domain for well-prepared initial data. For general ill-prepared initial data, we establish a similar convergence result in the whole space, relying essentially on dispersive estimates for acoustic waves. Compared with the work of Fanelli and Zatorska [Commun. Math. Phys., 400 (2023), pp. 1463-1506], our analysis is conducted for the standard isentropic pressure law, thereby eliminating the need for the cold pressure term that played a crucial role in the previous approach. To the best of our knowledge, this is the first rigorous singular limit result for the compressible Navier-Stokes equations with degenerate viscosity that requires no additional regularization of the system.
The Rayleigh-Boltzmann equation with shear deformations in the hyperbolic-dominated regime
In this paper we consider a particular class of solutions of the Rayleigh-Boltzmann equation, known in the nonlinear setting as homoenergetic solutions, which have the form gleft( x,v,t right) =fleft( v-Lleft( tright)x,tright) where the matrix L(t) describes a shear flow deformation. We began this analysis in [22] where we rigorously proved the existence of a stationary non-equilibrium solution and established the different behaviour of the solutions for small and large values of the shear parameter, for cut-off collision kernels with homogeneity parameter 0leq gamma <1, including Maxwell molecules and hard potentials. In this paper, we concentrate in the case where the deformation term dominates the collision term for large times (hyperbolic-dominated regime). This occurs for collision kernels with gamma < 0 and in particular we focus on gamma in (-1,0). In such a hyperbolic-dominated regime, it appears challenging to provide a clear description of the long-term asymptotics of the solutions. Here we present a formal analysis of the long-time asymptotics for the distribution of velocities and provide the explicit form for the asymptotic profile. Additionally, we discuss the different asymptotic behaviour expected in the case of homogeneity gamma < -1. Furthermore, we provide a probabilistic interpretation describing a stochastic process consisting in a combination of collisions and shear flows. The tagged particle velocity {v(t)}_{tgeq 0} is a Markov process that arises from the combination of free flights in a shear flow along with random jumps caused by collisions.
How to build a consistency model: Learning flow maps via self-distillation
Flow-based generative models achieve state-of-the-art sample quality, but require the expensive solution of a differential equation at inference time. Flow map models, commonly known as consistency models, encompass many recent efforts to improve inference-time efficiency by learning the solution operator of this differential equation. Yet despite their promise, these models lack a unified description that clearly explains how to learn them efficiently in practice. Here, building on the methodology proposed in Boffi et. al. (2024), we present a systematic algorithmic framework for directly learning the flow map associated with a flow or diffusion model. By exploiting a relationship between the velocity field underlying a continuous-time flow and the instantaneous rate of change of the flow map, we show how to convert any distillation scheme into a direct training algorithm via self-distillation, eliminating the need for pre-trained teachers. We introduce three algorithmic families based on different mathematical characterizations of the flow map: Eulerian, Lagrangian, and Progressive methods, which we show encompass and extend all known distillation and direct training schemes for consistency models. We find that the novel class of Lagrangian methods, which avoid both spatial derivatives and bootstrapping from small steps by design, achieve significantly more stable training and higher performance than more standard Eulerian and Progressive schemes. Our methodology unifies existing training schemes under a single common framework and reveals new design principles for accelerated generative modeling. Associated code is available at https://github.com/nmboffi/flow-maps.
Physics-Informed Video Diffusion For Shallow Water Equations
Traditional fluid dynamics simulation pipelines combine numerical solvers with rendering, producing highly realistic results but at considerable computational cost. Diffusion-based generative video models offer a faster alternative, yet often ignore physical laws and thus fail to capture consistent dynamics. We propose a physics-informed video diffusion framework that jointly generates visual outputs and physical states. Unlike prior two-stage approaches that first simulate the physical variables and then render, we directly integrate physics constraints into the generative process, enabling simultaneous prediction of physical states and realistic videos without a separate rendering step. Built on the two-dimensional shallow water equations with terrain topography, our method produces temporally coherent water flow while maintaining physical plausibility. Experiments show that it outperforms purely data-driven video diffusion baselines in both realism and physical fidelity, while generating videos significantly faster than traditional simulation-plus-rendering pipelines.
Lagrangian Coherent Track Initialisation (LCTI)
Advances in time-resolved Particle Tracking Velocimetry (4D-PTV) techniques have been consistently revealed more accurate Lagrangian particle motions. A novel track initialisation technique as a complementary part of 4D-PTV, based on local temporal and spatial coherency of neighbour trajectories, is proposed. The proposed Lagrangian Coherent Track Initialisation (LCTI) applies physics-based Finite Time Lyapunov Exponent (FTLE) to build four frame coherent tracks. We locally determine the boundaries (i.e., ridges) of Lagrangian Coherent Structures (LCS) among neighbour trajectories by using FTLE to distinguish clusters of coherent motions. To evaluate the proposed technique, we created an open-access synthetic Lagrangian and Eulerian dataset of the wake downstream of a smooth cylinder at a Reynolds number equal to 3900 obtained from 3D Direct Numerical Simulation (DNS). The dataset is available to the public. Performance of the proposed method based on three characteristic parameters, temporal scale, particle concentration (i.e., density), and noise ratio, showed robust behaviour in finding true tracks compared to the recent initialisation algorithms. Sensitivity of LCTI to the number of untracked and wrong tracks are also discussed. We address the capability of using the proposed method as a function of a 4D-PTV scheme in the Lagrangian Particle Tracking challenge for a flow with high particle densities. Finally, the LCTI behaviour was assessed in a real jet impingement experiment. LCTI was found to be a reliable tracking tool in complex flow motions, with a strength revealed for flows with high particle concentrations.
Uniqueness and stability of planar shock wave to 2D compressible Euler equations in the vanishing viscosity limit of compressible Navier-Stokes equations
It is well known that the compressible Euler equations with planar shock initial data may admit infinitely many entropy weak solutions, as shown by Chiodaroli, De Lellis and Kreml [Comm. Pure Appl. Math. (2015)]. In this paper, we introduce a suitable notion of global-in-time weak solutions to the two-dimensional (2D) compressible Navier-Stokes equations with density-dependent viscosities in R times T. Within this solution framework, we establish the first vanishing viscosity limit selection criterion for the physically relevant planar shock solution to the 2D compressible Euler equations. More precisely, we prove the uniqueness and stability of the 2D Euler planar shock solution within a class of inviscid limits of Navier-Stokes solutions emanating from near-planar initial data while the shock direction perturbation can be arbitrarily large. Starting from the relative κ-entropy for 2D compressible Navier-Stokes equations in T^2 by Bresch, Noble and Vila [ESAIM Proc. Surveys (2017)], we first establish the relative frac12-entropy between 2D weak solution of compressible Navier-Stokes equations in R times T and one-dimensional (1D) strong solution for averaged initial data in R. Then we achieve the desired vanishing viscosity limit selection criterion by successfully bridging the fundamental structural gap between 2D Eulerian formulation of the original Navier-Stokes system in the relative frac12-entropy and 1D vanishing viscosity limit to a shock solution of Euler equations in Lagrangian coordinates by Kang and Vasseur [Invent. Math. (2021)]. The framework developed herein can be applied to the three-dimensional limit selection criterion in R times T^2, as well as to more complex planar Riemann solutions and interacting wave patterns.
Random Grid Neural Processes for Parametric Partial Differential Equations
We introduce a new class of spatially stochastic physics and data informed deep latent models for parametric partial differential equations (PDEs) which operate through scalable variational neural processes. We achieve this by assigning probability measures to the spatial domain, which allows us to treat collocation grids probabilistically as random variables to be marginalised out. Adapting this spatial statistics view, we solve forward and inverse problems for parametric PDEs in a way that leads to the construction of Gaussian process models of solution fields. The implementation of these random grids poses a unique set of challenges for inverse physics informed deep learning frameworks and we propose a new architecture called Grid Invariant Convolutional Networks (GICNets) to overcome these challenges. We further show how to incorporate noisy data in a principled manner into our physics informed model to improve predictions for problems where data may be available but whose measurement location does not coincide with any fixed mesh or grid. The proposed method is tested on a nonlinear Poisson problem, Burgers equation, and Navier-Stokes equations, and we provide extensive numerical comparisons. We demonstrate significant computational advantages over current physics informed neural learning methods for parametric PDEs while improving the predictive capabilities and flexibility of these models.
Unsteady and inertial dynamics of an active particle in a fluid
It is well known that the reversibility of Stokes flow makes it difficult for small microorganisms to swim. Inertial effects break this reversibility, allowing new mechanisms of propulsion and feeding. Therefore it is important to understand the effects of unsteady and fluid inertia on the dynamics of microorganisms in flow. In this work, we show how to translate known inertial effects for non-motile organisms to motile ones, from passive to active particles. The method relies on a principle used earlier by Legendre and Magnaudet (1997) to deduce inertial corrections to the lift force on a bubble from the inertial drag on a solid sphere, using the fact that small inertial effects are determined by the far field of the disturbance flow. The method allows for example to compute the inertial effect of unsteady fluid accelerations on motile organisms, and the inertial forces such organisms experience in steady shear flow. We explain why the method fails to describe the effect of convective fluid inertia.
Global strong solutions to the 1D full compressible Navier--Stokes equations with temperature-dependent coefficients and vacuum
We study the initial--boundary value problem for the one-dimensional full compressible Navier--Stokes system whose viscosity and heat conductivity are given by μ(θ)=μθ^α and κ(θ)=κθ^β, respectively. The initial density is nonnegative and is allowed to vanish. For α>2 and β>2α+4, we prove the existence of a global strong solution for arbitrarily large compatible H^2 data, provided that the prescribed boundary temperature is sufficiently high relative to their size. No velocity or temperature perturbation is required to shrink as the boundary temperature tends to infinity. A shifted initial-layer weight and an exact symmetrization of the two material-derivative equations separate the fast thermal mode from the momentum mode. The resulting estimates are uniform with respect to the positive lower bound used in the approximation and therefore survive the limit to genuine vacuum. The proof further combines a relative-entropy identity centered at the conserved mean density, the physical effective viscous flux, a Zlotnik-type estimate along particle trajectories, and finite-time transport estimates for the density derivatives. The density remains uniformly bounded and the temperature stays uniformly comparable with the prescribed boundary temperature. After the initial layer we establish vacuum-compatible exponential relaxation: the density converges to its conserved mean in every finite L^p, the velocity and temperature perturbation decay in H^1, and the weighted material-derivative energy decays at rate cbarθ^{1-α}.
