new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 20

Why Deterministic PRM Guidance Underperforms in Discrete Diffusion Reasoning

Discrete diffusion language models (dLLMs) expose a denoised solution at every step, which makes process reward model (PRM) guidance look like a way to spend compute at test time. We show that once denoising, PRM scoring, and outcome reward model (ORM) scoring are charged in the same budget of forward passes, its deterministic form loses to a much simpler baseline. Our PRMs score intermediate denoising states and are trained on the correctness of the final answer. On Dream-v0-Instruct-7B with 8 candidates per GSM8K problem, keeping the candidate with the highest PRM score at every scoring step reaches 65.18%, while independent sampling plus an ORM reranker trained for the task reaches 75.13%. The gap grows to 12.69 percentage points (pp) with 32 candidates, and is 9.85 pp on MATH and 12.16 pp on MBPP. We trace it to two separable failures. First, guidance prunes on a weak signal: on GSM8K, PRM ROC-AUC falls from 0.77 to 0.54 as the mask ratio rises, a decay that persists when states are relabeled with fresh rollouts, and pruning lowers the best accuracy reachable from the candidate pool from 81.05% for independent samples to 67.30%. Second, on GSM8K and MATH, the PRM is a poor final judge: a sequential Monte Carlo sampler at the same budget restores that ceiling to 77.89%, yet selecting with the PRM gives 65.48%, on par with deterministic guidance, while a PRM retrained on final states matches the ORM on identical candidates. MBPP separates the two: there the PRM reaches 65.47% when reranking finished programs, on par with the ORM, but 50.88% when it guides denoising. The results point to two targets for dLLM guidance: keep correct partial solutions alive through early denoising, and leave the final choice to a verifier trained on final states. We release the corpus of denoising states with outcome labels and evaluation toolkit for reproducible comparisons at matched compute.

LiteVSR: Lightweight Adaptation of Frozen Diffusion Transformers for Video Super-Resolution

Adapting large-scale pre-trained video generators for Video Super-Resolution (VSR) in novel domains remains computationally prohibitive. Methods that reformulate generation as direct Low-Quality to High-Quality mappings deviate from the original generative formulation, demanding extensive fine-tuning. ControlNet-style adapters lose their efficiency under modern Diffusion Transformers since the absence of encoder-decoder hierarchy forces duplication of the entire backbone. We observe that flow matching offers a principled alternative for cross-domain VSR adaptation. By predicting a constant velocity field across all timesteps, the adaptation task reduces to learning a fixed injection pattern rather than time-varying transformations. Building on this insight, we propose LiteVSR, a minimalist framework that performs VSR using a completely frozen Diffusion Transformer with a lightweight State-Aware Adapter. The adapter employs a dual-stream architecture that extracts static structural cues from the LQ input and dynamic cues from intermediate denoising states, aligning them through time-dependent cross-attention to enable adaptive transition from structural alignment to texture refinement as denoising proceeds. LiteVSR achieves competitive restoration quality with only 11.25% trainable parameters and 12 GPU-hours of training on a single A100, while maintaining fast sampling (down to a single step) compatibility.

  • 6 authors
·
Jun 7

Multi-Turn Reflective Masking Elicits Reasoning in Mask Diffusion Models

While reasoning on autoregressive (AR) models is often performed by chain-of-thought reasoning and reflection, their refinement of previous outputs still relies on fully sequential generation, even when only local edits are needed. In contrast, the masking mechanism in Mask Diffusion Models (MDMs) naturally supports explicit local edits on previous outputs, allowing selective refinement without discarding previous answers and generating another from scratch. While this property more closely aligns with how humans correct mistakes by iterative local refinement, existing MDMs do not support multi-turn masking and denoising. We propose Reflective Masking (RM), which elicits such an intrinsic reasoning capability in MDMs via lightweight post-training. RM provides a native test-time scaling, where an MDM iteratively revisits and revises its prior outputs based on evolving context. To exploit insights from previous turns like AR reasoning, we further introduce History Reference, a parameter-free mechanism that leverages intermediate denoising states during revision. Our approach requires no architectural changes and is easily applicable to existing MDMs. Across diverse tasks and modalities, including text generation, Sudoku, and image editing, Reflective Masking consistently outperforms standard masking-based baselines and demonstrates strong generality, positioning RM as a fundamental primitive for reasoning on MDMs.

umd-zhou-lab Tianyi Lab
·
Jun 14 4

InterLCM: Low-Quality Images as Intermediate States of Latent Consistency Models for Effective Blind Face Restoration

Diffusion priors have been used for blind face restoration (BFR) by fine-tuning diffusion models (DMs) on restoration datasets to recover low-quality images. However, the naive application of DMs presents several key limitations. (i) The diffusion prior has inferior semantic consistency (e.g., ID, structure and color.), increasing the difficulty of optimizing the BFR model; (ii) reliance on hundreds of denoising iterations, preventing the effective cooperation with perceptual losses, which is crucial for faithful restoration. Observing that the latent consistency model (LCM) learns consistency noise-to-data mappings on the ODE-trajectory and therefore shows more semantic consistency in the subject identity, structural information and color preservation, we propose InterLCM to leverage the LCM for its superior semantic consistency and efficiency to counter the above issues. Treating low-quality images as the intermediate state of LCM, InterLCM achieves a balance between fidelity and quality by starting from earlier LCM steps. LCM also allows the integration of perceptual loss during training, leading to improved restoration quality, particularly in real-world scenarios. To mitigate structural and semantic uncertainties, InterLCM incorporates a Visual Module to extract visual features and a Spatial Encoder to capture spatial details, enhancing the fidelity of restored images. Extensive experiments demonstrate that InterLCM outperforms existing approaches in both synthetic and real-world datasets while also achieving faster inference speed.

  • 9 authors
·
Feb 4, 2025 1

RhymeFlow: Training-Free Acceleration for Video Generation with Asynchronous Denoising Flow Scheduling

Video generation models based on Diffusion Transformers (DiTs) have achieved remarkable performance in video synthesis, yet they suffer from high inference latency and computational costs due to the quadratic complexity of 3D attention. Existing acceleration methods primarily reduce computational complexity within each individual denoising steps through techniques such as sparse attention and KV-caching. However, they rigidly adhere to the inherent constraint of the standard diffusion pipeline: every frame in the target video sequence must be subjected to a complete, dense denoising process across all diffusion timesteps. We observe that due to the corresponding contents and motions among adjacent frames, when keyframes with critical semantic transitions are anchored, the intermediate states of others often follow more predictable trajectories, which indicates that such uniform, dense denoising process is inherently redundant for natural video data. To this end, we introduce RhymeFlow, a training-free framework that decouples the denoising trajectories of different frames. Specifically, we first identify a sparse set of pivotal key frames that dominate the latent semantic evolution. Then, only these keyframes undergo dense, step-by-step denoising to ensure structural integrity, while non-keyframes progressively skip denoising steps to minimize computational cost. Since skipped intermediate states of non-keyframes break the temporal coherence in keyframe denoising steps, leading to visual degradation, we further introduce a latent trajectory projection module, which enables keyframes to interact with a complete and temporally consistent sequence representation. Extensive experiments on current DiT-based video generation models demonstrate our method outperforms existing baselines with higher inference speed and better visual quality.

Tsinghua-IVG Tsinghua-IVG
·
Jun 3 2

Mixture of Frames Policy: Multi-Frame Action Denoising for Bimanual Mobile Manipulation

Robotic manipulation is inherently multi-frame: local actions may be simple in an end-effector frame, while transport, upright-object handling, and whole-body coordination are better represented in a base-aligned frame. However, modern diffusion-based visuomotor policies typically commit to a single predefined action frame, forcing one denoiser to model action distributions that are often unnecessarily complex in that frame. We propose Mixture of Frames Policy (MoF), a diffusion policy that performs synchronized action denoising across multiple coordinate frames. MoF maintains a single canonical diffusion state, re-expresses it in several task-relevant frames, applies frame-specialized denoisers, and fuses their noise predictions back in the canonical frame. To make this possible for intermediate noisy diffusion states, we introduce a column-based 6D rotation representation within an SE(3) action parameterization that supports exact, differentiable frame transformations without requiring noisy rotations to lie on the SO(3) manifold. Across nine simulated bimanual manipulation tasks, we show that the best action frame is task-dependent and that MoF improves over oracle frame selection and standard Mixture-of-Experts (MoE) baselines. We further evaluate MoF on two real-world bimanual mobile manipulation tasks, demonstrating that it outperforms all constituent single-frame baselines. Project homepage: https://mofpo.github.io

  • 6 authors
·
Jul 12

Latent Denoising Improves Visual Alignment in Large Multimodal Models

Large Multimodal Models (LMMs) such as LLaVA are typically trained with an autoregressive language modeling objective, providing only indirect supervision to visual tokens. This often yields weak internal visual representations and brittle behavior under distribution shift. Inspired by recent progress on latent denoising for learning high-quality visual tokenizers, we show that the same principle provides an effective form of visual supervision for improving internal visual feature alignment and multimodal understanding in LMMs. We propose a latent denoising framework that corrupts projected visual tokens using a saliency-aware mixture of masking and Gaussian noising. The LMM is trained to denoise these corrupted tokens by recovering clean teacher patch features from hidden states at a selected intermediate LLM layer using a decoder. To prevent representation collapse, our framework also preserves the teacher's intra-image similarity structure and applies intra-image contrastive patch distillation. During inference, corruption and auxiliary heads are disabled, introducing no additional inference-time overhead. Across a broad suite of standard multimodal benchmarks, our method consistently improves visual understanding and reasoning over strong baselines, and yields clear gains on compositional robustness benchmarks (e.g., NaturalBench). Moreover, under ImageNet-C-style non-adversarial common corruptions applied to benchmark images, our method maintains higher accuracy and exhibits reduced degradation at both moderate and severe corruption levels. Our code is available at https://github.com/dhruvashp/latent-denoising-for-lmms.

