Daily Papers

Dexterous hands enable concurrent prehensile and nonprehensile manipulation, such as holding one object while interacting with another, a capability essential for everyday tasks yet underexplored in robotics. Learning such long-horizon, contact-rich multi-stage behaviors is challenging because demonstrations are expensive to collect and end-to-end policies require substantial data to generalize across varied object geometries and placements. We present DexMulti, a sample-efficient approach for real-world dexterous multi-task manipulation that decomposes demonstrations into object-centric skills with well-defined temporal boundaries. Rather than learning monolithic policies, our method retrieves demonstrated skills based on current object geometry, aligns them to the observed object state using an uncertainty-aware estimator that tracks centroid and yaw, and executes them via a retrieve-align-execute paradigm. We evaluate on three multi-stage tasks requiring concurrent manipulation (Grasp + Pull, Grasp + Open, and Grasp + Grasp) across two dexterous hands (Allegro and LEAP) in over 1,000 real-world trials. Our approach achieves an average success rate of 66% on training objects with only 3-4 demonstrations per object, outperforming diffusion policy baselines by 2-3x while requiring far fewer demonstrations. Results demonstrate robust generalization to held-out objects and spatial variations up to +/-25 cm.

While learning visuomotor skills in an end-to-end manner is appealing, deep neural networks are often uninterpretable and fail in surprising ways. For robotics tasks, such as autonomous driving, models that explicitly represent objects may be more robust to new scenes and provide intuitive visualizations. We describe a taxonomy of "object-centric" models which leverage both object instances and end-to-end learning. In the Grand Theft Auto V simulator, we show that object-centric models outperform object-agnostic methods in scenes with other vehicles and pedestrians, even with an imperfect detector. We also demonstrate that our architectures perform well on real-world environments by evaluating on the Berkeley DeepDrive Video dataset, where an object-centric model outperforms object-agnostic models in the low-data regimes.

General-purpose robots must master long-horizon manipulation, defined as tasks involving multiple kinematic structure changes (e.g., attaching or detaching objects) in unstructured environments. While Vision-Language-Action (VLA) models offer the potential to master diverse atomic skills, they struggle with the combinatorial complexity of sequencing them and are prone to cascading failures due to environmental sensitivity. To address these challenges, we propose LiLo-VLA (Linked Local VLA), a modular framework capable of zero-shot generalization to novel long-horizon tasks without ever being trained on them. Our approach decouples transport from interaction: a Reaching Module handles global motion, while an Interaction Module employs an object-centric VLA to process isolated objects of interest, ensuring robustness against irrelevant visual features and invariance to spatial configurations. Crucially, this modularity facilitates robust failure recovery through dynamic replanning and skill reuse, effectively mitigating the cascading errors common in end-to-end approaches. We introduce a 21-task simulation benchmark consisting of two challenging suites: LIBERO-Long++ and Ultra-Long. In these simulations, LiLo-VLA achieves a 69% average success rate, outperforming Pi0.5 by 41% and OpenVLA-OFT by 67%. Furthermore, real-world evaluations across 8 long-horizon tasks demonstrate an average success rate of 85%. Project page: https://yy-gx.github.io/LiLo-VLA/.

We present an object-centric approach to empower robots to learn vision-based manipulation skills from human videos. We investigate the problem of imitating robot manipulation from a single human video in the open-world setting, where a robot must learn to manipulate novel objects from one video demonstration. We introduce ORION, an algorithm that tackles the problem by extracting an object-centric manipulation plan from a single RGB-D video and deriving a policy that conditions on the extracted plan. Our method enables the robot to learn from videos captured by daily mobile devices such as an iPad and generalize the policies to deployment environments with varying visual backgrounds, camera angles, spatial layouts, and novel object instances. We systematically evaluate our method on both short-horizon and long-horizon tasks, demonstrating the efficacy of ORION in learning from a single human video in the open world. Videos can be found in the project website https://ut-austin-rpl.github.io/ORION-release.

Robotic manipulation policies often struggle to generalize to novel objects, limiting their real-world utility. In contrast, cognitive science suggests that children develop generalizable dexterous manipulation skills by mastering a small set of simple toys and then applying that knowledge to more complex items. Inspired by this, we study if similar generalization capabilities can also be achieved by robots. Our results indicate robots can learn generalizable grasping using randomly assembled objects that are composed from just four shape primitives: spheres, cuboids, cylinders, and rings. We show that training on these "toys" enables robust generalization to real-world objects, yielding strong zero-shot performance. Crucially, we find the key to this generalization is an object-centric visual representation induced by our proposed detection pooling mechanism. Evaluated in both simulation and on physical robots, our model achieves a 67% real-world grasping success rate on the YCB dataset, outperforming state-of-the-art approaches that rely on substantially more in-domain data. We further study how zero-shot generalization performance scales by varying the number and diversity of training toys and the demonstrations per toy. We believe this work offers a promising path to scalable and generalizable learning in robotic manipulation. Demonstration videos, code, checkpoints and our dataset are available on our project page: https://lego-grasp.github.io/ .

Humanoid robots have the potential to perform dexterous manipulation in human environments, yet acquiring diverse and generalizable skills remains costly due to expensive hardware data collection and labor-intensive annotation. Recent advances in video generative models provide a promising opportunity to synthesize rich manipulation experiences from visual observations, but transferring such imagined behaviors into executable whole-body humanoid skills remains largely unexplored. In this work, we present RoboReact, a framework that automatically synthesizes whole-body humanoid manipulation skills from a single egocentric RGB-D observation. RoboReact generates human manipulation videos, extracts geometry-preserving interaction keyframes through depth-aware 3D reconstruction, and retargets them to high-DoF humanoid platforms while preserving hand-object interaction geometry. To bridge the gap between imagined plans and physical execution, RoboReact performs online object-centric re-grounding and leverages a vision-language model-guided refinement loop to adapt skills under geometric mismatch and execution deviations. The refined skills are executed through a whole-body controller, enabling coordinated whole-body manipulation and dexterous interaction. Experiments on real humanoid robots demonstrate that RoboReact generalizes across diverse object configurations and robustly recovers from execution disturbances without requiring teleoperation or human demonstrations. These results highlight the potential of combining generative models, vision-language reasoning, and closed-loop control for scalable humanoid skill acquisition.

We present Actron3D, a framework that enables robots to acquire transferable 6-DoF manipulation skills from just a few monocular, uncalibrated, RGB-only human videos. At its core lies the Neural Affordance Function, a compact object-centric representation that distills actionable cues from diverse uncalibrated videos-geometry, visual appearance, and affordance-into a lightweight neural network, forming a memory bank of manipulation skills. During deployment, we adopt a pipeline that retrieves relevant affordance functions and transfers precise 6-DoF manipulation policies via coarse-to-fine optimization, enabled by continuous queries to the multimodal features encoded in the neural functions. Experiments in both simulation and the real world demonstrate that Actron3D significantly outperforms prior methods, achieving a 14.9 percentage point improvement in average success rate across 13 tasks while requiring only 2-3 demonstration videos per task.

Learning from demonstration (LfD) has enabled humanoid robots to acquire diverse whole-body skills, but extending this paradigm to human-object interaction (HOI) is limited by the availability of robot-compatible interaction references. We present HOI-Retarget, a contact-centric retargeting method that transfers HOI onto a humanoid robot for large-scale motion-data generation. Its windowed trajectory optimization uses every labeled contact as a target in the object frame, balancing body tracking, foot support and smoothness under the robot's kinematic limits. The method can augment a single demonstration across object sizes, absorb contacts reconstructed from monocular video, and extend to several robots manipulating one object. We publicly release the code and the retargeted motion dataset.

Generalizing from individual skill executions to solving long-horizon tasks remains a core challenge in building autonomous agents. A promising direction is learning high-level, symbolic abstractions of the low-level skills of the agents, enabling reasoning and planning independent of the low-level state space. Among possible high-level representations, object-centric skill abstraction with symbolic predicates has been proven to be efficient because of its compatibility with domain-independent planners. Recent advances in foundation models have made it possible to generate symbolic predicates that operate on raw sensory inputs, a process we call generative predicate invention, to facilitate downstream abstraction learning. However, it remains unclear which formal properties the learned representations must satisfy, and how they can be learned to guarantee these properties. In this paper, we address both questions by presenting a formal theory of generative predicate invention for skill abstraction, resulting in symbolic operators that can be used for provably sound and complete planning. Within this framework, we propose SkillWrapper, a method that leverages foundation models to actively collect robot data and learn human-interpretable, plannable representations of black-box skills, using only RGB image observations. Our extensive empirical evaluation in simulation and on real robots shows that SkillWrapper learns abstract representations that enable solving unseen, long-horizon tasks in the real world with black-box skills.

While end-to-end Vision-Language-Action (VLA) models offer a promising paradigm for robotic manipulation, fine-tuning them on narrow control data often compromises the profound reasoning capabilities inherited from their base Vision-Language Models (VLMs). To resolve this fundamental trade-off, we propose HiVLA, a visual-grounded-centric hierarchical framework that explicitly decouples high-level semantic planning from low-level motor control. In high-level part, a VLM planner first performs task decomposition and visual grounding to generate structured plans, comprising a subtask instruction and a precise target bounding box. Then, to translate this plan into physical actions, we introduce a flow-matching Diffusion Transformer (DiT) action expert in low-level part equipped with a novel cascaded cross-attention mechanism. This design sequentially fuses global context, high-resolution object-centric crops and skill semantics, enabling the DiT to focus purely on robust execution. Our decoupled architecture preserves the VLM's zero-shot reasoning while allowing independent improvement of both components. Extensive experiments in simulation and the real world demonstrate that HiVLA significantly outperforms state-of-the-art end-to-end baselines, particularly excelling in long-horizon skill composition and the fine-grained manipulation of small objects in cluttered scenes.

Manipulating objects to achieve desired goal states is a basic but important skill for dexterous manipulation. Human hand motions demonstrate proficient manipulation capability, providing valuable data for training robots with multi-finger hands. Despite this potential, substantial challenges arise due to the embodiment gap between human and robot hands. In this work, we introduce a hierarchical policy learning framework that uses human hand motion data for training object-centric dexterous robot manipulation. At the core of our method is a high-level trajectory generative model, learned with a large-scale human hand motion capture dataset, to synthesize human-like wrist motions conditioned on the desired object goal states. Guided by the generated wrist motions, deep reinforcement learning is further used to train a low-level finger controller that is grounded in the robot's embodiment to physically interact with the object to achieve the goal. Through extensive evaluation across 10 household objects, our approach not only demonstrates superior performance but also showcases generalization capability to novel object geometries and goal states. Furthermore, we transfer the learned policies from simulation to a real-world bimanual dexterous robot system, further demonstrating its applicability in real-world scenarios. Project website: https://cypypccpy.github.io/obj-dex.github.io/.

Object-centric learning (OCL) seeks to learn representations that only encode an object, isolated from other objects or background cues in a scene. This approach underpins various aims, including out-of-distribution (OOD) generalization, sample-efficient composition, and modeling of structured environments. Most research has focused on developing unsupervised mechanisms that separate objects into discrete slots in the representation space, evaluated using unsupervised object discovery. However, with recent sample-efficient segmentation models, we can separate objects in the pixel space and encode them independently. This achieves remarkable zero-shot performance on OOD object discovery benchmarks, is scalable to foundation models, and can handle a variable number of slots out-of-the-box. Hence, the goal of OCL methods to obtain object-centric representations has been largely achieved. Despite this progress, a key question remains: How does the ability to separate objects within a scene contribute to broader OCL objectives, such as OOD generalization? We address this by investigating the OOD generalization challenge caused by spurious background cues through the lens of OCL. We propose a novel, training-free probe called Object-Centric Classification with Applied Masks (OCCAM), demonstrating that segmentation-based encoding of individual objects significantly outperforms slot-based OCL methods. However, challenges in real-world applications remain. We provide the toolbox for the OCL community to use scalable object-centric representations, and focus on practical applications and fundamental questions, such as understanding object perception in human cognition. Our code is available https://github.com/AlexanderRubinstein/OCCAM{here}.

Human manipulation videos are a convenient and intuitive source for robot learning. However, directly transferring human dexterity to robots remains challenging due to perception errors and embodiment gap. To address this, we introduce Video2Sim2Real, a full-stack framework for autonomous skill acquisition from a single human manipulation video. Our framework first uses off-the-shelf foundation models to reconstruct a simulator-ready digital twin and extract robot and object motion priors. Rather than treating the extracted robot motion as a reliable reference throughout execution, our key idea is to recover and leverage the most fundamental sources of supervision from the demonstrated skill: We identify object-centric keyframes to optimize the corresponding robot configurations using object information from the simulator, and use these configurations as anchors that refine the robot motion such that it ultimately has the desired impact on the environment. To bridge the remaining sim-to-real gap, we introduce a sim-to-real strategy that decouples robustness to noisy and incomplete perception from variations in hand-object interaction dynamics. Specifically, we learn to recalibrate robot configurations from noisy real-world point clouds via IL, and leverage residual RL to perform local finger-level adaptations to ensure for robust and effective interactions. Finally, a collision-aware motion planning module enables spatial generalization to novel object configurations. Across several everyday manipulation tasks, Video2Sim2Real improves simulated task success, safety, and trajectory coherence over numerous baselines, and achieves better sim-to-real transfer than existing techniques. These results demonstrate a promising path toward autonomous dexterous skill acquisition from human videos.

