Daily Papers

Recent studies have revealed that self-sustaining cascading failures in distributed systems frequently lead to widespread outages, which are challenging to contain and recover from. Existing failure detection techniques struggle to expose such failures prior to deployment, as they typically require a complex combination of specific conditions to be triggered. This challenge stems from the inherent nature of cascading failures, as they typically involve a sequence of fault propagations, each activated by distinct conditions. This paper presents CSnake, a fault injection framework to expose self-sustaining cascading failures in distributed systems. CSnake uses the novel idea of causal stitching, which causally links multiple single-fault injections in different tests to simulate complex fault propagation chains. To identify these chains, CSnake designs a counterfactual causality analysis of fault propagations - fault causality analysis (FCA): FCA compares the execution trace of a fault injection run with its corresponding profile run (i.e., same test w/o the injection) and identifies any additional faults triggered, which are considered to have a causal relationship with the injected fault. To address the large search space of fault and workload combinations, CSnake employs a three-phase allocation protocol of test budget that prioritizes faults with unique and diverse causal consequences, increasing the likelihood of uncovering conditional fault propagations. Furthermore, to avoid incorrectly connecting fault propagations from workloads with incompatible conditions, CSnake performs a local compatibility check that approximately checks the compatibility of the path constraints associated with connected fault propagations with low overhead. CSnake detected 15 bugs that cause self-sustaining cascading failures in five systems, five of which have been confirmed with two fixed.

While cloud-native microservice architectures have revolutionized software development, their inherent operational complexity makes failure Root Cause Analysis (RCA) a critical yet challenging task. Numerous data-driven RCA models have been proposed to address this challenge. However, we find that the benchmarks used to evaluate these models are often too simple to reflect real-world scenarios. Our preliminary study reveals that simple rule-based methods can achieve performance comparable to or even surpassing state-of-the-art (SOTA) models on four widely used public benchmarks. This finding suggests that the oversimplification of existing benchmarks might lead to an overestimation of the performance of RCA methods. To further investigate the oversimplification issue, we conduct a systematic analysis of popular public RCA benchmarks, identifying key limitations in their fault injection strategies, call graph structures, and telemetry signal patterns. Based on these insights, we propose an automated framework for generating more challenging and comprehensive benchmarks that include complex fault propagation scenarios. Our new dataset contains 1,430 validated failure cases from 9,152 fault injections, covering 25 fault types across 6 categories, dynamic workloads, and hierarchical ground-truth labels that map failures from services down to code-level causes. Crucially, to ensure the failure cases are relevant to IT operations, each case is validated to have a discernible impact on user-facing SLIs. Our re-evaluation of 11 SOTA models on this new benchmark shows that they achieve low Top@1 accuracies, averaging 0.21, with the best-performing model reaching merely 0.37, and execution times escalating from seconds to hours.

Issue resolution has made remarkable progress thanks to the advanced reasoning capabilities of large language models (LLMs). Recently, agent-based frameworks such as SWE-agent have further advanced this progress by enabling autonomous, tool-using agents to tackle complex software engineering tasks. While existing agent-based issue resolution approaches are primarily based on agents' independent explorations, they often get stuck in local solutions and fail to identify issue patterns that span across different parts of the codebase. To address this limitation, we propose SWE-Debate, a competitive multi-agent debate framework that encourages diverse reasoning paths and achieves more consolidated issue localization. SWE-Debate first creates multiple fault propagation traces as localization proposals by traversing a code dependency graph. Then, it organizes a three-round debate among specialized agents, each embodying distinct reasoning perspectives along the fault propagation trace. This structured competition enables agents to collaboratively converge on a consolidated fix plan. Finally, this consolidated fix plan is integrated into an MCTS-based code modification agent for patch generation. Experiments on the SWE-bench benchmark show that SWE-Debate achieves new state-of-the-art results in open-source agent frameworks and outperforms baselines by a large margin.

In this paper, we propose REASON, a novel framework that enables the automatic discovery of both intra-level (i.e., within-network) and inter-level (i.e., across-network) causal relationships for root cause localization. REASON consists of Topological Causal Discovery and Individual Causal Discovery. The Topological Causal Discovery component aims to model the fault propagation in order to trace back to the root causes. To achieve this, we propose novel hierarchical graph neural networks to construct interdependent causal networks by modeling both intra-level and inter-level non-linear causal relations. Based on the learned interdependent causal networks, we then leverage random walks with restarts to model the network propagation of a system fault. The Individual Causal Discovery component focuses on capturing abrupt change patterns of a single system entity. This component examines the temporal patterns of each entity's metric data (i.e., time series), and estimates its likelihood of being a root cause based on the Extreme Value theory. Combining the topological and individual causal scores, the top K system entities are identified as root causes. Extensive experiments on three real-world datasets with case studies demonstrate the effectiveness and superiority of the proposed framework.

Industrial plants are prone to faults. To notify the operator of a fault occurrence, alarms are utilized as a basic part of modern computer-controlled plants. However, due to the interconnections of different parts of a plant, a single fault often propagates through the plant and triggers a (sometimes large) number of alarms. A graphical plant topology can help operators, process engineers and maintenance experts find the root cause of a plant upset or discover the propagation path of a fault. In this paper, a method is developed to extract plant topology form alarm data. The method is based on process mining, a collection of concepts and algorithms that model a process (not necessarily an engineering one) based on recorded events. The event based nature of alarm data as well as the chronological order of recorded alarms make them suitable for process mining. The methodology developed in this paper is based on preparing alarm data for process mining and then using the suitable process mining algorithms to extract plant topology. The extracted topology is represented by the familiar Petri net which can be used for root cause analysis and discovering fault propagation paths. The methods to evaluate the extracted topology are also discussed. A case study on the well-known Tennessee Eastman process demonstrates the utility of the proposed method.

Effective root cause analysis (RCA) is vital for swiftly restoring services, minimizing losses, and ensuring the smooth operation and management of complex systems. Previous data-driven RCA methods, particularly those employing causal discovery techniques, have primarily focused on constructing dependency or causal graphs for backtracking the root causes. However, these methods often fall short as they rely solely on data from a single modality, thereby resulting in suboptimal solutions. In this work, we propose Mulan, a unified multi-modal causal structure learning method for root cause localization. We leverage a log-tailored language model to facilitate log representation learning, converting log sequences into time-series data. To explore intricate relationships across different modalities, we propose a contrastive learning-based approach to extract modality-invariant and modality-specific representations within a shared latent space. Additionally, we introduce a novel key performance indicator-aware attention mechanism for assessing modality reliability and co-learning a final causal graph. Finally, we employ random walk with restart to simulate system fault propagation and identify potential root causes. Extensive experiments on three real-world datasets validate the effectiveness of our proposed framework.

Deep neural networks (DNNs) are increasingly being deployed in safety-critical systems such as personal healthcare devices and self-driving cars. In such DNN-based systems, error resilience is a top priority since faults in DNN inference could lead to mispredictions and safety hazards. For latency-critical DNN inference on resource-constrained edge devices, it is nontrivial to apply conventional redundancy-based fault tolerance techniques. In this paper, we propose FitAct, a low-cost approach to enhance the error resilience of DNNs by deploying fine-grained post-trainable activation functions. The main idea is to precisely bound the activation value of each individual neuron via neuron-wise bounded activation functions so that it could prevent fault propagation in the network. To avoid complex DNN model re-training, we propose to decouple the accuracy training and resilience training and develop a lightweight post-training phase to learn these activation functions with precise bound values. Experimental results on widely used DNN models such as AlexNet, VGG16, and ResNet50 demonstrate that FitAct outperforms state-of-the-art studies such as Clip-Act and Ranger in enhancing the DNN error resilience for a wide range of fault rates while adding manageable runtime and memory space overheads.

Root cause analysis (RCA) is essential for diagnosing failures within complex software systems to ensure system reliability. The highly distributed and interdependent nature of modern cloud-based systems often complicates RCA efforts, particularly for multi-hop fault propagation, where symptoms appear far from their true causes. Recent advancements in Large Language Models (LLMs) present new opportunities to enhance automated RCA. However, their practical value for RCA depends on the fidelity of reasoning and decision-making. Existing work relies on historical incident corpora, operates directly on high-volume telemetry beyond current LLM capacity, or embeds reasoning inside complex multi-agent pipelines -- conditions that obscure whether failures arise from reasoning itself or from peripheral design choices. We present a focused empirical evaluation that isolates an LLM's reasoning behavior. We design a controlled experimental framework that foregrounds the LLM by using a simplified experimental setting. We evaluate six LLMs under two agentic workflows (ReAct and Plan-and-Execute) and a non-agentic baseline on two real-world case studies (GAIA and OpenRCA). In total, we executed 48,000 simulated failure scenarios, totaling 228 days of execution time. We measure both root-cause accuracy and the quality of intermediate reasoning traces. We produce a labeled taxonomy of 16 common RCA reasoning failures and use an LLM-as-a-Judge for annotation. Our results clarify where current open-source LLMs succeed and fail in multi-hop RCA, quantify sensitivity to input data modalities, and identify reasoning failures that predict final correctness. Together, these contributions provide transparent and reproducible empirical results and a failure taxonomy to guide future work on reasoning-driven system diagnosis.

One of the fundamental challenges in enabling fault-tolerant quantum computation is realising fast enough quantum decoders. We present a new two-stage decoder that accelerates the decoding cycle and boosts accuracy. In the first stage, a partial decoder based on belief propagation is used to correct errors that occurred with high probability. In the second stage, a conventional decoder corrects any remaining errors. We study the performance of our two-stage decoder with simulations using the surface code under circuit-level noise. When the conventional decoder is minimum-weight perfect matching, adding the partial decoder decreases bandwidth requirements, increases speed and improves logical accuracy. Specifically, we observe partial decoding consistently speeds up the minimum-weight perfect matching stage by between 2x-4x on average depending on the parameter regime, and raises the threshold from 0.94% to 1.02%.

Localizing the root cause of network faults is crucial to network operation and maintenance. However, due to the complicated network architectures and wireless environments, as well as limited labeled data, accurately localizing the true root cause is challenging. In this paper, we propose a novel algorithm named NetRCA to deal with this problem. Firstly, we extract effective derived features from the original raw data by considering temporal, directional, attribution, and interaction characteristics. Secondly, we adopt multivariate time series similarity and label propagation to generate new training data from both labeled and unlabeled data to overcome the lack of labeled samples. Thirdly, we design an ensemble model which combines XGBoost, rule set learning, attribution model, and graph algorithm, to fully utilize all data information and enhance performance. Finally, experiments and analysis are conducted on the real-world dataset from ICASSP 2022 AIOps Challenge to demonstrate the superiority and effectiveness of our approach.

Modern AI systems increasingly comprise multiple interconnected neural networks to tackle complex inference tasks. Testing such systems for robustness and safety entails significant challenges. Current state-of-the-art robustness testing techniques, whether black-box or white-box, have been proposed and implemented for single-network models and do not scale well to multi-network pipelines. We propose a modular robustness testing framework that applies a given set of perturbations to test data. Our testing framework supports (1) a component-wise system analysis to isolate errors and (2) reasoning about error propagation across the neural network modules. The testing framework is architecture and modality agnostic and can be applied across domains. We apply the framework to a real-world autonomous rail inspection system composed of multiple deep networks and successfully demonstrate how our approach enables fine-grained robustness analysis beyond conventional end-to-end metrics.

Time series forecasting (TSF) increasingly drives decisions in transportation, energy, finance, healthcare, and infrastructure, yet current evaluation remains overly narrow: standard benchmarks reward low held-out error, while robustness studies typically reduce failure to Gaussian noise, random masking, or bounded adversarial perturbations. This obscures the real failure modes of deployed forecasting systems. Input-side anomalies are not merely noisier inputs: they often reflect structured events that alter temporal dynamics, break cross-variable dependencies, induce regime shifts, or propagate from faulty sensors to downstream decisions. These semantic, causal, and system-level failures cannot be faithfully captured by i.i.d. perturbations alone. The rise of TSF foundation models makes this evaluation gap more urgent, as unauditable pretraining corpora make held-out generalization increasingly unreliable. We therefore advocate scenario-grounded stress testing. Each test instance should include historical inputs and future targets, together with a semantic scenario, an explicit failure operator, and a measurable difficulty level. This shift makes evaluation interpretable, attributable, and deployment-relevant and friendly, enabling the community to ask not only which model is accurate, but under what conditions it fails and why.

Forecasting seismic waveforms beyond observed data remains challenging due to the nonlinear, dispersive, and multi-scale nature of seismic wave propagation. In this work, we introduce SeismoGPT, a transformer-based autoregressive model designed to forecast three-component seismic waveforms directly in the time domain. Forecasting is formulated as a physically constrained continuation problem in which the model receives waveform context beginning at the P-wave arrival and extending a defined time beyond the S-wave arrival, after which future motion is generated recursively without access to ground-truth samples. Evaluation is performed on synthetic seismograms spanning source depths of 5--100\,km, epicentral distances of 10--90^circ, and magnitudes 3 leq M_w leq 7. To disentangle the effects of context length and prediction horizon, we define three evaluation configurations using a distance-normalized context ratio and fixed prediction horizons of 120 and 240\,s. Across all configurations, the model achieves median normalized cross correlation above 0.93. Analysis of representative forecasts shows that successful predictions preserve both phase coherence and spectral energy distribution. Where failure cases arise, this is primarily due to gradual phase drift during autoregressive rollout rather than unphysical signal generation. These results demonstrate that transformer-based sequence models can learn stable dynamical continuation of seismic wavefields, highlighting the potential of foundation-model approaches for physics-driven time-series forecasting. There are potential applications of this methodology in seismic warning and hazard mitigation, particularly for next-generation gravitational-wave observatories, such as the Einstein Telescope.

Organizations across finance, healthcare, transportation, content moderation, and critical infrastructure are rapidly deploying highly automated AI systems, yet they lack principled methods to quantify how increasing automation amplifies harm when failures occur. We propose a parsimonious Bayesian risk decomposition expressing expected loss as the product of three terms: the probability of system failure, the conditional probability that a failure propagates into harm given the automation level, and the expected severity of harm. This framework isolates a critical quantity -- the conditional probability that failures propagate into harm -- which captures execution and oversight risk rather than model accuracy alone. We develop complete theoretical foundations: formal proofs of the decomposition, a harm propagation equivalence theorem linking the harm propagation probability to observable execution controls, risk elasticity measures, efficient frontier analysis for automation policy, and optimal resource allocation principles with second-order conditions. We motivate the framework with an illustrative case study of the 2012 Knight Capital incident ($440M loss) as one instantiation of a broadly applicable failure pattern, and characterize the research design required to empirically validate the framework at scale across deployment domains. This work provides the theoretical foundations for a new class of deployment-focused risk governance tools for agentic and automated AI systems.

Despite the success of physics-informed neural networks (PINNs) in approximating partial differential equations (PDEs), PINNs can sometimes fail to converge to the correct solution in problems involving complicated PDEs. This is reflected in several recent studies on characterizing the "failure modes" of PINNs, although a thorough understanding of the connection between PINN failure modes and sampling strategies is missing. In this paper, we provide a novel perspective of failure modes of PINNs by hypothesizing that training PINNs relies on successful "propagation" of solution from initial and/or boundary condition points to interior points. We show that PINNs with poor sampling strategies can get stuck at trivial solutions if there are propagation failures, characterized by highly imbalanced PDE residual fields. To mitigate propagation failures, we propose a novel Retain-Resample-Release sampling (R3) algorithm that can incrementally accumulate collocation points in regions of high PDE residuals with little to no computational overhead. We provide an extension of R3 sampling to respect the principle of causality while solving time-dependent PDEs. We theoretically analyze the behavior of R3 sampling and empirically demonstrate its efficacy and efficiency in comparison with baselines on a variety of PDE problems.

Frontier large language model training consumes massive accelerator fleets and long wall-clock computation, making stability failures costly when they occur. After a numerical or a hyperparameter fault has already destabilized the training dynamics, it may continue for thousands of steps while loss and gradient norms still appear normal. We study mechanism-driven detection of training instability by deriving internal monitors from the functional role of each critical module and from the earliest computational sites where failures are expected to produce measurable signatures. For low-precision flash attention, we monitor the spectral entropy of a QK bilinear decomposition, whose first-order term becomes abnormal before the loss fully collapses. For MoE routers, we derive indicators from their role in expert selection. Our fault-injection experiments on low-precision attention, large learning-rate, and combined faults show that these signals provide distinct signatures for different failures, triggering thousands of steps before loss divergence.