  • 4 authors
·
Apr 22

VLA-Rolling: Fewer Denoising Steps, Better Control via Adaptive Action Reuse

Flow-matching vision-language-action (VLA) models generate an action chunk by iteratively denoising Gaussian noise, but typically execute only a short prefix before replanning with updated observations. Under this receding-horizon paradigm, the unexecuted remainder---the action tail---is discarded, and the next chunk is regenerated from fresh noise. We show that this discarded tail retains transferable denoising progress: action-tail initialization can match or outperform a native 10-step Gaussian baseline using fewer denoising steps. However, the optimal denoising budget varies substantially across samples, indicating that tail reuse should be adapted to the updated environment. Based on this observation, we introduce VLA-Rolling, a lightweight inference framework that reuses action tails through three stages: action-tail inheritance, per-action confidence estimation, and confidence-guided refinement through renoising and denoising budget allocation, while the underlying VLA remains frozen. Across π_{0.5}, SmolVLA, X-VLA, and MolmoAct2 on LIBERO, MetaWorld, LIBERO-Plus, and RoboTwin 2.0, VLA-Rolling reduces action-chunk inference cost in all 16 model--benchmark pairs, achieving up to a 1.48times speedup, while improving success rate in 14 pairs by up to 15.08 percentage points. These results show that action tails are not merely discarded predictions, but reusable intermediate states that enable more efficient and accurate VLA inference. These results demonstrate that the action tail can support the generation of better actions with fewer denoising steps. Our project is available at https://chenbao123ww.github.io/VLA-Rolling/.

OmniAI-ZJU ZJU-OmniAI
·
Oct 17 2

World Models Need a Physical Registry: Learning Internal Predictive States for Physically Plausible World Models

Video world models must generate physically plausible futures, not just realistic frames. Existing approaches typically use semantic, physical, or predictive information to guide the visual generation stream, leaving a fundamental question: where inside the generator should predictions of scene evolution live? Standard video tokens jointly encode appearance and dynamics, but provide no distinct state for learning and reading predictive dynamics. We answer this question with the Physical Registry: temporally grounded registry slots inside a video DiT that are initialized from an observation-conditioned forecast, co-evolve with video tokens, and receive future-representation supervision, making predictive dynamics an explicit, readable state of the generator. In a controlled comparison of predictive-state interfaces on Physics-IQ Verified, Physical Registry improves vanilla fine-tuning by 9.9/8.7 points on I2V/V2V, the largest gain among the interfaces we compare. Across all Cosmos and WAN backbones, Physical Registry improves Physics-IQ Verified scores. With only 0.45% additional parameters, it enables Cosmos 3 Nano 16B to surpass the published I2V score of Cosmos 3 Super 64B (43.56 vs. 42.7). On WorldModelBench, it also improves physical adherence and the total score for all four evaluated backbones. Because the registry becomes candidate-specific while remaining readable, the Physical Registry Selector (PRS) ranks emerging futures by how far their intermediate registry readouts depart from the shared forecast before full denoising is complete. Across four backbones, this selection improves I2V scores by 5.6-15.9% without completed-video external scoring. Together, these results support a broader principle: dynamics prediction should live as an explicit model state that co-evolves with the video representation. Project page: https://grainsack.github.io/physical-registry/

  • 4 authors
·
Oct 11

InstantFusion: A Shared Latent Interface for Heterogeneous Image Generators

Diffusion/flow models have emerged as the de facto paradigms for image generation, giving rise to a diverse family of modern generators with increasingly heterogeneous architectures and representations. Despite their remarkable generation capabilities, the cross-model alignment of latent representations and the consistency of their underlying denoising dynamics remain underexplored. In this work, we uncover an intriguing cross-model compatibility: independently trained generators exhibit similar latent spatial organization, while directly handing off intermediate states between unaligned models can still preserve coarse visual content. Motivated by these observations, we propose InstantFusion, a lightweight shared latent interface that connects the denoising trajectories of heterogeneous image generators. Specifically, to enable flexible cross-model state translation, model-specific Latent AutoEncoders (LAEs) are introduced to project intermediate states from different generators into a shared latent space and decode them into the latent space of a target generator. This shared space is constrained by two complementary objectives: aligning intermediate states derived from the same image at matched noise levels and synchronizing their corresponding local denoising velocities. Once trained, InstantFusion allows denoising to seamlessly transition across frozen generators without requiring a dedicated mapping for every model pair. The versatility of InstantFusion is demonstrated across acceleration, multi-preference composition, cross-architecture on-policy distillation, and cross-model composition, achieving competitive performance across these diverse settings.

AdjointDPM: Adjoint Sensitivity Method for Gradient Backpropagation of Diffusion Probabilistic Models

Existing customization methods require access to multiple reference examples to align pre-trained diffusion probabilistic models (DPMs) with user-provided concepts. This paper aims to address the challenge of DPM customization when the only available supervision is a differentiable metric defined on the generated contents. Since the sampling procedure of DPMs involves recursive calls to the denoising UNet, na\"ive gradient backpropagation requires storing the intermediate states of all iterations, resulting in extremely high memory consumption. To overcome this issue, we propose a novel method AdjointDPM, which first generates new samples from diffusion models by solving the corresponding probability-flow ODEs. It then uses the adjoint sensitivity method to backpropagate the gradients of the loss to the models' parameters (including conditioning signals, network weights, and initial noises) by solving another augmented ODE. To reduce numerical errors in both the forward generation and gradient backpropagation processes, we further reparameterize the probability-flow ODE and augmented ODE as simple non-stiff ODEs using exponential integration. Finally, we demonstrate the effectiveness of AdjointDPM on three interesting tasks: converting visual effects into identification text embeddings, finetuning DPMs for specific types of stylization, and optimizing initial noise to generate adversarial samples for security auditing.

  • 5 authors
·
Jul 20, 2023

MetaState: Persistent Working Memory Enhances Reasoning in Discrete Diffusion Language Models

Discrete diffusion language models (dLLMs) generate text by iteratively denoising a masked sequence. However, standard dLLMs condition each denoising step solely on the current hard-masked sequence, while intermediate continuous representations are discarded after sampling and remasking. We term this bottleneck the Information Island issue: continuous information remains isolated within individual denoising steps and fails to propagate across the trajectory. This bottleneck is especially harmful for reasoning, which requires intermediate reasoning state to be preserved and updated across many denoising steps. To address this limitation, we introduce MetaState, a lightweight recurrent augmentation that equips a frozen dLLM backbone with persistent, fixed-size working memory. MetaState comprises three modules with a shared time conditioner: a cross-attention Mixer that reads backbone activations into memory slots, a GRU-style Updater that integrates information across steps, and a cross-attention Injector that writes the updated memory back into the backbone. We train these modules with a dedicated K-step unrolling pipeline to learn multi-step dynamics. MetaState adds only {sim}0.6% trainable parameters while keeping the backbone frozen, and consistently improves reasoning performance over frozen baselines on mathematical reasoning and code generation benchmarks, with an average gain of 4.5% across all evaluations.