Object-centric learning (OCL) aspires general and compositional understanding of scenes by representing a scene as a collection of object-centric representations. OCL has also been extended to multi-view image and video datasets to apply various data-driven inductive biases by utilizing geometric or temporal information in the multi-image data. Single-view images carry less information about how to disentangle a given scene than videos or multi-view images do. Hence, owing to the difficulty of applying inductive biases, OCL for single-view images remains challenging, resulting in inconsistent learning of object-centric representation. To this end, we introduce a novel OCL framework for single-view images, SLot Attention via SHepherding (SLASH), which consists of two simple-yet-effective modules on top of Slot Attention. The new modules, Attention Refining Kernel (ARK) and Intermediate Point Predictor and Encoder (IPPE), respectively, prevent slots from being distracted by the background noise and indicate locations for slots to focus on to facilitate learning of object-centric representation. We also propose a weak semi-supervision approach for OCL, whilst our proposed framework can be used without any assistant annotation during the inference. Experiments show that our proposed method enables consistent learning of object-centric representation and achieves strong performance across four datasets. Code is available at https://github.com/object-understanding/SLASH.

Understanding the world in terms of objects and the possible interplays with them is an important cognition ability, especially in robotics manipulation, where many tasks require robot-object interactions. However, learning such a structured world model, which specifically captures entities and relationships, remains a challenging and underexplored problem. To address this, we propose FOCUS, a model-based agent that learns an object-centric world model. Thanks to a novel exploration bonus that stems from the object-centric representation, FOCUS can be deployed on robotics manipulation tasks to explore object interactions more easily. Evaluating our approach on manipulation tasks across different settings, we show that object-centric world models allow the agent to solve tasks more efficiently and enable consistent exploration of robot-object interactions. Using a Franka Emika robot arm, we also showcase how FOCUS could be adopted in real-world settings.

Pre-trained vision models (PVMs) are fundamental to modern robotics, yet their optimal configuration remains unclear. Through systematic evaluation, we find that while DINO and iBOT outperform MAE across visuomotor control and perception tasks, they struggle when trained on non-(single-)object-centric (NOC) data--a limitation strongly correlated with their diminished ability to learn object-centric representations. This investigation indicates that the ability to form object-centric representations from the non-object-centric robotics dataset is the key to success for PVMs. Motivated by this discovery, we designed SlotMIM, a method that induces object-centric representations by introducing a semantic bottleneck to reduce the number of prototypes to encourage the emergence of objectness as well as cross-view consistency regularization for encouraging multiview invariance. Our experiments encompass pre-training on object-centric, scene-centric, web-crawled, and ego-centric data. Across all settings, our approach learns transferrable representations and achieves significant improvements over prior work in image recognition, scene understanding, and robot learning evaluations. When scaled up with million-scale datasets, our method also demonstrates superior data efficiency and scalability. Our code and models are publicly available at https://github.com/CVMI-Lab/SlotMIM.

Robotic manipulation policies rely on pre-trained vision models that give either a global scene embedding or a dense patch grid. Both mix task-relevant and task-irrelevant features. Object-centric slot representations are a structured alternative: they group features into a few per-object slots. We test what this structure buys on ManiSkill3 PickCube-v1, with a frozen encoder and a held-out-seed evaluation. Holding the policy, goal token, rendering, and calibration fixed and changing only the encoder, a frozen object-centric SPOT representation (DINO ViT-B/16 + Slot Attention) reaches 55.0pm2.9% success, 22.4% above a dense DINO global-feature baseline (32.6 pm 1.5%), with the same trainable policy and no encoder fine-tuning. More tokens alone do not help: a dense patch grid with 16x the tokens performs no better than the global feature. Adding an explicit 2D spatial goal and native-resolution rendering raises the full system to 68.7pm4.2%, just below a privileged 3D-oracle upper bound (71.7pm4.1%). An automated kinematic failure taxonomy then separates spatial-precision (Near-Miss) failures from object-tracking (No-Grasp) failures: spatial grounding reduces Near-Miss while leaving No- Grasp unchanged. The same taxonomy transfers to the harder StackCube-v1 and points to occlusion as the main bottleneck.

Object-centric (OC) representations, which represent the state of a visual scene by modeling it as a composition of objects, have the potential to be used in various downstream tasks to achieve systematic compositional generalization and facilitate reasoning. However, these claims have not been thoroughly analyzed yet. Recently, foundation models have demonstrated unparalleled capabilities across diverse domains from language to computer vision, marking them as a potential cornerstone of future research for a multitude of computational tasks. In this paper, we conduct an extensive empirical study on representation learning for downstream Visual Question Answering (VQA), which requires an accurate compositional understanding of the scene. We thoroughly investigate the benefits and trade-offs of OC models and alternative approaches including large pre-trained foundation models on both synthetic and real-world data, and demonstrate a viable way to achieve the best of both worlds. The extensiveness of our study, encompassing over 600 downstream VQA models and 15 different types of upstream representations, also provides several additional insights that we believe will be of interest to the community at large.

Visual representations are central to the learning and generalization capabilities of robotic manipulation policies. While existing methods rely on global or dense features, such representations often entangle task-relevant and irrelevant scene information, limiting robustness under distribution shifts. In this work, we investigate object-centric representations (OCR) as a structured alternative that segments visual input into a finished set of entities, introducing inductive biases that align more naturally with manipulation tasks. We benchmark a range of visual encoders-object-centric, global and dense methods-across a suite of simulated and real-world manipulation tasks ranging from simple to complex, and evaluate their generalization under diverse visual conditions including changes in lighting, texture, and the presence of distractors. Our findings reveal that OCR-based policies outperform dense and global representations in generalization settings, even without task-specific pretraining. These insights suggest that OCR is a promising direction for designing visual systems that generalize effectively in dynamic, real-world robotic environments.

The intimate entanglement between objects affordances and human poses is of large interest, among others, for behavioural sciences, cognitive psychology, and Computer Vision communities. In recent years, the latter has developed several object-centric approaches: starting from items, learning pipelines synthesizing human poses and dynamics in a realistic way, satisfying both geometrical and functional expectations. However, the inverse perspective is significantly less explored: Can we infer 3D objects and their poses from human interactions alone? Our investigation follows this direction, showing that a generic 3D human point cloud is enough to pop up an unobserved object, even when the user is just imitating a functionality (e.g., looking through a binocular) without involving a tangible counterpart. We validate our method qualitatively and quantitatively, with synthetic data and sequences acquired for the task, showing applicability for XR/VR. The code is available at https://github.com/ptrvilya/object-popup.

Learning compositional representation is a key aspect of object-centric learning as it enables flexible systematic generalization and supports complex visual reasoning. However, most of the existing approaches rely on auto-encoding objective, while the compositionality is implicitly imposed by the architectural or algorithmic bias in the encoder. This misalignment between auto-encoding objective and learning compositionality often results in failure of capturing meaningful object representations. In this study, we propose a novel objective that explicitly encourages compositionality of the representations. Built upon the existing object-centric learning framework (e.g., slot attention), our method incorporates additional constraints that an arbitrary mixture of object representations from two images should be valid by maximizing the likelihood of the composite data. We demonstrate that incorporating our objective to the existing framework consistently improves the objective-centric learning and enhances the robustness to the architectural choices.

While skill-centric approaches leverage foundation models to enhance generalization in compositional tasks, they often rely on fixed skill libraries, limiting adaptability to new tasks without manual intervention. To address this, we propose Uni-Skill, a Unified Skill-centric framework that supports skill-aware planning and facilitates automatic skill evolution. Unlike prior methods that restrict planning to predefined skills, Uni-Skill requests for new skill implementations when existing ones are insufficient, ensuring adaptable planning with self-augmented skill library. To support automatic implementation of diverse skills requested by the planning module, we construct SkillFolder, a VerbNet-inspired repository derived from large-scale unstructured robotic videos. SkillFolder introduces a hierarchical skill taxonomy that captures diverse skill descriptions at multiple levels of abstraction. By populating this taxonomy with large-scale, automatically annotated demonstrations, Uni-Skill shifts the paradigm of skill acquisition from inefficient manual annotation to efficient offline structural retrieval. Retrieved examples provide semantic supervision over behavior patterns and fine-grained references for spatial trajectories, enabling few-shot skill inference without deployment-time demonstrations. Comprehensive experiments in both simulation and real-world settings verify the state-of-the-art performance of Uni-Skill over existing VLM-based skill-centric approaches, highlighting its advanced reasoning capabilities and strong zero-shot generalization across a wide range of novel tasks.

The goal of object-centric representation learning is to decompose visual scenes into a structured representation that isolates the entities. Recent successes have shown that object-centric representation learning can be scaled to real-world scenes by utilizing pre-trained self-supervised features. However, so far, object-centric methods have mostly been applied in-distribution, with models trained and evaluated on the same dataset. This is in contrast to the wider trend in machine learning towards general-purpose models directly applicable to unseen data and tasks. Thus, in this work, we study current object-centric methods through the lens of zero-shot generalization by introducing a benchmark comprising eight different synthetic and real-world datasets. We analyze the factors influencing zero-shot performance and find that training on diverse real-world images improves transferability to unseen scenarios. Furthermore, inspired by the success of task-specific fine-tuning in foundation models, we introduce a novel fine-tuning strategy to adapt pre-trained vision encoders for the task of object discovery. We find that the proposed approach results in state-of-the-art performance for unsupervised object discovery, exhibiting strong zero-shot transfer to unseen datasets.

Humans possess the cognitive ability to comprehend scenes in a compositional manner. To empower AI systems with similar abilities, object-centric representation learning aims to acquire representations of individual objects from visual scenes without any supervision. Although recent advancements in object-centric representation learning have achieved remarkable progress on complex synthesis datasets, there is a huge challenge for application in complex real-world scenes. One of the essential reasons is the scarcity of real-world datasets specifically tailored to object-centric representation learning methods. To solve this problem, we propose a versatile real-world dataset of tabletop scenes for object-centric learning called OCTScenes, which is meticulously designed to serve as a benchmark for comparing, evaluating and analyzing object-centric representation learning methods. OCTScenes contains 5000 tabletop scenes with a total of 15 everyday objects. Each scene is captured in 60 frames covering a 360-degree perspective. Consequently, OCTScenes is a versatile benchmark dataset that can simultaneously satisfy the evaluation of object-centric representation learning methods across static scenes, dynamic scenes, and multi-view scenes tasks. Extensive experiments of object-centric representation learning methods for static, dynamic and multi-view scenes are conducted on OCTScenes. The results demonstrate the shortcomings of state-of-the-art methods for learning meaningful representations from real-world data, despite their impressive performance on complex synthesis datasets. Furthermore, OCTScenes can serves as a catalyst for advancing existing state-of-the-art methods, inspiring them to adapt to real-world scenes. Dataset and code are available at https://huggingface.co/datasets/Yinxuan/OCTScenes.

Visual foundation models provide strong perceptual features for robotics, but their dense representations lack explicit object-level structure, limiting robustness and contractility in manipulation tasks. We propose STORM (Slot-based Task-aware Object-centric Representation for robotic Manipulation), a lightweight object-centric adaptation module that augments frozen visual foundation models with a small set of semantic-aware slots for robotic manipulation. Rather than retraining large backbones, STORM employs a multi-phase training strategy: object-centric slots are first stabilized through visual--semantic pretraining using language embeddings, then jointly adapted with a downstream manipulation policy. This staged learning prevents degenerate slot formation and preserves semantic consistency while aligning perception with task objectives. Experiments on object discovery benchmarks and simulated manipulation tasks show that STORM improves generalization to visual distractors, and control performance compared to directly using frozen foundation model features or training object-centric representations end-to-end. Our results highlight multi-phase adaptation as an efficient mechanism for transforming generic foundation model features into task-aware object-centric representations for robotic control.

Object-centric learning aims to break down complex visual scenes into more manageable object representations, enhancing the understanding and reasoning abilities of machine learning systems toward the physical world. Recently, slot-based video models have demonstrated remarkable proficiency in segmenting and tracking objects, but they overlook the importance of the effective reasoning module. In the real world, reasoning and predictive abilities play a crucial role in human perception and object tracking; in particular, these abilities are closely related to human intuitive physics. Inspired by this, we designed a novel reasoning module called the Slot-based Time-Space Transformer with Memory buffer (STATM) to enhance the model's perception ability in complex scenes. The memory buffer primarily serves as storage for slot information from upstream modules, the Slot-based Time-Space Transformer makes predictions through slot-based spatiotemporal attention computations and fusion. Our experimental results on various datasets indicate that the STATM module can significantly enhance the capabilities of multiple state-of-the-art object-centric learning models for video. Moreover, as a predictive model, the STATM module also performs well in downstream prediction and Visual Question Answering (VQA) tasks. We will release our codes and data at https://github.com/intell-sci-comput/STATM.

Reusable skills are a key mechanism for extending agent capabilities, allowing agents to accumulate experience and solve increasingly complex tasks. Yet most existing skill-learning methods store reusable experience as text-only assets, such as instructions, reasoning traces, or summarized trajectories. We argue that this text-only paradigm creates a fundamental bottleneck for visual-centric tasks, where reusable knowledge often depends on spatial layout, visual grounding, fine-grained appearance, and localized state changes. To address this limitation, we propose \NAME, a multimodal skill paradigm that combines declarative textual logic with explicit visual support. We distinguish three reusable forms: static priors for stable spatial conventions, dynamic priors for in-situ visual working memory, and interleaved visual skills that bind ordered text steps to the source frames, screenshots, or page regions that justify them. Rather than only describing what to do, visual skills also encode where to look, how to inspect, and how to verify visual outcomes. To scale visual-skill construction, we introduce \SYSTEM, an automatic system that converts agent experience into reusable multimodal skills by preserving textual reasoning, spatial references, visual boundaries, and interaction patterns from task trajectories. Experiments on GUI and other visual-centric tasks show that visual skills consistently outperform text-only skills, particularly when success requires spatial correspondence, visual evidence, and state-aware interaction. These results support our central position: reusable agent skills should go beyond text and become multimodal assets for future multimodal agents.