Synthetic Lagrangian Turbulence by Generative Diffusion Models
Lagrangian turbulence lies at the core of numerous applied and fundamental problems related to the physics of dispersion and mixing in engineering, bio-fluids, atmosphere, oceans, and astrophysics. Despite exceptional theoretical, numerical, and experimental efforts conducted over the past thirty years, no existing models are capable of faithfully reproducing statistical and topological properties exhibited by particle trajectories in turbulence. We propose a machine learning approach, based on a state-of-the-art diffusion model, to generate single-particle trajectories in three-dimensional turbulence at high Reynolds numbers, thereby bypassing the need for direct numerical simulations or experiments to obtain reliable Lagrangian data. Our model demonstrates the ability to reproduce most statistical benchmarks across time scales, including the fat-tail distribution for velocity increments, the anomalous power law, and the increased intermittency around the dissipative scale. Slight deviations are observed below the dissipative scale, particularly in the acceleration and flatness statistics. Surprisingly, the model exhibits strong generalizability for extreme events, producing events of higher intensity and rarity that still match the realistic statistics. This paves the way for producing synthetic high-quality datasets for pre-training various downstream applications of Lagrangian turbulence.
Poseidon: Efficient Foundation Models for PDEs
We introduce Poseidon, a foundation model for learning the solution operators of PDEs. It is based on a multiscale operator transformer, with time-conditioned layer norms that enable continuous-in-time evaluations. A novel training strategy leveraging the semi-group property of time-dependent PDEs to allow for significant scaling-up of the training data is also proposed. Poseidon is pretrained on a diverse, large scale dataset for the governing equations of fluid dynamics. It is then evaluated on a suite of 15 challenging downstream tasks that include a wide variety of PDE types and operators. We show that Poseidon exhibits excellent performance across the board by outperforming baselines significantly, both in terms of sample efficiency and accuracy. Poseidon also generalizes very well to new physics that is not seen during pretraining. Moreover, Poseidon scales with respect to model and data size, both for pretraining and for downstream tasks. Taken together, our results showcase the surprising ability of Poseidon to learn effective representations from a very small set of PDEs during pretraining in order to generalize well to unseen and unrelated PDEs downstream, demonstrating its potential as an effective, general purpose PDE foundation model. Finally, the Poseidon model as well as underlying pretraining and downstream datasets are open sourced, with code being available at https://github.com/camlab-ethz/poseidon and pretrained models and datasets at https://huggingface.co/camlab-ethz.
LSTM-PINN for Steady-State Electrothermal Transport: Preserving Multi-Field Consis tency in Strongly Coupled Heat and Fluid Flow
Steady-state electrothermal systems involve strongly coupled heat transfer, fluid flow, and electric-potential transport, creating severe numerical challenges for standard physics-informed neural networks (PINNs) due to stark disparities in gradient scales and residual stiffnesses across the physical fields. To resolve these multiphysics bottlenecks, we introduce a Long Short-Term Memory PINN (LSTM-PINN) framework that utilizes a depth-recursive memory mechanism to preserve long-range spatial feature dependencies and maintain strict cross-field consistency. The proposed architecture is rigorously evaluated against conventional and attention-based networks across a unified five-field formulation encompassing four complex convective and drag regimes: Boussinesq electrothermal flow, drift-potential gauge-constrained transport, strong buoyancy-coupled convection, and Brinkman--Forchheimer drift. Quantitative and visual analyses demonstrate that LSTM-PINN successfully suppresses non-physical artifacts and structural distortions, yielding the highest thermodynamic fidelity and consistently outperforming state-of-the-art baselines in global error metrics. Ultimately, this memory-enhanced approach provides a highly robust and accurate computational baseline for capturing localized boundary layers and complex energy-momentum feedback in advanced electrothermal energy systems.
Physics-Informed Neural Networks for Solving the Two-Dimensional Shallow Water Equations with Terrain Topography and Rainfall Source Terms
Solving the two-dimensional shallow water equations is a fundamental problem in flood simulation technology. In recent years, physics-informed neural networks (PINNs) have emerged as a novel methodology for addressing this problem. Given their advantages in parallel computing, the potential for data assimilation and parameter calibration, and the rapid advancement of artificial intelligence, it is crucial to investigate both the capabilities and limitations of PINNs. While current research has demonstrated the significant potential of PINNs, many aspects of this new approach remain to be explored. In this study, we employ PINNs enhanced by dimensional transformation and N-LAAF techniques to validate their effectiveness in solving two-dimensional free surface flow with rainfall on terrain topography. The shallow water equations primarily exist in two forms: the variables form and the conservative form. Through theoretical analysis and experimental validation, we demonstrate that a hybrid variable-conservation form offers superior performance. Additionally, we find that incorporating the energy conservation law, specifically the entropy condition, does not yield substantial improvements and may even lead to training failure. Furthermore, we have developed an open-source module on the PINNacle platform for solving shallow water equations using PINNs, which includes over ten case studies and various equation forms, to promote research and application in this field.
Finding extremal periodic orbits with polynomial optimisation, with application to a nine-mode model of shear flow
Tobasco et al. [Physics Letters A, 382:382-386, 2018; see https://doi.org/10.1016/j.physleta.2017.12.023] recently suggested that trajectories of ODE systems that optimize the infinite-time average of a certain observable can be localized using sublevel sets of a function that arise when bounding such averages using so-called auxiliary functions. In this paper we demonstrate that this idea is viable and allows for the computation of extremal unstable periodic orbits (UPOs) for polynomial ODE systems. First, we prove that polynomial optimization is guaranteed to produce auxiliary functions that yield near-sharp bounds on time averages, which is required in order to localize the extremal orbit accurately. Second, we show that points inside the relevant sublevel sets can be computed efficiently through direct nonlinear optimization. Such points provide good initial conditions for UPO computations. As a proof of concept, we then combine these methods with a single-shooting Newton-Raphson algorithm to study extremal UPOs for a nine-dimensional model of sinusoidally forced shear flow. We discover three previously unknown families of UPOs, one of which simultaneously minimizes the mean energy dissipation rate and maximizes the mean perturbation energy relative to the laminar state for Reynolds numbers approximately between 81.24 and 125.
Lattice Boltzmann methodology for unconfined flows
Numerical analysis of unconfined flow over an obstacle has always been challenging in computational fluid dynamics due to the truncation of the computational domain while replicating the real-life flows and the application of the boundary conditions. Confined flows studies have been well established and documented while unconfined flow studies are relatively challenging. Present work demonstrates the implementation of lattice Boltzmann method for unconfined flow over a circular cylinder for Re 100. The cylinder was placed at 10D upstream and 30D downstream and 10D from both the top and bottom walls. Different boundary conditions were implemented at the top and bottom walls to ensure unconfined flow. Drag and lift coefficients are also presented and were computed using the momentum exchange algorithm. Results are in complete agreement with the existing literature which demonstrate the capability of the solver.
An efficient Asymptotic-Preserving scheme for the Boltzmann mixture with disparate mass
In this paper, we develop and implement an efficient asymptotic-preserving (AP) scheme to solve the gas mixture of Boltzmann equations under the disparate mass scaling relevant to the so-called "epochal relaxation" phenomenon. The disparity in molecular masses, ranging across several orders of magnitude, leads to significant challenges in both the evaluation of collision operators and the designing of time-stepping schemes to capture the multi-scale nature of the dynamics. A direct implementation of the spectral method faces prohibitive computational costs as the mass ratio increases due to the need to resolve vastly different thermal velocities. Unlike [I. M. Gamba, S. Jin, and L. Liu, Commun. Math. Sci., 17 (2019), pp. 1257-1289], we propose an alternative approach based on proper truncation of asymptotic expansions of the collision operators, which significantly reduces the computational complexity and works well for small varepsilon. By incorporating the separation of three time scales in the model's relaxation process [P. Degond and B. Lucquin-Desreux, Math. Models Methods Appl. Sci., 6 (1996), pp. 405-436], we design an AP scheme that captures the specific dynamics of the disparate mass model while maintaining computational efficiency. Numerical experiments demonstrate the effectiveness of the proposed scheme in handling large mass ratios of heavy and light species, as well as capturing the epochal relaxation phenomenon.
Transition from decaying to decayless kink oscillations of solar coronal loops
The transition of an impulsively excited kink oscillation of a solar coronal loop to an oscillation with a stationary amplitude, i.e., the damping pattern, is determined using the low-dimensional self-oscillation model. In the model, the decayless kink oscillations are sustained by the interaction of the oscillating loop with an external quasi-steady flow. The analytical solution is based on the assumption that the combined effect of the effective dissipation, for example, by resonant absorption, and interaction with an external flow, is weak. The effect is characterised by a dimensionless coupling parameter. The damping pattern is found to depend upon the initial amplitude and the coupling parameter. The approximate expression shows a good agreement with a numerical solution of the self-oscillation equation. The plausibility of the established damping pattern is demonstrated by an observational example. Notably, the damping pattern is not exponential, and the characteristic decay time is different from the time determined by the traditionally used exponential damping fit. Implications of this finding for seismology of the solar coronal plasmas are discussed. In particular, it is suggested that a very rapid, in less than the oscillation period, decay of the oscillation to the stationary level, achieved for larger values of the coupling parameter, can explain the relative rareness of the kink oscillation events.