  • 8 authors
·
Mar 29

PBPO: Prefix-Block Policy Optimization for Diffusion Language Models

Diffusion Large Language Models (dLLMs) commonly decode responses by proceeding autoregressively across blocks while iteratively denoising multiple tokens within each block. This structure makes block-level policy optimization a natural adaptation of autoregressive policy optimization. However, the exact likelihood of a completed block is intractable because it marginalizes over the intermediate states and reveal orders of the denoising process. To realize the block-level formulation, we construct a prefix-block state and use a single model evaluation to define a factorized one-step surrogate for the block likelihood. The resulting block surrogate ratio is a product of its token surrogate ratios, allowing variation at individual positions to propagate across the entire block before clipping. We therefore introduce Prefix-Block Policy Optimization (PBPO), which preserves block-level conditioning but applies surrogate importance weighting and clipping separately to each token. PBPO further diversifies repeated updates by resampling corrupted views of the prompt and revealed prefix, a design motivated by masked-dLLM pre-training. Under our analysis assumptions, block-product weighting amplifies the variance of gradient contributions relative to token-local weighting. Across two LLaDA-family initializations, six benchmarks, and three generation lengths, PBPO achieves competitive performance against existing dLLM RL methods.

  • 9 authors
·
Nov 4

eDMD: Endpoint Distribution Matching for Few-Step Diffusion Distillation

Distribution matching distillation (DMD) has emerged as a leading paradigm for distilling diffusion models into few-step students, where an auxiliary fake score model tracks the student's distribution and the discrepancy between the teacher and fake predictions drives the student toward the teacher. In multi-step distillation, although only the student's final output is delivered, existing methods train the fake model on intermediate states or across all denoising steps. Consequently, the student's update signal becomes entangled with intermediate distributions, which can distort the matching direction and remain nonzero even after the student's final outputs already match the teacher distribution. To resolve this mismatch, we propose Endpoint Distribution Matching Distillation (eDMD), which trains a single shared fake model exclusively on the student's final outputs and uses it to correct every denoising step. Our theoretical analysis proves that this endpoint reference guarantees that the distribution matching term vanishes if and only if the student's final output distribution matches the teacher's, regardless of intermediate distributions. Beyond the fake reference, we further strengthen teacher supervision through a precise teacher (PT) that replaces single-step guided predictions with short multi-step trajectories on the final noise interval, paired with a calibrated query density for intermediate steps. Experiments on SD3-Medium, FLUX.2-klein (4B and 9B), and Qwen-Image-2.1 demonstrate that eDMD consistently outperforms existing distribution matching methods for 4-step generation.

  • 7 authors
·
Nov 11 4

EDICT: Exact Diffusion Inversion via Coupled Transformations

Finding an initial noise vector that produces an input image when fed into the diffusion process (known as inversion) is an important problem in denoising diffusion models (DDMs), with applications for real image editing. The state-of-the-art approach for real image editing with inversion uses denoising diffusion implicit models (DDIMs) to deterministically noise the image to the intermediate state along the path that the denoising would follow given the original conditioning. However, DDIM inversion for real images is unstable as it relies on local linearization assumptions, which result in the propagation of errors, leading to incorrect image reconstruction and loss of content. To alleviate these problems, we propose Exact Diffusion Inversion via Coupled Transformations (EDICT), an inversion method that draws inspiration from affine coupling layers. EDICT enables mathematically exact inversion of real and model-generated images by maintaining two coupled noise vectors which are used to invert each other in an alternating fashion. Using Stable Diffusion, a state-of-the-art latent diffusion model, we demonstrate that EDICT successfully reconstructs real images with high fidelity. On complex image datasets like MS-COCO, EDICT reconstruction significantly outperforms DDIM, improving the mean square error of reconstruction by a factor of two. Using noise vectors inverted from real images, EDICT enables a wide range of image edits--from local and global semantic edits to image stylization--while maintaining fidelity to the original image structure. EDICT requires no model training/finetuning, prompt tuning, or extra data and can be combined with any pretrained DDM. Code is available at https://github.com/salesforce/EDICT.

  • 3 authors
·
Nov 22, 2022

Training-free Diffusion Acceleration with Bottleneck Sampling

Diffusion models have demonstrated remarkable capabilities in visual content generation but remain challenging to deploy due to their high computational cost during inference. This computational burden primarily arises from the quadratic complexity of self-attention with respect to image or video resolution. While existing acceleration methods often compromise output quality or necessitate costly retraining, we observe that most diffusion models are pre-trained at lower resolutions, presenting an opportunity to exploit these low-resolution priors for more efficient inference without degrading performance. In this work, we introduce Bottleneck Sampling, a training-free framework that leverages low-resolution priors to reduce computational overhead while preserving output fidelity. Bottleneck Sampling follows a high-low-high denoising workflow: it performs high-resolution denoising in the initial and final stages while operating at lower resolutions in intermediate steps. To mitigate aliasing and blurring artifacts, we further refine the resolution transition points and adaptively shift the denoising timesteps at each stage. We evaluate Bottleneck Sampling on both image and video generation tasks, where extensive experiments demonstrate that it accelerates inference by up to 3times for image generation and 2.5times for video generation, all while maintaining output quality comparable to the standard full-resolution sampling process across multiple evaluation metrics. Code is available at: https://github.com/tyfeld/Bottleneck-Sampling

  • 9 authors
·
Mar 24, 2025 4

Depth as Time in One-Step Generative Models

The recent wave of one-step generative models, which compress the multi-step trajectory of diffusion via either distillation or learned flow maps, has reached an inflection point where they can generate high-quality images. Here, we ask a natural question that follows from these advances: what happens to the denoising trajectory of multi-step diffusion when generation is compressed into a single forward pass? We offer an empirical observation we call depth as time: the denoising computation that multi-step diffusion performs across sampling steps appears to unfold across the depth of a single forward pass, and can be recovered by decoding intermediate layers with the model's own output head. Most interestingly, we show that this depthwise computation depends on the transport task a flow map is trained to solve. The most surprising case is MeanFlow, where probing shorter transport intervals reveals both denoising and renoising within a single network evaluation. In contrast, generators trained without a time-indexed transport task, such as drifting models, do not exhibit the same depthwise denoising. Consequently, we show that models that exhibit the depthwise denoising phenomenon are more compressible across the layerwise computation: a MeanFlow SiT-L/2 model can be compressed by 16.6times in parameters into a single time-conditioned block. We offer an explanation for this denoise-then-renoise behavior and show that, when we treat the layerwise computation explicitly as a flow, a single time-conditioned block can be trained to denoise across layers, compressing a MeanFlow SiT-L/2 model by 16.6times in parameters. Together, these results suggest that the temporal computation of diffusion is not eliminated by one-step generation, but reorganized across network depth.

  • 5 authors
·
Oct 1

Dual Adversarial Network: Toward Real-world Noise Removal and Noise Generation

Real-world image noise removal is a long-standing yet very challenging task in computer vision. The success of deep neural network in denoising stimulates the research of noise generation, aiming at synthesizing more clean-noisy image pairs to facilitate the training of deep denoisers. In this work, we propose a novel unified framework to simultaneously deal with the noise removal and noise generation tasks. Instead of only inferring the posteriori distribution of the latent clean image conditioned on the observed noisy image in traditional MAP framework, our proposed method learns the joint distribution of the clean-noisy image pairs. Specifically, we approximate the joint distribution with two different factorized forms, which can be formulated as a denoiser mapping the noisy image to the clean one and a generator mapping the clean image to the noisy one. The learned joint distribution implicitly contains all the information between the noisy and clean images, avoiding the necessity of manually designing the image priors and noise assumptions as traditional. Besides, the performance of our denoiser can be further improved by augmenting the original training dataset with the learned generator. Moreover, we propose two metrics to assess the quality of the generated noisy image, for which, to the best of our knowledge, such metrics are firstly proposed along this research line. Extensive experiments have been conducted to demonstrate the superiority of our method over the state-of-the-arts both in the real noise removal and generation tasks. The training and testing code is available at https://github.com/zsyOAOA/DANet.

  • 4 authors
·
Jul 11, 2020

Learned Nonlocal Feature Matching and Filtering for RAW Image Denoising

Being one of the oldest and most basic problems in image processing, image denoising has seen a resurgence spurred by rapid advances in deep learning. Yet, most modern denoising architectures make limited use of the technical knowledge acquired researching the classical denoisers that came before the mainstream use of neural networks, instead relying on depth and large parameter counts. This poses a challenge not only for understanding the properties of such networks, but also for deploying them on real devices which may present resource constraints and diverse noise profiles. Tackling both issues, we propose an architecture dedicated to RAW-to-RAW denoising that incorporates the interpretable structure of classical self-similarity-based denoisers into a fully learnable neural network. Our design centers on a novel nonlocal block that parallels the established pipeline of neighbor matching, collaborative filtering and aggregation popularized by nonlocal patch-based methods, operating on learned multiscale feature representations. This built-in nonlocality efficiently expands the receptive field, sufficing a single block per scale with a moderate number of neighbors to obtain high-quality results. Training the network on a curated dataset with clean real RAW data and modeled synthetic noise while conditioning it on a noise level map yields a sensor-agnostic denoiser that generalizes effectively to unseen devices. Both quantitative and visual results on benchmarks and in-the-wild photographs position our method as a practical and interpretable solution for real-world RAW denoising, achieving results competitive with state-of-the-art convolutional and transformer-based denoisers while using significantly fewer parameters. The code is available at https://github.com/MIA-UIB/nonlocal-matchfilter .