Recent research has evidenced the significant potentials of Large Language Models (LLMs) in handling challenging tasks within 3D scenes. However, current models are constrained to addressing object-centric tasks, where each question-answer pair focuses solely on an individual object. In real-world applications, users may pose queries involving multiple objects or expect for answers that precisely reference various objects. We introduce the use of object identifiers to freely reference objects during a conversation. While this solution appears straightforward, it presents two main challenges: 1) How to establish a reliable one-to-one correspondence between each object and its identifier? 2) How to incorporate complex spatial relationships among dozens of objects into the embedding space of the LLM? To address these challenges, we propose a two-stage alignment method, which involves learning an attribute-aware token and a relation-aware token for each object. These tokens capture the object's attributes and spatial relationships with surrounding objects in the 3D scene. Once the alignment is established, we can fine-tune our model on various downstream tasks using instruction tuning. Experiments conducted on traditional datasets like ScanQA, ScanRefer, and Nr3D/Sr3D showcase the effectiveness of our proposed method. Additionally, we create a 3D scene captioning dataset annotated with rich object identifiers, with the assistant of GPT-4. This dataset aims to further explore the capability of object identifiers in effective object referencing and precise scene understanding.

Procedural activities are fundamentally driven by object state transitions, yet existing instructional video benchmarks remain action-centric and cannot evaluate whether models reason about how objects evolve toward task completion. In this work, we introduce ProcObject-10K, the first benchmark that jointly evaluates object-centric reasoning and temporal evidence grounding in instructional videos, across both egocentric and exocentric views. It comprises 10,522 open-ended VideoQA pairs grounded in 1,799 video clips, spanning 137 tasks across 9 domains and five reasoning types covering preconditions, state evolution, counterfactuals, mistakes, and readiness. Benchmarking 13 leading MLLMs reveals a substantial answering-grounding gap: models produce plausible answers while failing to localize the supporting evidence (mIoU < 45%), exposing their reliance on linguistic priors rather than fine-grained object dynamics. As a step toward closing this gap, we further provide an object-centric supervised fine-tuning baseline with pseudo object-level supervision and spatial-temporal constraints. Models fine-tuned on ProcObject-10K not only improve on the benchmark itself, but also transfer effectively to other grounded VideoQA and embodied planning tasks. The dataset, annotations, and evaluation toolkit will be publicly released to support future research on object-centric procedural understanding.

Object-centric reconstruction seeks to recover the 3D structure of a scene through composition of independent objects. While this independence can simplify modeling, it discards strong signals that could improve reconstruction, notably repetition where the same object model is seen multiple times in a scene, or across scans. We propose the Joint Reconstruction Model (JRM) to leverage repetition by framing object reconstruction as one of personalized generation: multiple observations share a common subject that should be consistent for all observations, while still adhering to the specific pose and state from each. Prior methods in this direction rely on explicit matching and rigid alignment across observations, making them sensitive to errors and difficult to extend to non-rigid transformations. In contrast, JRM is a 3D flow-matching generative model that implicitly aggregates unaligned observations in its latent space, learning to produce consistent and faithful reconstructions in a data-driven manner without explicit constraints. Evaluations on synthetic and real-world data show that JRM's implicit aggregation removes the need for explicit alignment, improves robustness to incorrect associations, and naturally handles non-rigid changes such as articulation. Overall, JRM outperforms both independent and alignment-based baselines in reconstruction quality.

Developing deep learning models that effectively learn object-centric representations, akin to human cognition, remains a challenging task. Existing approaches facilitate object discovery by representing objects as fixed-size vectors, called ``slots'' or ``object files''. While these approaches have shown promise in certain scenarios, they still exhibit certain limitations. First, they rely on architectural priors which can be unreliable and usually require meticulous engineering to identify the correct objects. Second, there has been a notable gap in investigating the practical utility of these representations in downstream tasks. To address the first limitation, we introduce a method that explicitly optimizes the constraint that each object in a scene should be associated with a distinct slot. We formalize this constraint by introducing consistency objectives which are cyclic in nature. By integrating these consistency objectives into various existing slot-based object-centric methods, we showcase substantial improvements in object-discovery performance. These enhancements consistently hold true across both synthetic and real-world scenes, underscoring the effectiveness and adaptability of the proposed approach. To tackle the second limitation, we apply the learned object-centric representations from the proposed method to two downstream reinforcement learning tasks, demonstrating considerable performance enhancements compared to conventional slot-based and monolithic representation learning methods. Our results suggest that the proposed approach not only improves object discovery, but also provides richer features for downstream tasks.

Perceiving visual scenes as objects and background -- like humans do -- Object-Centric Learning (OCL) aggregates image or video feature maps into object-level feature vectors, termed slots. OCL's self-supervision of reconstructing the input from these aggregated slots struggles with complex object textures, thus Vision Foundation Model (VFM) representations are used as the aggregation input and reconstruction target. However, existing methods leverage VFM representations in diverse ways and often fail to fully exploit their potential. In response, we propose a clean architecture -- Vector-Quantized VFMs for OCL (VQ-VFM-OCL, or VVO) -- that unifies mainstream OCL methods. The key to our unification is simple yet effective, just shared quantizing the same VFM representation as the reconstruction target. Through mathematical modeling and statistical verification, we further analyze why VFM representations facilitate OCL aggregation and how their shared quantization as reconstruction targets strengthens OCL supervision. Experiments show that across different VFMs, aggregators and decoders, our VVO consistently outperforms baselines in object discovery and recognition, as well as downstream visual prediction and reasoning. The source code is available in supplemental files.

The ability to distill object-centric abstractions from intricate visual scenes underpins human-level generalization. Despite the significant progress in object-centric learning methods, learning object-centric representations in the 3D physical world remains a crucial challenge. In this work, we propose SlotLifter, a novel object-centric radiance model addressing scene reconstruction and decomposition jointly via slot-guided feature lifting. Such a design unites object-centric learning representations and image-based rendering methods, offering state-of-the-art performance in scene decomposition and novel-view synthesis on four challenging synthetic and four complex real-world datasets, outperforming existing 3D object-centric learning methods by a large margin. Through extensive ablative studies, we showcase the efficacy of designs in SlotLifter, revealing key insights for potential future directions.

Existing policy learning methods predominantly adopt the task-centric paradigm, necessitating the collection of task data in an end-to-end manner. Consequently, the learned policy tends to fail to tackle novel tasks. Moreover, it is hard to localize the errors for a complex task with multiple stages due to end-to-end learning. To address these challenges, we propose RoboMatrix, a skill-centric and hierarchical framework for scalable task planning and execution. We first introduce a novel skill-centric paradigm that extracts the common meta-skills from different complex tasks. This allows for the capture of embodied demonstrations through a kill-centric approach, enabling the completion of open-world tasks by combining learned meta-skills. To fully leverage meta-skills, we further develop a hierarchical framework that decouples complex robot tasks into three interconnected layers: (1) a high-level modular scheduling layer; (2) a middle-level skill layer; and (3) a low-level hardware layer. Experimental results illustrate that our skill-centric and hierarchical framework achieves remarkable generalization performance across novel objects, scenes, tasks, and embodiments. This framework offers a novel solution for robot task planning and execution in open-world scenarios. Our software and hardware are available at https://github.com/WayneMao/RoboMatrix.

Recent Vision-Language-Action (VLA) models have made impressive progress toward general-purpose robotic manipulation by post-training large Vision-Language Models (VLMs) for action prediction. Yet most VLAs entangle perception and control in a monolithic pipeline optimized purely for action, which can erode language-conditioned grounding. In our real-world tabletop tests, policies over-grasp when the target is absent, are distracted by clutter, and overfit to background appearance. To address these issues, we propose OBEYED-VLA (OBject-centric and gEometrY groundED VLA), a framework that explicitly disentangles perceptual grounding from action reasoning. Instead of operating directly on raw RGB, OBEYED-VLA augments VLAs with a perception module that grounds multi-view inputs into task-conditioned, object-centric, and geometry-aware observations. This module includes a VLM-based object-centric grounding stage that selects task-relevant object regions across camera views, along with a complementary geometric grounding stage that emphasizes the 3D structure of these objects over their appearance. The resulting grounded views are then fed to a pretrained VLA policy, which we fine-tune exclusively on single-object demonstrations collected without environmental clutter or non-target objects. On a real-world UR10e tabletop setup, OBEYED-VLA substantially improves robustness over strong VLA baselines across four challenging regimes and multiple difficulty levels: distractor objects, absent-target rejection, background appearance changes, and cluttered manipulation of unseen objects. Ablation studies confirm that both semantic grounding and geometry-aware grounding are critical to these gains. Overall, the results indicate that making perception an explicit, object-centric component is an effective way to strengthen and generalize VLA-based robotic manipulation.

Learning structured representations of the visual world in terms of objects promises to significantly improve the generalization abilities of current machine learning models. While recent efforts to this end have shown promising empirical progress, a theoretical account of when unsupervised object-centric representation learning is possible is still lacking. Consequently, understanding the reasons for the success of existing object-centric methods as well as designing new theoretically grounded methods remains challenging. In the present work, we analyze when object-centric representations can provably be learned without supervision. To this end, we first introduce two assumptions on the generative process for scenes comprised of several objects, which we call compositionality and irreducibility. Under this generative process, we prove that the ground-truth object representations can be identified by an invertible and compositional inference model, even in the presence of dependencies between objects. We empirically validate our results through experiments on synthetic data. Finally, we provide evidence that our theory holds predictive power for existing object-centric models by showing a close correspondence between models' compositionality and invertibility and their empirical identifiability.

3D object segmentation with Large Language Models (LLMs) has become a prevailing paradigm due to its broad semantics, task flexibility, and strong generalization. However, this paradigm is hindered by representation misalignment: LLMs process high-level semantic tokens, whereas 3D point clouds convey only dense geometric structures. In prior methods, misalignment limits both input and output. At the input stage, dense point patches require heavy pre-alignment, weakening object-level semantics and confusing similar distractors. At the output stage, predictions depend only on dense features without explicit geometric cues, leading to a loss of fine-grained accuracy. To address these limitations, we present the Point Linguist Model (PLM), a general framework that bridges the representation gap between LLMs and dense 3D point clouds without requiring large-scale pre-alignment between 3D-text or 3D-images. Specifically, we introduce Object-centric Discriminative Representation (OcDR), which learns object-centric tokens that capture target semantics and scene relations under a hard negative-aware training objective. This mitigates the misalignment between LLM tokens and 3D points, enhances resilience to distractors, and facilitates semantic-level reasoning within LLMs. For accurate segmentation, we introduce the Geometric Reactivation Decoder (GRD), which predicts masks by combining OcDR tokens carrying LLM-inferred geometry with corresponding dense features, preserving comprehensive dense features throughout the pipeline. Extensive experiments show that PLM achieves significant improvements of +7.3 mIoU on ScanNetv2 and +6.0 mIoU on Multi3DRefer for 3D referring segmentation, with consistent gains across 7 benchmarks spanning 4 different tasks, demonstrating the effectiveness of comprehensive object-centric reasoning for robust 3D understanding.

World models require robust relational understanding to support prediction, reasoning, and control. While object-centric representations provide a useful abstraction, they are not sufficient to capture interaction-dependent dynamics. We therefore propose C-JEPA, a simple and flexible object-centric world model that extends masked joint embedding prediction from image patches to object-centric representations. By applying object-level masking that requires an object's state to be inferred from other objects, C-JEPA induces latent interventions with counterfactual-like effects and prevents shortcut solutions, making interaction reasoning essential. Empirically, C-JEPA leads to consistent gains in visual question answering, with an absolute improvement of about 20\% in counterfactual reasoning compared to the same architecture without object-level masking. On agent control tasks, C-JEPA enables substantially more efficient planning by using only 1\% of the total latent input features required by patch-based world models, while achieving comparable performance. Finally, we provide a formal analysis demonstrating that object-level masking induces a causal inductive bias via latent interventions. Our code is available at https://github.com/galilai-group/cjepa.

Unsupervised object-centric learning methods allow the partitioning of scenes into entities without additional localization information and are excellent candidates for reducing the annotation burden of multiple-object tracking (MOT) pipelines. Unfortunately, they lack two key properties: objects are often split into parts and are not consistently tracked over time. In fact, state-of-the-art models achieve pixel-level accuracy and temporal consistency by relying on supervised object detection with additional ID labels for the association through time. This paper proposes a video object-centric model for MOT. It consists of an index-merge module that adapts the object-centric slots into detection outputs and an object memory module that builds complete object prototypes to handle occlusions. Benefited from object-centric learning, we only require sparse detection labels (0%-6.25%) for object localization and feature binding. Relying on our self-supervised Expectation-Maximization-inspired loss for object association, our approach requires no ID labels. Our experiments significantly narrow the gap between the existing object-centric model and the fully supervised state-of-the-art and outperform several unsupervised trackers.

Manipulation behaviors vary widely across objects and scenes, but they share a small set of reusable skills, and planning with these skills helps embodied agents generalize to new tasks. Yet an agent can only plan with skills it knows. Recovering skills from observed experience, the inverse of planning, builds this knowledge over time and yields skill data for training future agents. Vision-Language Models (VLMs) describe individual manipulation events well, but can they organize a stream of events into reusable skills? We formulate this problem as Streaming Embodied Skill Discovery (SESD): a model watches videos in sequence and maintains a persistent skill library that shapes its later decisions. To systematically measure this ability, we introduce Video2Skill, a benchmark that covers robot tabletop manipulation and human kitchen activity and tests three core capabilities: (i) locating manipulation events in time, (ii) grouping events of the same transformation, and (iii) deciding when to reuse an existing skill or create a new one. Across 19 open-source VLMs, many models group events at near-chance level, and scale does not consistently help. Their errors depend on how perception and library updates are coupled: joint models merge distinct transformations into one skill, while models that update the library from text descriptions duplicate recurring ones. Supervised fine-tuning, including our counterfactual library-state rebalancing (CLaRe), improves grouping but exposes a deeper bottleneck: trained models consolidate familiar skills yet rarely expand the library. Their libraries stall below half the reference size, and transformations unseen in training are located in time but almost never given a new skill. Recognizing when existing skills are insufficient thus emerges as the central challenge.