Ensemble Kalman Diffusion Guidance: A Derivative-free Method for Inverse Problems
When solving inverse problems, it is increasingly popular to use pre-trained diffusion models as plug-and-play priors. This framework can accommodate different forward models without re-training while preserving the generative capability of diffusion models. Despite their success in many imaging inverse problems, most existing methods rely on privileged information such as derivative, pseudo-inverse, or full knowledge about the forward model. This reliance poses a substantial limitation that restricts their use in a wide range of problems where such information is unavailable, such as in many scientific applications. To address this issue, we propose Ensemble Kalman Diffusion Guidance (EnKG) for diffusion models, a derivative-free approach that can solve inverse problems by only accessing forward model evaluations and a pre-trained diffusion model prior. We study the empirical effectiveness of our method across various inverse problems, including scientific settings such as inferring fluid flows and astronomical objects, which are highly non-linear inverse problems that often only permit black-box access to the forward model.
Acoustic prediction of flowrate: varying liquid jet stream onto a free surface
Information on liquid jet stream flow is crucial in many real world applications. In a large number of cases, these flows fall directly onto free surfaces (e.g. pools), creating a splash with accompanying splashing sounds. The sound produced is supplied by energy interactions between the liquid jet stream and the passive free surface. In this investigation, we collect the sound of a water jet of varying flowrate falling into a pool of water, and use this sound to predict the flowrate and flowrate trajectory involved. Two approaches are employed: one uses machine-learning models trained using audio features extracted from the collected sound to predict the flowrate (and subsequently the flowrate trajectory). In contrast, the second method directly uses acoustic parameters related to the spectral energy of the liquid-liquid interaction to estimate the flowrate trajectory. The actual flowrate, however, is determined directly using a gravimetric method: tracking the change in mass of the pooling liquid over time. We show here that the two methods agree well with the actual flowrate and offer comparable performance in accurately predicting the flowrate trajectory, and accordingly offer insights for potential real-life applications using sound.
AI Meets Turbulence Modeling: Complex Systems Perspective
Despite widespread enthusiasm, applying artificial intelligence and machine learning (AI/ML) to turbulence modeling has yielded only modest progress, primarily due to a lack of situation-aware deployment. Data-driven Reynolds-averaged Navier--Stokes (ML-RANS) closures frequently fail to generalize across diverse flow regimes, while scale-resolving simulations (SRS) remain computationally prohibitive. As a result, ML-RANS is often misapplied outside its domain of validity, and ML-SRS is unnecessarily deployed on flows fully amenable to RANS. To guide optimal AI/ML deployment, we propose a turbulence taxonomy map parameterized by degrees of freedom (Re) and the degree of non-equilibrium (SK/ε). By applying Weaver's well-recognized complexity framework, we classify turbulence into distinct physical regimes. This categorization identifies where local ML-RANS surrogates can generalize, clarifies where explicit scale resolution is physically mandatory, and highlights where physics-informed neural networks (PINNs) are most effective. Ultimately, this perspective establishes a physics-grounded framework for the flow-aware, successful deployment of AI/ML in turbulence.
Resistive thrust production can be as crucial as added mass mechanisms for inertial undulatory swimmers
In this paper, we address a crucial point regarding the description of moderate to high Reynolds numbers aquatic swimmers. For decades, swimming animals have been classified in two different families of propulsive mechanisms based on the Reynolds number: the "resistive" swimmers, using local friction to produce the necessary thrust force for locomotion at low Reynolds number and the "reactive" swimmers, lying in the high Reynolds range, and using added mass acceleration (described by perfect fluid theory). However, inertial swimmers are also systems that dissipate energy, due to their finite size, therefore involving strong resistive contributions, even for high Reynolds numbers. Using a complete model for the hydrodynamic forces, involving both reactive and resistive contributions, we revisit here the physical mechanisms responsible for the thrust production of such swimmers. We show, for instance, that the resistive part of the force balance is as crucial as added mass effects in the modeling of the thrust force, especially for elongated species. The conclusions brought by this work may have significant contributions to the understanding of complex swimming mechanisms, especially for the future design of artificial swimmers.
A low order divergence-free H(div)-conforming finite element method for Stokes flows
In this paper, we propose a { P_{1}^{c}}RT0-P0 discretization of the Stokes equations on general simplicial meshes in two/three dimensions (2D/3D), which yields an exactly divergence-free and pressure-independent velocity approximation with optimal order. Our method has the following features. Firstly, the global number of the degrees of freedom of our method is the same as the low order Bernardi and Raugel (B-R) finite element method (Bernardi and Raugel, 1985), while the number of {the non-zero entries} of the former is about half of the latter in the velocity-velocity region of the coefficient matrix. Secondly, the { P_{1}^{c}} component of the velocity, the RT0 component of the velocity and the pressure seem to solve a popular { P_{1}^{c}}-{RT0}-P0 discretization of a poroelastic-type system formally. Finally, our method can be easily transformed into a pressure-robust and stabilized { P_{1}^{c}}-P0 discretization for the Stokes problem via the static condensation of the RT0 component, which has a much smaller number of global degrees of freedom. Numerical experiments illustrating the robustness of our method are also provided.
Finite difference method in prolate spheroidal coordinates for freely suspended spheroidal particles in linear flows of viscous and viscoelastic fluids
A finite difference scheme is used to develop a numerical method to solve the flow of an unbounded viscoelastic fluid with zero to moderate inertia around a prolate spheroidal particle. The equations are written in prolate spheroidal coordinates, and the shape of the particle is exactly resolved as one of the coordinate surfaces representing the inner boundary of the computational domain. As the prolate spheroidal grid is naturally clustered near the particle surface, good resolution is obtained in the regions where the gradients of relevant flow variables are most significant. This coordinate system also allows large domain sizes with a reasonable number of mesh points to simulate unbounded fluid around a particle. Changing the aspect ratio of the inner computational boundary enables simulations of different particle shapes ranging from a sphere to a slender fiber. Numerical studies of the latter particle shape allow testing of slender body theories. The mass and momentum equations are solved with a Schur complement approach allowing us to solve the zero inertia case necessary to isolate the viscoelastic effects. The singularities associated with the coordinate system are overcome using L'Hopital's rule. A straightforward imposition of conditions representing a time-varying combination of linear flows on the outer boundary allows us to study various flows with the same computational domain geometry. {For the special but important case of zero fluid and particle inertia we obtain a novel formulation that satisfies the force- and torque-free constraint in an iteration-free manner.} The numerical method is demonstrated for various flows of Newtonian and viscoelastic fluids around spheres and spheroids (including those with large aspect ratio). Good agreement is demonstrated with existing theoretical and numerical results.
Analytical And Numerical Approximation of Effective Diffusivities in The Cytoplasm of Biological Cells
The simulation of the metabolism in mammalian cells becomes a severe problem if spatial distributions must be taken into account. Especially the cytoplasm has a very complex geometric structure which cannot be handled by standard discretization techniques. In the present paper we propose a homogenization technique for computing effective diffusion constants. This is accomplished by using a two-step strategy. The first step consists of an analytic homogenization from the smallest to an intermediate scale. The homogenization error is estimated by comparing the analytic diffusion constant with a numerical estimate obtained by using real cell geometries. The second step consists of a random homogenization. Since no analytical solution is known to this homogenization problem, a numerical approximation algorithm is proposed. Although rather expensive this algorithm provides a reasonable estimate of the homogenized diffusion constant.
Learning an Implicit Physics Model for Image-based Fluid Simulation
Humans possess an exceptional ability to imagine 4D scenes, encompassing both motion and 3D geometry, from a single still image. This ability is rooted in our accumulated observations of similar scenes and an intuitive understanding of physics. In this paper, we aim to replicate this capacity in neural networks, specifically focusing on natural fluid imagery. Existing methods for this task typically employ simplistic 2D motion estimators to animate the image, leading to motion predictions that often defy physical principles, resulting in unrealistic animations. Our approach introduces a novel method for generating 4D scenes with physics-consistent animation from a single image. We propose the use of a physics-informed neural network that predicts motion for each surface point, guided by a loss term derived from fundamental physical principles, including the Navier-Stokes equations. To capture appearance, we predict feature-based 3D Gaussians from the input image and its estimated depth, which are then animated using the predicted motions and rendered from any desired camera perspective. Experimental results highlight the effectiveness of our method in producing physically plausible animations, showcasing significant performance improvements over existing methods. Our project page is https://physfluid.github.io/ .
Physics-Informed Diffusion Models
Generative models such as denoising diffusion models are quickly advancing their ability to approximate highly complex data distributions. They are also increasingly leveraged in scientific machine learning, where samples from the implied data distribution are expected to adhere to specific governing equations. We present a framework that unifies generative modeling and partial differential equation fulfillment by introducing a first-principle-based loss term that enforces generated samples to fulfill the underlying physical constraints. Our approach reduces the residual error by up to two orders of magnitude compared to previous work in a fluid flow case study and outperforms task-specific frameworks in relevant metrics for structural topology optimization. We also present numerical evidence that our extended training objective acts as a natural regularization mechanism against overfitting. Our framework is simple to implement and versatile in its applicability for imposing equality and inequality constraints as well as auxiliary optimization objectives.
BCAT: A Block Causal Transformer for PDE Foundation Models for Fluid Dynamics
We introduce BCAT, a PDE foundation model designed for autoregressive prediction of solutions to two dimensional fluid dynamics problems. Our approach uses a block causal transformer architecture to model next frame predictions, leveraging previous frames as contextual priors rather than relying solely on sub-frames or pixel-based inputs commonly used in image generation methods. This block causal framework more effectively captures the spatial dependencies inherent in nonlinear spatiotemporal dynamics and physical phenomena. In an ablation study, next frame prediction demonstrated a 3.5x accuracy improvement over next token prediction. BCAT is trained on a diverse range of fluid dynamics datasets, including incompressible and compressible Navier-Stokes equations across various geometries and parameter regimes, as well as the shallow-water equations. The model's performance was evaluated on 6 distinct downstream prediction tasks and tested on about 8K trajectories to measure robustness on a variety of fluid dynamics simulations. BCAT achieved an average relative error of 1.18% across all evaluation tasks, outperforming prior approaches on standard benchmarks. With fine-tuning on a turbulence dataset, we show that the method adapts to new settings with more than 40% better accuracy over prior methods.