  • 2 authors
·
Apr 18

MIGA: Mutual Information-Guided Attack on Denoising Models for Semantic Manipulation

Deep learning-based denoising models have been widely employed in vision tasks, functioning as filters to eliminate noise while retaining crucial semantic information. Additionally, they play a vital role in defending against adversarial perturbations that threaten downstream tasks. However, these models can be intrinsically susceptible to adversarial attacks due to their dependence on specific noise assumptions. Existing attacks on denoising models mainly aim at deteriorating visual clarity while neglecting semantic manipulation, rendering them either easily detectable or limited in effectiveness. In this paper, we propose Mutual Information-Guided Attack (MIGA), the first method designed to directly attack deep denoising models by strategically disrupting their ability to preserve semantic content via adversarial perturbations. By minimizing the mutual information between the original and denoised images, a measure of semantic similarity. MIGA forces the denoiser to produce perceptually clean yet semantically altered outputs. While these images appear visually plausible, they encode systematically distorted semantics, revealing a fundamental vulnerability in denoising models. These distortions persist in denoised outputs and can be quantitatively assessed through downstream task performance. We propose new evaluation metrics and systematically assess MIGA on four denoising models across five datasets, demonstrating its consistent effectiveness in disrupting semantic fidelity. Our findings suggest that denoising models are not always robust and can introduce security risks in real-world applications.

  • 7 authors
·
Mar 10, 2025

Unsupervised Real-World Denoising: Sparsity is All You Need

Supervised training for real-world denoising presents challenges due to the difficulty of collecting large datasets of paired noisy and clean images. Recent methods have attempted to address this by utilizing unpaired datasets of clean and noisy images. Some approaches leverage such unpaired data to train denoisers in a supervised manner by generating synthetic clean-noisy pairs. However, these methods often fall short due to the distribution gap between synthetic and real noisy images. To mitigate this issue, we propose a solution based on input sparsification, specifically using random input masking. Our method, which we refer to as Mask, Inpaint and Denoise (MID), trains a denoiser to simultaneously denoise and inpaint synthetic clean-noisy pairs. On one hand, input sparsification reduces the gap between synthetic and real noisy images. On the other hand, an inpainter trained in a supervised manner can still accurately reconstruct sparse inputs by predicting missing clean pixels using the remaining unmasked pixels. Our approach begins with a synthetic Gaussian noise sampler and iteratively refines it using a noise dataset derived from the denoiser's predictions. The noise dataset is created by subtracting predicted pseudo-clean images from real noisy images at each iteration. The core intuition is that improving the denoiser results in a more accurate noise dataset and, consequently, a better noise sampler. We validate our method through extensive experiments on real-world noisy image datasets, demonstrating competitive performance compared to existing unsupervised denoising methods.

  • 2 authors
·
Mar 27, 2025

Confidence-aware Denoised Fine-tuning of Off-the-shelf Models for Certified Robustness

The remarkable advances in deep learning have led to the emergence of many off-the-shelf classifiers, e.g., large pre-trained models. However, since they are typically trained on clean data, they remain vulnerable to adversarial attacks. Despite this vulnerability, their superior performance and transferability make off-the-shelf classifiers still valuable in practice, demanding further work to provide adversarial robustness for them in a post-hoc manner. A recently proposed method, denoised smoothing, leverages a denoiser model in front of the classifier to obtain provable robustness without additional training. However, the denoiser often creates hallucination, i.e., images that have lost the semantics of their originally assigned class, leading to a drop in robustness. Furthermore, its noise-and-denoise procedure introduces a significant distribution shift from the original distribution, causing the denoised smoothing framework to achieve sub-optimal robustness. In this paper, we introduce Fine-Tuning with Confidence-Aware Denoised Image Selection (FT-CADIS), a novel fine-tuning scheme to enhance the certified robustness of off-the-shelf classifiers. FT-CADIS is inspired by the observation that the confidence of off-the-shelf classifiers can effectively identify hallucinated images during denoised smoothing. Based on this, we develop a confidence-aware training objective to handle such hallucinated images and improve the stability of fine-tuning from denoised images. In this way, the classifier can be fine-tuned using only images that are beneficial for adversarial robustness. We also find that such a fine-tuning can be done by updating a small fraction of parameters of the classifier. Extensive experiments demonstrate that FT-CADIS has established the state-of-the-art certified robustness among denoised smoothing methods across all ell_2-adversary radius in various benchmarks.

  • 4 authors
·
Nov 14, 2024

Ensembling Diffusion Models via Adaptive Feature Aggregation

The success of the text-guided diffusion model has inspired the development and release of numerous powerful diffusion models within the open-source community. These models are typically fine-tuned on various expert datasets, showcasing diverse denoising capabilities. Leveraging multiple high-quality models to produce stronger generation ability is valuable, but has not been extensively studied. Existing methods primarily adopt parameter merging strategies to produce a new static model. However, they overlook the fact that the divergent denoising capabilities of the models may dynamically change across different states, such as when experiencing different prompts, initial noises, denoising steps, and spatial locations. In this paper, we propose a novel ensembling method, Adaptive Feature Aggregation (AFA), which dynamically adjusts the contributions of multiple models at the feature level according to various states (i.e., prompts, initial noises, denoising steps, and spatial locations), thereby keeping the advantages of multiple diffusion models, while suppressing their disadvantages. Specifically, we design a lightweight Spatial-Aware Block-Wise (SABW) feature aggregator that adaptive aggregates the block-wise intermediate features from multiple U-Net denoisers into a unified one. The core idea lies in dynamically producing an individual attention map for each model's features by comprehensively considering various states. It is worth noting that only SABW is trainable with about 50 million parameters, while other models are frozen. Both the quantitative and qualitative experiments demonstrate the effectiveness of our proposed Adaptive Feature Aggregation method. The code is available at https://github.com/tenvence/afa/.

  • 9 authors
·
May 27, 2024

Denoising Task Difficulty-based Curriculum for Training Diffusion Models

Diffusion-based generative models have emerged as powerful tools in the realm of generative modeling. Despite extensive research on denoising across various timesteps and noise levels, a conflict persists regarding the relative difficulties of the denoising tasks. While various studies argue that lower timesteps present more challenging tasks, others contend that higher timesteps are more difficult. To address this conflict, our study undertakes a comprehensive examination of task difficulties, focusing on convergence behavior and changes in relative entropy between consecutive probability distributions across timesteps. Our observational study reveals that denoising at earlier timesteps poses challenges characterized by slower convergence and higher relative entropy, indicating increased task difficulty at these lower timesteps. Building on these observations, we introduce an easy-to-hard learning scheme, drawing from curriculum learning, to enhance the training process of diffusion models. By organizing timesteps or noise levels into clusters and training models with ascending orders of difficulty, we facilitate an order-aware training regime, progressing from easier to harder denoising tasks, thereby deviating from the conventional approach of training diffusion models simultaneously across all timesteps. Our approach leads to improved performance and faster convergence by leveraging benefits of curriculum learning, while maintaining orthogonality with existing improvements in diffusion training techniques. We validate these advantages through comprehensive experiments in image generation tasks, including unconditional, class-conditional, and text-to-image generation.

  • 4 authors
·
Mar 15, 2024

Rethinking in Spikes: Mitigating Hallucinations in MDLMs with Step-Aware Decoding

Recent advancements in multimodal diffusion language models (MDLMs) have exhibited strong global modeling capabilities through iterative refinement. We observe that mask uncertainty follows an overall downward trend during iterative denoising, while a few denoising steps exhibit localized entropy spikes closely associated with hallucinations. We argue that anomalous steps can be identified by measuring the entropy deviation of each denoising step from its neighboring temporal window. We hypothesize that discrete token commitment discards the distributional information at masked positions, limiting the continued interaction between candidate semantics and the context during entropy spikes. With this goal, we present StepRefine, a plug-and-play decoding strategy that leverages semantic context to achieve reliable denoising. The core of our method lies in a step-aware switch between discrete denoising and latent refinement. The model employs probability-weighted embeddings at entropy spike steps to preserve diverse reasoning hypotheses and performs multiple rounds of continuous refinement. Meanwhile, a refinement controller monitors distributional stability to reduce unnecessary loops and switch the model back to standard discrete denoising. Through extensive experiments, StepRefine demonstrates significant hallucination mitigation across different MDLMs on multimodal benchmarks.