The extraction of modular object-centric representations for downstream tasks is an emerging area of research. Learning grounded representations of objects that are guaranteed to be stable and invariant promises robust performance across different tasks and environments. Slot Attention (SA) learns object-centric representations by assigning objects to slots, but presupposes a single distribution from which all slots are randomly initialised. This results in an inability to learn specialized slots which bind to specific object types and remain invariant to identity-preserving changes in object appearance. To address this, we present \textsc{Conditional Slot Attention} (CoSA) using a novel concept of Grounded Slot Dictionary (GSD) inspired by vector quantization. Our proposed GSD comprises (i) canonical object-level property vectors and (ii) parametric Gaussian distributions, which define a prior over the slots. We demonstrate the benefits of our method in multiple downstream tasks such as scene generation, composition, and task adaptation, whilst remaining competitive with SA in popular object discovery benchmarks.

The pre-training of visual representations has enhanced the efficiency of robot learning. Due to the lack of large-scale in-domain robotic datasets, prior works utilize in-the-wild human videos to pre-train robotic visual representation. Despite their promising results, representations from human videos are inevitably subject to distribution shifts and lack the dynamics information crucial for task completion. We first evaluate various pre-trained representations in terms of their correlation to the downstream robotic manipulation tasks (i.e., manipulation centricity). Interestingly, we find that the "manipulation centricity" is a strong indicator of success rates when applied to downstream tasks. Drawing from these findings, we propose Manipulation Centric Representation (MCR), a foundation representation learning framework capturing both visual features and the dynamics information such as actions and proprioceptions of manipulation tasks to improve manipulation centricity. Specifically, we pre-train a visual encoder on the DROID robotic dataset and leverage motion-relevant data such as robot proprioceptive states and actions. We introduce a novel contrastive loss that aligns visual observations with the robot's proprioceptive state-action dynamics, combined with a behavior cloning (BC)-like actor loss to predict actions during pre-training, along with a time contrastive loss. Empirical results across 4 simulation domains with 20 tasks verify that MCR outperforms the strongest baseline method by 14.8%. Moreover, MCR boosts the performance of data-efficient learning with a UR5e arm on 3 real-world tasks by 76.9%. Project website: https://robots-pretrain-robots.github.io/.

The choice of representation plays a key role in self-driving. Bird's eye view (BEV) representations have shown remarkable performance in recent years. In this paper, we propose to learn object-centric representations in BEV to distill a complex scene into more actionable information for self-driving. We first learn to place objects into slots with a slot attention model on BEV sequences. Based on these object-centric representations, we then train a transformer to learn to drive as well as reason about the future of other vehicles. We found that object-centric slot representations outperform both scene-level and object-level approaches that use the exact attributes of objects. Slot representations naturally incorporate information about objects from their spatial and temporal context such as position, heading, and speed without explicitly providing it. Our model with slots achieves an increased completion rate of the provided routes and, consequently, a higher driving score, with a lower variance across multiple runs, affirming slots as a reliable alternative in object-centric approaches. Additionally, we validate our model's performance as a world model through forecasting experiments, demonstrating its capability to predict future slot representations accurately. The code and the pre-trained models can be found at https://kuis-ai.github.io/CarFormer/.

The ability to perceive and reason about individual objects and their interactions is a goal to be achieved for building intelligent artificial systems. State-of-the-art approaches use a feedforward encoder to extract object embeddings and a latent graph neural network to model the interaction between these object embeddings. However, the feedforward encoder can not extract {\it object-centric} representations, nor can it disentangle multiple objects with similar appearance. To solve these issues, we introduce {\it Slot Structured World Models} (SSWM), a class of world models that combines an {\it object-centric} encoder (based on Slot Attention) with a latent graph-based dynamics model. We evaluate our method in the Spriteworld benchmark with simple rules of physical interaction, where Slot Structured World Models consistently outperform baselines on a range of (multi-step) prediction tasks with action-conditional object interactions. All code to reproduce paper experiments is available from https://github.com/JonathanCollu/Slot-Structured-World-Models.

Learning object-centric scene representations is essential for attaining structural understanding and abstraction of complex scenes. Yet, as current approaches for unsupervised object-centric representation learning are built upon either a stationary observer assumption or a static scene assumption, they often: i) suffer single-view spatial ambiguities, or ii) infer incorrectly or inaccurately object representations from dynamic scenes. To address this, we propose Dynamics-aware Multi-Object Network (DyMON), a method that broadens the scope of multi-view object-centric representation learning to dynamic scenes. We train DyMON on multi-view-dynamic-scene data and show that DyMON learns -- without supervision -- to factorize the entangled effects of observer motions and scene object dynamics from a sequence of observations, and constructs scene object spatial representations suitable for rendering at arbitrary times (querying across time) and from arbitrary viewpoints (querying across space). We also show that the factorized scene representations (w.r.t. objects) support querying about a single object by space and time independently.

Unsupervised object-centric learning aims to decompose scenes into interpretable object entities, termed slots. Slot-based auto-encoders stand out as a prominent method for this task. Within them, crucial aspects include guiding the encoder to generate object-specific slots and ensuring the decoder utilizes them during reconstruction. This work introduces two novel techniques, (i) an attention-based self-training approach, which distills superior slot-based attention masks from the decoder to the encoder, enhancing object segmentation, and (ii) an innovative patch-order permutation strategy for autoregressive transformers that strengthens the role of slot vectors in reconstruction. The effectiveness of these strategies is showcased experimentally. The combined approach significantly surpasses prior slot-based autoencoder methods in unsupervised object segmentation, especially with complex real-world images. We provide the implementation code at https://github.com/gkakogeorgiou/spot .

We introduce the ObjectFolder Benchmark, a benchmark suite of 10 tasks for multisensory object-centric learning, centered around object recognition, reconstruction, and manipulation with sight, sound, and touch. We also introduce the ObjectFolder Real dataset, including the multisensory measurements for 100 real-world household objects, building upon a newly designed pipeline for collecting the 3D meshes, videos, impact sounds, and tactile readings of real-world objects. We conduct systematic benchmarking on both the 1,000 multisensory neural objects from ObjectFolder, and the real multisensory data from ObjectFolder Real. Our results demonstrate the importance of multisensory perception and reveal the respective roles of vision, audio, and touch for different object-centric learning tasks. By publicly releasing our dataset and benchmark suite, we hope to catalyze and enable new research in multisensory object-centric learning in computer vision, robotics, and beyond. Project page: https://objectfolder.stanford.edu

Humans can effortlessly anticipate how objects might move or change through interaction--imagining a cup being lifted, a knife slicing, or a lid being closed. We aim to endow computational systems with a similar ability to predict plausible future object motions directly from passive visual observation. We introduce ObjectForesight, a 3D object-centric dynamics model that predicts future 6-DoF poses and trajectories of rigid objects from short egocentric video sequences. Unlike conventional world or dynamics models that operate in pixel or latent space, ObjectForesight represents the world explicitly in 3D at the object level, enabling geometrically grounded and temporally coherent predictions that capture object affordances and trajectories. To train such a model at scale, we leverage recent advances in segmentation, mesh reconstruction, and 3D pose estimation to curate a dataset of 2 million plus short clips with pseudo-ground-truth 3D object trajectories. Through extensive experiments, we show that ObjectForesight achieves significant gains in accuracy, geometric consistency, and generalization to unseen objects and scenes, establishing a scalable framework for learning physically grounded, object-centric dynamics models directly from observation. objectforesight.github.io

Object-centric representations promise a key property for few-shot learning: Rather than treating a scene as a single unit, a model can decompose it into individual object-level parts that can be matched and compared across different concepts. In practice, this potential is rarely realized. Continual learners either collapse scenes into global embeddings, or train with part-level matching objectives that tie representations too closely to seen patterns, leaving them unable to generalize to truly novel concepts. In this paper, we identify this fundamental structural conflict and pioneer a new paradigm that strictly decouples representation learning from compositional inference. Leveraging the inherent patch-level semantic geometry of self-supervised Vision Transformers (ViTs), our framework employs a dual-phase strategy. During training, slot representations are optimized entirely toward holistic class identity, preserving highly generalizable, object-level geometries. At inference, preserved slots are dynamically composed to match novel scenes. We demonstrate that this paradigm offers dual structural benefits: The frozen backbone naturally prevents representation drift, while our lightweight, holistic optimization preserves the features' capacity for novel-concept transfer. Extensive experiments validate this approach, achieving state-of-the-art unseen-concept generalization and minimal forgetting across standard continual learning benchmarks.

Recent self-supervised learning (SSL) models trained on human-like egocentric visual inputs substantially underperform on image recognition tasks compared to humans. These models train on raw, uniform visual inputs collected from head-mounted cameras. This is different from humans, as the anatomical structure of the retina and visual cortex relatively amplifies the central visual information, i.e. around humans' gaze location. This selective amplification in humans likely aids in forming object-centered visual representations. Here, we investigate whether focusing on central visual information boosts egocentric visual object learning. We simulate 5-months of egocentric visual experience using the large-scale Ego4D dataset and generate gaze locations with a human gaze prediction model. To account for the importance of central vision in humans, we crop the visual area around the gaze location. Finally, we train a time-based SSL model on these modified inputs. Our experiments demonstrate that focusing on central vision leads to better object-centered representations. Our analysis shows that the SSL model leverages the temporal dynamics of the gaze movements to build stronger visual representations. Overall, our work marks a significant step toward bio-inspired learning of visual representations.

Video Object-Centric Learning seeks to decompose raw videos into a small set of object slots, but existing slot-attention models often suffer from severe over-fragmentation. This is because the model is implicitly encouraged to occupy all slots to minimize the reconstruction objective, thereby representing a single object with multiple redundant slots. We tackle this limitation with a reconstruction-guided slot curriculum (SlotCurri). Training starts with only a few coarse slots and progressively allocates new slots where reconstruction error remains high, thus expanding capacity only where it is needed and preventing fragmentation from the outset. Yet, during slot expansion, meaningful sub-parts can emerge only if coarse-level semantics are already well separated; however, with a small initial slot budget and an MSE objective, semantic boundaries remain blurry. Therefore, we augment MSE with a structure-aware loss that preserves local contrast and edge information to encourage each slot to sharpen its semantic boundaries. Lastly, we propose a cyclic inference that rolls slots forward and then backward through the frame sequence, producing temporally consistent object representations even in the earliest frames. All combined, SlotCurri addresses object over-fragmentation by allocating representational capacity where reconstruction fails, further enhanced by structural cues and cyclic inference. Notable FG-ARI gains of +6.8 on YouTube-VIS and +8.3 on MOVi-C validate the effectiveness of SlotCurri. Our code is available at github.com/wjun0830/SlotCurri.

The emergence of multimodal large language models (MLLMs) has driven breakthroughs in egocentric vision applications. These applications necessitate persistent, context-aware understanding of objects, as users interact with tools in dynamic and cluttered environments. However, existing embodied benchmarks primarily focus on static scene exploration, emphasizing object's appearance and spatial attributes while neglecting the assessment of dynamic changes arising from users' interactions. To address this gap, we introduce EOC-Bench, an innovative benchmark designed to systematically evaluate object-centric embodied cognition in dynamic egocentric scenarios. Specially, EOC-Bench features 3,277 meticulously annotated QA pairs categorized into three temporal categories: Past, Present, and Future, covering 11 fine-grained evaluation dimensions and 3 visual object referencing types. To ensure thorough assessment, we develop a mixed-format human-in-the-loop annotation framework with four types of questions and design a novel multi-scale temporal accuracy metric for open-ended temporal evaluation. Based on EOC-Bench, we conduct comprehensive evaluations of various proprietary, open-source, and object-level MLLMs. EOC-Bench serves as a crucial tool for advancing the embodied object cognitive capabilities of MLLMs, establishing a robust foundation for developing reliable core models for embodied systems.

Object manipulation is a common component of everyday tasks, but learning to manipulate objects from high-dimensional observations presents significant challenges. These challenges are heightened in multi-object environments due to the combinatorial complexity of the state space as well as of the desired behaviors. While recent approaches have utilized large-scale offline data to train models from pixel observations, achieving performance gains through scaling, these methods struggle with compositional generalization in unseen object configurations with constrained network and dataset sizes. To address these issues, we propose a novel behavioral cloning (BC) approach that leverages object-centric representations and an entity-centric Transformer with diffusion-based optimization, enabling efficient learning from offline image data. Our method first decomposes observations into an object-centric representation, which is then processed by our entity-centric Transformer that computes attention at the object level, simultaneously predicting object dynamics and the agent's actions. Combined with the ability of diffusion models to capture multi-modal behavior distributions, this results in substantial performance improvements in multi-object tasks and, more importantly, enables compositional generalization. We present BC agents capable of zero-shot generalization to tasks with novel compositions of objects and goals, including larger numbers of objects than seen during training. We provide video rollouts on our webpage: https://sites.google.com/view/ec-diffuser.

We present OAKINK2, a dataset of bimanual object manipulation tasks for complex daily activities. In pursuit of constructing the complex tasks into a structured representation, OAKINK2 introduces three level of abstraction to organize the manipulation tasks: Affordance, Primitive Task, and Complex Task. OAKINK2 features on an object-centric perspective for decoding the complex tasks, treating them as a sequence of object affordance fulfillment. The first level, Affordance, outlines the functionalities that objects in the scene can afford, the second level, Primitive Task, describes the minimal interaction units that humans interact with the object to achieve its affordance, and the third level, Complex Task, illustrates how Primitive Tasks are composed and interdependent. OAKINK2 dataset provides multi-view image streams and precise pose annotations for the human body, hands and various interacting objects. This extensive collection supports applications such as interaction reconstruction and motion synthesis. Based on the 3-level abstraction of OAKINK2, we explore a task-oriented framework for Complex Task Completion (CTC). CTC aims to generate a sequence of bimanual manipulation to achieve task objectives. Within the CTC framework, we employ Large Language Models (LLMs) to decompose the complex task objectives into sequences of Primitive Tasks and have developed a Motion Fulfillment Model that generates bimanual hand motion for each Primitive Task. OAKINK2 datasets and models are available at https://oakink.net/v2.