Efficient Generation of Multimodal Fluid Simulation Data
In this work, we introduce an efficient generation procedure to produce synthetic multi-modal datasets of fluid simulations. The procedure can reproduce the dynamics of fluid flows and allows for exploring and learning various properties of their complex behavior, from distinct perspectives and modalities. We employ our framework to generate a set of thoughtfully designed training datasets, which attempt to span specific fluid simulation scenarios in a meaningful way. The properties of our contributions are demonstrated by evaluating recently published algorithms for the neural fluid simulation and fluid inverse rendering tasks using our benchmark datasets. Our contribution aims to fulfill the community's need for standardized training data, fostering more reproducibile and robust research.
EuLagNet: Eulerian Fluid Prediction with Lagrangian Dynamics
Accurately predicting the future fluid is important to extensive areas, such as meteorology, oceanology and aerodynamics. However, since the fluid is usually observed from an Eulerian perspective, its active and intricate dynamics are seriously obscured and confounded in static grids, bringing horny challenges to the prediction. This paper introduces a new Lagrangian-guided paradigm to tackle the tanglesome fluid dynamics. Instead of solely predicting the future based on Eulerian observations, we propose the Eulerian-Lagrangian Dual Recurrent Network (EuLagNet), which captures multiscale fluid dynamics by tracking movements of adaptively sampled key particles on multiple scales and integrating dynamics information over time. Concretely, a EuLag Block is presented to communicate the learned Eulerian and Lagrangian features at each moment and scale, where the motion of tracked particles is inferred from Eulerian observations and their accumulated dynamics information is incorporated into Eulerian fields to guide future prediction. Tracking key particles not only provides a clear and interpretable clue for fluid dynamics but also makes our model free from modeling complex correlations among massive grids for better efficiency. Experimentally, EuLagNet excels in three challenging fluid prediction tasks, covering both 2D and 3D, simulated and real-world fluids.
Boundary Element and Finite Element Coupling for Aeroacoustics Simulations
We consider the scattering of acoustic perturbations in a presence of a flow. We suppose that the space can be split into a zone where the flow is uniform and a zone where the flow is potential. In the first zone, we apply a Prandtl-Glauert transformation to recover the Helmholtz equation. The well-known setting of boundary element method for the Helmholtz equation is available. In the second zone, the flow quantities are space dependent, we have to consider a local resolution, namely the finite element method. Herein, we carry out the coupling of these two methods and present various applications and validation test cases. The source term is given through the decomposition of an incident acoustic field on a section of the computational domain's boundary.
A Dynamical Low-rank Multilevel Monte Carlo Estimator for High-Dimensional Kinetic Equations
Kinetic equations are used to model a wide range of phenomena important for real-world applications. Their applications span astrophysics, nuclear physics, engineering, and social sciences. Due to their high-dimensional phase space, modelling and quantifying uncertainties, relevant for applications, poses a significant challenge even for modern computing infrastructure. In recent years, dynamical low-rank approximation (DLRA) has gained popularity for making fine grid simulations of high-dimensional problems feasible by evolving the solution of a time-dependent PDE as a low-rank factorization. This reduces the computational and memory requirements significantly. In this work, we propose a low-rank multilevel Monte Carlo estimator for kinetic equations based on a probabilistic rank-adaptive DLRA time integrator. The level hierarchy of the low-rank multilevel estimator is constructed through spatial refinement and by ensuring that the low-rank error remains below the spatial discretization error. We demonstrate the efficacy of the estimator through several numerical experiments from radiation transport, radiation therapy, and shallow water flow.
PEGNet: A Physics-Embedded Graph Network for Long-Term Stable Multiphysics Simulation
Accurate and efficient simulations of physical phenomena governed by partial differential equations (PDEs) are important for scientific and engineering progress. While traditional numerical solvers are powerful, they are often computationally expensive. Recently, data-driven methods have emerged as alternatives, but they frequently suffer from error accumulation and limited physical consistency, especially in multiphysics and complex geometries. To address these challenges, we propose PEGNet, a Physics-Embedded Graph Network that incorporates PDE-guided message passing to redesign the graph neural network architecture. By embedding key PDE dynamics like convection, viscosity, and diffusion into distinct message functions, the model naturally integrates physical constraints into its forward propagation, producing more stable and physically consistent solutions. Additionally, a hierarchical architecture is employed to capture multi-scale features, and physical regularization is integrated into the loss function to further enforce adherence to governing physics. We evaluated PEGNet on benchmarks, including custom datasets for respiratory airflow and drug delivery, showing significant improvements in long-term prediction accuracy and physical consistency over existing methods. Our code is available at https://github.com/Yanghuoshan/PEGNet.
Deterministic diffusion models for Lagrangian turbulence: robustness and encoding of extreme events
Modeling Lagrangian turbulence remains a fundamental challenge due to its multiscale, intermittent, and non-Gaussian nature. Recent advances in data-driven diffusion models have enabled the generation of realistic Lagrangian velocity trajectories that accurately reproduce statistical properties across scales and capture rare extreme events. This study investigates three key aspects of diffusion-based modeling for Lagrangian turbulence. First, we assess architectural robustness by comparing a U-Net backbone with a transformer-based alternative, finding strong consistency in generated trajectories, with only minor discrepancies at small scales. Second, leveraging a deterministic variant of diffusion model formulation, namely the deterministic denoising diffusion implicit model (DDIM), we identify structured features in the initial latent noise that align consistently with extreme acceleration events. Third, we explore accelerated generation by reducing the number of diffusion steps, and find that DDIM enables substantial speedups with minimal loss of statistical fidelity. These findings highlight the robustness of diffusion models and their potential for interpretable, scalable modeling of complex turbulent systems.
Steady-State Phase Transition States and Large-Time Asymptotics for the Cauchy Problem of Compressible Navier-Stokes Equations with van der Waals Equation of State
We study the Cauchy problem for the one-dimensional isothermal compressible Navier--Stokes system with the van der Waals equation of state, and analyze the well-posedness and asymptotic stability of steady-state phase-transition solutions at subcritical temperatures. Working in Lagrangian coordinates, we use variational techniques to construct piecewise smooth steady-state solutions corresponding to two-phase equilibrium states under finite-mass perturbations. Introducing artificial-viscosity regularization, we first establish existence of the global minimizer of the regularized variational problem, unique within each fixed symmetry class; passing to the vanishing artificial-viscosity limit then yields a physically admissible steady-state solution with two phase interfaces. For initial perturbations that are small with respect to energy, piecewise-gradient, total-variation, and integral norms but may exhibit large pointwise jumps across phase boundaries, we derive uniform a priori bounds for weak solutions near the two-phase equilibrium profile. We further prove that these global weak solutions converge to the steady-state two-phase equilibrium in L^infty(R) as ttoinfty, thereby characterizing their large-time asymptotic behavior. Physically, finite mass perturbations break the uniqueness of the uniform steady state and generate infinitely many piecewise constant two-phase equilibria satisfying the Maxwell equal-area rule. Artificial viscosity acts as a selection principle that singles out the physically relevant two-interface steady-state configuration, and this two-phase equilibrium is asymptotically stable under small integral perturbations that allow large-amplitude discontinuities at phase interfaces.
Flow Perturbation to Accelerate Unbiased Sampling of Boltzmann distribution
Flow-based generative models have been employed for sampling the Boltzmann distribution, but their application to high-dimensional systems is hindered by the significant computational cost of obtaining the Jacobian of the flow. To overcome this challenge, we introduce the flow perturbation method, which incorporates optimized stochastic perturbations into the flow. By reweighting trajectories generated by the perturbed flow, our method achieves unbiased sampling of the Boltzmann distribution with orders of magnitude speedup compared to both brute force Jacobian calculations and the Hutchinson estimator. Notably, it accurately sampled the Chignolin protein with all atomic Cartesian coordinates explicitly represented, which, to our best knowledge, is the largest molecule ever Boltzmann sampled in such detail using generative models.
Momentum Guidance: Plug-and-Play Guidance for Flow Models
Flow-based generative models have become a strong framework for high-quality generative modeling, yet pretrained models are rarely used in their vanilla conditional form: conditional samples without guidance often appear diffuse and lack fine-grained detail due to the smoothing effects of neural networks. Existing guidance techniques such as classifier-free guidance (CFG) improve fidelity but double the inference cost and typically reduce sample diversity. We introduce Momentum Guidance (MG), a new dimension of guidance that leverages the ODE trajectory itself. MG extrapolates the current velocity using an exponential moving average of past velocities and preserves the standard one-evaluation-per-step cost. It matches the effect of standard guidance without extra computation and can further improve quality when combined with CFG. Experiments demonstrate MG's effectiveness across benchmarks. Specifically, on ImageNet-256, MG achieves average improvements in FID of 36.68% without CFG and 25.52% with CFG across various sampling settings, attaining an FID of 1.597 at 64 sampling steps. Evaluations on large flow-based models like Stable Diffusion 3 and FLUX.1-dev further confirm consistent quality enhancements across standard metrics.