SPIN: Image Immunization Against Diffusion Editing via Single-Step Projection in Stochastic Neighborhoods

Diffusion models have greatly advanced instruction-guided image editing, while also raising concerns about unauthorized image manipulation. Image immunization addresses this risk by adding imperceptible perturbations to an input image to disrupt subsequent edits. Since editing requests are unknown at image release, protection should remain effective beyond the instruction used to construct the perturbation. Existing immunization methods either require costly full-trajectory backpropagation or use intermediate objectives whose effects may be weakened by subsequent denoising. Meanwhile, a single inference path provides limited feedback about alternative denoising continuations. To address these challenges, we propose SPIN, a framework for image immunization via one-step projection over local stochastic trajectory neighborhoods. Starting from an early denoising state, SPIN generates stochastic neighboring states under the same instruction and predicts their clean latents through one-step projection without full unrolling. We then optimize a bounded input perturbation to maximize the average deviation of these predictions from a clean-edit reference, encouraging the perturbation to disrupt multiple possible editing outcomes. Experiments on two image editors demonstrate substantial gains in protection performance, with SPIN outperforming compared methods across all six metrics under seen instructions and in the more challenging unseen instruction setting.

  • 6 authors
·
Oct 4

Micro-Diffusion Compression -- Binary Tree Tweedie Denoising for Online Probability Estimation

We present Midicoth, a lossless compression system that introduces a micro-diffusion denoising layer for improving probability estimates produced by adaptive statistical models. In compressors such as Prediction by Partial Matching (PPM), probability estimates are smoothed by a prior to handle sparse observations. When contexts have been seen only a few times, this prior dominates the prediction and produces distributions that are significantly flatter than the true source distribution, leading to compression inefficiency. Midicoth addresses this limitation by treating prior smoothing as a shrinkage process and applying a reverse denoising step that corrects predicted probabilities using empirical calibration statistics. To make this correction data-efficient, the method decomposes each byte prediction into a hierarchy of binary decisions along a bitwise tree. This converts a single 256-way calibration problem into a sequence of binary calibration tasks, enabling reliable estimation of correction terms from relatively small numbers of observations. The denoising process is applied in multiple successive steps, allowing each stage to refine residual prediction errors left by the previous one. The micro-diffusion layer operates as a lightweight post-blend calibration stage applied after all model predictions have been combined, allowing it to correct systematic biases in the final probability distribution. Midicoth combines five fully online components: an adaptive PPM model, a long-range match model, a trie-based word model, a high-order context model, and the micro-diffusion denoiser applied as the final stage.

  • 1 authors
·
Mar 9 2

Physics-based Noise Modeling for Extreme Low-light Photography

Enhancing the visibility in extreme low-light environments is a challenging task. Under nearly lightless condition, existing image denoising methods could easily break down due to significantly low SNR. In this paper, we systematically study the noise statistics in the imaging pipeline of CMOS photosensors, and formulate a comprehensive noise model that can accurately characterize the real noise structures. Our novel model considers the noise sources caused by digital camera electronics which are largely overlooked by existing methods yet have significant influence on raw measurement in the dark. It provides a way to decouple the intricate noise structure into different statistical distributions with physical interpretations. Moreover, our noise model can be used to synthesize realistic training data for learning-based low-light denoising algorithms. In this regard, although promising results have been shown recently with deep convolutional neural networks, the success heavily depends on abundant noisy clean image pairs for training, which are tremendously difficult to obtain in practice. Generalizing their trained models to images from new devices is also problematic. Extensive experiments on multiple low-light denoising datasets -- including a newly collected one in this work covering various devices -- show that a deep neural network trained with our proposed noise formation model can reach surprisingly-high accuracy. The results are on par with or sometimes even outperform training with paired real data, opening a new door to real-world extreme low-light photography.

  • 4 authors
·
Aug 4, 2021

Physics-guided Noise Neural Proxy for Practical Low-light Raw Image Denoising

Recently, the mainstream practice for training low-light raw image denoising methods has shifted towards employing synthetic data. Noise modeling, which focuses on characterizing the noise distribution of real-world sensors, profoundly influences the effectiveness and practicality of synthetic data. Currently, physics-based noise modeling struggles to characterize the entire real noise distribution, while learning-based noise modeling impractically depends on paired real data. In this paper, we propose a novel strategy: learning the noise model from dark frames instead of paired real data, to break down the data dependency. Based on this strategy, we introduce an efficient physics-guided noise neural proxy (PNNP) to approximate the real-world sensor noise model. Specifically, we integrate physical priors into neural proxies and introduce three efficient techniques: physics-guided noise decoupling (PND), physics-guided proxy model (PPM), and differentiable distribution loss (DDL). PND decouples the dark frame into different components and handles different levels of noise flexibly, which reduces the complexity of noise modeling. PPM incorporates physical priors to constrain the generated noise, which promotes the accuracy of noise modeling. DDL provides explicit and reliable supervision for noise distribution, which promotes the precision of noise modeling. PNNP exhibits powerful potential in characterizing the real noise distribution. Extensive experiments on public datasets demonstrate superior performance in practical low-light raw image denoising. The code will be available at https://github.com/fenghansen/PNNP.

  • 6 authors
·
Oct 13, 2023

LIDIA: Lightweight Learned Image Denoising with Instance Adaptation

Image denoising is a well studied problem with an extensive activity that has spread over several decades. Despite the many available denoising algorithms, the quest for simple, powerful and fast denoisers is still an active and vibrant topic of research. Leading classical denoising methods are typically designed to exploit the inner structure in images by modeling local overlapping patches, while operating in an unsupervised fashion. In contrast, recent newcomers to this arena are supervised and universal neural-network-based methods that bypass this modeling altogether, targeting the inference goal directly and globally, while tending to be very deep and parameter heavy. This work proposes a novel lightweight learnable architecture for image denoising, and presents a combination of supervised and unsupervised training of it, the first aiming for a universal denoiser and the second for adapting it to the incoming image. Our architecture embeds in it several of the main concepts taken from classical methods, relying on patch processing, leveraging non-local self-similarity, exploiting representation sparsity and providing a multiscale treatment. Our proposed universal denoiser achieves near state-of-the-art results, while using a small fraction of the typical number of parameters. In addition, we introduce and demonstrate two highly effective ways for further boosting the denoising performance, by adapting this universal network to the input image.

  • 3 authors
·
Nov 17, 2019

Enhancing a Convolutional Autoencoder with a Quantum Approximate Optimization Algorithm for Image Noise Reduction

Image denoising is essential for removing noise in images caused by electric device malfunctions or other factors during image acquisition. It helps preserve image quality and interpretation. Many convolutional autoencoder algorithms have proven effective in image denoising. Owing to their promising efficiency, quantum computers have gained popularity. This study introduces a quantum convolutional autoencoder (QCAE) method for improved image denoising. This method was developed by substituting the representative latent space of the autoencoder with a quantum circuit. To enhance efficiency, we leveraged the advantages of the quantum approximate optimization algorithm (QAOA)-incorporated parameter-shift rule to identify an optimized cost function, facilitating effective learning from data and gradient computation on an actual quantum computer. The proposed QCAE method outperformed its classical counterpart as it exhibited lower training loss and a higher structural similarity index (SSIM) value. QCAE also outperformed its classical counterpart in denoising the MNIST dataset by up to 40% in terms of SSIM value, confirming its enhanced capabilities in real-world applications. Evaluation of QAOA performance across different circuit configurations and layer variations showed that our technique outperformed other circuit designs by 25% on average.

  • 4 authors
·
Jan 11, 2024

CtrlCache: Accelerating Interactive Video World Models with Control-Aware Caching

Interactive video world models need to generate each video chunk efficiently while responding faithfully to user controls. Many systems use chunk-wise autoregressive generation with few-step denoising, but each chunk still requires several costly denoising iterations. Training-free caching can reduce this cost, yet existing policies make reuse decisions primarily from model-internal denoising dynamics and do not explicitly account for control transitions. Actually, interactive generation explicitly exposes a signal they do not use: the controls for a chunk arrive before it is denoised, so a schedule derived from them costs no forward pass. To this end, we analyze adjacent chunks under different control regimes and find that structural similarity drops around action changes, while low-frequency structure remains more persistent than high-frequency detail. Motivated by these observations, we propose CtrlCache, a training-free control-aware caching framework that adapts computation to the current control sequence. Specifically, the action-aware scheduling and refresh policy detects action changes across and within chunks, and labels each chunk as initial, transition, turning, or steady state. At one selected interior denoising step, initial and transition chunks retain full computation, while turning and steady chunks reuse the transformer residual from the most recent fully computed step in the same chunk. To exploit the persistence of low-frequency structure during steady interaction, we further introduce a frequency-mixed history prior guidance that incorporates complementary information from the preceding clean latent without an additional DiT forward pass. Evaluated on Matrix-Game 2.0 and LingBot-World v1/v2, CtrlCache achieves 1.21x to 1.41x DiT-backbone speedups without model retraining while improving WBench Overall scores over original inference across all three models.