Large multimodal foundation models, particularly in the domains of language and vision, have significantly advanced various tasks, including robotics, autonomous driving, information retrieval, and grounding. However, many of these models perceive objects as indivisible, overlooking the components that constitute them. Understanding these components and their associated affordances provides valuable insights into an object's functionality, which is fundamental for performing a wide range of tasks. In this work, we introduce a novel real-world benchmark, InstructPart, comprising hand-labeled part segmentation annotations and task-oriented instructions to evaluate the performance of current models in understanding and executing part-level tasks within everyday contexts. Through our experiments, we demonstrate that task-oriented part segmentation remains a challenging problem, even for state-of-the-art Vision-Language Models (VLMs). In addition to our benchmark, we introduce a simple baseline that achieves a twofold performance improvement through fine-tuning with our dataset. With our dataset and benchmark, we aim to facilitate research on task-oriented part segmentation and enhance the applicability of VLMs across various domains, including robotics, virtual reality, information retrieval, and other related fields. Project website: https://zifuwan.github.io/InstructPart/.

Skill-augmented agents improve sample efficiency by distilling successful trajectories into reusable strategies. Yet most existing approaches remain text-centric, linearizing spatial layouts and action-state correspondences into language that loses critical geometric structure. Recent efforts have begun incorporating visual evidence, but construct and update skills separately from policy optimization, leaving their mutual improvement underexplored. We propose ViSkill, a visual-native skill learning framework that encodes successful interactions as composite visual skill cards directly accessible to VLM agents. Retrieved skills guide both inference and reward shaping, while successful trajectories are distilled back into the library, forming a closed feedback loop in which skill accumulation and policy improvement reinforce each other. An optional cold-start mechanism further accelerates early-stage learning. Evaluated on Sokoban, FrozenLake, and PrimitiveSkill, ViSkill achieves an overall success rate of 0.89, rising to 0.91 with cold-start initialization, outperforming all evaluated proprietary and open-source baselines while converging faster than standard PPO. Our code is available at https://github.com/ZJU-REAL/ViSkill.

Causal representation learning has showed a variety of settings in which we can disentangle latent variables with identifiability guarantees (up to some reasonable equivalence class). Common to all of these approaches is the assumption that (1) the latent variables are represented as d-dimensional vectors, and (2) that the observations are the output of some injective generative function of these latent variables. While these assumptions appear benign, we show that when the observations are of multiple objects, the generative function is no longer injective and disentanglement fails in practice. We can address this failure by combining recent developments in object-centric learning and causal representation learning. By modifying the Slot Attention architecture arXiv:2006.15055, we develop an object-centric architecture that leverages weak supervision from sparse perturbations to disentangle each object's properties. This approach is more data-efficient in the sense that it requires significantly fewer perturbations than a comparable approach that encodes to a Euclidean space and we show that this approach successfully disentangles the properties of a set of objects in a series of simple image-based disentanglement experiments.

A world model is essential for an agent to predict the future and plan in domains such as autonomous driving and robotics. To achieve this, recent advancements have focused on video generation, which has gained significant attention due to the impressive success of diffusion models. However, these models require substantial computational resources. To address these challenges, we propose a world model leveraging object-centric representation space using slot attention, guided by language instructions. Our model perceives the current state as an object-centric representation and predicts future states in this representation space conditioned on natural language instructions. This approach results in a more compact and computationally efficient model compared to diffusion-based generative alternatives. Furthermore, it flexibly predicts future states based on language instructions, and offers a significant advantage in manipulation tasks where object recognition is crucial. In this paper, we demonstrate that our latent predictive world model surpasses generative world models in visuo-linguo-motor control tasks, achieving superior sample and computation efficiency. We also investigate the generalization performance of the proposed method and explore various strategies for predicting actions using object-centric representations.

In this paper, we propose VideoLLaMA3, a more advanced multimodal foundation model for image and video understanding. The core design philosophy of VideoLLaMA3 is vision-centric. The meaning of "vision-centric" is two-fold: the vision-centric training paradigm and vision-centric framework design. The key insight of our vision-centric training paradigm is that high-quality image-text data is crucial for both image and video understanding. Instead of preparing massive video-text datasets, we focus on constructing large-scale and high-quality image-text datasets. VideoLLaMA3 has four training stages: 1) vision-centric alignment stage, which warms up the vision encoder and projector; 2) vision-language pretraining stage, which jointly tunes the vision encoder, projector, and LLM with large-scale image-text data covering multiple types (including scene images, documents, charts) as well as text-only data. 3) multi-task fine-tuning stage, which incorporates image-text SFT data for downstream tasks and video-text data to establish a foundation for video understanding. 4) video-centric fine-tuning, which further improves the model's capability in video understanding. As for the framework design, to better capture fine-grained details in images, the pretrained vision encoder is adapted to encode images of varying sizes into vision tokens with corresponding numbers, rather than a fixed number of tokens. For video inputs, we reduce the number of vision tokens according to their similarity so that the representation of videos will be more precise and compact. Benefit from vision-centric designs, VideoLLaMA3 achieves compelling performances in both image and video understanding benchmarks.

Humans excel at abstracting data and constructing reusable concepts, a capability lacking in current continual learning systems. The field of object-centric learning addresses this by developing abstract representations, or slots, from data without human supervision. Different methods have been proposed to tackle this task for images, whereas most are overly complex, non-differentiable, or poorly scalable. In this paper, we introduce a conceptually simple, fully-differentiable, non-iterative, and scalable method called SAMP Simplified Slot Attention with Max Pool Priors). It is implementable using only Convolution and MaxPool layers and an Attention layer. Our method encodes the input image with a Convolutional Neural Network and then uses a branch of alternating Convolution and MaxPool layers to create specialized sub-networks and extract primitive slots. These primitive slots are then used as queries for a Simplified Slot Attention over the encoded image. Despite its simplicity, our method is competitive or outperforms previous methods on standard benchmarks.

Multimodal Large Language Models (MLLMs) have shown strong performance on Video Temporal Grounding (VTG). However, their coarse recognition capabilities are insufficient for fine-grained temporal understanding, making task-specific fine-tuning indispensable. This fine-tuning causes models to memorize dataset-specific shortcuts rather than faithfully grounding in the actual visual content, leading to poor Out-of-Domain (OOD) generalization. Object-centric learning offers a promising remedy by decomposing scenes into entity-level representations, but existing approaches require re-running the entire multi-stage training pipeline from scratch. We propose SlotVTG, a framework that steers MLLMs toward object-centric, input-grounded visual reasoning at minimal cost. SlotVTG introduces a lightweight slot adapter that decomposes visual tokens into abstract slots via slot attention and reconstructs the original sequence, where objectness priors from a self-supervised vision model encourage semantically coherent slot formation. Cross-domain evaluation on standard VTG benchmarks demonstrates that our approach significantly improves OOD robustness while maintaining competitive In-Domain (ID) performance with minimal overhead.

Previous studies on robotic manipulation are based on a limited understanding of the underlying 3D motion constraints and affordances. To address these challenges, we propose a comprehensive paradigm, termed UniAff, that integrates 3D object-centric manipulation and task understanding in a unified formulation. Specifically, we constructed a dataset labeled with manipulation-related key attributes, comprising 900 articulated objects from 19 categories and 600 tools from 12 categories. Furthermore, we leverage MLLMs to infer object-centric representations for manipulation tasks, including affordance recognition and reasoning about 3D motion constraints. Comprehensive experiments in both simulation and real-world settings indicate that UniAff significantly improves the generalization of robotic manipulation for tools and articulated objects. We hope that UniAff will serve as a general baseline for unified robotic manipulation tasks in the future. Images, videos, dataset, and code are published on the project website at:https://sites.google.com/view/uni-aff/home

Understanding objects is a central building block of artificial intelligence, especially for embodied AI. Even though object recognition excels with deep learning, current machines still struggle to learn higher-level knowledge, e.g., what attributes an object has, and what can we do with an object. In this work, we propose a challenging Object Concept Learning (OCL) task to push the envelope of object understanding. It requires machines to reason out object affordances and simultaneously give the reason: what attributes make an object possesses these affordances. To support OCL, we build a densely annotated knowledge base including extensive labels for three levels of object concept (category, attribute, affordance), and the causal relations of three levels. By analyzing the causal structure of OCL, we present a baseline, Object Concept Reasoning Network (OCRN). It leverages causal intervention and concept instantiation to infer the three levels following their causal relations. In experiments, OCRN effectively infers the object knowledge while following the causalities well. Our data and code are available at https://mvig-rhos.com/ocl.

Object-centric architectures usually apply a differentiable module to the entire feature map to decompose it into sets of entity representations called slots. Some of these methods structurally resemble clustering algorithms, where the cluster's center in latent space serves as a slot representation. Slot Attention is an example of such a method, acting as a learnable analog of the soft k-means algorithm. Our work employs a learnable clustering method based on the Gaussian Mixture Model. Unlike other approaches, we represent slots not only as centers of clusters but also incorporate information about the distance between clusters and assigned vectors, leading to more expressive slot representations. Our experiments demonstrate that using this approach instead of Slot Attention improves performance in object-centric scenarios, achieving state-of-the-art results in the set property prediction task.

We introduce PerceptionComp, a manually annotated benchmark for complex, long-horizon, perception-centric video reasoning. PerceptionComp is designed so that no single moment is sufficient: answering each question requires multiple temporally separated pieces of visual evidence and compositional constraints under conjunctive and sequential logic, spanning perceptual subtasks such as objects, attributes, relations, locations, actions, and events, and requiring skills including semantic recognition, visual correspondence, temporal reasoning, and spatial reasoning. The benchmark contains 1,114 highly complex questions on 279 videos from diverse domains including city walk tours, indoor villa tours, video games, and extreme outdoor sports, with 100% manual annotation. Human studies show that PerceptionComp requires substantial test-time thinking and repeated perception steps: participants take much longer than on prior benchmarks, and accuracy drops to near chance (18.97%) when rewatching is disallowed. State-of-the-art MLLMs also perform substantially worse on PerceptionComp than on existing benchmarks: the best model in our evaluation, Gemini-3-Flash, reaches only 45.96% accuracy in the five-choice setting, while open-source models remain below 40%. These results suggest that perception-centric long-horizon video reasoning remains a major bottleneck, and we hope PerceptionComp will help drive progress in perceptual reasoning.

The development of general robotic systems capable of manipulating in unstructured environments is a significant challenge. While Vision-Language Models(VLM) excel in high-level commonsense reasoning, they lack the fine-grained 3D spatial understanding required for precise manipulation tasks. Fine-tuning VLM on robotic datasets to create Vision-Language-Action Models(VLA) is a potential solution, but it is hindered by high data collection costs and generalization issues. To address these challenges, we propose a novel object-centric representation that bridges the gap between VLM's high-level reasoning and the low-level precision required for manipulation. Our key insight is that an object's canonical space, defined by its functional affordances, provides a structured and semantically meaningful way to describe interaction primitives, such as points and directions. These primitives act as a bridge, translating VLM's commonsense reasoning into actionable 3D spatial constraints. In this context, we introduce a dual closed-loop, open-vocabulary robotic manipulation system: one loop for high-level planning through primitive resampling, interaction rendering and VLM checking, and another for low-level execution via 6D pose tracking. This design ensures robust, real-time control without requiring VLM fine-tuning. Extensive experiments demonstrate strong zero-shot generalization across diverse robotic manipulation tasks, highlighting the potential of this approach for automating large-scale simulation data generation.

Learning object-centric representations of complex scenes is a promising step towards enabling efficient abstract reasoning from low-level perceptual features. Yet, most deep learning approaches learn distributed representations that do not capture the compositional properties of natural scenes. In this paper, we present the Slot Attention module, an architectural component that interfaces with perceptual representations such as the output of a convolutional neural network and produces a set of task-dependent abstract representations which we call slots. These slots are exchangeable and can bind to any object in the input by specializing through a competitive procedure over multiple rounds of attention. We empirically demonstrate that Slot Attention can extract object-centric representations that enable generalization to unseen compositions when trained on unsupervised object discovery and supervised property prediction tasks.

Learning representations that generalize to novel compositions of known concepts is crucial for bridging the gap between human and machine perception. One prominent effort is learning object-centric representations, which are widely conjectured to enable compositional generalization. Yet, it remains unclear when this conjecture will be true, as a principled theoretical or empirical understanding of compositional generalization is lacking. In this work, we investigate when compositional generalization is guaranteed for object-centric representations through the lens of identifiability theory. We show that autoencoders that satisfy structural assumptions on the decoder and enforce encoder-decoder consistency will learn object-centric representations that provably generalize compositionally. We validate our theoretical result and highlight the practical relevance of our assumptions through experiments on synthetic image data.

Egocentric video captures activities from the wearer's perspective, providing a direct view of human attention, hand--object interaction, and goal-directed behavior. This perspective is increasingly important for wearable intelligence, assistive systems, human--robot interaction, and embodied AI, yet it introduces challenges including ego-motion, occlusion, small active objects, viewpoint-dependent appearance, and long-range temporal dependencies. Vision--language models (VLMs) offer a promising foundation for addressing these challenges by linking visual observations with semantic knowledge and natural-language supervision. This survey presents a critical review of VLMs for egocentric video understanding, tracing the progression from conventional recognition architectures to multimodal foundation models and embodied systems. We organize the literature around tasks, datasets, hand--object interaction understanding, temporal reasoning, frame and clip selection, multimodal representation learning, prompting, semantic alignment, and model adaptation. Particular attention is given to graph-based and object-centric reasoning as mechanisms for modeling relations among hands, objects, actions, and scene context over time. We further examine how first-person perception and multimodal foundation models support wearable assistance, robot skill learning, human-to-robot transfer, and embodied decision making. Across the reviewed literature, a consistent limitation emerges: current models recognize visible objects more reliably than evolving interactions, actions, and user intent, especially over long activities. We therefore identify temporally grounded reasoning, interaction-aware supervision, efficient long-video processing, multimodal fusion, graph-enhanced representations, cross-domain generalization, privacy, and trustworthy evaluation as key priorities for deployable embodied intelligence.