Large Language Model-based Multi-Agent Systems (LLM-MAS) are increasingly applied to complex collaborative scenarios. However, their collaborative mechanisms may cause minor inaccuracies to gradually solidify into system-level false consensus through iteration. Such risks are difficult to trace since errors can propagate and amplify through message dependencies. Existing protections often rely on single-agent validation or require modifications to the collaboration architecture, which can weaken effective information flow and may not align with natural collaboration processes in real tasks. To address this, we propose a propagation dynamics model tailored for LLM-MAS that abstracts collaboration as a directed dependency graph and provides an early-stage risk criterion to characterize amplification risk. Through experiments on six mainstream frameworks, we identify three vulnerability classes: cascade amplification, topological sensitivity, and consensus inertia. We further instantiate an attack where injecting just a single atomic error seed leads to widespread failure. In response, we introduce a genealogy-graph-based governance layer, implemented as a message-layer plugin, that suppresses both endogenous and exogenous error amplification without altering the collaboration architecture. Experiments show that this approach raises the defense success rate from a baseline of 0.32 to over 0.89 and significantly mitigates the cascading spread of minor errors.

Crowdsourcing annotations has created a paradigm shift in the availability of labeled data for machine learning. Availability of large datasets has accelerated progress in common knowledge applications involving visual and language data. However, specialized applications that require expert labels lag in data availability. One such application is fault segmentation in subsurface imaging. Detecting, tracking, and analyzing faults has broad societal implications in predicting fluid flows, earthquakes, and storing excess atmospheric CO_2. However, delineating faults with current practices is a labor-intensive activity that requires precise analysis of subsurface imaging data by geophysicists. In this paper, we propose the CRACKS dataset to detect and segment faults in subsurface images by utilizing crowdsourced resources. We leverage Amazon Mechanical Turk to obtain fault delineations from sections of the Netherlands North Sea subsurface images from (i) 26 novices who have no exposure to subsurface data and were shown a video describing and labeling faults, (ii) 8 practitioners who have previously interacted and worked on subsurface data, (iii) one geophysicist to label 7636 faults in the region. Note that all novices, practitioners, and the expert segment faults on the same subsurface volume with disagreements between and among the novices and practitioners. Additionally, each fault annotation is equipped with the confidence level of the annotator. The paper provides benchmarks on detecting and segmenting the expert labels, given the novice and practitioner labels. Additional details along with the dataset links and codes are available at https://alregib.ece.gatech.edu/cracks-crowdsourcing-resources-for-analysis-and-categorization-of-key-subsurface-faults/{link}.

LLM-based multi-agent systems (MASs) are increasingly used to solve complex tasks through coordinated reasoning, tool use, and interaction with external resources. However, attributing failures in such systems remains challenging because the observed outcome often does not directly reveal the error responsible for the failed execution. In this work, the attribution target is the decisive error, defined as the agent--step pair whose correction would recover the failed execution. Existing approaches largely identify suspicious steps without explicitly modeling how errors propagate across interactions or persist in unresolved loops, making decisive errors difficult to distinguish from downstream failure symptoms. We propose Error-Propagation Modeling for Failure Attribution (EMFA). EMFA constructs a structured representation of the failed trajectory, models both cascading propagation and persistent interaction loops, and uses propagation-aware candidate screening followed by counterfactual verification to identify the decisive agent--step pair. On the Who\&When benchmark, EMFA achieves state-of-the-art step-level attribution accuracy and remains competitive at the agent level. It improves the previous best step-level results by 3.45 and 4.40 percentage points on the Hand-Crafted and Algorithm-Generated subsets, respectively.

In Agentic AI, Large Language Models (LLMs) are increasingly used in the orchestration layer to coordinate multiple agents and to interact with external services, retrieval components, and shared memory. In this setting, failures are not limited to incorrect final outputs. They also arise from long-horizon interaction, stochastic decisions, and external side effects (such as API calls, database writes, and message sends). Common failures include non-termination, role drift, propagation of unsupported claims, and attacks via untrusted context or external channels. This paper presents an assurance framework for such Agentic AI systems. Executions are instrumented as Message-Action Traces (MAT) with explicit step and trace contracts. Contracts provide machine-checkable verdicts, localize the first violating step, and support deterministic replay. The framework includes stress testing, formulated as a budgeted counterexample search over bounded perturbations. It also supports structured fault injection at service, retrieval, and memory boundaries to assess containment under realistic operational faults and degraded conditions. Finally, governance is treated as a runtime component, enforcing per-agent capability limits and action mediation (allow, rewrite, block) at the language-to-action boundary. To support comparative evaluations across stochastic seeds, models, and orchestration configurations, the paper defines trace-based metrics for task success, termination reliability, contract compliance, factuality indicators, containment rate, and governance outcome distributions. More broadly, the framework is intended as a common abstraction to support testing and evaluation of multi-agent LLM systems, and to facilitate reproducible comparison across orchestration designs and configurations.

Differentiable programming techniques are widely used in the community and are responsible for the machine learning renaissance of the past several decades. While these methods are powerful, they have limits. In this short report, we discuss a common chaos based failure mode which appears in a variety of differentiable circumstances, ranging from recurrent neural networks and numerical physics simulation to training learned optimizers. We trace this failure to the spectrum of the Jacobian of the system under study, and provide criteria for when a practitioner might expect this failure to spoil their differentiation based optimization algorithms.

Multi-Agent Reinforcement Learning (MARL) is increasingly deployed in safety-critical domains, yet methods for interpretable failure detection and attribution remain underdeveloped. We introduce a two-stage gradient-based framework that provides interpretable diagnostics for three critical failure analysis tasks: (1) detecting the true initial failure source (Patient-0); (2) validating why non-attacked agents may be flagged first due to domino effects; and (3) tracing how failures propagate through learned coordination pathways. Stage 1 performs interpretable per-agent failure detection via Taylor-remainder analysis of policy-gradient costs, declaring an initial Patient-0 candidate at the first threshold crossing. Stage 2 provides validation through geometric analysis of critic derivatives-first-order sensitivity and directional second-order curvature aggregated over causal windows to construct interpretable contagion graphs. This approach explains "downstream-first" detection anomalies by revealing pathways that amplify upstream deviations. Evaluated across 500 episodes in Simple Spread (3 and 5 agents) and 100 episodes in StarCraft II using MADDPG and HATRPO, our method achieves 88.2-99.4% Patient-0 detection accuracy while providing interpretable geometric evidence for detection decisions. By moving beyond black-box detection to interpretable gradient-level forensics, this framework offers practical tools for diagnosing cascading failures in safety-critical MARL systems.

Existing benchmarks for tool-using LLM agents primarily report single-run success rates and miss reliability properties required in production. We introduce ReliabilityBench, a benchmark for evaluating agent reliability across three dimensions: (i) consistency under repeated execution using pass^k, (ii) robustness to semantically equivalent task perturbations at intensity ε, and (iii) fault tolerance under controlled tool/API failures at intensity λ. ReliabilityBench contributes a unified reliability surface R(k,ε,λ), action metamorphic relations that define correctness via end-state equivalence rather than text similarity, and a chaos-engineering-style fault injection framework (timeouts, rate limits, partial responses, schema drift). We evaluate two models (Gemini 2.0 Flash, GPT-4o) and two agent architectures (ReAct, Reflexion) across four domains (scheduling, travel, customer support, e-commerce) over 1,280 episodes. Perturbations alone reduce success from 96.9% at ε=0 to 88.1% at ε=0.2. Rate limiting is the most damaging fault in ablations. ReAct is more robust than Reflexion under combined stress, and Gemini 2.0 Flash achieves comparable reliability to GPT-4o at much lower cost. ReliabilityBench provides a systematic framework for assessing production readiness of LLM agents.

Generative sequence models are often trained to plan motion in physical domains, from robotics to mechanical simulations. When constructing a dataset to train such a model, engineers may curate demonstrations to specify how trajectories should be distributed over a physical quantity like travel distance or mechanical energy. For example, a roboticist building a maze navigation agent might choose demonstrations whose travel distances cover a fixed range uniformly, hoping to constrain the agent's expected power usage. We find that standard deep learning can violate this intent: each generated trajectory can seem plausible on its own, but the aggregate distribution over the physical quantity is wrong. We call this failure physical misgeneralization, and develop an account of its mechanism. Using controlled synthetic tasks, we show that physical misgeneralization arises when local errors typical of the model class propagate through the physical measurement to shift the recovered distribution. We estimate these errors with a data deviation kernel, and we use it to predict which physical quantities gain or lose mass in both our synthetic and more applied maze navigation and double-pendulum motion tasks. Finally, our mechanistic interpretation helps identify which mitigation strategies are structurally promising, and we use it to propose a kernel-informed intervention.

Operators from various industries have been pushing the adoption of wireless sensing nodes for industrial monitoring, and such efforts have produced sizeable condition monitoring datasets that can be used to build diagnosis algorithms capable of warning maintenance engineers of impending failure or identifying current system health conditions. However, single operators may not have sufficiently large fleets of systems or component units to collect sufficient data to develop data-driven algorithms. Collecting a satisfactory quantity of fault patterns for safety-critical systems is particularly difficult due to the rarity of faults. Federated learning (FL) has emerged as a promising solution to leverage datasets from multiple operators to train a decentralized asset fault diagnosis model while maintaining data confidentiality. However, there are still considerable obstacles to overcome when it comes to optimizing the federation strategy without leaking sensitive data and addressing the issue of client dataset heterogeneity. This is particularly prevalent in fault diagnosis applications due to the high diversity of operating conditions and system configurations. To address these two challenges, we propose a novel clustering-based FL algorithm where clients are clustered for federating based on dataset similarity. To quantify dataset similarity between clients without explicitly sharing data, each client sets aside a local test dataset and evaluates the other clients' model prediction accuracy and uncertainty on this test dataset. Clients are then clustered for FL based on relative prediction accuracy and uncertainty.

Although diffusion models (DMs) have shown promising performances in a number of tasks (e.g., speech synthesis and image generation), they might suffer from error propagation because of their sequential structure. However, this is not certain because some sequential models, such as Conditional Random Field (CRF), are free from this problem. To address this issue, we develop a theoretical framework to mathematically formulate error propagation in the architecture of DMs, The framework contains three elements, including modular error, cumulative error, and propagation equation. The modular and cumulative errors are related by the equation, which interprets that DMs are indeed affected by error propagation. Our theoretical study also suggests that the cumulative error is closely related to the generation quality of DMs. Based on this finding, we apply the cumulative error as a regularization term to reduce error propagation. Because the term is computationally intractable, we derive its upper bound and design a bootstrap algorithm to efficiently estimate the bound for optimization. We have conducted extensive experiments on multiple image datasets, showing that our proposed regularization reduces error propagation, significantly improves vanilla DMs, and outperforms previous baselines.

With the growing interest on Large Language Models (LLMs) for fault localization and program repair, ensuring the integrity and generalizability of the LLM-based methods becomes paramount. The code in existing widely-adopted benchmarks for these tasks was written before the the bloom of LLMs and may be included in the training data of existing popular LLMs, thereby suffering from the threat of data leakage, leading to misleadingly optimistic performance metrics. To address this issue, we introduce "ConDefects", a novel dataset of real faults meticulously curated to eliminate such overlap. ConDefects contains 1,254 Java faulty programs and 1,625 Python faulty programs. All these programs are sourced from the online competition platform AtCoder and were produced between October 2021 and September 2023. We pair each fault with fault locations and the corresponding repaired code versions, making it tailored for in fault localization and program repair related research. We also provide interfaces for selecting subsets based on different time windows and coding task difficulties. While inspired by LLM-based tasks, ConDefects can be adopted for benchmarking ALL types of fault localization and program repair methods. The dataset is publicly available, and a demo video can be found at https://www.youtube.com/watch?v=22j15Hj5ONk.

AI systems can fail silently. The failure propagates through training loops, evaluation pipelines, and production monitoring stacks until downstream harm makes it visible. This paper introduces evaluation blindness: a measurement function M exhibits evaluation blindness with respect to failure class F when it produces readings indistinguishable from a healthy state while the system is actually failing, with no auxiliary signal flagging the gap. The problem surfaces at two lifecycle stages the literature has treated separately. At training time, reward models are gamed, importance-sampling corrections are silently miscalculated, and benchmark contamination inflates fine-tuning evaluations, all while loss curves look healthy and gradient updates proceed normally. At deployment time, monitoring fails to catch six classes of production failure, including an Operational category that is 100% silent by structural definition. We provide a formal detectability predicate unifying both stages. Four training-time case studies trace concrete breakdowns, including a real implementation bug in TRL PR #6594 where gradients are corrupted as loss decreases normally. A six-class taxonomy validated against 50 real-world incidents from court documents and regulatory filings finds that 53% of verifiable public failures were silent. A failure budget framework ties acceptable failure rates to use-case risk class. The implication is direct: measurement infrastructure is a correctness concern across the full AI lifecycle, not just at evaluation time. Data, code, and taxonomy schema are at https://github.com/priyanka25aug/llm-failure-taxonomy.

In recent years, microservices have gained widespread adoption in IT operations due to their scalability, maintenance, and flexibility. However, it becomes challenging for site reliability engineers (SREs) to pinpoint the root cause due to the complex relationships in microservices when facing system malfunctions. Previous research employed structured learning methods (e.g., PC-algorithm) to establish causal relationships and derive root causes from causal graphs. Nevertheless, they ignored the temporal order of time series data and failed to leverage the rich information inherent in the temporal relationships. For instance, in cases where there is a sudden spike in CPU utilization, it can lead to an increase in latency for other microservices. However, in this scenario, the anomaly in CPU utilization occurs before the latency increase, rather than simultaneously. As a result, the PC-algorithm fails to capture such characteristics. To address these challenges, we propose RUN, a novel approach for root cause analysis using neural Granger causal discovery with contrastive learning. RUN enhances the backbone encoder by integrating contextual information from time series, and leverages a time series forecasting model to conduct neural Granger causal discovery. In addition, RUN incorporates Pagerank with a personalization vector to efficiently recommend the top-k root causes. Extensive experiments conducted on the synthetic and real-world microservice-based datasets demonstrate that RUN noticeably outperforms the state-of-the-art root cause analysis methods. Moreover, we provide an analysis scenario for the sock-shop case to showcase the practicality and efficacy of RUN in microservice-based applications. Our code is publicly available at https://github.com/zmlin1998/RUN.

In agentic scientific machine learning (SciML), large language model (LLM) agents can discover surrogate models and select one by an automated score, typically an error metric. A low error, however, does not establish that the predicted fields satisfy the physics that matter for mechanics, such as boundary conditions, superposition, stiffness scaling, or causality. We introduce Physics-Audited Agentic SciML (PA-SciML), a verification-first workflow for agentic SciML discovery. The workflow fixes a scoring evaluator before search, derives reviewable machine-checkable physics requirements, checks each trained candidate on its outputs, and separately searches prescribed input ranges or measured load-history spans for high-violation cases without reference solution fields. A surrogate is reported as verified only under the stated checks. When enabled, the workflow also adds advisory numerical probes before training and tests one modeling change at a time to record which isolated edits are associated with score gains before reuse. In the reported computational-solid-mechanics numerical examples, the static elasticity run selects a surrogate with lower validation error than the error-only baseline while both selected models pass the common linear-elastic checks. In the transient elastodynamics run, an error-only baseline with similar mean error fails a stricter causality check by responding to future parts of the loading history, while the selected surrogate passes the stated checks. The main distinction is per-candidate physics evidence on predicted fields, not a richer aggregate score.

Fracture is one of the main causes of failure in engineering structures. Phase field methods coupled with adaptive mesh refinement (AMR) techniques have been widely used to model crack propagation due to their ease of implementation and scalability. However, phase field methods can still be computationally demanding making them unfeasible for high-throughput design applications. Machine learning (ML) models such as Graph Neural Networks (GNNs) have shown their ability to emulate complex dynamic problems with speed-ups orders of magnitude faster compared to high-fidelity simulators. In this work, we present a dynamic mesh-based GNN framework for emulating phase field simulations of crack propagation with AMR for different crack configurations. The developed framework - ADAPTive mesh-based graph neural network (ADAPT-GNN) - exploits the benefits of both ML methods and AMR by describing the graph representation at each time-step as the refined mesh itself. Using ADAPT-GNN, we predict the evolution of displacement fields and scalar damage field (or phase field) with high accuracy compared to conventional phase field fracture model. We also compute crack stress fields with high accuracy using the predicted displacements and phase field parameter. Finally, we observe speed up of 15-36x compared to serial execution of the phase field model.