  • 5 authors
·
Oct 5 2

EVODiff: Entropy-aware Variance Optimized Diffusion Inference

Diffusion models (DMs) excel in image generation, but suffer from slow inference and the training-inference discrepancies. Although gradient-based solvers like DPM-Solver accelerate the denoising inference, they lack theoretical foundations in information transmission efficiency. In this work, we introduce an information-theoretic perspective on the inference processes of DMs, revealing that successful denoising fundamentally reduces conditional entropy in reverse transitions. This principle leads to our key insights into the inference processes: (1) data prediction parameterization outperforms its noise counterpart, and (2) optimizing conditional variance offers a reference-free way to minimize both transition and reconstruction errors. Based on these insights, we propose an entropy-aware variance optimized method for the generative process of DMs, called EVODiff, which systematically reduces uncertainty by optimizing conditional entropy during denoising. Extensive experiments on DMs validate our insights and demonstrate that our method significantly and consistently outperforms state-of-the-art (SOTA) gradient-based solvers. For example, compared to the DPM-Solver++, EVODiff reduces the reconstruction error by up to 45.5\% (FID improves from 5.10 to 2.78) at 10 function evaluations (NFE) on CIFAR-10, cuts the NFE cost by 25\% (from 20 to 15 NFE) for high-quality samples on ImageNet-256, and improves text-to-image generation while reducing artifacts. Code is available at https://github.com/ShiguiLi/EVODiff.

BCT: Bayes-Consistent Tempering for Flow Language Models

Temperature scaling is typically applied as a post-hoc transformation of model probabilities. In posterior-induced flow language models, this creates two mismatches. First, posterior tempering implicitly changes both the endpoint distribution and the distribution of intermediate noisy states, while the denoiser remains trained on the original states. Second, the tempered posterior weights are combined with transport dynamics derived for the untempered flow. These mismatches are reflected empirically: lowering temperature improves GSM8K performance much less reliably in flow LMs than in discrete diffusion LMs. We introduce Bayes-Consistent Tempering (BCT), which makes temperature explicit in both the distributions and dynamics of the generative flow. Its learned realization trains the denoiser on tempered intermediate states and tempers the endpoint distribution using the corresponding tempered dynamics. We also derive training-free variants for conventionally trained checkpoints. Across hyperspherical flow LMs with two denoiser architectures and a von Mises--Fisher flow LM, BCT improves GSM8K generation across broad temperature ranges and achieves the strongest tempering performance. The gains also extend to Sudoku, demonstrating benefits on tightly constrained generation. At very low temperatures, the learned realization is also markedly more robust than the training-free variants, supporting temperature as a property of the generative flow across training and inference rather than a post-hoc probability adjustment. Code and model weights are available at https://daioba.github.io/bct .

  • 3 authors
·
Oct 19

GeneOH Diffusion: Towards Generalizable Hand-Object Interaction Denoising via Denoising Diffusion

In this work, we tackle the challenging problem of denoising hand-object interactions (HOI). Given an erroneous interaction sequence, the objective is to refine the incorrect hand trajectory to remove interaction artifacts for a perceptually realistic sequence. This challenge involves intricate interaction noise, including unnatural hand poses and incorrect hand-object relations, alongside the necessity for robust generalization to new interactions and diverse noise patterns. We tackle those challenges through a novel approach, GeneOH Diffusion, incorporating two key designs: an innovative contact-centric HOI representation named GeneOH and a new domain-generalizable denoising scheme. The contact-centric representation GeneOH informatively parameterizes the HOI process, facilitating enhanced generalization across various HOI scenarios. The new denoising scheme consists of a canonical denoising model trained to project noisy data samples from a whitened noise space to a clean data manifold and a "denoising via diffusion" strategy which can handle input trajectories with various noise patterns by first diffusing them to align with the whitened noise space and cleaning via the canonical denoiser. Extensive experiments on four benchmarks with significant domain variations demonstrate the superior effectiveness of our method. GeneOH Diffusion also shows promise for various downstream applications. Project website: https://meowuu7.github.io/GeneOH-Diffusion/.

  • 2 authors
·
Feb 22, 2024 1

Locality in Image Diffusion Models Emerges from Data Statistics

Among generative models, diffusion models are uniquely intriguing due to the existence of a closed-form optimal minimizer of their training objective, often referred to as the optimal denoiser. However, diffusion using this optimal denoiser merely reproduces images in the training set and hence fails to capture the behavior of deep diffusion models. Recent work has attempted to characterize this gap between the optimal denoiser and deep diffusion models, proposing analytical, training-free models that can generate images that resemble those generated by a trained UNet. The best-performing method hypothesizes that shift equivariance and locality inductive biases of convolutional neural networks are the cause of the performance gap, hence incorporating these assumptions into its analytical model. In this work, we present evidence that the locality in deep diffusion models emerges as a statistical property of the image dataset, not due to the inductive bias of convolutional neural networks. Specifically, we demonstrate that an optimal parametric linear denoiser exhibits similar locality properties to the deep neural denoisers. We further show, both theoretically and experimentally, that this locality arises directly from the pixel correlations present in natural image datasets. Finally, we use these insights to craft an analytical denoiser that better matches scores predicted by a deep diffusion model than the prior expert-crafted alternative.

  • 4 authors
·
Sep 11, 2025 2

Dehazing Ultrasound using Diffusion Models

Echocardiography has been a prominent tool for the diagnosis of cardiac disease. However, these diagnoses can be heavily impeded by poor image quality. Acoustic clutter emerges due to multipath reflections imposed by layers of skin, subcutaneous fat, and intercostal muscle between the transducer and heart. As a result, haze and other noise artifacts pose a real challenge to cardiac ultrasound imaging. In many cases, especially with difficult-to-image patients such as patients with obesity, a diagnosis from B-Mode ultrasound imaging is effectively rendered unusable, forcing sonographers to resort to contrast-enhanced ultrasound examinations or refer patients to other imaging modalities. Tissue harmonic imaging has been a popular approach to combat haze, but in severe cases is still heavily impacted by haze. Alternatively, denoising algorithms are typically unable to remove highly structured and correlated noise, such as haze. It remains a challenge to accurately describe the statistical properties of structured haze, and develop an inference method to subsequently remove it. Diffusion models have emerged as powerful generative models and have shown their effectiveness in a variety of inverse problems. In this work, we present a joint posterior sampling framework that combines two separate diffusion models to model the distribution of both clean ultrasound and haze in an unsupervised manner. Furthermore, we demonstrate techniques for effectively training diffusion models on radio-frequency ultrasound data and highlight the advantages over image data. Experiments on both in-vitro and in-vivo cardiac datasets show that the proposed dehazing method effectively removes haze while preserving signals from weakly reflected tissue.

  • 6 authors
·
Jul 20, 2023

Noise2Score: Tweedie's Approach to Self-Supervised Image Denoising without Clean Images

Recently, there has been extensive research interest in training deep networks to denoise images without clean reference. However, the representative approaches such as Noise2Noise, Noise2Void, Stein's unbiased risk estimator (SURE), etc. seem to differ from one another and it is difficult to find the coherent mathematical structure. To address this, here we present a novel approach, called Noise2Score, which reveals a missing link in order to unite these seemingly different approaches. Specifically, we show that image denoising problems without clean images can be addressed by finding the mode of the posterior distribution and that the Tweedie's formula offers an explicit solution through the score function (i.e. the gradient of log likelihood). Our method then uses the recent finding that the score function can be stably estimated from the noisy images using the amortized residual denoising autoencoder, the method of which is closely related to Noise2Noise or Nose2Void. Our Noise2Score approach is so universal that the same network training can be used to remove noises from images that are corrupted by any exponential family distributions and noise parameters. Using extensive experiments with Gaussian, Poisson, and Gamma noises, we show that Noise2Score significantly outperforms the state-of-the-art self-supervised denoising methods in the benchmark data set such as (C)BSD68, Set12, and Kodak, etc.