Recent works in self-supervised learning have demonstrated strong performance on scene-level dense prediction tasks by pretraining with object-centric or region-based correspondence objectives. In this paper, we present Region-to-Object Representation Learning (R2O) which unifies region-based and object-centric pretraining. R2O operates by training an encoder to dynamically refine region-based segments into object-centric masks and then jointly learns representations of the contents within the mask. R2O uses a "region refinement module" to group small image regions, generated using a region-level prior, into larger regions which tend to correspond to objects by clustering region-level features. As pretraining progresses, R2O follows a region-to-object curriculum which encourages learning region-level features early on and gradually progresses to train object-centric representations. Representations learned using R2O lead to state-of-the art performance in semantic segmentation for PASCAL VOC (+0.7 mIOU) and Cityscapes (+0.4 mIOU) and instance segmentation on MS COCO (+0.3 mask AP). Further, after pretraining on ImageNet, R2O pretrained models are able to surpass existing state-of-the-art in unsupervised object segmentation on the Caltech-UCSD Birds 200-2011 dataset (+2.9 mIoU) without any further training. We provide the code/models from this work at https://github.com/KKallidromitis/r2o.

Spatial intelligence is a critical component of embodied AI, promoting robots to understand and interact with their environments. While recent advances have enhanced the ability of VLMs to perceive object locations and positional relationships, they still lack the capability to precisely understand object orientations-a key requirement for tasks involving fine-grained manipulations. Addressing this limitation not only requires geometric reasoning but also an expressive and intuitive way to represent orientation. In this context, we propose that natural language offers a more flexible representation space than canonical frames, making it particularly suitable for instruction-following robotic systems. In this paper, we introduce the concept of semantic orientation, which defines object orientations using natural language in a reference-frame-free manner (e.g., the ''plug-in'' direction of a USB or the ''handle'' direction of a knife). To support this, we construct OrienText300K, a large-scale dataset of 3D models annotated with semantic orientations that link geometric understanding to functional semantics. By integrating semantic orientation into a VLM system, we enable robots to generate manipulation actions with both positional and orientational constraints. Extensive experiments in simulation and real world demonstrate that our approach significantly enhances robotic manipulation capabilities, e.g., 48.7% accuracy on Open6DOR and 74.9% accuracy on SIMPLER.

Vision-Language Model (VLM) agents have advanced zero-shot object-goal navigation, yet single-frame reasoning leaves them without the cross-step behavioral awareness an embodied navigator requires, producing recurring failures such as dead-end stalls, in-room loops, and circuitous approaches to detected targets. Prompt-based remedies inflate token budgets across multi-submodule episodes and still struggle to encode inherently spatial signals such as angles, map cells, and viewpoint coordinates. In this paper, we propose SkillNav, an extensible behavioral skill framework for VLM-based navigation that treats the curiosity value map already maintained by modern VLM navigators as a writable substrate on which composable skills inscribe behavioral memory at zero token cost. Skills are stratified into three tiers by their level of behavioral authority, namely soft scaling for proportional reweighting, lower-bound boost for region-level guarantees, and hard override for threshold-triggered forced actions, and cooperate across tiers under a fixed composition order that establishes a predictable, declared priority among skills. This design turns capability improvement into skill registration: new behaviors plug in without retraining the VLM or disturbing existing skills, opening a path for continual refinement. A minimal prompt channel complements the score-level skills with category-level semantic hints, yielding a dual-representation design in which spatial memory lives on the map and semantic memory in short prompts. Training-free, SkillNav establishes new state-of-the-art SPL across MP3D (25.5), HM3D v0.1 (39.3), and HM3D v0.2 (43.2), improving SPL by up to 6.0 absolute over the strongest prior method, and achieves the highest Success Rate on HM3D v0.1 (69.7) and v0.2 (75.9).

Reliable execution of long-horizon mobile manipulation tasks remains challenging because overall task success depends on the successful completion of multiple constituent skills. Existing benchmarks, however, still rely primarily on full-task rollouts and aggregate task-level metrics, making intermediate failures difficult to observe and analyze. We present Behavior-Skill, a benchmark that reformulates the learning and evaluation of long-horizon tasks around executable constituent skills. It contains 235,492 skill instances from 10,000 demonstrations across 50 household tasks and 34 semantic skill categories. Each instance pairs a skill instruction with an aligned observation-action segment, and is further associated with a restorable intermediate state and a skill success condition to enable independent evaluation under valid preconditions. We further introduce trajectory-level and skill-level metrics to characterize policy capability beyond aggregate task success. Extensive experiments across representative VLA policies including pi0.5 and GR00T on the complete 50-task benchmark show that failures are highly non-uniform across skills, with contact-rich manipulation skills forming persistent bottlenecks. These results demonstrate that Behavior-Skill complements full-task evaluation by exposing intermediate capability profiles for analyzing and improving long-horizon VLA policies. Behavior-Skill is publicly available at https://github.com/nubot-nudt/Behavior-Skill.

We focus on the task of language-conditioned grasping in clutter, in which a robot is supposed to grasp the target object based on a language instruction. Previous works separately conduct visual grounding to localize the target object, and generate a grasp for that object. However, these works require object labels or visual attributes for grounding, which calls for handcrafted rules in planner and restricts the range of language instructions. In this paper, we propose to jointly model vision, language and action with object-centric representation. Our method is applicable under more flexible language instructions, and not limited by visual grounding error. Besides, by utilizing the powerful priors from the pre-trained multi-modal model and grasp model, sample efficiency is effectively improved and the sim2real problem is relived without additional data for transfer. A series of experiments carried out in simulation and real world indicate that our method can achieve better task success rate by less times of motion under more flexible language instructions. Moreover, our method is capable of generalizing better to scenarios with unseen objects and language instructions. Our code is available at https://github.com/xukechun/Vision-Language-Grasping

Object-Centric Motion Generation (OCMG) plays a key role in a variety of industrial applicationsx2014such as robotic spray painting and weldingx2014requiring efficient, scalable, and generalizable algorithms to plan multiple long-horizon trajectories over free-form 3D objects. However, existing solutions rely on specialized heuristics, expensive optimization routines, or restrictive geometry assumptions that limit their adaptability to real-world scenarios. In this work, we introduce a novel, fully data-driven framework that tackles OCMG directly from 3D point clouds, learning to generalize expert path patterns across free-form surfaces. We propose MaskPlanner, a deep learning method that predicts local path segments for a given object while simultaneously inferring "path masks" to group these segments into distinct paths. This design induces the network to capture both local geometric patterns and global task requirements in a single forward pass. Extensive experimentation on a realistic robotic spray painting scenario shows that our approach attains near-complete coverage (above 99%) for unseen objects, while it remains task-agnostic and does not explicitly optimize for paint deposition. Moreover, our real-world validation on a 6-DoF specialized painting robot demonstrates that the generated trajectories are directly executable and yield expert-level painting quality. Our findings crucially highlight the potential of the proposed learning method for OCMG to reduce engineering overhead and seamlessly adapt to several industrial use cases.

Articulated objects are central to interactive 3D applications, including embodied AI, robotics, and VR/AR, where functional part decomposition and kinematic motion are essential. Yet producing high-fidelity articulated assets remains difficult to scale because it requires reliable part decomposition and kinematic rigging. Existing approaches largely fall into two paradigms: optimization-based reconstruction or distillation, which can be accurate but often takes tens of minutes to hours per instance, and inference-time methods that rely on template or part retrieval, producing plausible results that may not match the specific structure and appearance in the input observation. We introduce a part-centric generative framework for articulated object creation that synthesizes part geometry, composition, and articulation under explicit part-aware conditioning. Our representation models an object as a set of movable parts, each encoded by latent tokens augmented with part identity and articulation cues. Conditioned on a single image, the model generates articulated 3D assets that preserve instance-level correspondence while maintaining valid part structure and motion. The resulting approach avoids per-instance optimization, enables fast feed-forward inference, and supports controllable assembly and articulation, which are important for embodied interaction. Experiments on common articulated categories (e.g., drawers and doors) show improved input consistency, part accuracy, and articulation plausibility over optimization-based and retrieval-driven baselines, while substantially reducing inference time.

The generalization capabilities of robotic manipulation policies are heavily influenced by the choice of visual representations. Existing approaches typically rely on representations extracted from pre-trained encoders, using two dominant types of features: global features, which summarize an entire image via a single pooled vector, and dense features, which preserve a patch-wise embedding from the final encoder layer. While widely used, both feature types mix task-relevant and irrelevant information, leading to poor generalization under distribution shifts, such as changes in lighting, textures, or the presence of distractors. In this work, we explore an intermediate structured alternative: Slot-Based Object-Centric Representations (SBOCR), which group dense features into a finite set of object-like entities. This representation permits to naturally reduce the noise provided to the robotic manipulation policy while keeping enough information to efficiently perform the task. We benchmark a range of global and dense representations against intermediate slot-based representations, across a suite of simulated and real-world manipulation tasks ranging from simple to complex. We evaluate their generalization under diverse visual conditions, including changes in lighting, texture, and the presence of distractors. Our findings reveal that SBOCR-based policies outperform dense and global representation-based policies in generalization settings, even without task-specific pretraining. These insights suggest that SBOCR is a promising direction for designing visual systems that generalize effectively in dynamic, real-world robotic environments.

We introduce COMET (Causal Object-centric Model for Efficient Tree search), a model-based reinforcement learning algorithm that performs Monte Carlo Tree Search in a slot-structured latent space. COMET pairs a frozen unsupervised object-centric encoder with a transformer-based world model, in which actions are bound to objects through a novel action-slot fusion mechanism that is used in slot transition prediction. Policy and value heads use object-causal attention, modulating token interactions by learned per-slot relevance scores so that decision-making concentrates on task-relevant entities. COMET adds an explicit object-level inductive bias to MuZero-style latent planning. Across eight visually and dynamically diverse tasks from the Object-Centric Visual RL benchmark, ManiSkill, Robosuite, and VizDoom, COMET achieves a higher mean normalized score during the early stages of training compared to object-centric and monolithic baselines.

This paper explores agentic 3D spatial understanding, i.e., MLLM agents performing 3D reasoning through tool use. Existing methods often misuse tools and exhibit biased tool preferences under 3D scenarios, leaving the agentic paradigm with only marginal gains over non-agentic strategies. We reveal that 3D spatial reasoning tasks are heterogeneous across scenes, while these agents apply a uniform tool-use strategy to all scenes rather than selecting tools according to the specific scene and task. To address this, we propose Skill-3D, a framework that learns self-evolving scene-aware skills. Specifically, Skill-3D identifies the task scene and records the agent's tool-use trajectory into a Scene Memory, where successful trajectories from similar scenes are aggregated and distilled into a reusable scene-aware skill, with failed ones attached to the skill as lessons. During training, once a similar scene recurs, the corresponding skill is injected to guide the agent, producing new trajectories whose successes and failures further refine the skill, forming a loop in which the memory and the skill library co-evolve. Experiments show that Skill-3D substantially improves tool utilization in 3D spatial reasoning (from 39% to 78% on VSI-Bench), driving the agent toward correct and sufficient tool use. For instance, it improves Gemini-3-Flash by 67% on MMSI-Bench. Furthermore, we conduct agentic post-training over skill-guided trajectories, which boosts Qwen3-VL-8B by 43% on VSI-Bench.

Skills have emerged as a practical and effective approach for enhancing LLM agents at inference time through structured packages of knowledge. However, existing evaluations largely measure whether skills improve aggregated task success, leaving a more fundamental question underexplored: \textbf{When do skills help, why do they work, and where do they fail?} Through controlled experiments across various benchmarks, agent harnesses and LLMs, we isolate the effects of representation, outcome annotation, retrieval difficulty, and cross-framework robustness of skills. To further answer this question, we design a contrastive study that combines controlled quantitative experiments with paired trajectory analysis. We normalize 8,135 trial records from controlled experiments and retain 238 valid unique labels from 240 open-coded records. We consolidate these observations into a taxonomy of three high-level categories and twelve skill-use modes: skills work when noisy trajectories become procedural anchors that stabilize execution. Skills improve over Workflow Memory by 6.06 points in matched comparisons. Procedural anchoring accounts for 65.7\% of skill cases, versus 4.5\% for explicit knowledge injection, showing that skills stabilize action rather than inject missing facts. Retrieval is a separate bottleneck: as pools grow from 5 to 100, actual-use precision falls from 29.6\% to 3.3\%. Confusable distractors impair offline identification, yet downstream success remains stable; exact ground-truth invocation is neither sufficient nor necessary. Skills fail under brittle assumptions, incompatible contexts, or insufficient adaptation. These findings move evaluation beyond aggregate success rates and guide reliable self-evolving agents.

Imitation learning has proven to be highly effective in teaching robots dexterous manipulation skills. However, it typically relies on large amounts of human demonstration data, which limits its scalability and applicability in dynamic, real-world environments. One key challenge in this context is object generalization, where a robot trained to perform a task with one object, such as "hand over the apple," struggles to transfer its skills to a semantically similar but visually different object, such as "hand over the peach." This gap in generalization to new objects beyond those in the same category has yet to be adequately addressed in previous work on end-to-end visuomotor policy learning. In this paper, we present a simple yet effective approach for achieving object generalization through Vision-Language-Action (VLA) models, referred to as ObjectVLA. Our model enables robots to generalize learned skills to novel objects without requiring explicit human demonstrations for each new target object. By leveraging vision-language pair data, our method provides a lightweight and scalable way to inject knowledge about the target object, establishing an implicit link between the object and the desired action. We evaluate ObjectVLA on a real robotic platform, demonstrating its ability to generalize across 100 novel objects with a 64\% success rate in selecting objects not seen during training. Furthermore, we propose a more accessible method for enhancing object generalization in VLA models, using a smartphone to capture a few images and fine-tune the pre-trained model. These results highlight the effectiveness of our approach in enabling object-level generalization and reducing the need for extensive human demonstrations, paving the way for more flexible and scalable robotic learning systems.