Modern web dashboards and enterprise applications increasingly rely on complex, distributed microservices architectures. While these architectures offer scalability, they introduce significant challenges in debugging and observability. When failures occur, they often manifest as opaque error messages to the end-user such as Something went wrong. This masks the underlying root cause which may reside in browser side exceptions, API contract violations, or server side logic failures. Existing monitoring tools capture these events in isolation but fail to correlate them effectively or provide intelligible explanations to non technical users. This paper proposes a novel system for Automated Multi Source Debugging and Natural Language Error Explanation. The proposed framework automatically collects and correlates error data from disparate sources such as browser, API, server logs and validates API contracts in real time, and utilizes Large Language Models to generate natural language explanations. This approach significantly reduces Mean Time to Resolution for support engineers and improves the user experience by transforming cryptic error codes into actionable insights.

Cascading failures in power grids can lead to grid collapse, causing severe disruptions to social operations and economic activities. In certain cases, multi-stage cascading failures can occur. However, existing cascading-failure-mitigation strategies are usually single-stage-based, overlooking the complexity of the multi-stage scenario. This paper treats the multi-stage cascading failure problem as a reinforcement learning task and develops a simulation environment. The reinforcement learning agent is then trained via the deterministic policy gradient algorithm to achieve continuous actions. Finally, the effectiveness of the proposed approach is validated on the IEEE 14-bus and IEEE 118-bus systems.

Facing climate change, the already limited availability of drinking water will decrease in the future rendering drinking water an increasingly scarce resource. Considerable amounts of it are lost through leakages in water transportation and distribution networks. Thus, anomaly detection and localization, in particular for leakages, are crucial but challenging tasks due to the complex interactions and changing demands in water distribution networks. In this work, we analyze the effects of anomalies on the dynamics of critical infrastructure systems by modeling the networks employing Bayesian networks. We then discuss how the problem is connected to and can be considered through the lens of concept drift. In particular, we argue that model-based explanations of concept drift are a promising tool for localizing anomalies given limited information about the network. The methodology is experimentally evaluated using realistic benchmark scenarios. To showcase that our methodology applies to critical infrastructure more generally, in addition to considering leakages and sensor faults in water systems, we showcase the suitability of the derived technique to localize sensor faults in power systems.

Autonomous agents increasingly perform bounded software tasks under an orchestrator that retries, resumes, and budgets them. The machinery such orchestrators reach for is the service mesh's: retry, timeout, and error-rate circuit breaking. We report a failure study of a production agentic software-delivery platform over 147 numbered incidents spanning 81 runs, each with a measured cost and, in most cases, a mutation proof reproducing the failure. All three assumptions those primitives rest on are violated in practice, and we quantify the consequences: a loop of fifty-four consecutive successful tool calls no error-rate breaker could see; a progress signal constant by construction, guaranteeing a false trip on the third repair round and driving one run from six of six components to three; twenty-one events accumulated across six invocations of one delegation, making a correct, idempotent component unwinnable; a misrouted failure that woke five components for a two-component fault, leaving three bystanders regressing working code; and twelve incidents in which the enforcement layer blocked correct work, the most expensive costing 107 agent turns and zero accepted writes. We find one cross-cutting cause and its dual. Identity adequacy: in five separate subsystems an identity that failed to discriminate produced a confident wrong answer, and two of them derived the corrective rule independently. Evidence adequacy: a reliability decision may be taken only on evidence capable of moving, attributable to what it measures, and deterministic under identical conditions. From the findings we derive seven reliability primitives whose enforcement unit is the delegation rather than the message, and specify the controlled evaluation the study motivates but does not constitute.

Tool-using automation systems, from scripts and CI bots to agentic assistants, fail in recurring patterns. Common failures include unsafe side effects, invalid arguments, uncontrolled retries, and leakage of sensitive outputs. Many mitigations are model-centric and prompt-dependent, so they are brittle and do not generalize to non-LLM callers. We present Policy-First Tooling, a model-agnostic permission layer that mediates tool invocation through explicit constraints, risk-aware gating, recovery controls, and auditable explanations. The paper contributes a compact policy DSL, a runtime enforcement architecture with actionable rationale and fix hints, and a reproducible benchmark based on trace replay with controlled fault and misuse injection. In 225 controlled runs across five policy packs and three fault profiles, stricter packs improve violation prevention from 0.000 in P0 to 0.681 in P4, while task success drops from 0.356 to 0.067. Retry amplification decreases from 3.774 in P0 to 1.378 in P4, and leakage recall reaches 0.875 under injected secret outputs. These results make safety to utility trade-offs explicit and measurable.

Using fault-tolerant constructions, computations performed with unreliable components can simulate their noiseless counterparts though the introduction of a modest amount of redundancy. Given the modest overhead required to achieve fault-tolerance, and the fact that increasing the reliability of basic components often comes at a cost, are there situations where fault-tolerance may be more economical? We present a general framework to account for this overhead cost in order to effectively compare fault-tolerant to non-fault-tolerant approaches for computation, in the limit of small logical error rates. Using this detailed accounting, we determine explicit boundaries at which fault-tolerant designs become more efficient than designs that achieve comparable reliability through direct consumption of resources. We find that the fault-tolerant construction is always preferred in the limit of high reliability in cases where the resources required to construct a basic unit grows faster than log(1 / epsilon) asymptotically for small epsilon.

This position paper argues that the machine learning community should prioritize early-stage quality assurance in annotation pipelines over the prevailing practice of late-stage validation. Data quality bottlenecks increasingly limit foundation model improvement, yet quality assurance research focuses almost exclusively on validation methods rather than validation timing. When validation occurs, not merely what methods are employed, fundamentally determines both error rates and annotation costs. This temporal neglect is puzzling given the well-established "shift-left" principle from software engineering, where empirical studies demonstrate 4--100x cost multipliers for defects detected in later stages (Boehm, 1981; Shull et al., 2002). Annotation pipelines exhibit analogous dynamics: errors caught before annotation begins cost a fraction of those discovered after review cycles complete. We propose a taxonomy of three QA trigger points, namely pre-annotation (T0), post-annotation (T1), and post-review (T2), that decompose annotation workflows into discrete validation opportunities. A parametric error-propagation model formalizes when timing affects final error rates versus only economics, making timing a measurable design variable rather than a configuration afterthought. A survey of 47 recent papers reveals that only 4% report when validation occurs, a striking gap given timing's demonstrated impact in adjacent fields. Without explicit attention to QA timing, the community risks optimizing validation methods while ignoring the structural variable that may matter most. Acting on this position requires three steps: researchers should report QA timing configurations alongside validation methods; annotation platforms should expose timing as a first-class parameter; and the community should run controlled experiments that measure stage-specific detection rates directly.

Generalization, the ability to perform well beyond the training context, is a hallmark of biological and artificial intelligence, yet anticipating unseen failures remains a central challenge. Conventional approaches often take a ``bottom-up'' mechanistic route by reverse-engineering interpretable features or circuits to build explanatory models. While insightful, these methods often struggle to provide the high-level, predictive signals for anticipating failure in real-world deployment. Here, we propose using a ``top-down'' approach to studying generalization failures inspired by medical biomarkers: identifying system-level measurements that serve as robust indicators of a model's future performance. Rather than mapping out detailed internal mechanisms, we systematically design and test network markers to probe structure, function links, identify prognostic indicators, and validate predictions in real-world settings. In image classification, we find that task-relevant geometric properties of in-distribution (ID) object manifolds consistently forecast poor out-of-distribution (OOD) generalization. In particular, reductions in two geometric measures, effective manifold dimensionality and utility, predict weaker OOD performance across diverse architectures, optimizers, and datasets. We apply this finding to transfer learning with ImageNet-pretrained models. We consistently find that the same geometric patterns predict OOD transfer performance more reliably than ID accuracy. This work demonstrates that representational geometry can expose hidden vulnerabilities, offering more robust guidance for model selection and AI interpretability.

Deep learning has solved a problem that as little as five years ago was thought by many to be intractable - the automatic recognition of patterns in data; and it can do so with accuracy that often surpasses human beings. It has solved problems beyond the realm of traditional, hand-crafted machine learning algorithms and captured the imagination of practitioners trying to make sense out of the flood of data that now inundates our society. As public awareness of the efficacy of DL increases so does the desire to make use of it. But even for highly trained professionals it can be daunting to approach the rapidly increasing body of knowledge produced by experts in the field. Where does one start? How does one determine if a particular model is applicable to their problem? How does one train and deploy such a network? A primer on the subject can be a good place to start. With that in mind, we present an overview of some of the key multilayer ANNs that comprise DL. We also discuss some new automatic architecture optimization protocols that use multi-agent approaches. Further, since guaranteeing system uptime is becoming critical to many computer applications, we include a section on using neural networks for fault detection and subsequent mitigation. This is followed by an exploratory survey of several application areas where DL has emerged as a game-changing technology: anomalous behavior detection in financial applications or in financial time-series forecasting, predictive and prescriptive analytics, medical image processing and analysis and power systems research. The thrust of this review is to outline emerging areas of application-oriented research within the DL community as well as to provide a reference to researchers seeking to use it in their work for what it does best: statistical pattern recognition with unparalleled learning capacity with the ability to scale with information.

Noise is a ubiquitous feature of the physical world. As a result, the first prerequisite of life is fault tolerance: maintaining integrity of state despite external bombardment. Recent experimental advances have revealed that biological systems achieve fault tolerance by implementing mathematically intricate error-correcting codes and by organizing in a modular fashion that physically separates functionally distinct subsystems. These elaborate structures represent a vanishing volume in the massive genetic configuration space. How is it possible that the primitive process of evolution, by which all biological systems evolved, achieved such unusual results? In this work, through experiments in Boolean networks, we show that the simultaneous presence of error correction and modularity in biological systems is no coincidence. Rather, it is a typical co-occurrence in noisy dynamic systems undergoing evolution. From this, we deduce the principle of error correction enhanced evolvability: systems possessing error-correcting codes are more effectively improved by evolution than those without.

Reasoning failures in large language models (LLMs) are typically measured only at the end of a generation, yet many failures manifest as a process-level breakdown: the model "loses the thread" mid-reasoning. We study whether such breakdowns are detectable from inference-time observables available in standard APIs (token log probabilities), without any training or fine-tuning. We define a simple instability signal that combines consecutive-step distributional shift (JSD) and uncertainty (entropy), summarize each trace by its peak instability strength, and show that this signal reliably predicts failure. Across GSM8K and HotpotQA, instability strength predicts wrong answers with above-chance AUC and yields monotonic bucket-level accuracy decline at scale across model sizes. Crucially, we show that instability is not uniformly harmful: early instability can reflect subsequent stabilization and a correct final answer (corrective instability), whereas late instability is more often followed by failure (destructive instability), even at comparable peak magnitudes, indicating that recoverability depends not only on how strongly the distribution changes but also on when such changes occur relative to the remaining decoding horizon. The method is model-agnostic, training-free, and reproducible, and is presented as a diagnostic lens rather than a corrective or control mechanism.

As LLM-based Multi-Agent Systems (MAS) are increasingly deployed for complex tasks, ensuring their reliability has become a pressing challenge. Since MAS coordinate through unstructured natural language rather than rigid protocols, they are prone to semantic failures (e.g., hallucinations, misinterpreted instructions, and reasoning drift) that propagate silently without raising runtime exceptions. Prevailing evaluation approaches, which measure only end-to-end task success, offer limited insight into how these failures arise or how effectively agents recover from them. To bridge this gap, we propose MAS-FIRE, a systematic framework for fault injection and reliability evaluation of MAS. We define a taxonomy of 15 fault types covering intra-agent cognitive errors and inter-agent coordination failures, and inject them via three non-invasive mechanisms: prompt modification, response rewriting, and message routing manipulation. Applying MAS-FIRE to three representative MAS architectures, we uncover a rich set of fault-tolerant behaviors that we organize into four tiers: mechanism, rule, prompt, and reasoning. This tiered view enables fine-grained diagnosis of where and why systems succeed or fail. Our findings reveal that stronger foundation models do not uniformly improve robustness. We further show that architectural topology plays an equally decisive role, with iterative, closed-loop designs neutralizing over 40% of faults that cause catastrophic collapse in linear workflows. MAS-FIRE provides the process-level observability and actionable guidance needed to systematically improve multi-agent systems.

This paper proposes a cascading failure mitigation strategy based on Reinforcement Learning (RL). The motivation of the Multi-Stage Cascading Failure (MSCF) problem and its connection with the challenge of climate change are introduced. The bottom-level corrective control of the MCSF problem is formulated based on DCOPF (Direct Current Optimal Power Flow). Then, to mitigate the MSCF issue by a high-level RL-based strategy, physics-informed reward, action, and state are devised. Besides, both shallow and deep neural network architectures are tested. Experiments on the IEEE 118-bus system by the proposed mitigation strategy demonstrate a promising performance in reducing system collapses.

The increasing use of Machine Learning (ML) components embedded in autonomous systems -- so-called Learning-Enabled Systems (LESs) -- has resulted in the pressing need to assure their functional safety. As for traditional functional safety, the emerging consensus within both, industry and academia, is to use assurance cases for this purpose. Typically assurance cases support claims of reliability in support of safety, and can be viewed as a structured way of organising arguments and evidence generated from safety analysis and reliability modelling activities. While such assurance activities are traditionally guided by consensus-based standards developed from vast engineering experience, LESs pose new challenges in safety-critical application due to the characteristics and design of ML models. In this article, we first present an overall assurance framework for LESs with an emphasis on quantitative aspects, e.g., breaking down system-level safety targets to component-level requirements and supporting claims stated in reliability metrics. We then introduce a novel model-agnostic Reliability Assessment Model (RAM) for ML classifiers that utilises the operational profile and robustness verification evidence. We discuss the model assumptions and the inherent challenges of assessing ML reliability uncovered by our RAM and propose solutions to practical use. Probabilistic safety argument templates at the lower ML component-level are also developed based on the RAM. Finally, to evaluate and demonstrate our methods, we not only conduct experiments on synthetic/benchmark datasets but also scope our methods with case studies on simulated Autonomous Underwater Vehicles and physical Unmanned Ground Vehicles.

LLM-based agents are reshaping microservice operations into AgentOps, where benchmarks are key to evaluating failure diagnosis over multimodal observability data. However, existing benchmarks remain largely outcome-oriented: they score only the final answer and fail to assess the systematic reasoning process in failure diagnosis. We address this gap by introducing two large-scale datasets (AIOps2025 and RCA100) under a reasoning-process evaluation paradigm that assesses agentic diagnostic capability along three dimensions: Localization (where the fault occurs), Identification (what type of fault it is), and Reason (whether the reasoning trace is grounded in relevant evidence). Together, the two datasets comprise over 500 expert-labeled failure cases across two representative microservice systems (HipsterShop and the OpenTelemetry Demo Store). They cover diverse fault scenarios across resource, network, runtime, middleware/database, and application-logic categories and provide fine-grained causal evidence to support agent learning and reasoning-process evaluation. Beyond scale and coverage, the datasets have been carefully labelled by domain experts and validated through large-scale competitions, supporting more than 6,000 participating teams. This makes them not only expert-labeled diagnostic datasets, but also competition-validated benchmarks for evaluating agentic failure diagnosis in real-world microservice environments. Datasets are available at https://www.aiops.cn/gitlab/aiops-live-benchmark/agenticopseval.