Compactly Supported Strong Ill-Posedness of the Two-Dimensional Euler Flow in W^{3,1}(mathbb R^2)
We prove strong ill-posedness for the two-dimensional incompressible Euler equation in the endpoint velocity space W^{3,1}_σ(mathbb R^2). Given any compactly supported smooth divergence-free background and any δ>0, we construct a single compactly supported divergence-free datum within δ of the background in W^{3,1}. The perturbation can be localized inside any prescribed nonempty open neighborhood of the background support while remaining disjoint from that support. The associated unique global finite-energy solution u satisfies {rm curl} uin C([0,infty);W^{2,1}(mathbb R^2)), but \[ \operatorname*{ess\,sup}_{0<t<T}\|u(t)\|_{W^{3,1}}=\infty \qquadfor every T>0. \] The proof combines localized hyperbolic insertion, the Bonami--Poornima nonmultiplier mechanism, and many-packet dilution. Moment cancellation and positive material separation control the nonlocal Biot--Savart interactions, allowing a nested construction inside one fixed compact region. Without the compact-support requirement on the limiting datum, a complementary far-field argument yields a dense G_δ set of data whose solutions leave W^{3,1} at every positive rational time and on a residual set of times, with unbounded essential supremum on every nonempty open time interval.
Learning Flexible Body Collision Dynamics with Hierarchical Contact Mesh Transformer
Recently, many mesh-based graph neural network (GNN) models have been proposed for modeling complex high-dimensional physical systems. Remarkable achievements have been made in significantly reducing the solving time compared to traditional numerical solvers. These methods are typically designed to i) reduce the computational cost in solving physical dynamics and/or ii) propose techniques to enhance the solution accuracy in fluid and rigid body dynamics. However, it remains under-explored whether they are effective in addressing the challenges of flexible body dynamics, where instantaneous collisions occur within a very short timeframe. In this paper, we present Hierarchical Contact Mesh Transformer (HCMT), which uses hierarchical mesh structures and can learn long-range dependencies (occurred by collisions) among spatially distant positions of a body -- two close positions in a higher-level mesh correspond to two distant positions in a lower-level mesh. HCMT enables long-range interactions, and the hierarchical mesh structure quickly propagates collision effects to faraway positions. To this end, it consists of a contact mesh Transformer and a hierarchical mesh Transformer (CMT and HMT, respectively). Lastly, we propose a flexible body dynamics dataset, consisting of trajectories that reflect experimental settings frequently used in the display industry for product designs. We also compare the performance of several baselines using well-known benchmark datasets. Our results show that HCMT provides significant performance improvements over existing methods. Our code is available at https://github.com/yuyudeep/hcmt.
Evolution of spherical cavitation bubbles: parametric and closed-form solutions
We present an analysis of the Rayleigh-Plesset equation for a three dimensional vacuous bubble in water. In the simplest case when the effects of surface tension are neglected, the known parametric solutions for the radius and time evolution of the bubble in terms of a hypergeometric function are briefly reviewed. By including the surface tension, we show the connection between the Rayleigh-Plesset equation and Abel's equation, and obtain the parametric rational Weierstrass periodic solutions following the Abel route. In the same Abel approach, we also provide a discussion of the nonintegrable case of nonzero viscosity for which we perform a numerical integration
TIDE: A Physically Diverse 3D Turbulence Benchmark Dataset for Advancing Scientific Machine Learning
Turbulence is a central testbed for machine learning on physical dynamics because its governing laws are known exactly. However, most existing studies remain in 2D, while 3D turbulence has fundamentally different physics and is far more costly to simulate. Existing 3D resources also typically provide only one realization per configuration, making it difficult to distinguish learning the dynamics from fitting the statistics of a single flow. In this paper, we introduce TIDE (Turbulent Incompressible DNS Ensembles), a 256^3 DNS corpus and benchmark for 3D incompressible turbulence, with 15 configurations on eight controlled axes, independent ensembles, pressure fields, and equation-level verification. The benchmark includes five tasks, standardized learned baselines, controlled generalization splits, and physical-fidelity metrics alongside pointwise error. Across the main forecasting configurations, current learned models barely outperform persistence and still make about twice the error of a spectral solver given the true equations. Moreover, lower pointwise error can coincide with severely distorted small-scale dynamics, showing that accuracy alone does not ensure physical fidelity. Generalization results further show that most regime shifts reflect limited training coverage, whereas forced-to-decay transfer exposes a missing conditioning variable: operators trained under forcing continue to predict driven evolution when the external drive is removed. Closing these accuracy, fidelity, and conditioning gaps is the central open problem made measurable by TIDE.
Message Passing Neural PDE Solvers
The numerical solution of partial differential equations (PDEs) is difficult, having led to a century of research so far. Recently, there have been pushes to build neural--numerical hybrid solvers, which piggy-backs the modern trend towards fully end-to-end learned systems. Most works so far can only generalize over a subset of properties to which a generic solver would be faced, including: resolution, topology, geometry, boundary conditions, domain discretization regularity, dimensionality, etc. In this work, we build a solver, satisfying these properties, where all the components are based on neural message passing, replacing all heuristically designed components in the computation graph with backprop-optimized neural function approximators. We show that neural message passing solvers representationally contain some classical methods, such as finite differences, finite volumes, and WENO schemes. In order to encourage stability in training autoregressive models, we put forward a method that is based on the principle of zero-stability, posing stability as a domain adaptation problem. We validate our method on various fluid-like flow problems, demonstrating fast, stable, and accurate performance across different domain topologies, equation parameters, discretizations, etc., in 1D and 2D.
LESnets (Large-Eddy Simulation nets): Physics-informed neural operator for large-eddy simulation of turbulence
Acquisition of large datasets for three-dimensional (3D) partial differential equations are usually very expensive. Physics-informed neural operator (PINO) eliminates the high costs associated with generation of training datasets, and shows great potential in a variety of partial differential equations. In this work, we employ physics-informed neural operator, encoding the large-eddy simulation (LES) equations directly into the neural operator for simulating three-dimensional incompressible turbulent flows. We develop the LESnets (Large-Eddy Simulation nets) by adding large-eddy simulation equations to two different data-driven models, including Fourier neural operator (FNO) and implicit Fourier neural operator (IFNO) without using label data. Notably, by leveraging only PDE constraints to learn the spatio-temporal dynamics problem, LESnets retains the computational efficiency of data-driven approaches while obviating the necessity for data. Meanwhile, using large-eddy simulation equations as PDE constraints makes it possible to efficiently predict complex turbulence at coarse grids. We investigate the performance of the LESnets with two standard three-dimensional turbulent flows: decaying homogeneous isotropic turbulence and temporally evolving turbulent mixing layer. In the numerical experiments, the LESnets model shows a similar or even better accuracy as compared to traditional large-eddy simulation and data-driven models of FNO and IFNO. Moreover, the well-trained LESnets is significantly faster than traditional LES, and has a similar efficiency as the data-driven FNO and IFNO models. Thus, physics-informed neural operators have a strong potential for 3D nonlinear engineering applications.
FISC: A Fluid-Inspired Framework for Decentralized and Scalable Swarm Control
Achieving scalable coordination in large robotic swarms is often constrained by reliance on inter-agent communication, which introduces latency, bandwidth limitations, and vulnerability to failure. To address this gap, a decentralized approach for outer-loop control of large multi-agent systems based on the paradigm of how a fluid moves through a volume is proposed and evaluated. A relationship between fundamental fluidic element properties and individual robotic agent states is developed such that the corresponding swarm "flows" through a space, akin to a fluid when forced via a pressure boundary condition. By ascribing fluid-like properties to subsets of agents, the swarm evolves collectively while maintaining desirable structure and coherence without explicit communication of agent states within or outside of the swarm. The approach is evaluated using simulations involving O(10^3) quadcopter agents and compared against Computational Fluid Dynamics (CFD) solutions for a converging-diverging domain. Quantitative agreement between swarm-derived and CFD fields is assessed using Root-Mean-Square Error (RMSE), yielding normalized errors of 0.15-0.9 for velocity, 0.61-0.98 for density, 0-0.937 for pressure. These results demonstrate the feasibility of treating large robotic swarms as continuum systems that retain the macroscopic structure derived from first principles, providing a basis for scalable and decentralized control.
kh2d-solver: A Python Library for Idealized Two-Dimensional Incompressible Kelvin-Helmholtz Instability
We present an open-source Python library for simulating two-dimensional incompressible Kelvin-Helmholtz instabilities in stratified shear flows. The solver employs a fractional-step projection method with spectral Poisson solution via Fast Sine Transform, achieving second-order spatial accuracy. Implementation leverages NumPy, SciPy, and Numba JIT compilation for efficient computation. Four canonical test cases explore Reynolds numbers 1000--5000 and Richardson numbers 0.1--0.3: classical shear layer, double shear configuration, rotating flow, and forced turbulence. Statistical analysis using Shannon entropy and complexity indices reveals that double shear layers achieve 2.8times higher mixing rates than forced turbulence despite lower Reynolds numbers. The solver runs efficiently on standard desktop hardware, with 384times192 grid simulations completing in approximately 31 minutes. Results demonstrate that mixing efficiency depends on instability generation pathways rather than intensity measures alone, challenging Richardson number-based parameterizations and suggesting refinements for subgrid-scale representation in climate models.
Evaluation of Deep Neural Operator Models toward Ocean Forecasting
Data-driven, deep-learning modeling frameworks have been recently developed for forecasting time series data. Such machine learning models may be useful in multiple domains including the atmospheric and oceanic ones, and in general, the larger fluids community. The present work investigates the possible effectiveness of such deep neural operator models for reproducing and predicting classic fluid flows and simulations of realistic ocean dynamics. We first briefly evaluate the capabilities of such deep neural operator models when trained on a simulated two-dimensional fluid flow past a cylinder. We then investigate their application to forecasting ocean surface circulation in the Middle Atlantic Bight and Massachusetts Bay, learning from high-resolution data-assimilative simulations employed for real sea experiments. We confirm that trained deep neural operator models are capable of predicting idealized periodic eddy shedding. For realistic ocean surface flows and our preliminary study, they can predict several of the features and show some skill, providing potential for future research and applications.