Cognitive science suggests that spatial ability develops progressively-from perception to reasoning and interaction. Yet in multimodal LLMs (MLLMs), this hierarchy remains poorly understood, as most studies focus on a narrow set of tasks. We introduce SpatialTree, a cognitive-science-inspired hierarchy that organizes spatial abilities into four levels: low-level perception (L1), mental mapping (L2), simulation (L3), and agentic competence (L4). Based on this taxonomy, we construct the first capability-centric hierarchical benchmark, thoroughly evaluating mainstream MLLMs across 27 sub-abilities. The evaluation results reveal a clear structure: L1 skills are largely orthogonal, whereas higher-level skills are strongly correlated, indicating increasing interdependency. Through targeted supervised fine-tuning, we uncover a surprising transfer dynamic-negative transfer within L1, but strong cross-level transfer from low- to high-level abilities with notable synergy. Finally, we explore how to improve the entire hierarchy. We find that naive RL that encourages extensive "thinking" is unreliable: it helps complex reasoning but hurts intuitive perception. We propose a simple auto-think strategy that suppresses unnecessary deliberation, enabling RL to consistently improve performance across all levels. By building SpatialTree, we provide a proof-of-concept framework for understanding and systematically scaling spatial abilities in MLLMs.

Spatial visualization is the mental ability to imagine, transform, and manipulate the spatial characteristics of objects and actions. This intelligence is a part of human cognition where actions and perception are connected on a mental level. To explore whether state-of-the-art Vision-Language Models (VLMs) exhibit this ability, we develop MentalBlackboard, an open-ended spatial visualization benchmark for Paper Folding and Hole Punching tests within two core tasks: prediction and planning. Our prediction experiments reveal that models struggle with applying symmetrical transformations, even when they predict the sequence of unfolding steps correctly. Also, rotations introduce a significant challenge to the physical situational awareness for models. The planning task reveals limitations of models in analyzing symmetrical relationships and in implementing the multi-stage symmetry process, with Claude Opus 4.1 achieving the highest planning score at an accuracy of 10\%. The top-performing model, o3, attains a peak performance of 71.6\% on the generalization task, which does not require spatial visualization but transfers spatial data; however, it achieves only 25\% accuracy on text-based prediction tasks.

Well structured visual representations can make robot learning faster and can improve generalization. In this paper, we study how we can acquire effective object-centric representations for robotic manipulation tasks without human labeling by using autonomous robot interaction with the environment. Such representation learning methods can benefit from continuous refinement of the representation as the robot collects more experience, allowing them to scale effectively without human intervention. Our representation learning approach is based on object persistence: when a robot removes an object from a scene, the representation of that scene should change according to the features of the object that was removed. We formulate an arithmetic relationship between feature vectors from this observation, and use it to learn a representation of scenes and objects that can then be used to identify object instances, localize them in the scene, and perform goal-directed grasping tasks where the robot must retrieve commanded objects from a bin. The same grasping procedure can also be used to automatically collect training data for our method, by recording images of scenes, grasping and removing an object, and recording the outcome. Our experiments demonstrate that this self-supervised approach for tasked grasping substantially outperforms direct reinforcement learning from images and prior representation learning methods.

Embodied agents face significant challenges when tasked with performing actions in diverse environments, particularly in generalizing across object types and executing suitable actions to accomplish tasks. Furthermore, agents should exhibit robustness, minimizing the execution of illegal actions. In this work, we present Egocentric Planning, an innovative approach that combines symbolic planning and Object-oriented POMDPs to solve tasks in complex environments, harnessing existing models for visual perception and natural language processing. We evaluated our approach in ALFRED, a simulated environment designed for domestic tasks, and demonstrated its high scalability, achieving an impressive 36.07% unseen success rate in the ALFRED benchmark and winning the ALFRED challenge at CVPR Embodied AI workshop. Our method requires reliable perception and the specification or learning of a symbolic description of the preconditions and effects of the agent's actions, as well as what object types reveal information about others. It is capable of naturally scaling to solve new tasks beyond ALFRED, as long as they can be solved using the available skills. This work offers a solid baseline for studying end-to-end and hybrid methods that aim to generalize to new tasks, including recent approaches relying on LLMs, but often struggle to scale to long sequences of actions or produce robust plans for novel tasks.

Understanding the ability of humans to use objects is crucial for AI to improve daily life. Existing studies for learning such ability focus on human-object patterns (e.g., contact, spatial relation, orientation) in static situations, and learning Human-Object Interaction (HOI) patterns over time (i.e., movement of human and object) is relatively less explored. In this paper, we introduce a novel type of affordance named Dynamic Affordance. For a given input 3D object mesh, we learn dynamic affordance which models the distribution of both (1) human motion and (2) human-guided object pose during interactions. As a core idea, we present a method to learn the 3D dynamic affordance from synthetically generated 2D videos, leveraging a pre-trained video diffusion model. Specifically, we propose a pipeline that first generates 2D HOI videos from the 3D object and then lifts them into 3D to generate 4D HOI samples. Once we generate diverse 4D HOI samples on various target objects, we train our DAViD, where we present a method based on the Low-Rank Adaptation (LoRA) module for pre-trained human motion diffusion model (MDM) and an object pose diffusion model with human pose guidance. Our motion diffusion model is extended for multi-object interactions, demonstrating the advantage of our pipeline with LoRA for combining the concepts of object usage. Through extensive experiments, we demonstrate our DAViD outperforms the baselines in generating human motion with HOIs.

Real-world embodied tasks, from everyday activities to professional procedures, require agents to act under physical constraints while tracking evolving object and task states. Tool use sits at the heart of such tasks, as many everyday and professional activities are tool-mediated. Understanding them requires reasoning about affordances, hand-tool-object geometry, procedural progress, and causal effects on target objects. Yet despite strong performance on perception-oriented video tasks such as captioning and general video QA, current multimodal video models remain limited in this form of tool-centric embodied reasoning. Progress in this direction has been limited by the lack of real-world egocentric data and diagnostic benchmarks. To address this gap, we introduce EgoTools, the first comprehensive suite for egocentric tool-use understanding. It consists of two complementary components: EgoTools-Data, a large-scale corpus of 100 hours of tool-centric egocentric recordings with synchronized audio, dense captions, reasoning-heavy narrations, and supplementary 3D information; and EgoTools-Bench, a diagnostic benchmark of 1,000 QA pairs across four tracks that cover tool-use understanding from perception and geometry to procedure and causal reasoning. Experimental results show that current models still struggle to ground tool use in visual evidence: Gemini-3.1-Pro achieves 66.9% overall accuracy but only 51.7% on Perception & Grounding. Beyond evaluation, we validate EgoTools-Data as a training resource. On the full 1,000-question benchmark, full supervised fine-tuning improves Qwen3-VL-8B-Instruct from 50.0% to 60.9%, under strict source-video separation. Together, these results establish EgoTools as a unified resource for both training and diagnostic evaluation of real-world egocentric tool-use understanding.

This paper presents Objectness SIMilarity (OSIM), a novel evaluation metric for 3D scenes that explicitly focuses on "objects," which are fundamental units of human visual perception. Existing metrics assess overall image quality, leading to discrepancies with human perception. Inspired by neuropsychological insights, we hypothesize that human recognition of 3D scenes fundamentally involves attention to individual objects. OSIM enables object-centric evaluations by leveraging an object detection model and its feature representations to quantify the "objectness" of each object in the scene. Our user study demonstrates that OSIM aligns more closely with human perception compared to existing metrics. We also analyze the characteristics of OSIM using various approaches. Moreover, we re-evaluate recent 3D reconstruction and generation models under a standardized experimental setup to clarify advancements in this field. The code is available at https://github.com/Objectness-Similarity/OSIM.

Spatial reasoning requires more than access to geometric tools: a reasoner must decide when direct observation is sufficient and when to reconstruct, measure, or change reference frames. We present SpatialBrain, a framework that retains experience about these decisions while keeping its vision-language backbone fixed. The key distinction is between evidence about a scene and experience about how to reason with that evidence. 3DFusionMemory fuses current-scene observations into queryable spatial relations. A Spatial Skill Library provides reusable tool procedures, and Spatial Cognition associates task conditions with experience about when and how to use memory and skills. Completed trajectories are abstracted into process records and consolidated between task blocks, allowing later decisions to draw on earlier execution without transferring scene coordinates or reference answers. Across five spatial-reasoning benchmarks, SpatialBrain improves on direct answers from the same backbone on four and ties on the fifth. Component comparisons, experience-coverage curves, and traced resource decisions characterize how the framework accumulates and uses these resources.

This paper focuses on building object-centric representations for long-term action anticipation in videos. Our key motivation is that objects provide important cues to recognize and predict human-object interactions, especially when the predictions are longer term, as an observed "background" object could be used by the human actor in the future. We observe that existing object-based video recognition frameworks either assume the existence of in-domain supervised object detectors or follow a fully weakly-supervised pipeline to infer object locations from action labels. We propose to build object-centric video representations by leveraging visual-language pretrained models. This is achieved by "object prompts", an approach to extract task-specific object-centric representations from general-purpose pretrained models without finetuning. To recognize and predict human-object interactions, we use a Transformer-based neural architecture which allows the "retrieval" of relevant objects for action anticipation at various time scales. We conduct extensive evaluations on the Ego4D, 50Salads, and EGTEA Gaze+ benchmarks. Both quantitative and qualitative results confirm the effectiveness of our proposed method.

We introduce an object-aware decoder for improving the performance of spatio-temporal representations on ego-centric videos. The key idea is to enhance object-awareness during training by tasking the model to predict hand positions, object positions, and the semantic label of the objects using paired captions when available. At inference time the model only requires RGB frames as inputs, and is able to track and ground objects (although it has not been trained explicitly for this). We demonstrate the performance of the object-aware representations learnt by our model, by: (i) evaluating it for strong transfer, i.e. through zero-shot testing, on a number of downstream video-text retrieval and classification benchmarks; and (ii) by using the representations learned as input for long-term video understanding tasks (e.g. Episodic Memory in Ego4D). In all cases the performance improves over the state of the art -- even compared to networks trained with far larger batch sizes. We also show that by using noisy image-level detection as pseudo-labels in training, the model learns to provide better bounding boxes using video consistency, as well as grounding the words in the associated text descriptions. Overall, we show that the model can act as a drop-in replacement for an ego-centric video model to improve performance through visual-text grounding.

When interacting with objects, humans effectively reason about which regions of objects are viable for an intended action, i.e., the affordance regions of the object. They can also account for subtle differences in object regions based on the task to be performed and whether one or two hands need to be used. However, current vision-based affordance prediction methods often reduce the problem to naive object part segmentation. In this work, we propose a framework for extracting affordance data from human activity video datasets. Our extracted 2HANDS dataset contains precise object affordance region segmentations and affordance class-labels as narrations of the activity performed. The data also accounts for bimanual actions, i.e., two hands co-ordinating and interacting with one or more objects. We present a VLM-based affordance prediction model, 2HandedAfforder, trained on the dataset and demonstrate superior performance over baselines in affordance region segmentation for various activities. Finally, we show that our predicted affordance regions are actionable, i.e., can be used by an agent performing a task, through demonstration in robotic manipulation scenarios.

Small object-centric spatial understanding in indoor videos remains a significant challenge for multimodal large language models (MLLMs), despite its practical value for object search and assistive applications. Although existing benchmarks have advanced video spatial intelligence, embodied reasoning, and diagnostic perception, no existing benchmark directly evaluates whether a model can localize a target object in video and express its position with sufficient precision for downstream use. In this work, we introduce PinpointQA, the first dataset and benchmark for small object-centric spatial understanding in indoor videos. Built from ScanNet++ and ScanNet200, PinpointQA comprises 1,024 scenes and 10,094 QA pairs organized into four progressively challenging tasks: Target Presence Verification (TPV), Nearest Reference Identification (NRI), Fine-Grained Spatial Description (FSD), and Structured Spatial Prediction (SSP). The dataset is built from intermediate spatial representations, with QA pairs generated automatically and further refined through quality control. Experiments on representative MLLMs reveal a consistent capability gap along the progressive chain, with SSP remaining particularly difficult. Supervised fine-tuning on PinpointQA yields substantial gains, especially on the harder tasks, demonstrating that PinpointQA serves as both a diagnostic benchmark and an effective training dataset. The dataset and project page are available at https://rainchowz.github.io/PinpointQA.

We investigate the ability of Vision Language Models (VLMs) to perform visual perspective taking using a novel set of visual tasks inspired by established human tests. Our approach leverages carefully controlled scenes, in which a single humanoid minifigure is paired with a single object. By systematically varying spatial configurations - such as object position relative to the humanoid minifigure and the humanoid minifigure's orientation - and using both bird's-eye and surface-level views, we created 144 unique visual tasks. Each visual task is paired with a series of 7 diagnostic questions designed to assess three levels of visual cognition: scene understanding, spatial reasoning, and visual perspective taking. Our evaluation of several state-of-the-art models, including GPT-4-Turbo, GPT-4o, Llama-3.2-11B-Vision-Instruct, and variants of Claude Sonnet, reveals that while they excel in scene understanding, the performance declines significantly on spatial reasoning and further deteriorates on perspective-taking. Our analysis suggests a gap between surface-level object recognition and the deeper spatial and perspective reasoning required for complex visual tasks, pointing to the need for integrating explicit geometric representations and tailored training protocols in future VLM development.