The task of root cause analysis (RCA) is to identify the root causes of system faults/failures by analyzing system monitoring data. Efficient RCA can greatly accelerate system failure recovery and mitigate system damages or financial losses. However, previous research has mostly focused on developing offline RCA algorithms, which often require manually initiating the RCA process, a significant amount of time and data to train a robust model, and then being retrained from scratch for a new system fault. In this paper, we propose CORAL, a novel online RCA framework that can automatically trigger the RCA process and incrementally update the RCA model. CORAL consists of Trigger Point Detection, Incremental Disentangled Causal Graph Learning, and Network Propagation-based Root Cause Localization. The Trigger Point Detection component aims to detect system state transitions automatically and in near-real-time. To achieve this, we develop an online trigger point detection approach based on multivariate singular spectrum analysis and cumulative sum statistics. To efficiently update the RCA model, we propose an incremental disentangled causal graph learning approach to decouple the state-invariant and state-dependent information. After that, CORAL applies a random walk with restarts to the updated causal graph to accurately identify root causes. The online RCA process terminates when the causal graph and the generated root cause list converge. Extensive experiments on three real-world datasets with case studies demonstrate the effectiveness and superiority of the proposed framework.

Large Language Model (LLM) agents, which integrate planning, memory, reflection, and tool-use modules, have shown promise in solving complex, multi-step tasks. Yet their sophisticated architectures amplify vulnerability to cascading failures, where a single root-cause error propagates through subsequent decisions, leading to task failure. Current systems lack a framework that can comprehensively understand agent error in a modular and systemic way, and therefore fail to detect these errors accordingly. We address this gap with three contributions. First, we introduce the AgentErrorTaxonomy, a modular classification of failure modes spanning memory, reflection, planning, action, and system-level operations. Second, we construct AgentErrorBench, the first dataset of systematically annotated failure trajectories from ALFWorld, GAIA, and WebShop, grounding error analysis in real-world agent rollouts. Third, we propose AgentDebug, a debugging framework that isolates root-cause failures and provides corrective feedback, enabling agents to recover and iteratively improve. Experiments on AgentErrorBench show that AgentDebug achieves 24% higher all-correct accuracy and 17% higher step accuracy compared to the strongest baseline. Beyond detection, the targeted feedback generated by AgentDebug enables LLM agents to iteratively recover from failures, yielding up to 26% relative improvements in task success across ALFWorld, GAIA, and WebShop. These results establish principled debugging as a pathway to more reliable and adaptive LLM agents. The code and data will be available at https://github.com/ulab-uiuc/AgentDebug

Making language models solve constraint problems reliably often means having them translate the problem into a formal specification and delegating the search to a sound solver. But the translation is itself a language-model task, and an unfaithful translation makes the solver faithfully solve the wrong problem. Existing pipelines repair only translations that crash, returning the solver's error message and falling silent when the program runs but is wrong. We replace the error message with a proof: when the generated program is unsatisfiable, we extract a minimal unsatisfiable core over the model's own constraints and hand it back the exact set that cannot hold together, a leakage-free signal that localizes the fault. On a new benchmark of 77 problems with an exact oracle, translation to Answer Set Programming is faithful on six of seven domains and fails only on aggregate coverage scheduling, which concentrates the translation tax in one diagnosable pattern. A minimal core, rather than a bare error, is what stops a weaker model from fabricating solutions to infeasible problems, cutting fabrication from 79% to 7%. A strong chain-of-thought baseline meanwhile matches the symbolic route on accuracy, so the route's value is not accuracy but certificates and its refusal to fabricate.

Disasters are inevitable and increasingly costly, and effective response depends on querying structured tabular data: precise, information-dense records of hazard, exposure, vulnerability, and lifeline infrastructure that underpin disaster management. Current text-to-SQL methods enable natural-language access to such tables but transfer poorly to the disaster domain, where queries span heterogeneous geospatial schemas and require reasoning over causal relations. We introduce DisasterLex, a knowledge-graph-mediated framework that inserts an Expert Knowledge Graph (EKG) of curated concepts and typed causal edges between the user query and the database, bridged to schema by concept-to-table links. The orchestration runs four stages (identifying query entities, routing to the operational domain, planning over causal edges, and grounding the SQL), restricting the schema passed to the model at each step. We instantiate it on a disaster-analytics database (36 geospatial tables, 150 columns) with an EKG of 107 concepts, 117 causal edges, and 52 concept-to-schema links, evaluated on a 75-query test set. On all seven base models spanning proprietary and open-weight families, DisasterLex beats four state-of-the-art baselines (LightRAG, HippoRAG 2, ReFoRCE, CHESS) by 1.4x to 2.75x, with absolute scores of 1.65 to 3.56 (of 5.0). Error analysis shows baseline failures cluster in routing and multi-table SQL composition, the operations our orchestration explicitly addresses. Code, data, and the EKG artifact are available at https://github.com/YimingXiao98/DisasterLex and on Zenodo at https://doi.org/10.5281/zenodo.20388029.

Failure attribution in multi-agent systems -- pinpointing the exact step where a decisive error occurs -- is a critical yet unsolved challenge. Current methods treat this as a pattern recognition task over long conversation logs, leading to critically low step-level accuracy (below 17\%), which renders them impractical for debugging complex systems. Their core weakness is a fundamental inability to perform robust counterfactual reasoning: to determine if correcting a single action would have actually averted the task failure. To bridge this counterfactual inference gap, we introduce Abduct-Act-Predict (A2P) Scaffolding, a novel agent framework that transforms failure attribution from pattern recognition into a structured causal inference task. A2P explicitly guides a large language model through a formal three-step reasoning process within a single inference pass: (1) Abduction, to infer the hidden root causes behind an agent's actions; (2) Action, to define a minimal corrective intervention; and (3) Prediction, to simulate the subsequent trajectory and verify if the intervention resolves the failure. This structured approach leverages the holistic context of the entire conversation while imposing a rigorous causal logic on the model's analysis. Our extensive experiments on the Who\&When benchmark demonstrate its efficacy. On the Algorithm-Generated dataset, A2P achieves 47.46\% step-level accuracy, a 2.85times improvement over the 16.67\% of the baseline. On the more complex Hand-Crafted dataset, it achieves 29.31\% step accuracy, a 2.43times improvement over the baseline's 12.07\%. By reframing the problem through a causal lens, A2P Scaffolding provides a robust, verifiable, and significantly more accurate solution for automated failure attribution. Ours code are released at https://github.com/ResearAI/A2P.

The San Andreas Fault system, known for its frequent seismic activity, provides an extensive dataset for earthquake studies. The region's well-instrumented seismic networks have been crucial in advancing research on earthquake statistics, physics, and subsurface Earth structures. In recent years, earthquake data from California has become increasingly valuable for deep learning applications, such as Generalized Phase Detection (GPD) for phase detection and polarity determination, and PhaseNet for phase arrival-time picking. The continuous accumulation of data, particularly those manually labeled by human analysts, serves as an essential resource for advancing both regional and global deep learning models. To support the continued development of machine learning and data mining studies, we have compiled a unified California Earthquake Event Dataset (CEED) that integrates seismic records from the Northern California Earthquake Data Center (NCEDC) and the Southern California Earthquake Data Center (SCEDC). The dataset includes both automatically and manually determined parameters such as earthquake origin time, source location, P/S phase arrivals, first-motion polarities, and ground motion intensity measurements. The dataset is organized in an event-based format organized by year spanning from 2000 to 2024, facilitating cross-referencing with event catalogs and enabling continuous updates in future years. This comprehensive open-access dataset is designed to support diverse applications including developing deep learning models, creating enhanced catalog products, and research into earthquake processes, fault zone structures, and seismic risks.

AI agents are increasingly used to solve complex, multi-step tasks, but existing multi-agent frameworks remain brittle as workflows grow in scale and depth. Small errors at intermediate stages can propagate through agent interactions, while insufficient grounding and weak verification mechanisms further limit reliability. We present Meta-Agent, a two-phase framework that automatically constructs and executes specialized multi-agent systems from natural-language task descriptions. In the construction phase, a task planner decomposes a problem into a directed acyclic graph of agent specifications with explicit input/output contracts and verification criteria. A web search module grounds each specification with external evidence, and a code generation module produces system prompts and tool configurations. A construction-time verification stage then validates generated artifacts and triggers targeted regeneration when failures are detected. In the execution phase, a coordinator dispatches subtasks across the agent graph while execution-time verification gates intermediate outputs. We further introduce a three-level error attribution mechanism that distinguishes local, upstream, and structural failures, enabling targeted recovery strategies ranging from localized retries to partial re-execution and re-decomposition. We evaluate Meta-Agent across coding, contextual learning, and open-ended reasoning tasks. Experiments against strong multi-agent baselines and ablation studies demonstrate consistent improvements in task success rate, error recovery, and workflow stability. The results highlight the importance of tightly integrating planning, grounding, and verification for building reliable multi-agent systems.

Large Reasoning Models (LRMs) have achieved remarkable success on reasoning-intensive tasks such as mathematics and programming. However, their enhanced reasoning capabilities do not necessarily translate to improved safety performance-and in some cases, may even degrade it. This raises an important research question: how can we enhance the safety of LRMs? In this paper, we present a comprehensive empirical study on how to enhance the safety of LRMs through Supervised Fine-Tuning (SFT). Our investigation begins with an unexpected observation: directly distilling safe responses from DeepSeek-R1 fails to significantly enhance safety. We analyze this phenomenon and identify three key failure patterns that contribute to it. We then demonstrate that explicitly addressing these issues during the data distillation process can lead to substantial safety improvements. Next, we explore whether a long and complex reasoning process is necessary for achieving safety. Interestingly, we find that simply using short or template-based reasoning process can attain comparable safety performance-and are significantly easier for models to learn than more intricate reasoning chains. These findings prompt a deeper reflection on the role of reasoning in ensuring safety. Finally, we find that mixing math reasoning data during safety fine-tuning is helpful to balance safety and over-refusal. Overall, we hope our empirical study could provide a more holistic picture on enhancing the safety of LRMs. The code and data used in our experiments are released in https://github.com/thu-coai/LRM-Safety-Study.

The widespread use of neural networks across different scientific domains often involves constraining them to satisfy certain symmetries, conservation laws, or other domain knowledge. Such constraints are often imposed as soft penalties during model training and effectively act as domain-specific regularizers of the empirical risk loss. Physics-informed neural networks is an example of this philosophy in which the outputs of deep neural networks are constrained to approximately satisfy a given set of partial differential equations. In this work we review recent advances in scientific machine learning with a specific focus on the effectiveness of physics-informed neural networks in predicting outcomes of physical systems and discovering hidden physics from noisy data. We will also identify and analyze a fundamental mode of failure of such approaches that is related to numerical stiffness leading to unbalanced back-propagated gradients during model training. To address this limitation we present a learning rate annealing algorithm that utilizes gradient statistics during model training to balance the interplay between different terms in composite loss functions. We also propose a novel neural network architecture that is more resilient to such gradient pathologies. Taken together, our developments provide new insights into the training of constrained neural networks and consistently improve the predictive accuracy of physics-informed neural networks by a factor of 50-100x across a range of problems in computational physics. All code and data accompanying this manuscript are publicly available at https://github.com/PredictiveIntelligenceLab/GradientPathologiesPINNs.

The adoption of deep neural networks (DNNs) in safety-critical domains has engendered serious reliability concerns. A prominent example is hardware transient faults that are growing in frequency due to the progressive technology scaling, and can lead to failures in DNNs. This work proposes Ranger, a low-cost fault corrector, which directly rectifies the faulty output due to transient faults without re-computation. DNNs are inherently resilient to benign faults (which will not cause output corruption), but not to critical faults (which can result in erroneous output). Ranger is an automated transformation to selectively restrict the value ranges in DNNs, which reduces the large deviations caused by critical faults and transforms them to benign faults that can be tolerated by the inherent resilience of the DNNs. Our evaluation on 8 DNNs demonstrates Ranger significantly increases the error resilience of the DNNs (by 3x to 50x), with no loss in accuracy, and with negligible overheads.

Multi-agent systems (MAS) are increasingly capable of tackling complex real-world tasks, yet their reliance on inter-agent coordination, tool use, and long-horizon reasoning makes error recognition particularly challenging. Minor errors can propagate across agents, escalating into task failures while producing long, intertwined execution trajectories that impose significant costs for both human developers and automated systems to debug and analyze. Our key insight is that, despite surface differences in failure trajectories (e.g., logs), MAS errors often recur with similar structural patterns. This paper presents CORRECT, the first lightweight, training-free framework that leverages an online cache of distilled error schemata to recognize and transfer knowledge of failure structures across new requests. This cache-based reuse allows LLMs to perform targeted error localization at inference time, avoiding the need for expensive retraining while adapting to dynamic MAS deployments in subseconds. To support rigorous study in this domain, we also introduce CORRECT-Error, a large-scale dataset of over 2,000 annotated trajectories collected through a novel error-injection pipeline guided by real-world distributions, and further validated through human evaluation to ensure alignment with natural failure patterns. Experiments across seven diverse MAS applications show that CORRECT improves step-level error localization up to 19.8% over existing advances while at near-zero overhead, substantially narrowing the gap between automated and human-level error recognition.

Modern multi-agent knowledge systems increasingly accumulate knowledge through chains of autonomous transformations rather than direct retrieval. Existing provenance work records what happened - execution traces, tool calls, evidence links - and source-reliability estimation is long established (truth discovery, reputation systems). What is missing is an operational framework that attaches graded, per-domain transmitter reliability to claim-level transmission chains, with completeness semantics, transformation-typed aggregation, decoupled content criticism, and serve/review/quarantine routing. Classical Islamic hadith science confronted a structurally similar problem: deciding whether knowledge transmitted through chains of human narrators should be accepted. Over centuries it developed a rigorous methodology - isnad (a complete transmission chain attached to every claim), rijal (systematic grading of each narrator's integrity and precision), weakest-link chain evaluation, corroboration through independent chains, and matn criticism (content evaluated independently of chain quality). This paper transfers that methodology to AI system design. We contribute a formal mapping from hadith-science concepts to multi-agent pipelines, a relational schema implementing claim chains and a graded narrator registry, a decision matrix combining chain grade with content criticism, and an evaluation on 20,000 claims from real physics textbooks. The evaluation validates weakest-link quarantine and independent-chain corroboration; reports a partial failure of the grade-recovery loop, which missed the highest-fault narrator; and reports two analyses as inconclusive, including a matched-coverage comparison the framework could not reach with the reference content critic. The paper is explicit throughout about which claims the evidence does and does not yet support.

Multi-agent systems (MAS) are critical for automating complex tasks, yet their practical deployment is severely hampered by the challenge of failure attribution. Current diagnostic tools, which rely on statistical correlations, are fundamentally inadequate; on challenging benchmarks like Who\&When, state-of-the-art methods achieve less than 15\% accuracy in locating the root-cause step of a failure. To address this critical gap, we introduce the first failure attribution framework for MAS grounded in multi-granularity causal inference. Our approach makes two key technical contributions: (1) a performance causal inversion principle, which correctly models performance dependencies by reversing the data flow in execution logs, combined with Shapley values to accurately assign agent-level blame; (2) a novel causal discovery algorithm, CDC-MAS, that robustly identifies critical failure steps by tackling the non-stationary nature of MAS interaction data. The framework's attribution results directly fuel an automated optimization loop, generating targeted suggestions whose efficacy is validated via counterfactual simulations. Evaluations on the Who\&When and TRAIL benchmarks demonstrate a significant leap in performance. Our method achieves up to 36.2\% step-level accuracy. Crucially, the generated optimizations boost overall task success rates by an average of 22.4\%. This work provides a principled and effective solution for debugging complex agent interactions, paving the way for more reliable and interpretable multi-agent systems.

We might hope that when faced with unexpected inputs, well-designed software systems would fire off warnings. Machine learning (ML) systems, however, which depend strongly on properties of their inputs (e.g. the i.i.d. assumption), tend to fail silently. This paper explores the problem of building ML systems that fail loudly, investigating methods for detecting dataset shift, identifying exemplars that most typify the shift, and quantifying shift malignancy. We focus on several datasets and various perturbations to both covariates and label distributions with varying magnitudes and fractions of data affected. Interestingly, we show that across the dataset shifts that we explore, a two-sample-testing-based approach, using pre-trained classifiers for dimensionality reduction, performs best. Moreover, we demonstrate that domain-discriminating approaches tend to be helpful for characterizing shifts qualitatively and determining if they are harmful.