  • 2 authors
·
Jun 13, 2021

Correction Training for Diffusion Models

Iterative sampling in diffusion models can lead to error accumulation due to exposure bias. The denoiser is trained on real images interpolated with noise, but at inference its inputs are constructed from its own imperfect predictions from the earlier steps, something it has never seen at training time. This might be one reason diffusion models often struggle without additional help, such as CFG. We introduce a correction step for diffusion models which attempts to reduce this training-inference gap. The corrector takes the base model's prediction as input and is trained against the same ground-truth target. This makes correction an explicit learning task, with training inputs provided by the base model. During sampling, at each denoising step, we iteratively refine the denoiser's clean-sample prediction. This allows us to correct predictions at intermediate denoising steps, preventing early artifacts from persisting into the final sample. Although the corrector is trained only on predictions from the base denoiser, it can be applied repeatedly to its own outputs at inference for better results. This simple framework leads to substantial improvement in sample quality while largely preserving diversity. We evaluate our method across DiT, SiT, and JiT. Our method substantially improves upon previously reported FID scores for unguided generation and, notably, unconditional generation, where producing high-quality samples without guidance has been particularly challenging. Our method achieves performance competitive with classifier-free guidance (CFG), and combining correction with CFG further improves diversity and reduces oversaturation typical of CFG. Finally, we show that the additional inference cost of correction can be amortized by distilling the refined predictions back into the base diffusion model, retaining the quality gains without additional inference-time overhead.

CallCleaner: Lightweight Bioacoustic Denoising from an Audio Foundation Model

Many studies of animal vocalizations require clean recordings, but animals are usually recorded in the field, with background noise from weather, vehicles, and other animals. Animal vocalization denoising is challenged by the scarcity of clean training data and the extreme diversity of animal vocalizations. Classical spectral gates leave residual noise, especially without voice activity detection (VAD), while detector-free neural denoisers designed for bioacoustics remove less noise. We show that a general-purpose source separation foundation model, SAM-Audio, removes more noise than either of these types of methods, when used without training and prompted with time spans from a simple animal VAD. To turn this heavy method into a practical tool, we distill it into CallCleaner, a 19M-parameter denoiser that needs no detector and runs ~90x faster than real time on a laptop CPU. We find that SI-SDR has limited utility in our setting as it penalizes regenerated output and conflates noise removal with call fidelity, a trade-off our separate metrics reveal. CallCleaner leaves 11 dB less noise around the call than Biodenoising, the leading neural bioacoustic denoiser with public weights, and among fast, CPU-capable systems it pushes the Pareto frontier of noise removal vs. call fidelity, without requiring a detector. We release code and weights for CallCleaner, which enables fast, private, local denoising of single-caller recordings without specialized hardware.

  • 3 authors
·
Nov 7

DualDn: Dual-domain Denoising via Differentiable ISP

Image denoising is a critical component in a camera's Image Signal Processing (ISP) pipeline. There are two typical ways to inject a denoiser into the ISP pipeline: applying a denoiser directly to captured raw frames (raw domain) or to the ISP's output sRGB images (sRGB domain). However, both approaches have their limitations. Residual noise from raw-domain denoising can be amplified by the subsequent ISP processing, and the sRGB domain struggles to handle spatially varying noise since it only sees noise distorted by the ISP. Consequently, most raw or sRGB domain denoising works only for specific noise distributions and ISP configurations. To address these challenges, we propose DualDn, a novel learning-based dual-domain denoising. Unlike previous single-domain denoising, DualDn consists of two denoising networks: one in the raw domain and one in the sRGB domain. The raw domain denoising adapts to sensor-specific noise as well as spatially varying noise levels, while the sRGB domain denoising adapts to ISP variations and removes residual noise amplified by the ISP. Both denoising networks are connected with a differentiable ISP, which is trained end-to-end and discarded during the inference stage. With this design, DualDn achieves greater generalizability compared to most learning-based denoising methods, as it can adapt to different unseen noises, ISP parameters, and even novel ISP pipelines. Experiments show that DualDn achieves state-of-the-art performance and can adapt to different denoising architectures. Moreover, DualDn can be used as a plug-and-play denoising module with real cameras without retraining, and still demonstrate better performance than commercial on-camera denoising. The project website is available at: https://openimaginglab.github.io/DualDn/

  • 6 authors
·
Nov 3, 2024

One More Step: A Versatile Plug-and-Play Module for Rectifying Diffusion Schedule Flaws and Enhancing Low-Frequency Controls

It is well known that many open-released foundational diffusion models have difficulty in generating images that substantially depart from average brightness, despite such images being present in the training data. This is due to an inconsistency: while denoising starts from pure Gaussian noise during inference, the training noise schedule retains residual data even in the final timestep distribution, due to difficulties in numerical conditioning in mainstream formulation, leading to unintended bias during inference. To mitigate this issue, certain epsilon-prediction models are combined with an ad-hoc offset-noise methodology. In parallel, some contemporary models have adopted zero-terminal SNR noise schedules together with v-prediction, which necessitate major alterations to pre-trained models. However, such changes risk destabilizing a large multitude of community-driven applications anchored on these pre-trained models. In light of this, our investigation revisits the fundamental causes, leading to our proposal of an innovative and principled remedy, called One More Step (OMS). By integrating a compact network and incorporating an additional simple yet effective step during inference, OMS elevates image fidelity and harmonizes the dichotomy between training and inference, while preserving original model parameters. Once trained, various pre-trained diffusion models with the same latent domain can share the same OMS module.

  • 6 authors
·
Nov 27, 2023

Post-training Quantization on Diffusion Models

Denoising diffusion (score-based) generative models have recently achieved significant accomplishments in generating realistic and diverse data. These approaches define a forward diffusion process for transforming data into noise and a backward denoising process for sampling data from noise. Unfortunately, the generation process of current denoising diffusion models is notoriously slow due to the lengthy iterative noise estimations, which rely on cumbersome neural networks. It prevents the diffusion models from being widely deployed, especially on edge devices. Previous works accelerate the generation process of diffusion model (DM) via finding shorter yet effective sampling trajectories. However, they overlook the cost of noise estimation with a heavy network in every iteration. In this work, we accelerate generation from the perspective of compressing the noise estimation network. Due to the difficulty of retraining DMs, we exclude mainstream training-aware compression paradigms and introduce post-training quantization (PTQ) into DM acceleration. However, the output distributions of noise estimation networks change with time-step, making previous PTQ methods fail in DMs since they are designed for single-time step scenarios. To devise a DM-specific PTQ method, we explore PTQ on DM in three aspects: quantized operations, calibration dataset, and calibration metric. We summarize and use several observations derived from all-inclusive investigations to formulate our method, which especially targets the unique multi-time-step structure of DMs. Experimentally, our method can directly quantize full-precision DMs into 8-bit models while maintaining or even improving their performance in a training-free manner. Importantly, our method can serve as a plug-and-play module on other fast-sampling methods, e.g., DDIM. The code is available at https://github.com/42Shawn/PTQ4DM .

  • 5 authors
·
Nov 28, 2022

How Transparent is DiffusionGemma?

LLM reasoning transparency is a critical affordance for understanding model decisions, mitigating misuse and misalignment, and debugging surprising model behaviors. However, DiffusionGemma performs a larger fraction of its computation in a continuous latent space; does this make its reasoning less transparent? We study this question by decomposing transparency into two components: variable transparency, whether we understand intermediate snapshots of a model's computational state; and algorithmic transparency, whether we can use these snapshots to reconstruct the process by which the model arrived at its outputs. Naively, DiffusionGemma has poor variable transparency: its opaque serial depth, the amount of serial computation that occurs in between interpretable model states, seems at first 28.6X higher than the corresponding autoregressive Gemma 4 model. However, we show that we can map the information flowing between denoising steps through an interpretable token bottleneck with no decrease in downstream performance. Treating these intermediate states as interpretable reduces the opaque serial depth to just 1.1X that of Gemma 4. Algorithmic transparency is harder for diffusion models than for autoregressive models because all token predictions in the canvas can change at every denoising step, giving the model the power to implement complicated distributed algorithms during the denoising process. To begin bridging this gap, we conduct a suite of interpretability case studies, uncovering initial evidence of novel diffusion-specific phenomena such as non-chronological reasoning, token and sequence smearing, and intermediate-context reasoning. Finally, we test monitorability, a key application of transparency that measures whether model outputs are useful for downstream tasks. We find that DiffusionGemma is similarly monitorable to Gemma 4.