Loss of Uniform Convergence for Solutions of the Navier--Stokes Equations in the Inviscid Limit
In this paper, we consider the inviscid limit problem to the higher dimensional incompressible Navier--Stokes equations in the whole space. It is shown in [Guo, Li, Yin: J. Funct. Anal., 276 (2019)] that given initial data u_0in B^{s}_{p,r} and for some T>0, the solutions of the Navier--Stokes equations converge strongly in L^infty_TB^{s}_{p,r} to the Euler equations as the viscosity parameter tends to zero. We furthermore prove the failure of the uniform (with respect to the initial data) B^{s}_{p,r} convergence in the inviscid limit of a family of solutions of the Navier-Stokes equations towards a solution of the Euler equations.
Momentum transfer in the outflow cycle of a Synthetic jet: Comparison between a developed flow and an LE model
In the literature, flows produced by synthetic jets (SJ) have been studied extensively through experiments and numeric simulations. The essential physics of such a complex system has been simplified successfully to Lumped-element models in a wide range of conditions. LE models effectively predict the pressure in the cavity and the velocity in the neck of SJ. But, this does not comprise the complete dynamics of SJ. As soon as the flow starts separating from the neck of the SJ device, vortices and jets form at some distance downstream. These structures are the result of loosening the flow boundaries. Despite such a dramatic change, predictions of LE models remain unverified by measurements of the fully developed jet. We compared predictions of momentum transfer using an LE model with measurements of size and velocity of a fully developed jet/vortex detached from an SJ. Our SJ device operated with air as an active fluid. Comparing measurements and predictions, we found a constant difference for the higher sound pressures. However, the predictions and the measurements follow similar trends. Additionally, we found that the decay rate of the flow regime given by the relationship between the Reynolds and the Strouhal numbers differs significantly when the flow is studied within the neck and downstream the cavity.
Nonlinear stability of 3D Couette flow on mathbb Ttimesmathbb R^2 under critical transverse low-frequency control
We establish nonlinear stability of three-dimensional Couette flow for the incompressible Navier--Stokes equations on mathbb Ttimesmathbb R^2. Divergence-free perturbations satisfying |u_{rm in}|_{H^2}+|u^perp_{0,rm in}|_{dot B^{-2}_{2,infty}}leq c_*ν generate unique global H^2 solutions that remain close to Couette flow, where u^perp_{0,rm in} denotes the streamwise average of the transverse velocity. This result retains the O(ν) stability threshold despite the absence of a spanwise spectral gap. The nonzero streamwise modes exhibit enhanced dissipation, their wall-normal component satisfies a viscosity-uniform time-integrated inviscid-damping estimate, and the transverse zero mode decays in L^2 at rate (1+νt)^{-1}. The endpoint space dot B^{-2}_{2,infty} controls the transverse low frequencies, accommodates divergence-form nonlinear forcing, and is critical for linear lift-up from the wall-normal zero mode. The proof combines propagation of this endpoint norm, Fourier splitting, and a two-level roll-to-streak representation with an adaptation of the nonzero-mode framework of Wei--Zhang (CPAM, 2021).
Uncertainty Quantification for Multi-fidelity Simulations
The work focuses on gathering high-fidelity and low-fidelity numerical simulations data using Nektar++ (Solver based on Applied Mathematics) and XFOIL respectively. The utilization of the higher polynomial distribution in calculating the Coefficient of lift and drag has demonstrated superior accuracy and precision. Further, Co-kriging Data fusion and Adaptive sampling technique has been used to obtain the precise data predictions for the lift and drag within the confined domain without conducting the costly simulations on HPC clusters. This creates a methodology to quantifying uncertainty in computational fluid dynamics by minimizing the required number of samples. To minimize the reliability on high-fidelity numerical simulations in Uncertainty Quantification, a multi-fidelity strategy has been adopted. The effectiveness of the multi-fidelity deep neural network model has been validated through the approximation of benchmark functions across 1-, 32-, and 100-dimensional, encompassing both linear and nonlinear correlations. The surrogate modelling results showed that multi-fidelity deep neural network model has shown excellent approximation capabilities for the test functions and multi-fidelity deep neural network method has outperformed Co-kriging in effectiveness. In addition to that, multi-fidelity deep neural network model is utilized for the simulation of aleatory uncertainty propagation in 1-, 32-, and 100 dimensional function test, considering both uniform and Gaussian distributions for input uncertainties. The results have shown that multi-fidelity deep neural network model has efficiently predicted the probability density distributions of quantities of interest as well as the statistical moments with precision and accuracy. The Co-Kriging model has exhibited limitations when addressing 32-Dimension problems due to the limitation of memory capacity for storage and manipulation.
Improving Rectified Flow with Boundary Conditions
Rectified Flow offers a simple and effective approach to high-quality generative modeling by learning a velocity field. However, we identify a limitation in directly modeling the velocity with an unconstrained neural network: the learned velocity often fails to satisfy certain boundary conditions, leading to inaccurate velocity field estimations that deviate from the desired ODE. This issue is particularly critical during stochastic sampling at inference, as the score function's errors are amplified near the boundary. To mitigate this, we propose a Boundary-enforced Rectified Flow Model (Boundary RF Model), in which we enforce boundary conditions with a minimal code modification. Boundary RF Model improves performance over vanilla RF model, demonstrating 8.01% improvement in FID score on ImageNet using ODE sampling and 8.98% improvement using SDE sampling.
Mean Flows for One-step Generative Modeling
We propose a principled and effective framework for one-step generative modeling. We introduce the notion of average velocity to characterize flow fields, in contrast to instantaneous velocity modeled by Flow Matching methods. A well-defined identity between average and instantaneous velocities is derived and used to guide neural network training. Our method, termed the MeanFlow model, is self-contained and requires no pre-training, distillation, or curriculum learning. MeanFlow demonstrates strong empirical performance: it achieves an FID of 3.43 with a single function evaluation (1-NFE) on ImageNet 256x256 trained from scratch, significantly outperforming previous state-of-the-art one-step diffusion/flow models. Our study substantially narrows the gap between one-step diffusion/flow models and their multi-step predecessors, and we hope it will motivate future research to revisit the foundations of these powerful models.
Integrating Neural Operators with Diffusion Models Improves Spectral Representation in Turbulence Modeling
We integrate neural operators with diffusion models to address the spectral limitations of neural operators in surrogate modeling of turbulent flows. While neural operators offer computational efficiency, they exhibit deficiencies in capturing high-frequency flow dynamics, resulting in overly smooth approximations. To overcome this, we condition diffusion models on neural operators to enhance the resolution of turbulent structures. Our approach is validated for different neural operators on diverse datasets, including a high Reynolds number jet flow simulation and experimental Schlieren velocimetry. The proposed method significantly improves the alignment of predicted energy spectra with true distributions compared to neural operators alone. This enables the diffusion models to stabilize longer forecasts through diffusion-corrected autoregressive rollouts, as we demonstrate in this work. Additionally, proper orthogonal decomposition analysis demonstrates enhanced spectral fidelity in space-time. This work establishes a new paradigm for combining generative models with neural operators to advance surrogate modeling of turbulent systems, and it can be used in other scientific applications that involve microstructure and high-frequency content. See our project page: vivekoommen.github.io/NO_DM
Momentum-based minimization of the Ginzburg-Landau functional on Euclidean spaces and graphs
We study the momentum-based minimization of a diffuse perimeter functional on Euclidean spaces and on graphs with applications to semi-supervised classification tasks in machine learning. While the gradient flow in the task at hand is a parabolic partial differential equation, the momentum-method corresponds to a damped hyperbolic PDE, leading to qualitatively and quantitatively different trajectories. Using a convex-concave splitting-based FISTA-type time discretization, we demonstrate empirically that momentum can lead to faster convergence if the time step size is large but not too large. With large time steps, the PDE analysis offers only limited insight into the geometric behavior of solutions and typical hyperbolic phenomena like loss of regularity are not be observed in sample simulations.
SPIKE: Sparse Koopman Regularization for Physics-Informed Neural Networks
Physics-Informed Neural Networks (PINNs) provide a mesh-free approach for solving differential equations by embedding physical constraints into neural network training. However, PINNs tend to overfit within the training domain, leading to poor generalization when extrapolating beyond trained spatiotemporal regions. This work presents SPIKE (Sparse Physics-Informed Koopman-Enhanced), a framework that regularizes PINNs with continuous-time Koopman operators to learn parsimonious dynamics representations. By enforcing linear dynamics dz/dt = Az in a learned observable space, both PIKE (without explicit sparsity) and SPIKE (with L1 regularization on A) learn sparse generator matrices, embodying the parsimony principle that complex dynamics admit low-dimensional structure. Experiments across parabolic, hyperbolic, dispersive, and stiff PDEs, including fluid dynamics (Navier-Stokes) and chaotic ODEs (Lorenz), demonstrate consistent improvements in temporal extrapolation, spatial generalization, and long-term prediction accuracy. The continuous-time formulation with matrix exponential integration provides unconditional stability for stiff systems while avoiding diagonal dominance issues inherent in discrete-time Koopman operators.
Gradient Flow Through Diagram Expansions: Learning Regimes and Explicit Solutions
We develop a general mathematical framework to analyze scaling regimes and derive explicit analytic solutions for gradient flow (GF) in large learning problems. Our key innovation is a formal power series expansion of the loss evolution, with coefficients encoded by diagrams akin to Feynman diagrams. We show that this expansion has a well-defined large-size limit that can be used to reveal different learning phases and, in some cases, to obtain explicit solutions of the nonlinear GF. We focus on learning Canonical Polyadic (CP) decompositions of high-order tensors, and show that this model has several distinct extreme lazy and rich GF regimes such as free evolution, NTK and under- and over-parameterized mean-field. We show that these regimes depend on the parameter scaling, tensor order, and symmetry of the model in a specific and subtle way. Moreover, we propose a general approach to summing the formal loss expansion by reducing it to a PDE; in a wide range of scenarios, it turns out to be first-order and solvable by the method of characteristics. We observe a very good agreement of our theoretical predictions with experimental results.