We introduce GeoFWI3D, a large-scale open-source benchmark dataset of geologically plausible 3D subsurface models designed to accelerate deep learning (DL) assisted seismic imaging and full waveform inversion (FWI). FWI is a physics-driven, wave-equation-based optimization technique used in seismic imaging to estimate the subsurface properties. However, traditional FWI is highly non-linear, non-unique, and ill-posed. The iterative process often converges to local minima when the starting model is insufficiently accurate. Most importantly, 3D FWI is prohibitively expensive. With the advent of DL, a direct mapping between the shot gathers and subsurface properties can be established by training a network on realistic models. The primary bottleneck for such approaches is the lack of large-scale, realistic training datasets. GeoFWI3D addresses this gap with 10,000 geologically diverse velocity models at 96x96x96 resolution, spanning four structural complexity classes: pure stratigraphy, faulted networks, salt diapirism, and complex coupled fault-salt systems. Each model is accompanied by co-registered multi-modal labels including compressional velocity (Vp), zero-offset seismic reflectivity, relative geologic time (RGT), and semantic fault/salt masks. To facilitate systematic evaluation, we introduce benchmark tasks covering fault detection, joint salt body segmentation and chronostratigraphy prediction, FWI, wavefield and traveltime surrogates using neural operators, and generative modeling with a 3D diffusion model. We present baseline results for each task to establish reference performance metrics for future users. The dataset is publicly available under Creative Commons Attribution 4.0 International.

Failure attribution for LLM-based agentic systems, i.e., identifying which steps in a failure trajectory caused the task to fail, is critical for debugging and improving these systems. Existing approaches either rely on prompting-based pipelines, which are computationally expensive, or require post-training on failure trajectories with step-level error annotations, which are costly to collect and difficult to scale. We argue that a practical failure attribution model should be lightweight and trainable without step-level supervision on failure data. To this end, we address unsupervised failure attribution, i.e., training exclusively on successful trajectories and identifying error steps at inference time given a failure trajectory. We propose OAT, which casts this problem as one-class learning with neural controlled differential equations, modeling the dynamical pattern of successful trajectories in latent space. At inference time, each step in a failure trajectory is assigned an anomaly score based on its deviation from the dynamics learned on successful trajectories, which is then used to form a set of error steps. With training on only 100 successful trajectories, experiments show that OAT is 200--5000 times faster than prompting-based baselines, and, at the same time, consistently outperforms them in both in-domain and out-of-distribution datasets with +20% and +7% F1 scores, respectively, demonstrating that OAT is a promising and efficient direction for diagnosing agentic system failures.

Phase-field models provide a versatile framework for simulating fracture nucleation and propagation without explicit crack tracking. Their principal computational challenge is the need to resolve a small regularization length with a sufficiently fine finite element mesh. This requirement can render uniform-mesh simulations prohibitively expensive, particularly for three-dimensional problems, problems involving distributed crack nucleation, and soft nearly incompressible materials. Adaptive mesh refinement offers a natural means of reducing this cost, but existing approaches often rely on heuristic refinement indicators, are primarily designed for problems containing pre-existing cracks, and retain increasingly large refined regions as cracks grow in size. This work presents an adaptive mesh coarsening framework along with adaptive mesh refinement for phase-field fracture. The coarsening strategy replaces the fractured region in the crack wake with a coarse crack band that preserves the essential mechanical behavior of a crack, making it necessary to have a refined mesh only in a small region near the tip of the growing crack. The method introduces a physics-based refinement indicator derived from the violation of the material strength surface, which is a necessary condition for fracture evolution. The indicator therefore robustly identifies regions where crack nucleation or propagation is imminent and can be applied across arbitrary materials, geometries, and loading conditions. The framework is implemented in parallel within FEniCSx; the supporting finite element codes are made available. Its generality and substantial computational benefit are demonstrated through benchmark problems involving crack propagation and nucleation under quasi-static and dynamic loading, for soft and hard materials, and for thermomechanical fracture.

The capability of LLM agents to function as the ``brain'' of a system fundamentally expands the scope of analysis beyond a standalone model. Consequently, safety is no longer only about input--output content alignment. It also concerns system behavior and real-world execution outcomes. However, the current literature is fragmented across attack types, applications, and benchmarks. This makes it hard to explain why failures such as prompt injection, tool misuse, and memory poisoning often share the same structural cause, and how they spread through an agent workflow. In this survey, we treat isolation as a first-class principle for LLM-agent system safety. By isolation, we refer to the separation of user inputs, tool access, execution channels, inter-agent communication, and environment-originated context. We organize the literature with a boundary-centric taxonomy of five boundaries: user-agent, agent-tool, agent-execution, agent-agent, and system-environment. This view helps identify where the loss of isolation first occurs, how compromise propagates across boundaries, and which defenses are most relevant at each interface. We also summarize cross-boundary failure paths, discuss open challenges, and outline a research agenda for isolation-by-construction in future agent systems.

Deployed multimodal systems can fail in ways that evaluators did not anticipate. In order to find these failures before deployment, we introduce MultiMon, a system that automatically identifies systematic failures -- generalizable, natural-language descriptions of patterns of model failures. To uncover systematic failures, MultiMon scrapes a corpus for examples of erroneous agreement: inputs that produce the same output, but should not. It then prompts a language model (e.g., GPT-4) to find systematic patterns of failure and describe them in natural language. We use MultiMon to find 14 systematic failures (e.g., "ignores quantifiers") of the CLIP text-encoder, each comprising hundreds of distinct inputs (e.g., "a shelf with a few/many books"). Because CLIP is the backbone for most state-of-the-art multimodal systems, these inputs produce failures in Midjourney 5.1, DALL-E, VideoFusion, and others. MultiMon can also steer towards failures relevant to specific use cases, such as self-driving cars. We see MultiMon as a step towards evaluation that autonomously explores the long tail of potential system failures. Code for MULTIMON is available at https://github.com/tsb0601/MultiMon.

With the rapid evolution of Large Language Models (LLMs) and their large-scale experimentation in cloud-computing spaces, the challenge of guaranteeing their security and efficiency in a failure scenario has become a main issue. To ensure the reliability and availability of large-scale language models in cloud computing scenarios, such as frequent resource failures, network problems, and computational overheads, this study proposes a novel adaptive fault tolerance mechanism. It builds upon known fault-tolerant mechanisms, such as checkpointing, redundancy, and state transposition, introducing dynamic resource allocation and prediction of failure based on real-time performance metrics. The hybrid model integrates data driven deep learning-based anomaly detection technique underlining the contribution of cloud orchestration middleware for predictive prevention of system failures. Additionally, the model integrates adaptive checkpointing and recovery strategies that dynamically adapt according to load and system state to minimize the influence on the performance of the model and minimize downtime. The experimental results demonstrate that the designed model considerably enhances the fault tolerance in large-scale cloud surroundings, and decreases the system downtime by 30%, and has a better modeling availability than the classical fault tolerance mechanism.

Monitoring complex industrial assets relies on engineer-authored symbolic rules that trigger based on sensor conditions and prompt technicians to perform corrective actions. The bottleneck is not detection but response: translating rules into maintenance steps requires asset-specific knowledge gained through years of practice. We investigate whether LLMs can serve as decision support for this rule-to-action step and introduce , a benchmark of 6{,}690 expert-validated multiple-choice questions from 118 rule-action pairs across 16 asset types. We contribute (i) a symbolic-to-MCQA pipeline normalizing rules to Disjunctive Normal Form with embedding-based distractor sampling, (ii) five variants probing distinct failure modes (Pro, Pert, Verbose, Aug, Rationale), and (iii) a benchmark of 29 LLMs and 4 embedding baselines. A human evaluation (9 practitioners, mean 45.0\%) confirms requires specialist knowledge beyond operational experience. Three findings stand out. The frontier has closed: the top three LLMs lie within one Macro point, with Bradley-Terry Elo placing claude-opus-4-6 30 points above the next model. Yet \,Pro exposes brittleness, with every model losing 13--60\% relative accuracy under distractor expansion. \,Aug exposes pattern-matching: under condition inversion, frontier models still select the original answer 49--63\% of the time. The deployment bottleneck is not capability but calibration: frontier models handle template-style fault detection but break under structural perturbation.

As modern microservice systems grow increasingly popular and complex-often consisting of hundreds or even thousands of fine-grained, interdependent components-they are becoming more susceptible to frequent and subtle failures. Ensuring system reliability therefore hinges on accurate and efficient failure localization. Traditional failure localization approaches based on small models lack the flexibility to adapt to diverse failure scenarios, while recent LLM-based methods suffer from two major limitations: they often rely on rigid invocation workflows that constrain the model's ability to dynamically explore optimal localization paths, and they require resource-intensive inference, making them cost-prohibitive for real-world deployment. To address these challenges, we explore the use of reinforcement fine-tuning to equip lightweight LLMs with reasoning and self-refinement capabilities, significantly improving the cost-effectiveness and adaptability of LLM-based failure localization. We begin with an empirical study to identify three key capabilities essential for accurate localization. Building on these insights, we propose a progressive multi-stage GRPO fine-tuning framework, which integrates a multi-factor failure localization grader and a recursion-of-thought actor module. The resulting model, ThinkFL, not only outperforms existing state-of-the-art LLMs and baseline methods in localization accuracy but also reduces end-to-end localization latency from minutes to seconds, demonstrating strong potential for real-world applications.

We study neural network loss landscapes through the lens of mode connectivity, the observation that minimizers of neural networks retrieved via training on a dataset are connected via simple paths of low loss. Specifically, we ask the following question: are minimizers that rely on different mechanisms for making their predictions connected via simple paths of low loss? We provide a definition of mechanistic similarity as shared invariances to input transformations and demonstrate that lack of linear connectivity between two models implies they use dissimilar mechanisms for making their predictions. Relevant to practice, this result helps us demonstrate that naive fine-tuning on a downstream dataset can fail to alter a model's mechanisms, e.g., fine-tuning can fail to eliminate a model's reliance on spurious attributes. Our analysis also motivates a method for targeted alteration of a model's mechanisms, named connectivity-based fine-tuning (CBFT), which we analyze using several synthetic datasets for the task of reducing a model's reliance on spurious attributes.

The dynamics of materials failure is one of the most critical phenomena in a range of scientific and engineering fields, from healthcare to structural materials to transportation. In this paper we propose a specially designed deep neural network, DyFraNet, which can predict dynamic fracture behaviors by identifying a complete history of fracture propagation - from cracking onset, as a crack grows through the material, modeled as a series of frames evolving over time and dependent on each other. Furthermore, this model can not only forecast future fracture processes but also backcast to elucidate the past fracture history. In this scenario, once provided with the outcome of a fracture event, the model will elucidate past events that led to this state and will predict the future evolution of the failure process. By comparing the predicted results with atomistic-level simulations and theory, we show that DyFraNet can capture dynamic fracture mechanics by accurately predicting how cracks develop over time, including measures such as the crack speed, as well as when cracks become unstable. We use GradCAM to interpret how DyFraNet perceives the relationship between geometric conditions and fracture dynamics and we find DyFraNet pays special attention to the areas around crack tips, which have a critical influence in the early stage of fracture propagation. In later stages, the model pays increased attention to the existing or newly formed damage distribution in the material. The proposed approach offers significant potential to accelerate the exploration of the dynamics in material design against fracture failures and can be beneficially adapted for all kinds of dynamical engineering problems.

LLM agents are increasingly explored for automating root cause analysis (RCA) in cloud-native systems, creating a need to evaluate both diagnostic correctness and the quality of the supporting investigation. Existing static benchmarks offer repeatable inputs but limited system-facing interaction, while live testbeds expose realistic tools but hinder controlled comparison because incident evidence varies across runs; both paradigms focus primarily on final answers. To address these limitations, we present Cloud-OpsBench, an evaluation infrastructure for interactive and evidence-grounded cloud RCA. It comprises 754 runtime-verified cases across 57 fault types on two microservice workloads spanning application services and Kubernetes platform layers. Each fault is captured as a state snapshot and replayed through standard diagnostic interfaces, with outcome labels and diagnostic evidence graphs that enable matched comparisons and process-level analysis. Across ten LLM agents, the strongest Joint RCA Accuracy (JRA) reaches 0.76 on OnlineBoutique and 0.68 on TrainTicket, while the corresponding Evidence Closure Rates (ECR) are only 0.38 and 0.15. This outcome--process gap shows that final-answer correctness alone substantially overestimates agents' ability to perform evidence-grounded diagnosis.

We formalize prefix invariance: representations at position t must not depend on future inputs. We give a lightweight audit, two forward passes, no training or gradients, that localizes exactly where causality breaks. Attention-mask inspection is incomplete: leaks can occur via scans or normalization despite correct masks. Across 192 injected-fault trials on eight checkpoints, mask inspection found none, while our audit localized all 192/192, also finding a defect in Zamba2 and Nemotron-H.

Earthquake hazard analysis and design of spatially distributed infrastructure, such as power grids and energy pipeline networks, require scenario-specific ground-motion time histories with realistic frequency content and spatiotemporal coherence. However, producing the large ensembles needed for uncertainty quantification with physics-based simulations is computationally intensive and impractical for engineering workflows. To address this challenge, we introduce Ground-Motion Flow (GMFlow), a physics-inspired latent operator flow matching framework that generates realistic, large-scale regional ground-motion time-histories conditioned on physical parameters. Validated on simulated earthquake scenarios in the San Francisco Bay Area, GMFlow generates spatially coherent ground motion across more than 9 million grid points in seconds, achieving a 10,000-fold speedup over the simulation workflow, which opens a path toward rapid and uncertainty-aware hazard assessment for distributed infrastructure. More broadly, GMFlow advances mesh-agnostic functional generative modeling and could potentially be extended to the synthesis of large-scale spatiotemporal physical fields in diverse scientific domains.

Ensuring the reliability of agent architectures and effectively identifying problematic agents when failures occur are crucial challenges in multi-agent systems (MAS). Advances in large language models (LLMs) have established LLM-based agents as a major branch of MAS, enabling major breakthroughs in complex problem solving and world modeling. However, the reliability implications of this shift remain largely unexplored. i.e., whether substituting traditional agents with LLM-based agents can effectively enhance the reliability of MAS. In this work, we investigate and quantify the reliability of LLM-based agents from the perspective of Byzantine fault tolerance. We observe that LLM-based agents demonstrate stronger skepticism when processing erroneous message flows, a characteristic that enables them to outperform traditional agents across different topological structures. Motivated by the results of the pilot experiment, we design CP-WBFT, a confidence probe-based weighted Byzantine Fault Tolerant consensus mechanism to enhance the stability of MAS with different topologies. It capitalizes on the intrinsic reflective and discriminative capabilities of LLMs by employing a probe-based, weighted information flow transmission method to improve the reliability of LLM-based agents. Extensive experiments demonstrate that CP-WBFT achieves superior performance across diverse network topologies under extreme Byzantine conditions (85.7\% fault rate). Notably, our approach surpasses traditional methods by attaining remarkable accuracy on various topologies and maintaining strong reliability in both mathematical reasoning and safety assessment tasks.

Climate-vulnerable road networks require a paradigm shift from reactive, fix-on-failure repairs to predictive, decision-ready maintenance. This paper introduces ST-ResGAT, a novel Spatio-Temporal Residual Graph Attention Network that fuses residual graph-attention encoding with GRU temporal aggregation to forecast pavement deterioration. Engineered for resource-constrained deployment, the framework translates continuous Pavement Condition Index (PCI) forecasts directly into the American Society for Testing and Materials (ASTM)-compliant maintenance priorities. Using a real-world inspection dataset of 750 segments in Sylhet, Bangladesh (2021-2024), ST-ResGAT significantly outperforms traditional non-spatial machine learning baselines, achieving exceptional predictive fidelity (R2 = 0.93, RMSE = 2.72). Crucially, ablation testing confirmed the mathematical necessity of modeling topological neighbor effects, proving that structural decay acts as a spatial contagion. Uniquely, we integrate GNNExplainer to unbox the model, demonstrating that its learned priorities align perfectly with established physical engineering theory. Furthermore, we quantify classification safety: achieving 85.5% exact ASTM class agreement and 100% adjacent-class containment, ensuring bounded, engineer-safe predictions. To connect model outputs to policy, we generate localized longitudinal maintenance profiles, perform climate stress-testing, and derive Pareto sustainability frontiers. ST-ResGAT therefore offers a practical, explainable, and sustainable blueprint for intelligent infrastructure management in high-risk, low-resource geological settings.