  • 14 authors
·
Jun 17

Filter2Noise: Interpretable Self-Supervised Single-Image Denoising for Low-Dose CT with Attention-Guided Bilateral Filtering

Effective denoising is crucial in low-dose CT to enhance subtle structures and low-contrast lesions while preventing diagnostic errors. Supervised methods struggle with limited paired datasets, and self-supervised approaches often require multiple noisy images and rely on deep networks like U-Net, offering little insight into the denoising mechanism. To address these challenges, we propose an interpretable self-supervised single-image denoising framework -- Filter2Noise (F2N). Our approach introduces an Attention-Guided Bilateral Filter that adapted to each noisy input through a lightweight module that predicts spatially varying filter parameters, which can be visualized and adjusted post-training for user-controlled denoising in specific regions of interest. To enable single-image training, we introduce a novel downsampling shuffle strategy with a new self-supervised loss function that extends the concept of Noise2Noise to a single image and addresses spatially correlated noise. On the Mayo Clinic 2016 low-dose CT dataset, F2N outperforms the leading self-supervised single-image method (ZS-N2N) by 4.59 dB PSNR while improving transparency, user control, and parametric efficiency. These features provide key advantages for medical applications that require precise and interpretable noise reduction. Our code is demonstrated at https://github.com/sypsyp97/Filter2Noise.git .

  • 8 authors
·
Apr 18, 2025 2

An Edit Friendly DDPM Noise Space: Inversion and Manipulations

Denoising diffusion probabilistic models (DDPMs) employ a sequence of white Gaussian noise samples to generate an image. In analogy with GANs, those noise maps could be considered as the latent code associated with the generated image. However, this native noise space does not possess a convenient structure, and is thus challenging to work with in editing tasks. Here, we propose an alternative latent noise space for DDPM that enables a wide range of editing operations via simple means, and present an inversion method for extracting these edit-friendly noise maps for any given image (real or synthetically generated). As opposed to the native DDPM noise space, the edit-friendly noise maps do not have a standard normal distribution and are not statistically independent across timesteps. However, they allow perfect reconstruction of any desired image, and simple transformations on them translate into meaningful manipulations of the output image (e.g., shifting, color edits). Moreover, in text-conditional models, fixing those noise maps while changing the text prompt, modifies semantics while retaining structure. We illustrate how this property enables text-based editing of real images via the diverse DDPM sampling scheme (in contrast to the popular non-diverse DDIM inversion). We also show how it can be used within existing diffusion-based editing methods to improve their quality and diversity.

  • 3 authors
·
Apr 12, 2023

A First-Step Bias Restores Lost Diversity in Diffusion Model Distillation

Distribution-matching distillation enables high-quality image generation in only a few denoising steps. However, distilled student models often map different initial noise samples to similar outputs under the same prompt. To locate where diversity is lost, we compare the teacher and student along the sampling trajectory. The largest measured reduction in the response to different initial noises occurs during the first, high-noise step. When we replace the first step with the teacher's corresponding trajectory and leave the final three student steps unchanged, most of the output diversity returns. This suggests that the first step is a key point for restoring diversity. Motivated by this finding, we introduce ReSeed, a post-distillation method that adds a seed-response bias adapter only to the first student step and aligns its velocity with the teacher's first-interval secant velocity. All student weights and later denoising steps remain unchanged. We evaluate ReSeed on three text-to-image models (SD3-Medium, SD3.5-Medium, and FLUX.1-dev) and one text-to-video model (Wan2.1-T2V-1.3B). For a distilled 4-step FLUX.1-dev model, ReSeed requires only 0.00196% additional trainable parameters relative to the base model and is trained on 8,000 prompt--noise pairs, while keeping the distilled student fully frozen and requiring no target images, perceptual losses, or adversarial losses. It improves DINO diversity by 48.3% while maintaining competitive visual quality. These results show that substantial diversity can be recovered through a lightweight, data-efficient tuning of only the first denoising step, without finetuning the full student model.

  • 4 authors
·
Oct 26

YeTI: You Only Need Two Noisy Images for Real-World sRGB Noise Generation

Real-world sRGB image denoising remains challenging due to the nonlinear characteristics of sensor noise and the difficulty of acquiring aligned clean-noisy image pairs. Supervised denoisers often overfit to limited paired datasets, while self-supervised methods still depend on sufficiently diverse noisy observations. These limitations motivate scalable noise synthesis methods that can model real-world noise without clean ground truth or camera metadata. We propose YeTI, a real-world sRGB noise generation framework that learns from only two noisy observations of the same scene. YeTI uses a Reconstruction Autoencoder to disentangle scene structure and noise characteristics, and models the latent noise distribution with a one-step Conditional Diffusion Transformer trained using consistency objectives. Given a single noisy input at inference time, YeTI generates realistic, signal-dependent noise while preserving the underlying scene content. Extensive experiments demonstrate the effectiveness of YeTI across real-world benchmarks. We evaluate noise generation on SIDD and further assess generalization on SIDD+, MAI2021, and SID, covering smartphone and diverse consumer-camera sensors. Downstream denoising results on DND further show that denoisers trained with YeTI-synthesized images achieve strong real-world performance, highlighting the practical value of clean-image-free and metadata-free noise generation.

  • 5 authors
·
Jul 10

Invertible Diffusion Models for Compressed Sensing

While deep neural networks (NN) significantly advance image compressed sensing (CS) by improving reconstruction quality, the necessity of training current CS NNs from scratch constrains their effectiveness and hampers rapid deployment. Although recent methods utilize pre-trained diffusion models for image reconstruction, they struggle with slow inference and restricted adaptability to CS. To tackle these challenges, this paper proposes Invertible Diffusion Models (IDM), a novel efficient, end-to-end diffusion-based CS method. IDM repurposes a large-scale diffusion sampling process as a reconstruction model, and fine-tunes it end-to-end to recover original images directly from CS measurements, moving beyond the traditional paradigm of one-step noise estimation learning. To enable such memory-intensive end-to-end fine-tuning, we propose a novel two-level invertible design to transform both (1) multi-step sampling process and (2) noise estimation U-Net in each step into invertible networks. As a result, most intermediate features are cleared during training to reduce up to 93.8% GPU memory. In addition, we develop a set of lightweight modules to inject measurements into noise estimator to further facilitate reconstruction. Experiments demonstrate that IDM outperforms existing state-of-the-art CS networks by up to 2.64dB in PSNR. Compared to the recent diffusion-based approach DDNM, our IDM achieves up to 10.09dB PSNR gain and 14.54 times faster inference. Code is available at https://github.com/Guaishou74851/IDM.

  • 8 authors
·
Mar 25, 2024

ZEUS: Accelerating Diffusion Models with Only Second-Order Predictor

Denoising generative models deliver high-fidelity generation but remain bottlenecked by inference latency due to the many iterative denoiser calls required during sampling. Training-free acceleration methods reduce latency by either sparsifying the model architecture or shortening the sampling trajectory. Current training-free acceleration methods are more complex than necessary: higher-order predictors amplify error under aggressive speedups, and architectural modifications hinder deployment. Beyond 2x acceleration, step skipping creates structural scarcity -- at most one fresh evaluation per local window -- leaving the computed output and its backward difference as the only causally grounded information. Based on this, we propose ZEUS, an acceleration method that predicts reduced denoiser evaluations using a second-order predictor, and stabilizes aggressive consecutive skipping with an interleaved scheme that avoids back-to-back extrapolations. ZEUS adds essentially zero overhead, no feature caches, and no architectural modifications, and it is compatible with different backbones, prediction objectives, and solver choices. Across image and video generation, ZEUS consistently improves the speed-fidelity performance over recent training-free baselines, achieving up to 3.2x end-to-end speedup while maintaining perceptual quality. Our code is available at: https://github.com/Ting-Justin-Jiang/ZEUS.

  • 9 authors
·
Apr 1

Why Low-Light Cameras Go Color Blind: Removing Color Bias in Raw Denoising

Raw images inherently suffer from noise due to the stochastic nature of light and sensor hardware imperfections. As real photon counts fall, the ratio of this noise to the signal degrades; consequently, for low-light conditions, robust denoising is especially vital for high-quality results. While recent data-driven methods achieve strong performance, they typically rely on large-scale noisy-clean image pairs that are costly and difficult to collect. Alternatively, parametric noise models can generate synthetic training data, but this necessitates precise camera calibration, which is often impractical for unknown devices. In this work, we propose a camera-agnostic, calibration-free paradigm for low-light raw denoising. We identify that color bias from black-level error is a primary source of performance degradation and causes severe color shifts. To mitigate this, we introduce a bias estimator network that predicts the black-level error as a global feature of the noisy input. We evaluate our approach across the ELD, SID, and LRID datasets, demonstrating superior performance among blind denoisers, particularly in terms of color correction. In many cases, we are competitive with-or can even surpass-methods with stronger supervision. Furthermore, we reveal that the widely used SIDD dataset contains significant color bias in its ground-truth images, which yields unrealistic color reproduction in trained models. We introduce a new ground-truth extraction framework to resolve this issue and provide a benchmark of existing methods on the corrected dataset.

  • 9 authors
·
Jul 12