TENG: Time-Evolving Natural Gradient for Solving PDEs With Deep Neural Nets Toward Machine Precision
Partial differential equations (PDEs) are instrumental for modeling dynamical systems in science and engineering. The advent of neural networks has initiated a significant shift in tackling these complexities though challenges in accuracy persist, especially for initial value problems. In this paper, we introduce the Time-Evolving Natural Gradient (TENG), generalizing time-dependent variational principles and optimization-based time integration, leveraging natural gradient optimization to obtain high accuracy in neural-network-based PDE solutions. Our comprehensive development includes algorithms like TENG-Euler and its high-order variants, such as TENG-Heun, tailored for enhanced precision and efficiency. TENG's effectiveness is further validated through its performance, surpassing current leading methods and achieving machine precision in step-by-step optimizations across a spectrum of PDEs, including the heat equation, Allen-Cahn equation, and Burgers' equation.
Stable by Construction: Variational Latent Markov Operators for Long-Horizon PDE Prediction
Neural PDE solvers provide efficient surrogates for time-dependent physical systems, but autoregressive prediction over long horizons remains challenging because local errors can induce distribution shift and accumulate under recursive deployment. We develop a variational approach to this problem by introducing latent Markov dynamics in which physical states are represented by latent distributions and evolved through probabilistic transitions. The framework is formulated directly on function spaces and specialized to functional Gaussian models, where structured latent perturbations induce a spectral geometry and variational transition alignment regularizes the learned dynamics. We further analyze how these mechanisms affect autoregressive error propagation, providing a theoretical connection between variational training and long-horizon prediction. We instantiate the framework as the Variational Autoencoding Markov Operator (VAMO), which combines spatially resolved latent fields, structured Gaussian perturbations, and a neural-operator transition. Empirically, we demonstrate the effectiveness of VAMO on several fluid-dynamics benchmarks with prediction horizons extending substantially beyond those represented during training, where it consistently reduces error accumulation and improves rollout stability over several deterministic and noise-injection baselines. Overall, these results highlight variational modeling as a complementary approach to robust long-horizon neural PDE dynamics.
Coupled BEM-FEM for the convected Helmholtz equation with non-uniform flow in a bounded domain
We consider the convected Helmholtz equation modeling linear acoustic propagation at a fixed frequency in a subsonic flow around a scattering object. The flow is supposed to be uniform in the exterior domain far from the object, and potential in the interior domain close to the object. Our key idea is the reformulation of the original problem using the Prandtl--Glauert transformation on the whole flow domain, yielding (i) the classical Helmholtz equation in the exterior domain and (ii) an anisotropic diffusive PDE with skew-symmetric first-order perturbation in the interior domain such that its transmission condition at the coupling boundary naturally fits the Neumann condition from the classical Helmholtz equation. Then, efficient off-the-shelf tools can be used to perform the BEM-FEM coupling, leading to two novel variational formulations for the convected Helmholtz equation. The first formulation involves one surface unknown and can be affected by resonant frequencies, while the second formulation avoids resonant frequencies and involves two surface unknowns. Numerical simulations are presented to compare the two formulations.
Rectified Flow: A Marginal Preserving Approach to Optimal Transport
We present a flow-based approach to the optimal transport (OT) problem between two continuous distributions pi_0,pi_1 on R^d, of minimizing a transport cost E[c(X_1-X_0)] in the set of couplings (X_0,X_1) whose marginal distributions on X_0,X_1 equals pi_0,pi_1, respectively, where c is a cost function. Our method iteratively constructs a sequence of neural ordinary differentiable equations (ODE), each learned by solving a simple unconstrained regression problem, which monotonically reduce the transport cost while automatically preserving the marginal constraints. This yields a monotonic interior approach that traverses inside the set of valid couplings to decrease the transport cost, which distinguishes itself from most existing approaches that enforce the coupling constraints from the outside. The main idea of the method draws from rectified flow, a recent approach that simultaneously decreases the whole family of transport costs induced by convex functions c (and is hence multi-objective in nature), but is not tailored to minimize a specific transport cost. Our method is a single-object variant of rectified flow that guarantees to solve the OT problem for a fixed, user-specified convex cost function c.
On the Dynamics of Acceleration in First order Gradient Methods
Ever since the original algorithm by Nesterov (1983), the true nature of the acceleration phenomenon has remained elusive, with various interpretations of why the method is actually faster. The diagnosis of the algorithm through the lens of Ordinary Differential Equations (ODEs) and the corresponding dynamical system formulation to explain the underlying dynamics has a rich history. In the literature, the ODEs that explain algorithms are typically derived by considering the limiting case of the algorithm maps themselves, that is, an ODE formulation follows the development of an algorithm. This obfuscates the underlying higher order principles and thus provides little evidence of the working of the algorithm. Such has been the case with Nesterov algorithm and the various analogies used to describe the acceleration phenomena, viz, momentum associated with the rolling of a Heavy-Ball down a slope, Hessian damping etc. The main focus of our work is to ideate the genesis of the Nesterov algorithm from the viewpoint of dynamical systems leading to demystifying the mathematical rigour behind the algorithm. Instead of reverse engineering ODEs from discrete algorithms, this work explores tools from the recently developed control paradigm titled Passivity and Immersion approach and the Geometric Singular Perturbation theory which are applied to arrive at the formulation of a dynamical system that explains and models the acceleration phenomena. This perspective helps to gain insights into the various terms present and the sequence of steps used in Nesterovs accelerated algorithm for the smooth strongly convex and the convex case. The framework can also be extended to derive the acceleration achieved using the triple momentum method and provides justifications for the non-convergence to the optimal solution in the Heavy-Ball method.
Nonlinear dynamics of a chemically-active drop: from steady to chaotic self-propulsion
Individual chemically active drops suspended in a surfactant solution were observed to self-propel spontaneously with straight, helical, or chaotic trajectories. To elucidate how these drops can exhibit such strikingly different dynamics and `decide' what to do, we propose a minimal axisymmetric model of a spherical active drop, and show that simple and linear interface properties can lead to both steady self-propulsion of the droplet as well as chaotic behavior. The model includes two different mobility mechanisms, namely, diffusiophoresis and the Marangoni effect, that convert self-generated gradients of surfactant concentration into the flow at the droplet surface. In turn, surface-driven flow initiates surfactant advection that is the only nonlinear mechanism and, thus, the only source of dynamical complexity in our model. Numerical investigation of the fully-coupled hydrodynamic and advection diffusion problems reveals that strong advection (e.g., large droplet size) may destabilize a steadily self-propelling drop; once destabilized, the droplet spontaneously stops and a symmetric extensile flow emerges. If advection is strengthened even further in comparison with molecular diffusion, the droplet may perform chaotic oscillations. Our results indicate that the thresholds of these instabilities depend heavily on the balance between diffusiophoresis and the Marangoni effect. Using linear stability analysis, we demonstrate that diffusiophoresis promotes the onset of high-order modes of monotonic instability of the motionless drop. We argue that diffusiophoresis has a similar effect on the instabilities of a moving drop.
A limsup fast dynamo on T^3
We construct a time-dependent, incompressible, and uniformly-in-time Lipschitz continuous velocity field on T^3 that produces exponential growth of the magnetic energy along a subsequence of times, for every positive value of the magnetic diffusivity. Because this growth is not uniform in time but occurs only along a diverging sequence of times, we refer to the resulting mechanism as a limsup fast dynamo. Our construction is based on suitably rescaled Arnold-Beltrami-Childress (ABC) flows, each supported on long time intervals. The analysis employs perturbation theory to establish continuity of the exponential growth rate with respect to both the initial data and the diffusivity parameter. This proves the weak form of the fast dynamo conjecture formulated by Childress and Gilbert on T^3, but the considerably more challenging version proposed by Arnold on T^3 remains an open problem.
Physics Informed Neural Network for Multi-dimensional Turbulent Self-gravitating Flows
Molecular clouds exhibit complex, multi-scale dynamics driven by the interplay of turbulence, self-gravity, and gas pressure. Modelling these systems with conventional grid-based methods becomes increasingly expensive as spatial resolution and dimensionality increase. Physics-Informed Neural Networks (PINNs) offer a mesh-free alternative by incorporating the governing equations directly into the training objective, but their ability to model realistic turbulent self-gravitating flows remains largely unexplored. We apply PINNs to isothermal molecular clouds initialized with astrophysically motivated turbulent velocity fields, considering subsonic and supersonic evolution in two and three dimensions. We benchmark the predicted density and velocity fields against the finite-volume code Athena++. PINNs accurately recover the global evolution of the flow over multiple free-fall times across turbulent realizations, Mach numbers, and dimensionalities. Their training cost also exhibits weak dependence on spatial resolution, increasing by less than 25% from 128^3 to 1024^3 in our experiments. These results demonstrate that PINNs can model substantially more realistic self-gravitating turbulent flows than previously explored and provide a promising complementary framework for studying these systems.
Smooth Normalizing Flows
Normalizing flows are a promising tool for modeling probability distributions in physical systems. While state-of-the-art flows accurately approximate distributions and energies, applications in physics additionally require smooth energies to compute forces and higher-order derivatives. Furthermore, such densities are often defined on non-trivial topologies. A recent example are Boltzmann Generators for generating 3D-structures of peptides and small proteins. These generative models leverage the space of internal coordinates (dihedrals, angles, and bonds), which is a product of hypertori and compact intervals. In this work, we introduce a class of smooth mixture transformations working on both compact intervals and hypertori. Mixture transformations employ root-finding methods to invert them in practice, which has so far prevented bi-directional flow training. To this end, we show that parameter gradients and forces of such inverses can be computed from forward evaluations via the inverse function theorem. We demonstrate two advantages of such smooth flows: they allow training by force matching to simulation data and can be used as potentials in molecular dynamics simulations.