Solving topological grid puzzles requires reasoning over global spatial invariants such as connectivity, loop closure, and region symmetry and remains challenging for even the most powerful large language models (LLMs). To study these abilities under controlled settings, we introduce TopoBench, a benchmark of six puzzle families across three difficulty levels. We evaluate strong reasoning LLMs on TopoBench and find that even frontier models solve fewer than one quarter of hard instances, with two families nearly unsolved. To investigate whether these failures stem from reasoning limitations or from difficulty extracting and maintaining spatial constraints, we annotate 750 chain of thought traces with an error taxonomy that surfaces four candidate causal failure modes, then test them with targeted interventions simulating each error type. These interventions show that certain error patterns like premature commitment and constraint forgetting have a direct impact on the ability to solve the puzzle, while repeated reasoning is a benign effect of search. Finally we study mitigation strategies including prompt guidance, cell-aligned grid representations and tool-based constraint checking, finding that the bottleneck lies in extracting constraints from spatial representations and not in reasoning over them. Code and data are available at github.com/mayug/topobench-benchmark.

Counterexample-guided repair aims at creating neural networks with mathematical safety guarantees, facilitating the application of neural networks in safety-critical domains. However, whether counterexample-guided repair is guaranteed to terminate remains an open question. We approach this question by showing that counterexample-guided repair can be viewed as a robust optimisation algorithm. While termination guarantees for neural network repair itself remain beyond our reach, we prove termination for more restrained machine learning models and disprove termination in a general setting. We empirically study the practical implications of our theoretical results, demonstrating the suitability of common verifiers and falsifiers for repair despite a disadvantageous theoretical result. Additionally, we use our theoretical insights to devise a novel algorithm for repairing linear regression models based on quadratic programming, surpassing existing approaches.

Large language models (LLMs) can call tools effectively, yet they remain brittle in multi-turn execution: following a tool call error, smaller models often degenerate into repetitive invalid re-invocations, failing to interpret error feedback and self-correct. This brittleness hinders reliable real-world deployment, where the execution errors are inherently inevitable during tool interaction procedures. We identify a key limitation of current approaches: standard reinforcement learning (RL) treats errors as sparse negative rewards, providing no guidance on how to recover, while pre-collected synthetic error-correction datasets suffer from distribution mismatch with the model's on-policy error modes. To bridge this gap, we propose Fission-GRPO, a framework that converts execution errors into corrective supervision within the RL training loop. Our core mechanism fissions each failed trajectory into a new training instance by augmenting it with diagnostic feedback from a finetuned Error Simulator, then resampling recovery rollouts on-policy. This enables the model to learn from the precise errors it makes during exploration, rather than from static, pre-collected error cases. On the BFCL v4 Multi-Turn, Fission-GRPO improves the error recovery rate of Qwen3-8B by 5.7% absolute, crucially, yielding a 4% overall accuracy gain (42.75% to 46.75%) over GRPO and outperforming specialized tool-use agents.

We propose a new approach for propagating stable probability distributions through neural networks. Our method is based on local linearization, which we show to be an optimal approximation in terms of total variation distance for the ReLU non-linearity. This allows propagating Gaussian and Cauchy input uncertainties through neural networks to quantify their output uncertainties. To demonstrate the utility of propagating distributions, we apply the proposed method to predicting calibrated confidence intervals and selective prediction on out-of-distribution data. The results demonstrate a broad applicability of propagating distributions and show the advantages of our method over other approaches such as moment matching.

LLM failures in causal reasoning, including sycophancy, rung collapse, and miscalibrated refusal, are well-documented, yet progress on remediation is slow because no benchmark enables systematic diagnosis. We introduce CausalT5K, a diagnostic benchmark of over 5,000 cases across 10 domains that tests three critical capabilities: (1) detecting rung collapse, where models answer interventional queries with associational evidence; (2) resisting sycophantic drift under adversarial pressure; and (3) generating Wise Refusals that specify missing information when evidence is underdetermined. Unlike synthetic benchmarks, CausalT5K embeds causal traps in realistic narratives and decomposes performance into Utility (sensitivity) and Safety (specificity), revealing failure modes invisible to aggregate accuracy. Developed through a rigorous human-machine collaborative pipeline involving 40 domain experts, iterative cross-validation cycles, and composite verification via rule-based, LLM, and human scoring, CausalT5K implements Pearl's Ladder of Causation as research infrastructure. Preliminary experiments reveal a Four-Quadrant Control Landscape where static audit policies universally fail, a finding that demonstrates CausalT5K's value for advancing trustworthy reasoning systems. Repository: https://github.com/genglongling/CausalT5kBench

A cumulative variational framework for solid deformation is proposed. Its central organizing principle is the recursive combination of three structural components of one material body: a compatible Cosserat component, a distributed-incompatibility component, and a defect-source component. At any prescribed external condition these components constitute a combined material state. They are governed under common physical boundary and initial conditions and are coupled through one cumulative energy and the associated field equations. They are not separate boundary-value problems and need not appear in a prescribed temporal sequence. The cumulative character of the framework concerns the response of the combined state to variation of externally prescribed conditions. For the special case of an initially perfect body, loss of stability may produce successive branches with defect and then source participation. Such a sequence is a bifurcation property of the selected initial state and constitutive energy, rather than a defining hierarchy of the framework. A one-dimensional specialization illustrates structural bifurcation, residual deformation and residual stress produced by retained structure, dependence on the initial combined state, directional memory under reverse loading, parametric cumulative hysteresis, and changes of observable tangent stiffness associated with structural stabilization. A spatial extension introduces defect and source gradient terms and yields a size-dependent structural stability operator. For the stable quartic energy considered, the gradient terms regularize nonuniform perturbations but do not by themselves generate a finite-wavelength localization instability on an already stable three-component branch. The examples thereby distinguish consequences of the cumulative structure and energy from phenomena requiring additional constitutive evolution laws.

This paper bridges distribution shift and AI safety through a comprehensive analysis of their conceptual and methodological synergies. While prior discussions often focus on narrow cases or informal analogies, we establish two types connections between specific causes of distribution shift and fine-grained AI safety issues: (1) methods addressing a specific shift type can help achieve corresponding safety goals, or (2) certain shifts and safety issues can be formally reduced to each other, enabling mutual adaptation of their methods. Our findings provide a unified perspective that encourages fundamental integration between distribution shift and AI safety research.

Benign fine-tuning severely weakens the safety alignment of large language models (LLMs), so we study why refusal behavior is so fragile. While prior work often attributes this failure to gradient conflict, we propose a fundamentally different Fisher-geometric explanation: safety Fisher is low-rank, and alignment makes the safety geometry flatter while preserving an output-routing pathway. After 100 benign fine-tuning examples, this pathway is selectively re-sharpened in output-side MLP modules, explaining the asymmetric fragility: safety can collapse to high attack success rates, while general utility degrades mildly. The routing view also explains why few safety examples can restore refusal behavior, indicating that internal safety-relevant representations are preserved. Finally, we show that LoRA and ASAM mitigate early collapse by suppressing output-side sharpness, but their protection weakens at larger fine-tuning scales. Overall, safety failure is best understood as a disruption of a low-rank output-routing mechanism

As Large Language Models shift the programming toward human-guided ''vibe coding'', agentic coding tools increasingly rely on models to self-diagnose and repair their own subtle faults -- a capability central to autonomous software engineering yet never systematically evaluated. We present , the first empirical decomposition that jointly evaluates two coupled tasks: Fault-Triggering Test Generation (FT-Test) constructing a discriminative witness that exposes a latent bug, and Fault-targeted Program Repair (FPR), repairing it under varying diagnostic conditions. pairs competitive programming problems with LLM-generated solutions that pass partial test suites but fail on semantic edge cases, enabling controlled identification of where the diagnostic chain breaks down. Evaluating 12 frontier LLMs, we find that fault-targeted reasoning does not scale with general coding ability. Models produce syntactically valid test inputs at near-ceiling rates yet collapse on discriminative generation, with fault hypothesis generation -- not output validation -- as the dominant bottleneck. Test-guided repair reveals a complementary insight: when self-generated tests successfully witness a fault, the resulting repair matches or outperforms repair guided by externally provided tests, but tests that fail to witness the fault actively degrade repair below unguided baselines. Together, these results reframe the challenge of autonomous debugging: the binding bottleneck is not code synthesis or test validity but fault-target reasoning, a capability that remains deficient across all frontier models. As Large Language Models shift the programming toward human-guided ''vibe coding'', agentic coding tools increasingly rely on models to self-diagnose and repair their own subtle faults -- a capability central to autonomous software engineering yet never systematically evaluated.

How do multi-turn reasoning systems fail? The expected answer is logical contradiction, in which the system's maintained state becomes unsatisfiable. We show that the dominant mode is instead satisfiable drift, where the internal state stays consistent while the returned answer silently violates prior commitments. We build DRIFT-Bench (Decomposing Reasoning Into Failure Types), a solver-instrumented benchmark of 816 test problems across three constraint domains, and evaluate four methods on it across four open-weight models (8B-120B parameters). MUS-Repair, which feeds minimal unsatisfiable subsets back to the generator, is strongest in every setting (+1.8 to +15.0 pp over the best non-MUS baseline). But the central finding is what repair leaves behind. After structured feedback, models rarely contradict themselves. They forget. Residual errors are 98-100% satisfiable drift across all settings, while contradiction drops to near zero. Reliable multi-turn systems must separately validate that the returned answer respects the maintained state. Code is available at https://github.com/kaons-research/drift-bench.

We develop analytical and particle-based methods for uncertainty propagation in random neural network models, where both the inputs and network parameters are allowed to be random. Building on the piecewise-linear structure of the Leaky ReLU activation function, we derive a local approximation of the neural network output with respect to perturbations in both its inputs and parameters. This approximation is exact for perturbations that preserve the network activation pattern, and it allows us to compute analytical expressions for the probability density function and characteristic function of the network output, together with closed-form approximations for its mean and covariance. We extend this uncertainty propagation framework to autonomous dynamical systems whose one-step evolution map is represented by a random neural network. Repeated application of this map defines an autoregressive model, for which we derive recursive equations to propagate uncertainty in both the state and network parameters over time. These equations explicitly account for the state-parameter cross-covariance that develops under successive iterations of the network. Numerical experiments on the Lorenz-63 system and the Kuramoto-Sivashinsky equation demonstrate accurate uncertainty propagation through the predictability horizon and the applicability of the proposed framework to high-dimensional dynamical systems.

Tool-using agents make consequential changes to external state, yet correct outcomes do not guarantee that their actions were supported by evidence established beforehand. We study where this evidence-to-action chain breaks as agents move from deciding whether to act to executing single actions and dependent workflows. Across ten model-harness configurations, strong static action assessment can coexist with much weaker interactive execution. Failures often begin before execution: agents stop with incomplete investigation or act before required evidence is established. Once required evidence is obtained, single-action execution is usually reliable, while multi-action workflows additionally expose unresolved prerequisites and incomplete execution. For this analysis, we introduce SafeActBench, comprising 656 cases across six operational domains and five protocols that progress from static action judgment and investigated non-action to single- and multi-action workflows. A provenance-bound Evidence Ledger and deterministic trajectory evaluator track what information was established, when actions occurred, and whether downstream dependencies were satisfied. These results show that failures arise not only from missing information, but also from how agents use established evidence when deciding and executing actions.

We propose Zero-Error Horizon (ZEH) for trustworthy LLMs, which represents the maximum range that a model can solve without any errors. While ZEH itself is simple, we demonstrate that evaluating the ZEH of state-of-the-art LLMs yields abundant insights. For example, by evaluating the ZEH of GPT-5.2, we found that GPT-5.2 cannot even compute the parity of a short string like 11000, and GPT-5.2 cannot determine whether the parentheses in ((((()))))) are balanced. This is surprising given the excellent capabilities of GPT-5.2. The fact that LLMs make mistakes on such simple problems serves as an important lesson when applying LLMs to safety-critical domains. By applying ZEH to Qwen2.5 and conducting detailed analysis, we found that while ZEH correlates with accuracy, the detailed behaviors differ, and ZEH provides clues about the emergence of algorithmic capabilities. Finally, while computing ZEH incurs significant computational cost, we discuss how to mitigate this cost by achieving up to one order of magnitude speedup using tree structures and online softmax.

Complete orthogonal predictive coordinates do not by themselves bind a latent direction to a named intervention. We present a mathematical and synthetic audit motivated by vascular device-vessel suitcordance. Capacity-matched least-squares predictors were exactly equivalent under complete fixed output transforms, whereas an anchor-only observer recovered interpretations only within the span of known perturbation signatures. Six three-dimensional configurations across 64 seeds gave a maximum paired prediction discrepancy of 6.7e-15 but a median untransported edit error of 1.513. Coordinate transport removed that error. Noisy and weak anchors constrained calibration stability, and changing the representation basis required recalibration or verified transport. Across 256 additional fits in dimensions 3-24, prediction equivalence persisted within 4.0e-15. We then evaluated nine deliberate runnable fault classes across 64 seeds. All 576 faulty executions completed, but each violated at least one reconstruction, prediction, delivered-edit or scope contract; all 320 valid control records passed. Repeating a faulty implementation gave exact self-agreement despite error against the separately computed simulator expectation. For one omitted-direction defect, probe coverage followed its analytic law, and rank-aware abstention protected unsupported interpretations. Scalar-noise experiments exposed both missed weak faults and excessive rejection under narrow relative tolerances. These controls provide an executable separation of prediction, semantic support and scientific acceptance. They are synthetic numerical audits, not clinical validation, neural JEPA-Anything replication, agent learning or patient treatment-effect estimation.

Tool-using LLM agents can violate the very policies they are deployed to enforce while appearing to complete the task successfully. In policy-permissive environments, a tool may execute any well-formed call even when the corresponding state transition is forbidden by domain policy. The result is a silent wrong state (a booking cancelled, a passenger count changed, a claim acted on without verification) that neither the tool nor the agent's self-report exposes. We study this failure mode in the τ^2-bench airline domain. On a budget agent, 78% of observed failures are silent wrong-state failures with no tool error, and the aggregate failure rate is reproducible across disjoint seeds, not sampling noise. We then evaluate a lightweight intervention: deterministic, read-only pre-execution gates that inspect the proposed call and current state before allowing a write. A four-gate suite raises full-benchmark success from 29.6% to 42.0% on gpt-4o-mini (+12.4pp; paired task-level bootstrap P=0.0012), and the lift reproduces on a disjoint 15-seed set (+12.3pp; P=0.0008). The effect is concentrated where the gates fire: on the 26/50 firing tasks, success rises by +19.2pp, while movement on the 24 non-firing tasks does not exclude zero. Two negative controls (a self-enforcing retail domain and BFCL) bound the mechanism: gates help when tools are policy-permissive and add little where tools already self-enforce. As suggestive evidence, not a central claim, the same failure mode persists at the frontier: gpt-5.2 at default reasoning still attempts policy-violating writes, and the same suite improves success from 61.2% to 71.6% (+10.4pp; P=0.020; n=5, no replication). The contribution is a bounded evaluation and reliability result: deterministic gates do not guarantee task success, but they can deterministically prevent a known class of silent policy-violating writes at the action boundary.

Extensive system scales (i.e. thousands of GPU/TPUs) and prolonged training periods (i.e. months of pretraining) significantly escalate the probability of failures when training large language models (LLMs). Thus, efficient and reliable fault-tolerance methods are in urgent need. Checkpointing is the primary fault-tolerance method to periodically save parameter snapshots from GPU memory to disks via CPU memory. In this paper, we identify the frequency of existing checkpoint-based fault-tolerance being significantly limited by the storage I/O overheads, which results in hefty re-training costs on restarting from the nearest checkpoint. In response to this gap, we introduce an in-memory fault-tolerance framework for large-scale LLM pretraining. The framework boosts the efficiency and reliability of fault tolerance from three aspects: (1) Reduced Data Transfer and I/O: By asynchronously caching parameters, i.e., sharded model parameters, optimizer states, and RNG states, to CPU volatile memory, Our framework significantly reduces communication costs and bypasses checkpoint I/O. (2) Enhanced System Reliability: Our framework enhances parameter protection with a two-layer hierarchy: snapshot management processes (SMPs) safeguard against software failures, together with Erasure Coding (EC) protecting against node failures. This double-layered protection greatly improves the survival probability of the parameters compared to existing checkpointing methods. (3) Improved Snapshotting Frequency: Our framework achieves more frequent snapshotting compared with asynchronous checkpointing optimizations under the same saving time budget, which improves the fault tolerance efficiency. Empirical results demonstrate that Our framework minimizes the overhead of fault tolerance of LLM pretraining by effectively leveraging redundant CPU resources.

Software increasingly functions as part of the scientific instrument itself, making failures in scientific code capable of compromising not only program behavior but also the evidence underlying scientific conclusions. Yet existing evaluations of coding agents largely emphasize aggregate task success, providing limited insight into why agents fail when repairing scientific software. We introduce SWE-bench Science, a repository-level benchmark for scientific software engineering comprising 119 tasks from 98 GitHub repositories across 20 scientific domains. Each task is organized into one of three paradigms: Issue-driven, Expert-exploratory, and Engineering-integration. Even the best-performing agent, Claude Code with Opus-5 (max), achieves a pass@1 below 50\%, highlighting the substantial challenges posed by scientific software engineering. We identify four recurring failure mechanisms: deficits in scientific knowledge or abstraction, misguided exploration or surface-level repair, incomplete repair coverage or system integration, and failures to generalize scientific knowledge beyond observed cases in our analysis. We further conduct a paired ablation that removes explicit scientific guidance while preserving the repository and executable engineering context. The results show that scientific knowledge is not uniformly beneficial: well-grounded information can constrain repair and improve average performance and token efficiency, whereas poorly aligned guidance can induce anchoring and does not necessarily improve exact repair success. Together, SWE-bench Science provides a broad testbed for studying both the capabilities and failure mechanisms of coding agents in scientific software engineering.

As contemporary microservice systems become increasingly popular and complex-often comprising hundreds or even thousands of fine-grained, interdependent subsystems-they are experiencing more frequent failures. Ensuring system reliability thus demands accurate root cause localization. While many traditional graph-based and deep learning approaches have been explored for this task, they often rely heavily on pre-defined schemas that struggle to adapt to evolving operational contexts. Consequently, a number of LLM-based methods have recently been proposed. However, these methods still face two major limitations: shallow, symptom-centric reasoning that undermines accuracy, and a lack of cross-alert reuse that leads to redundant reasoning and high latency. In this paper, we conduct a comprehensive study of how Site Reliability Engineers (SREs) localize the root causes of failures, drawing insights from professionals across multiple organizations. Our investigation reveals that expert root cause analysis exhibits three key characteristics: recursiveness, multi-dimensional expansion, and cross-modal reasoning. Motivated by these findings, we introduce AMER-RCL, an agentic memory enhanced recursive reasoning framework for root cause localization in microservices. AMER-RCL employs the Recursive Reasoning RCL engine, a multi-agent framework that performs recursive reasoning on each alert to progressively refine candidate causes, while Agentic Memory incrementally accumulates and reuses reasoning from prior alerts within a time window to reduce redundant exploration and lower inference latency. Experimental results demonstrate that AMER-RCL consistently outperforms state-of-the-art methods in both localization accuracy and inference efficiency.

As Large Language Model (LLM) agents are increasingly tasked with high-stakes autonomous decision-making, the transparency of their reasoning processes has become a critical safety concern. While Chain-of-Thought (CoT) prompting allows agents to generate human-readable reasoning traces, it remains unclear whether these traces are faithful generative drivers of the model's output or merely post-hoc rationalizations. We introduce Project Ariadne, a novel XAI framework that utilizes Structural Causal Models (SCMs) and counterfactual logic to audit the causal integrity of agentic reasoning. Unlike existing interpretability methods that rely on surface-level textual similarity, Project Ariadne performs hard interventions (do-calculus) on intermediate reasoning nodes -- systematically inverting logic, negating premises, and reversing factual claims -- to measure the Causal Sensitivity (φ) of the terminal answer. Our empirical evaluation of state-of-the-art models reveals a persistent Faithfulness Gap. We define and detect a widespread failure mode termed Causal Decoupling, where agents exhibit a violation density (ρ) of up to 0.77 in factual and scientific domains. In these instances, agents arrive at identical conclusions despite contradictory internal logic, proving that their reasoning traces function as "Reasoning Theater" while decision-making is governed by latent parametric priors. Our findings suggest that current agentic architectures are inherently prone to unfaithful explanation, and we propose the Ariadne Score as a new benchmark for aligning stated logic with model action.

Construction accident narratives contain rich causal information, but the evidence is often implicit, long-span, and distributed. We introduce ConstructCIE, a manually annotated dataset for Causal Information Extraction from OSHA construction accident reports. The dataset uses a hierarchical schema for accident types, causal factors, sub-causal factors, and supporting evidence spans. We evaluate supervised sequence taggers and instruction-tuned LLMs in an end-to-end hierarchical extraction setting. Results show that most evaluated models achieve strong accident-type prediction and recover broad causal meaning but remain limited in precise span-level extraction. JHE generally achieves stronger exact and soft matching, while IHE sometimes achieves higher keyword F1. Error distributions vary by extraction strategy, but evidence-selection and span-boundary errors remain common. These findings show that reliable Causal Information Extraction for construction accidents requires stronger domain grounding and more accurate evidence extraction.

We present a dataset of several fault types in control surfaces of a fixed-wing Unmanned Aerial Vehicle (UAV) for use in Fault Detection and Isolation (FDI) and Anomaly Detection (AD) research. Currently, the dataset includes processed data for 47 autonomous flights with 23 sudden full engine failure scenarios and 24 scenarios for seven other types of sudden control surface (actuator) faults, with a total of 66 minutes of flight in normal conditions and 13 minutes of post-fault flight time. It additionally includes many hours of raw data of fully-autonomous, autopilot-assisted and manual flights with tens of fault scenarios. The ground truth of the time and type of faults is provided in each scenario to enable evaluation of the methods using the dataset. We have also provided the helper tools in several programming languages to load and work with the data and to help the evaluation of a detection method using the dataset. A set of metrics is proposed to help to compare different methods using the dataset. Most of the current fault detection methods are evaluated in simulation and as far as we know, this dataset is the only one providing the real flight data with faults in such capacity. We hope it will help advance the state-of-the-art in Anomaly Detection or FDI research for Autonomous Aerial Vehicles and mobile robots to enhance the safety of autonomous and remote flight operations further. The dataset and the provided tools can be accessed from https://doi.org/10.1184/R1/12707963.

In this paper, we introduce tensor involved peridynamics, a unified framework for simulating both isotropic and anisotropic materials. While traditional peridynamics models effectively simulate isotropic materials, they face challenges with anisotropic materials and are prone to instability caused by zero energy modes. Our novel model extend the linear bond based peridynamics framework by incorporating the elastic tensor into the micrmodulus function, thereby ensuring stability for anisotropic materials without the need for additional corrections. For isotropic materials. the model mantains compatibility with conventional bond based peridynamics, assuming Possion's rations of 1/4 in 3D and 1/3 in 2D.Numerical experiments confirm the model's stability and accuracy across various scenarios. Additionally, we introduce a damage model for isotropic materials. validating its performance in predicting crack propagation paths in a 2D plate. The results show superior alignment with experimental date compared to traditional model.

Large Language Models (LLM) benchmarks tell us when models fail, but not why they fail. A wrong answer on a reasoning dataset may stem from formatting issues, calculation errors, or dataset noise rather than weak reasoning. Without disentangling such causes, benchmarks remain incomplete and cannot reliably guide model improvement. We introduce ErrorMap, the first method to chart the sources of LLM failure. It extracts a model's unique "failure signature", clarifies what benchmarks measure, and broadens error identification to reduce blind spots. This helps developers debug models, aligns benchmark goals with outcomes, and supports informed model selection. ErrorMap works on any model or dataset with the same logic. Applying our method to 35 datasets and 83 models we generate ErrorAtlas, a taxonomy of model errors, revealing recurring failure patterns. ErrorAtlas highlights error types that are currently underexplored in LLM research, such as omissions of required details in the output and question misinterpretation. By shifting focus from where models succeed to why they fail, ErrorMap and ErrorAtlas enable advanced evaluation - one that exposes hidden weaknesses and directs progress. Unlike success, typically measured by task-level metrics, our approach introduces a deeper evaluation layer that can be applied globally across models and tasks, offering richer insights into model behavior and limitations. We make the taxonomy and code publicly available with plans to periodically update ErrorAtlas as new benchmarks and models emerge.

In mobile telecommunications, alarms act as early warning signals. They are triggered when a cell, the basic unit of radio coverage, shuts down or behaves abnormally. This signals a degradation in service quality, which directly affects the customer experience. To fix the issue, operators rely on preset thresholds to decide when an engineer should be sent out. In practice, these thresholds are set manually and remain fixed regardless of the time of day, traffic levels, or overall network conditions. This often leads to serious faults slipping through during busy hours, while minor issues can cause unnecessary callouts when the network is quiet. This paper presents a machine learning framework that automatically predicts four alarm thresholds, audit window duration, inactive time limit, total fluctuation count, and per hour fluctuation limit, from live network behavior. Since no ground truth labels exist for thresholds, we introduce a percentile guided label derivation strategy and evaluate four models on an anonymized dataset of 10,648 cells across three vendors and nine regions from a real 4G network, comprising a Gradient Boosted Trees baseline, a CNN-BiLSTM with attention, the proposed PCTN, and an iTransformer. PCTN performs the best overall with respect to three of the four targets, outperforming a state-of-the-art iTransformer while using 83 percent fewer parameters. Its mixed output heads and dynamic alpha mechanism produce thresholds that are both accurate and interpretable, allowing operators to inspect and adjust the learned policy without retraining. All comparisons are statistically significant at p < 0.001. The framework undergoes daily retraining using new data, which enables the thresholds to constantly adjust to changes in the network.

Pre-trained foundation models have demonstrated remarkable success in vision and language, yet their potential for general machine signal modeling-covering acoustic, vibration, and other industrial sensor data-remains under-explored. Existing approach using sub-band-based encoders has achieved competitive results but are limited by fixed input lengths, and the absence of explicit frequency positional encoding. In this work, we propose a novel foundation model that integrates an advanced band-split architecture with relative frequency positional embeddings, enabling precise spectral localization across arbitrary sampling configurations. The model supports inputs of arbitrary length without padding or segmentation, producing a concise embedding that retains both temporal and spectral fidelity. We evaluate our method on SIREN (https://github.com/yucongzh/SIREN), a newly introduced large-scale benchmark for machine signal encoding that unifies multiple datasets, including all DCASE task 2 challenges (2020-2025) and widely-used industrial signal corpora. Experimental results demonstrate consistent state-of-the-art performance in anomaly detection and fault identification, confirming the effectiveness and generalization capability of the proposed model. We open-sourced ECHO on https://github.com/yucongzh/ECHO.

For decades, classical point process models, such as the epidemic-type aftershock sequence (ETAS) model, have been widely used for forecasting the event times and locations of earthquakes. Recent advances have led to Neural Point Processes (NPPs), which promise greater flexibility and improvements over such classical models. However, the currently-used benchmark for NPPs does not represent an up-to-date challenge in the seismological community, since it contains data leakage and omits the largest earthquake sequence from the region. Additionally, initial earthquake forecasting benchmarks fail to compare NPPs with state-of-the-art forecasting models commonly used in seismology. To address these gaps, we introduce EarthquakeNPP: a benchmarking platform that curates and standardizes existing public resources: globally available earthquake catalogs, the ETAS model, and evaluation protocols from the seismology community. The datasets cover a range of small to large target regions within California, dating from 1971 to 2021, and include different methodologies for dataset generation. Benchmarking experiments, using both log-likelihood and generative evaluation metrics widely recognised in seismology, show that none of the five NPPs tested outperform ETAS. These findings suggest that current NPP implementations are not yet suitable for practical earthquake forecasting. Nonetheless, EarthquakeNPP provides a platform to foster future collaboration between the seismology and machine learning communities.

The machine learning community has recently had increased interest in the climate and disaster damage domain due to a marked increased occurrences of natural hazards (e.g., hurricanes, forest fires, floods, earthquakes). However, not enough attention has been devoted to mitigating probable destruction from impending natural hazards. We explore this crucial space by predicting building-level damages on a before-the-fact basis that would allow state actors and non-governmental organizations to be best equipped with resource distribution to minimize or preempt losses. We introduce PreDisM that employs an ensemble of ResNets and fully connected layers over decision trees to capture image-level and meta-level information to accurately estimate weakness of man-made structures to disaster-occurrences. Our model performs well and is responsive to tuning across types of disasters and highlights the space of preemptive hazard damage modelling.

In the Industrial Internet of Things (IIoT), condition monitoring sensor signals from complex systems often exhibit nonlinear and stochastic spatial-temporal dynamics under varying conditions. These complex dynamics make fault detection particularly challenging. While previous methods effectively model these dynamics, they often neglect the evolution of relationships between sensor signals. Undetected shifts in these relationships can lead to significant system failures. Furthermore, these methods frequently misidentify novel operating conditions as faults. Addressing these limitations, we propose DyEdgeGAT (Dynamic Edge via Graph Attention), a novel approach for early-stage fault detection in IIoT systems. DyEdgeGAT's primary innovation lies in a novel graph inference scheme for multivariate time series that tracks the evolution of relationships between time series, enabled by dynamic edge construction. Another key innovation of DyEdgeGAT is its ability to incorporate operating condition contexts into node dynamics modeling, enhancing its accuracy and robustness. We rigorously evaluated DyEdgeGAT using both a synthetic dataset, simulating varying levels of fault severity, and a real-world industrial-scale multiphase flow facility benchmark with diverse fault types under varying operating conditions and detection complexities. The results show that DyEdgeGAT significantly outperforms other baseline methods in fault detection, particularly in the early stages with low severity, and exhibits robust performance under novel operating conditions.

Coding agents can fix a failing example without preserving the domain rule that made it fail, so later generations can repeat the same plausible mistake. We present agentic synthesis against counterexample-supplemented sketches, a repository-native method for systems whose governing policy is discovered during implementation. A human starts with a partial, code-shaped sketch, and a coding agent generates the first implementation. When a concrete failure exposes missing or mistaken policy, an operator explicitly approves the corrected behavior and rule. The agent then revises the sketch and repairs or regenerates code and prompt surfaces for that one counterexample. The full archive preserves provenance; a selected regression set gates each revision before the next candidate is revealed; and periodic clean regeneration tests whether the evolved sketch, rather than prompt history or accumulated examples, carries the learned policy. We demonstrate the method with CatSynth, a synthetic browser application and captured coding-agent experiment. In one open-world run with GPT-5.4-mini, 8 of 14 frozen candidate cases became counterexamples. The rebuild controls inherited that promotion schedule, and all three paths passed the 8 accepted cases. Rebuilding from the evolved sketch passed 19 of 21 withheld cases, compared with 15 of 21 when rebuilding from the initial sketch and replaying all accepted examples. Retaining code across counterexamples required 9 Developer calls and 719 lines of cumulative artifact churn, versus 15 calls and 2,394 lines for replay-all, and passed 18 of 21 withheld cases. These results provide inspectable evidence that the evolved sketch carried reviewed policy and that retaining code reduced rework in this run; with one model and one reveal order, they do not establish general superiority or correctness beyond the encoded checks.

Time-Series Foundation Models (TSFMs) are rapidly transitioning from research prototypes to core components of critical decision-making systems, driven by their impressive zero-shot forecasting capabilities. However, as their deployment surges, a critical blind spot remains: their fragility under adversarial attacks. This lack of scrutiny poses severe risks, particularly as TSFMs enter high-stakes environments vulnerable to manipulation. We present a systematic, diagnostic study arguing that for TSFMs, robustness is not merely a secondary metric but a prerequisite for trustworthy deployment comparable to accuracy. Our evaluation framework, explicitly tailored to the unique constraints of time series, incorporates normalized, sparsity-aware perturbation budgets and unified scale-invariant metrics across white-box and black-box settings. Across six representative TSFMs, we demonstrate that current architectures are alarmingly brittle: even small perturbations can reliably steer forecasts toward specific failure modes, such as trend flips and malicious drifts. We uncover TSFM-specific vulnerability patterns, including horizon-proximal brittleness, increased susceptibility with longer context windows, and weak cross-model transfer that points to model-specific failure modes rather than generic distortions. Finally, we show that simple adversarial fine-tuning offers a cost-effective path to substantial robustness gains, even with out-of-domain data. This work bridges the gap between TSFM capabilities and safety constraints, offering essential guidance for hardening the next generation of forecasting systems.