Radiation-magnetohydrodynamics with MPI-AMRVAC using flux-limited diffusion
Context. Radiation plays a significant role in solar and astrophysical environments as it may constitute a sizeable fraction of the energy density, momentum flux, and the total pressure. Modelling the dynamic interaction between radiation and magnetized plasmas in such environments is an intricate and computationally costly task. Aims. The goal of this work is to demonstrate the capabilities of the open-source parallel, block-adaptive computational framework MPI-AMRVAC, in solving equations of radiation-magnetohydrodynamics (RMHD), and to present benchmark test cases relevant for radiation-dominated magnetized plasmas. Methods. The existing magnetohydrodynamics (MHD) and flux-limited diffusion (FLD) radiative-hydrodynamics physics modules are combined to solve the equations of radiation-magnetohydrodynamics (RMHD) on block-adaptive finite volume Cartesian meshes in any dimensionality. Results. We introduce and validate several benchmark test cases such as steady radiative MHD shocks, radiation-damped linear MHD waves, radiation-modified Riemann problems and a multi-dimensional radiative magnetoconvection case. We recall the basic governing Rankine-Hugoniot relations for shocks and the dispersion relation for linear MHD waves in the presence of optically thick radiation fields where the diffusion limit is reached. The RMHD system allows for 8 linear wave types, where the classical 7-wave MHD picture (entropy and three wave pairs for slow, Alfven and fast) is augmented with a radiative diffusion mode. Conclusions. The MPI-AMRVAC code now has the capability to perform multidimensional RMHD simulations with mesh adaptation making it well-suited for larger scientific applications to study magnetized matter-radiation interactions in solar and stellar interiors and atmospheres.
On the transmission of floating-point perturbations in flow-dependent filter-width formulations in Large-Eddy Simulation
Heterogeneous high--performance computing architectures expose numerical algorithms to perturbations arising from the non--associativity of floating--point arithmetic. In Large--Eddy Simulation (LES), similar numerical effects may become relevant when they affect the filter--width entering the subgrid scale (SGS) model. This work investigates this mechanism for the least--squares (LSQ) based filter--width formulation, focusing on how floating--point effects are generated, transmitted, and coupled with the resolved flow. We show that, for fixed resolved kinematics, the LSQ filter--width is logarithmically non-expansive but not strictly contractive with respect to perturbations of the mesh metrics. Consequently, small disturbances may be transmitted with little attenuation through strongly directional filter-width responses. To mitigate this sensitivity, we introduce a scalar max--min compression of the directional mesh scales together with a bounded modulation based on the resolved velocity gradient. The resulting formulation reroutes floating--point perturbations through the filter-width operator, improving robustness while preserving the flow--dependent character of the original LSQ construction. The framework is assessed on heterogeneous CPU and GPU architectures for flow past a circular cylinder at Re=3900 and the Taylor--Green vortex at Re=1600. In the former, nearly one--to--one transmission of relative metric disturbances can become relevant when the transmitted perturbations interact with shear-layer transition. By contrast, on orthogonal Taylor--Green vortex grids, the accumulation pathway is structurally absent and no comparable macroscopic response develops. These results suggest floating--point sensitivity matters for LES filter--width formulations in heterogeneous computing environments.
First observation of the Josephson-Anderson relation in experiments on hydrodynamic drag
We verify a recent prediction (Eq. 3.50 in G. L. Eyink, Phys. Rev. X 11, 031054 (2021)) for the drag on an object moving through a fluid. In this prediction the velocity field is decomposed into a nonvortical (potential) and vortical contribution, and so is the associated drag force. In the Josephson-Anderson relation the vortical contribution of the drag force follows from the flux of vorticity traversing the streamlines of the corresponding potential flow. The potential component is directly determined by the plate acceleration and its added mass. The Josephson-Anderson relation is derived from the quantum description of superfluids, but remarkably applies to the classical fluid in our experiment. In our experiment a flat plate is accelerated through water using a robotic arm. This geometry is simple enough to allow analytic potential flow streamlines. The monitored plate position shows an oscillatory component of the acceleration, which adds an additional test of the Josephson-Anderson relation. The instantaneous velocity field is measured using particle image velocimetry. It enables us to evaluate Eq. 3.50 from [1] and compare its prediction to the measured drag force. We find excellent agreement, and, most remarkably find that the added mass contribution to the drag force still stands out after the flow has turned vortical. We finally comment on the requirements on the experimental techniques for evaluating the Josephson-Anderson relation.
DYffusion: A Dynamics-informed Diffusion Model for Spatiotemporal Forecasting
While diffusion models can successfully generate data and make predictions, they are predominantly designed for static images. We propose an approach for efficiently training diffusion models for probabilistic spatiotemporal forecasting, where generating stable and accurate rollout forecasts remains challenging, Our method, DYffusion, leverages the temporal dynamics in the data, directly coupling it with the diffusion steps in the model. We train a stochastic, time-conditioned interpolator and a forecaster network that mimic the forward and reverse processes of standard diffusion models, respectively. DYffusion naturally facilitates multi-step and long-range forecasting, allowing for highly flexible, continuous-time sampling trajectories and the ability to trade-off performance with accelerated sampling at inference time. In addition, the dynamics-informed diffusion process in DYffusion imposes a strong inductive bias and significantly improves computational efficiency compared to traditional Gaussian noise-based diffusion models. Our approach performs competitively on probabilistic forecasting of complex dynamics in sea surface temperatures, Navier-Stokes flows, and spring mesh systems.
3D Dynamic Fluid Assets from Single-View Videos with Generative Gaussian Splatting
While the generation of 3D content from single-view images has been extensively studied, the creation of physically consistent 3D dynamic scenes from videos remains in its early stages. We propose a novel framework leveraging generative 3D Gaussian Splatting (3DGS) models to extract and re-simulate 3D dynamic fluid objects from single-view videos using simulation methods. The fluid geometry represented by 3DGS is initially generated and optimized from single-view images, then denoised, densified, and aligned across frames. We estimate the fluid surface velocity using optical flow, propose a mainstream extraction algorithm to refine it. The 3D volumetric velocity field is then derived from the velocity of the fluid's enclosed surface. The velocity field is therewith converted into a divergence-free, grid-based representation, enabling the optimization of simulation parameters through its differentiability across frames. This process outputs simulation-ready fluid assets with physical dynamics closely matching those observed in the source video. Our approach is applicable to various liquid fluids, including inviscid and viscous types, and allows users to edit the output geometry or extend movement durations seamlessly. This automatic method for creating 3D dynamic fluid assets from single-view videos, easily obtainable from the internet, shows great potential for generating large-scale 3D fluid assets at a low cost.
Evaluating Uncertainty Quantification approaches for Neural PDEs in scientific applications
The accessibility of spatially distributed data, enabled by affordable sensors, field, and numerical experiments, has facilitated the development of data-driven solutions for scientific problems, including climate change, weather prediction, and urban planning. Neural Partial Differential Equations (Neural PDEs), which combine deep learning (DL) techniques with domain expertise (e.g., governing equations) for parameterization, have proven to be effective in capturing valuable correlations within spatiotemporal datasets. However, sparse and noisy measurements coupled with modeling approximation introduce aleatoric and epistemic uncertainties. Therefore, quantifying uncertainties propagated from model inputs to outputs remains a challenge and an essential goal for establishing the trustworthiness of Neural PDEs. This work evaluates various Uncertainty Quantification (UQ) approaches for both Forward and Inverse Problems in scientific applications. Specifically, we investigate the effectiveness of Bayesian methods, such as Hamiltonian Monte Carlo (HMC) and Monte-Carlo Dropout (MCD), and a more conventional approach, Deep Ensembles (DE). To illustrate their performance, we take two canonical PDEs: Burger's equation and the Navier-Stokes equation. Our results indicate that Neural PDEs can effectively reconstruct flow systems and predict the associated unknown parameters. However, it is noteworthy that the results derived from Bayesian methods, based on our observations, tend to display a higher degree of certainty in their predictions as compared to those obtained using the DE. This elevated certainty in predictions suggests that Bayesian techniques might underestimate the true underlying uncertainty, thereby appearing more confident in their predictions than the DE approach.
Hilbert's sixth problem: derivation of fluid equations via Boltzmann's kinetic theory
In this paper, we rigorously derive the fundamental PDEs of fluid mechanics, such as the compressible Euler and incompressible Navier-Stokes-Fourier equations, starting from the hard sphere particle systems undergoing elastic collisions. This resolves Hilbert's sixth problem, as it pertains to the program of deriving the fluid equations from Newton's laws by way of Boltzmann's kinetic theory. The proof relies on the derivation of Boltzmann's equation on 2D and 3D tori, which is an extension of our previous work (arXiv:2408.07818).
Thermalization, Chaos and Hydrodynamics in Classical Hamiltonian Systems
We will discuss various aspects of thermalization, chaos and hydrodynamics in one dimensional classical Hamiltonian systems. We study two problems. First, we will revisit the Fermi-Pasta-Ulam-Tsingou (FPUT) problem in order to understand what thermalization is and discuss what leads the system starting from a typical initial condition to a thermal state. Here we discuss the various possibilities like the role of averaging, the choice of observables, the choice of initial conditions and the role of chaos in thermalization. Then, we study the evolution of a blast wave in an alternate mass hard particle (AHP) gas and study the evolution of conserved fields in the system at short times. We find a good agreement with the Taylor-von Neumann-Sedov (TvNS) solution, which was studied during the Second World War in the context of atomic explosions, everywhere except near the core of the blast. We then model this behaviour by using the Navier-Stokes-Fourier (NSF) equations.