Evaluating retrieval-augmented generation (RAG) pipelines requires corpora where ground truth is knowable, temporally structured, and cross-artifact properties that real-world datasets rarely provide cleanly. Existing resources such as the Enron corpus carry legal ambiguity, demographic skew, and no structured ground truth. Purely LLM-generated synthetic data solves the legal problem but introduces a subtler one: the generating model cannot be prevented from hallucinating facts that contradict themselves across documents.We present OrgForge, an open-source multi-agent simulation framework that enforces a strict physics-cognition boundary: a deterministic Python engine maintains a SimEvent ground truth bus; large language models generate only surface prose, constrained by validated proposals. An actor-local clock enforces causal timestamp correctness across all artifact types, eliminating the class of timeline inconsistencies that arise when timestamps are sampled independently per document. We formalize three graph-dynamic subsystems stress propagation via betweenness centrality, temporal edge-weight decay, and Dijkstra escalation routing that govern organizational behavior independently of any LLM. Running a configurable N-day simulation, OrgForge produces interleaved Slack threads, JIRA tickets, Confluence pages, Git pull requests, and emails, all traceable to a shared, immutable event log. We additionally describe a causal chain tracking subsystem that accumulates cross-artifact evidence graphs per incident, a hybrid reciprocal-rank-fusion recurrence detector for identifying repeated failure classes, and an inbound/outbound email engine that routes vendor alerts, customer complaints, and HR correspondence through gated causal chains with probabilistic drop simulation. OrgForge is available under the MIT license.

Existing agent benchmarks mainly evaluate final task success or tool-call correctness, providing limited insight into whether agents can reliably diagnose and recover from intermediate execution failures. This limitation becomes particularly critical in multi-turn parallel tool-use scenarios, where errors may propagate across dependent branches and trigger cascading failures. We introduce ParaRecover, a process-level benchmark for evaluating error localization and recovery in multi-turn parallel tool-use agents. Built upon a fine-grained taxonomy of 14 error types covering planning dependencies, tool selection, and argument matching, the benchmark comprises 10,626 instances spanning two difficulty levels. To enable finegrained, process-oriented evaluation, we further propose the SDE rubric, which measures structural integrity, diagnostic reasoning, and evolutionary strategy during agent execution.Experiments across more than ten mainstream LLMs reveal that even state-of-the-art models still struggle with multi-turn error propagation,implicit tool-use failures, and precise replanning. Moreover, we demonstrate that the SDE rubric provides effective supervision signals for improving agents' reflective recovery capabilities. Our data and code are available at https://github.com/gbw206/ParaRecover.

Agentic LLM coding tools compress long session histories into compaction summaries that subsequent sessions inherit as ground truth. This paper documents a failure mode in Claude Code where partial standard output from timed-out commands (exit code 143) is recorded in compaction summaries as confirmed results, propagating false positives across sessions and model versions without re-verification. The underlying mechanism is a conflation of observation and persistence, where information that appeared in the terminal is treated as equivalent to information written to durable storage. This finding extends the analysis of LLM self-evaluation failures reported in prior work on non-determinism in LLM-as-judge grading by showing that agentic tools exhibit analogous reliability deficits when reporting on their own operational outcomes. The failure has direct implications for any workflow that relies on agentic session continuity for data processing, scientific computation, or multi-step automation.

Large language models (LLMs) possess impressive linguistic capabilities but often fail to faithfully retain factual knowledge, leading to hallucinations and unreliable outputs. Understanding LLMs' knowledge deficiencies by exhaustively evaluating against full-scale knowledge bases is computationally prohibitive, especially for closed-weight models. We propose stochastic error ascent (SEA), a scalable and efficient framework for discovering knowledge deficiencies (errors) in closed-weight LLMs under a strict query budget. Rather than naively probing all knowledge candidates, SEA formulates error discovery as a stochastic optimization process: it iteratively retrieves new high-error candidates by leveraging the semantic similarity to previously observed failures. To further enhance search efficiency and coverage, SEA employs hierarchical retrieval across document and paragraph levels, and constructs a relation directed acyclic graph to model error propagation and identify systematic failure modes. Empirically, SEA uncovers 40.7x more knowledge errors than Automated Capability Discovery and 26.7% more than AutoBencher, while reducing the cost-per-error by 599x and 9x, respectively. Human evaluation confirms the high quality of generated questions, while ablation and convergence analyses validate the contribution of each component in SEA. Further analysis on the discovered errors reveals correlated failure patterns across LLM families and recurring deficits, highlighting the need for better data coverage and targeted fine-tuning in future LLM development.

Safety benchmark scores provide incomplete evidence of deployment readiness: aligned language models often adhere to rigid rules even when a situational update flips which action is safe. We term this failure brittle safety. To diagnose it, we introduce context-flip evaluation, testing 12 models across a safety benchmark (PacifAIst) and two commonsense controls using paired variants where the nominally safe action produces harm. Three findings emerge. First, brittle safety is safety-specific: all 12 models exhibit a safety-commonsense gap (mean +17.4 pp). Baseline accuracy fails to predict brittleness: among models above 90% baseline accuracy, brittleness rates range from 13.7% to 90.0%. Second, failures stem from policy override rather than miscomprehension: despite acknowledging the context change in every case, models persist via three distinct mechanisms that vary by update type and model family. Third, on a hand-audited probe of catastrophic consequence-flip scenarios, standard action-level guardrails catch none, while a state-aware validator catches all without false alarms on correct interventions. This indicates that action-level content moderation is systematically blind to consequence-flips, motivating state-aware architectural alternatives. We release our protocol, perturbed benchmarks, and deployment probe.

As modern microservice systems grow increasingly complex due to dynamic interactions and evolving runtime environments, they experience failures with rising frequency. Ensuring system reliability therefore critically depends on accurate root cause localization (RCL). While numerous traditional machine learning and deep learning approaches have been explored for this task, they often suffer from limited interpretability and poor transferability across deployments. More recently, large language model (LLM)-based methods have been proposed to address these issues. However, existing LLM-based approaches still face two fundamental limitations: context explosion, which dilutes critical evidence and degrades localization accuracy, and serial reasoning structures, which hinder deep causal exploration and impair inference efficiency. In this paper, we conduct a comprehensive study of both how human SREs perform root cause localization in practice and why existing LLM-based methods fall short. Motivated by these findings, we introduce RCLAgent, an in-depth root cause localization framework for microservice systems that realizes multi-agent recursion-of-thought with parallel reasoning. RCLAgent decomposes the diagnostic process along the trace graph by assigning each span to a Dedicated Agent and organizing agents recursively and in parallel according to the graph topology, with the final diagnosis obtained by synthesizing the Root-Level Diagnosis Report and the Global Evidence Graph. Extensive experiments on multiple public benchmarks demonstrate that RCLAgent consistently outperforms state-of-the-art methods in both localization accuracy and inference efficiency.

Agentic systems consisting of multiple LLM-driven agents coordinating through tools and structured interactions, are increasingly deployed for complex reasoning and problem-solving tasks. At the same time, emerging low-code and template-based agent development platforms (e.g., Dify) enable users to rapidly build and orchestrate agentic systems, which we refer to as platform-orchestrated agentic systems. However, these systems are also fragile and it remains unclear how to systematically identify their potential failure root cause. This paper presents a study of root cause identification of these platform-orchestrated agentic systems. To support this initiative, we construct a dataset AgentFail containing 307 failure logs from ten agentic systems, each with fine-grained annotations linking failures to their root causes. We additionally utilize counterfactual reasoning-based repair strategy to ensure the reliability of the annotation. Building on the dataset, we develop a taxonomy that characterizes failure root causes and analyze their distribution across different platforms and task domains. Furthermore, we introduce a benchmark that leverages LLMs for automatically identifying root causes, in which we also utilize the proposed taxonomy as guidance for LLMs. Results show that the taxonomy can largely improve the performance, thereby confirming its utility. Nevertheless, the accuracy of root cause identification reaches at most 33.6%, which indicates that this task still remains challenging. In light of these results, we also provide actionable guidelines for building such agentic systems. In summary, this paper provides a reliable dataset of failure root cause for platform-orchestrated agentic systems, corresponding taxonomy and benchmark, which serves as a foundation for advancing the development of more reliable agentic systems.

Network systems form the foundation of modern society, playing a critical role in various applications. However, these systems are at significant risk of being adversely affected by unforeseen circumstances, such as disasters. Considering this, there is a pressing need for research to enhance the robustness of network systems. Recently, in reinforcement learning, the relationship between acquiring robustness and regularizing entropy has been identified. Additionally, imitation learning is used within this framework to reflect experts' behavior. However, there are no comprehensive studies on the use of a similar imitation framework for optimal transport on networks. Therefore, in this study, imitation-regularized optimal transport (I-OT) on networks was investigated. It encodes prior knowledge on the network by imitating a given prior distribution. The I-OT solution demonstrated robustness in terms of the cost defined on the network. Moreover, we applied the I-OT to a logistics planning problem using real data. We also examined the imitation and apriori risk information scenarios to demonstrate the usefulness and implications of the proposed method.

As contemporary microservice systems become increasingly popular and complex-often comprising hundreds or even thousands of fine-grained, interdependent subsystems-they are facing more frequent failures. Ensuring system reliability thus demands accurate root cause localization. While traces and metrics have proven to be effective data sources for this task, existing methods either heavily rely on pre-defined schemas, which struggle to adapt to evolving operational contexts, or lack interpretability in their reasoning process, thereby leaving Site Reliability Engineers (SREs) confused. In this paper, we conduct a comprehensive study on how SREs localize the root cause of failures, drawing insights from multiple professional SREs across different organizations. Our investigation reveals that human root cause analysis exhibits three key characteristics: recursiveness, multi-dimensional expansion, and cross-modal reasoning. Motivated by these findings, we introduce RCLAgent, an adaptive root cause localization method for microservice systems that leverages a multi-agent recursion-of-thought framework. RCLAgent employs a novel recursion-of-thought strategy to guide the LLM's reasoning process, effectively integrating data from multiple agents and tool-assisted analysis to accurately pinpoint the root cause. Experimental evaluations on various public datasets demonstrate that RCLAgent achieves superior performance by localizing the root cause using only a single request-outperforming state-of-the-art methods that depend on aggregating multiple requests. These results underscore the effectiveness of RCLAgent in enhancing the efficiency and precision of root cause localization in complex microservice environments.

Large Reasoning Models (LRMs) have exhibited extraordinary prowess in tasks like mathematics and coding, leveraging their advanced reasoning capabilities. Nevertheless, as these capabilities progress, significant concerns regarding their vulnerabilities and safety have arisen, which can pose challenges to their deployment and application in real-world settings. This paper presents a comprehensive survey of LRMs, meticulously exploring and summarizing the newly emerged safety risks, attacks, and defense strategies. By organizing these elements into a detailed taxonomy, this work aims to offer a clear and structured understanding of the current safety landscape of LRMs, facilitating future research and development to enhance the security and reliability of these powerful models.

Multi-agent systems powered by Large Language Models excel at complex tasks through coordinated collaboration, yet they face high failure rates in multi-turn deep search scenarios. Existing temporal attribution methods struggle to accurately diagnose root causes, particularly when errors propagate across multiple agents. Attempts to automate failure attribution by analyzing action sequences remain ineffective due to their inability to account for information dependencies that span agents. This paper identifies two core challenges: (i) distinguishing symptoms from root causes in multi-agent error propagation, and (ii) tracing information dependencies beyond temporal order. To address these issues, we introduce GraphTracer, a framework that redefines failure attribution through information flow analysis. GraphTracer constructs Information Dependency Graphs (IDGs) to explicitly capture how agents reference and build on prior outputs. It localizes root causes by tracing through these dependency structures instead of relying on temporal sequences. GraphTracer also uses graph-aware synthetic data generation to target critical nodes, creating realistic failure scenarios. Evaluations on the Who\&When benchmark and integration into production systems demonstrate that GraphTracer-8B achieves up to 18.18\% higher attribution accuracy compared to state-of-the-art models and enables 4.8\% to 14.2\% performance improvements in deployed multi-agent frameworks, establishing a robust solution for multi-agent system debugging.

Diffusion models have demonstrated robust data generation capabilities in various research fields. In this paper, a Time Series Diffusion Method (TSDM) is proposed for vibration signal generation, leveraging the foundational principles of diffusion models. The TSDM uses an improved U-net architecture with attention block to effectively segment and extract features from one-dimensional time series data. It operates based on forward diffusion and reverse denoising processes for time-series generation. Experimental validation is conducted using single-frequency, multi-frequency datasets, and bearing fault datasets. The results show that TSDM can accurately generate the single-frequency and multi-frequency features in the time series and retain the basic frequency features for the diffusion generation results of the bearing fault series. Finally, TSDM is applied to the small sample fault diagnosis of three public bearing fault datasets, and the results show that the accuracy of small sample fault diagnosis of the three datasets is improved by 32.380%, 18.355% and 9.298% at most, respectively

Deep Neural Networks (DNNs) are widely being adopted for safety-critical applications, e.g., healthcare and autonomous driving. Inherently, they are considered to be highly error-tolerant. However, recent studies have shown that hardware faults that impact the parameters of a DNN (e.g., weights) can have drastic impacts on its classification accuracy. In this paper, we perform a comprehensive error resilience analysis of DNNs subjected to hardware faults (e.g., permanent faults) in the weight memory. The outcome of this analysis is leveraged to propose a novel error mitigation technique which squashes the high-intensity faulty activation values to alleviate their impact. We achieve this by replacing the unbounded activation functions with their clipped versions. We also present a method to systematically define the clipping values of the activation functions that result in increased resilience of the networks against faults. We evaluate our technique on the AlexNet and the VGG-16 DNNs trained for the CIFAR-10 dataset. The experimental results show that our mitigation technique significantly improves the resilience of the DNNs to faults. For example, the proposed technique offers on average 68.92% improvement in the classification accuracy of resilience-optimized VGG-16 model at 1e-5 fault rate, when compared to the base network without any fault mitigation.

Recent advances in large language models (LLMs) have enabled agents to autonomously execute complex, long-horizon tasks, yet planning remains a primary bottleneck for reliable task execution. Existing methods typically fall into two paradigms: step-wise planning, which is reactive but often short-sighted; and one-shot planning, which generates a complete plan upfront yet is brittle to execution errors. Crucially, both paradigms suffer from entangled contexts, where the agent must reason over a monolithic history spanning multiple sub-tasks. This entanglement increases cognitive load and lets local errors propagate across otherwise independent decisions, making recovery computationally expensive. To address this, we propose Task-Decoupled Planning (TDP), a training-free framework that replaces entangled reasoning with task decoupling. TDP decomposes tasks into a directed acyclic graph (DAG) of sub-goals via a Supervisor. Using a Planner and Executor with scoped contexts, TDP confines reasoning and replanning to the active sub-task. This isolation prevents error propagation and corrects deviations locally without disrupting the workflow. Results on TravelPlanner, ScienceWorld, and HotpotQA show that TDP outperforms strong baselines while reducing token consumption by up to 82%, demonstrating that sub-task decoupling improves both robustness and efficiency for long-horizon agents.

Understanding causal relationships between machines is crucial for fault diagnosis and optimization in manufacturing processes. Real-world datasets frequently exhibit up to 90% missing data and high dimensionality from hundreds of sensors. These datasets also include domain-specific expert knowledge and chronological order information, reflecting the recording order across different machines, which is pivotal for discerning causal relationships within the manufacturing data. However, previous methods for handling missing data in scenarios akin to real-world conditions have not been able to effectively utilize expert knowledge. Conversely, prior methods that can incorporate expert knowledge struggle with datasets that exhibit missing values. Therefore, we propose COKE to construct causal graphs in manufacturing datasets by leveraging expert knowledge and chronological order among sensors without imputing missing data. Utilizing the characteristics of the recipe, we maximize the use of samples with missing values, derive embeddings from intersections with an initial graph that incorporates expert knowledge and chronological order, and create a sensor ordering graph. The graph-generating process has been optimized by an actor-critic architecture to obtain a final graph that has a maximum reward. Experimental evaluations in diverse settings of sensor quantities and missing proportions demonstrate that our approach compared with the benchmark methods shows an average improvement of 39.9% in the F1-score. Moreover, the F1-score improvement can reach 62.6% when considering the configuration similar to real-world datasets, and 85.0% in real-world semiconductor datasets. The source code is available at https://github.com/OuTingYun/COKE.