Unsupervised object-centric representation (OCR) learning has recently drawn attention as a new paradigm of visual representation. This is because of its potential of being an effective pre-training technique for various downstream tasks in terms of sample efficiency, systematic generalization, and reasoning. Although image-based reinforcement learning (RL) is one of the most important and thus frequently mentioned such downstream tasks, the benefit in RL has surprisingly not been investigated systematically thus far. Instead, most of the evaluations have focused on rather indirect metrics such as segmentation quality and object property prediction accuracy. In this paper, we investigate the effectiveness of OCR pre-training for image-based reinforcement learning via empirical experiments. For systematic evaluation, we introduce a simple object-centric visual RL benchmark and conduct experiments to answer questions such as ``Does OCR pre-training improve performance on object-centric tasks?'' and ``Can OCR pre-training help with out-of-distribution generalization?''. Our results provide empirical evidence for valuable insights into the effectiveness of OCR pre-training for RL and the potential limitations of its use in certain scenarios. Additionally, this study also examines the critical aspects of incorporating OCR pre-training in RL, including performance in a visually complex environment and the appropriate pooling layer to aggregate the object representations.

Egocentric manipulation videos are highly challenging due to severe occlusions during interactions and frequent object entries and exits from the camera view as the person moves. Current methods typically focus on recovering either hand or object pose in isolation, but both struggle during interactions and fail to handle out-of-sight cases. Moreover, their independent predictions often lead to inconsistent hand-object relations. We introduce WHOLE, a method that holistically reconstructs hand and object motion in world space from egocentric videos given object templates. Our key insight is to learn a generative prior over hand-object motion to jointly reason about their interactions. At test time, the pretrained prior is guided to generate trajectories that conform to the video observations. This joint generative reconstruction substantially outperforms approaches that process hands and objects separately followed by post-processing. WHOLE achieves state-of-the-art performance on hand motion estimation, 6D object pose estimation, and their relative interaction reconstruction. Project website: https://judyye.github.io/whole-www

Visual perspective-taking (VPT), the ability to understand the viewpoint of another person, enables individuals to anticipate the actions of other people. For instance, a driver can avoid accidents by assessing what pedestrians see. Humans typically develop this skill in early childhood, but it remains unclear whether the recently emerging Vision Language Models (VLMs) possess such capability. Furthermore, as these models are increasingly deployed in the real world, understanding how they perform nuanced tasks like VPT becomes essential. In this paper, we introduce two manually curated datasets, Isle-Bricks and Isle-Dots for testing VPT skills, and we use it to evaluate 12 commonly used VLMs. Across all models, we observe a significant performance drop when perspective-taking is required. Additionally, we find performance in object detection tasks is poorly correlated with performance on VPT tasks, suggesting that the existing benchmarks might not be sufficient to understand this problem. The code and the dataset will be available at https://sites.google.com/view/perspective-taking

Vision-Language-Action models and World-Action Models have advanced language-conditioned robotic manipulation, yet often leave metric relations among actions, objects, and scene geometry implicit. Human manipulation combines semantic understanding of task-relevant objects with spatial feedback that guides hand motion relative to objects and their surroundings. Inspired by this, we introduce a metric interaction framework that models object-level and scene-level interactions in physical Cartesian space at a shared metric scale. At the object level, Interaction-Centric Tokens (ICTs) explicitly represent end-effector pose trajectories relative to manipulated objects and are jointly denoised with actions, providing physically grounded interaction supervision. At the scene level, the Metric Action Interaction Field (MAIF) uses action and ICT queries to attend to metric scene point-cloud features and learns geometry-conditioned action corrections. Through two-stage adaptation, our framework improves diverse VLA and WAM baselines with a small number of additional parameters and training steps. Experiments demonstrate average success-rate gains of 0.80 and 3.59 percentage points on LIBERO and RoboTwin 2.0, respectively, alongside gains of 6.80 percentage points on real-world tasks and 7.45 percentage points on their out-of-distribution variants.

Recent LLM agents benefit from skills for solving complex tasks. Skills encapsulate modular packages of procedural knowledge and instructions for performing specialized tasks, such as setting up a sandboxed environment, running a test suite, or refactoring a function across multiple files. As skill libraries grow and become reusable across tasks and domains, selecting an appropriate skill composition has emerged as a central bottleneck. Existing approaches fall into two categories. One exposes the agent's reasoning to the entire skill collection; the other performs skill retrieval via embeddings or LLM-based rerankers. Both provide useful insights; however, they miss the structural nature of skill composition, which is a joint decision over which skills, how many, and in what order -- three dimensions that cannot be decoupled. We formalize this as structured skill composition: given a task and a skill library, predict an executable skill plan that jointly specifies the activated subset, count, and execution order. We propose SkillComposer, which instantiates structured skill composition as task-conditioned skill sequence prediction. SkillComposer uses a constrained autoregressive decoder over skill identifiers, so subset, count, and order emerge jointly from a single decoding pass, and dependencies between successive skills are captured naturally. We build a training set of task-composition pairs from a real, human-curated skill library. We then evaluate SkillComposer along two axes: composition quality on a held-out test set, and downstream task success on SkillsBench across two production-grade coding agents. On GPT-5.2-Codex, Gemini-3-Pro-Preview, SkillComposer raises the pass rate by +23.1, +18.2pp over the no-skill baseline, surpassing top-3 retrieval and matching the gold-skill retrieval upper bound at lower prompt-token cost.

Grasping objects by a specific part is often crucial for safety and for executing downstream tasks. Yet, learning-based grasp planners lack this behavior unless they are trained on specific object part data, making it a significant challenge to scale object diversity. Instead, we propose LERF-TOGO, Language Embedded Radiance Fields for Task-Oriented Grasping of Objects, which uses vision-language models zero-shot to output a grasp distribution over an object given a natural language query. To accomplish this, we first reconstruct a LERF of the scene, which distills CLIP embeddings into a multi-scale 3D language field queryable with text. However, LERF has no sense of objectness, meaning its relevancy outputs often return incomplete activations over an object which are insufficient for subsequent part queries. LERF-TOGO mitigates this lack of spatial grouping by extracting a 3D object mask via DINO features and then conditionally querying LERF on this mask to obtain a semantic distribution over the object with which to rank grasps from an off-the-shelf grasp planner. We evaluate LERF-TOGO's ability to grasp task-oriented object parts on 31 different physical objects, and find it selects grasps on the correct part in 81% of all trials and grasps successfully in 69%. See the project website at: lerftogo.github.io

Task driven object detection aims to detect object instances suitable for affording a task in an image. Its challenge lies in object categories available for the task being too diverse to be limited to a closed set of object vocabulary for traditional object detection. Simply mapping categories and visual features of common objects to the task cannot address the challenge. In this paper, we propose to explore fundamental affordances rather than object categories, i.e., common attributes that enable different objects to accomplish the same task. Moreover, we propose a novel multi-level chain-of-thought prompting (MLCoT) to extract the affordance knowledge from large language models, which contains multi-level reasoning steps from task to object examples to essential visual attributes with rationales. Furthermore, to fully exploit knowledge to benefit object recognition and localization, we propose a knowledge-conditional detection framework, namely CoTDet. It conditions the detector from the knowledge to generate object queries and regress boxes. Experimental results demonstrate that our CoTDet outperforms state-of-the-art methods consistently and significantly (+15.6 box AP and +14.8 mask AP) and can generate rationales for why objects are detected to afford the task.

Multimodal Large Language Models (MLLMs) show strong visual perception, yet remain limited in reasoning about space under changing viewpoints. We study this challenge as Perspective-Conditioned Spatial Reasoning (PCSR) in 360-degree omnidirectional images, where broad scene coverage reduces ambiguity from partial observations without eliminating the need for viewpoint-dependent inference. To assess this capability, we introduce PCSR-Bench, a diagnostic benchmark of 84,373 question-answer pairs from 2,600 omnidirectional images across 26 indoor environments. PCSR-Bench contains eight tasks spanning foundational perception (e.g., object counting, relative distance, and relative direction) and advanced PCSR, including compositional chains, egocentric rotation, perspective re-anchoring, ego-distortion, and limited-FOV visibility. We evaluate 14 representative MLLMs and observe a substantial perception-reasoning gap: accuracy reaches 57.59% on foundational relative direction, but drops to 13.49% on egocentric rotation, 7.13% on egocentric distortion, and 0.64% on open-ended compositional reasoning. To probe the plasticity of this gap, we conduct an RL-based diagnostic study on a 7B-scale model. Reward shaping improves a matched 7B baseline from 31.10% to 60.06% under a controlled setting, suggesting that PCSR is partial plasticity rather than being fully immutable. Still, the gains are task-selective, sensitive to reward design including both weight allocation and reward formulation, and partially dependent on the evaluation protocol. These results position PCSR as a key bottleneck in current MLLMs and highlight limited but meaningful room for recovery under targeted optimization.

Spatial intelligence remains a persistent challenge for Multimodal Large Language Models (MLLMs), as it requires coherent spatial scene representations beyond basic object recognition. Existing methods typically build such representations through textual reasoning or 3D reconstruction. However, they often falter during multi-step reasoning, particularly when required to dynamically re-anchor evidence to the specific camera-, object-, or direction-centric reference frames demanded by complex queries. To address this, we propose OmniView-Space, a framework designed to maintain spatial consistency through multimodal egocentric evidence. Our approach consists of three core components: (1) Multi-Perspective Spatial Mapping (MPSM), which re-anchors reconstructed geometry into a query-aligned visual cognitive map and a textual spatial graph; (2) Tool-Guided Egocentric Reasoning, an interleaved policy trained to actively select the ego anchor required by the query and request the corresponding MPSM evidence; and (3) Cognitive-Map Distillation, which uses MPSM-generated trajectories and ego-frame rewards to train the model to reason with self-generated cognitive maps. Experiments on single- and multi-image spatial reasoning benchmarks show that OmniView-Space achieves state-of-the-art performance. Furthermore, the distilled model maintains this performance while reducing reliance on external geometry pipelines.

We present SpinBench, a cognitively grounded diagnostic benchmark for evaluating spatial reasoning in vision language models (VLMs). SpinBench is designed around the core challenge of spatial reasoning: perspective taking, the ability to reason about how scenes and object relations change under viewpoint transformation. Since perspective taking requires multiple cognitive capabilities, such as recognizing objects across views, relative positions grounding, and mentally simulating transformations, SpinBench introduces a set of fine-grained diagnostic categories. Our categories target translation, rotation, object relative pose, and viewpoint change, and are progressively structured so that single-object simpler tasks scaffold toward the most demanding multi-object perspective-taking setting. We evaluate 37 state-of-the-art VLMs, both proprietary and open source. Results reveal systematic weaknesses: strong egocentric bias, poor rotational understanding, and inconsistencies under symmetrical and syntactic reformulations. Scaling analysis shows both smooth improvements and emergent capabilities. While human subjects achieve high accuracy (91.2\%), task difficulty as measured by human response time shows strong correlation with VLM accuracy, indicating that SpinBench captures spatial reasoning challenges shared across humans and VLMs. We believe SpinBench provides critical insights into spatial reasoning in VLMs and highlights key gaps in their ability to reason about physical space. Our website can be found at https://spinbench25.github.io/.

LLM agents increasingly rely on reusable skills, capability packages that combine instructions, control flow, constraints, and tool calls. In most current agent systems, however, skills are still represented by text-heavy artifacts, including SKILL.md-style documents and structured records whose machine-usable evidence remains embedded largely in natural-language descriptions. This poses a challenge for skill-centered agent systems: managing skill collections and using skills to support agent both require reasoning over invocation interfaces, execution structure, and concrete side effects that are often entangled in a single textual surface. An explicit representation of skill knowledge may therefore help make these artifacts easier for machines to acquire and leverage. Drawing on Memory Organization Packets, Script Theory, and Conceptual Dependency from Schank and Abelson's classical work on linguistic knowledge representation, we introduce what is, to our knowledge, the first structured representation for agent skill artifacts that disentangles skill-level scheduling signals, scene-level execution structure, and logic-level action and resource-use evidence: the Scheduling-Structural-Logical (SSL) representation. We instantiate SSL with an LLM-based normalizer and evaluate it on a corpus of skills in two tasks, Skill Discovery and Risk Assessment, and superiorly outperform the text-only baselines: in Skill Discovery, SSL improves MRR from 0.573 to 0.707; in Risk Assessment, it improves macro F1 from 0.744 to 0.787. These findings reveal that explicit, source-grounded structure makes agent skills easier to search and review. They also suggest that SSL is best understood as a practical step toward more inspectable, reusable, and operationally actionable skill representations for agent systems, rather than as a finished standard or an end-to-end mechanism for managing and using skills.

Manipulating objects is a hallmark of human intelligence, and an important task in domains such as robotics. In principle, Reinforcement Learning (RL) offers a general approach to learn object manipulation. In practice, however, domains with more than a few objects are difficult for RL agents due to the curse of dimensionality, especially when learning from raw image observations. In this work we propose a structured approach for visual RL that is suitable for representing multiple objects and their interaction, and use it to learn goal-conditioned manipulation of several objects. Key to our method is the ability to handle goals with dependencies between the objects (e.g., moving objects in a certain order). We further relate our architecture to the generalization capability of the trained agent, based on a theoretical result for compositional generalization, and demonstrate agents that learn with 3 objects but generalize to similar tasks with over 10 objects. Videos and code are available on the project website: https://sites.google.com/view/entity-centric-rl

Scenes in the real world are often composed of several static and dynamic objects. Capturing their 4-dimensional structures, composition and spatio-temporal configuration in-the-wild, though extremely interesting, is equally hard. Therefore, existing works often focus on one object at a time, while relying on some category-specific parametric shape model for dynamic objects. This can lead to inconsistent scene configurations, in addition to being limited to the modeled object categories. We propose COM4D (Compositional 4D), a method that consistently and jointly predicts the structure and spatio-temporal configuration of 4D/3D objects using only static multi-object or dynamic single object supervision. We achieve this by a carefully designed training of spatial and temporal attentions on 2D video input. The training is disentangled into learning from object compositions on the one hand, and single object dynamics throughout the video on the other, thus completely avoiding reliance on 4D compositional training data. At inference time, our proposed attention mixing mechanism combines these independently learned attentions, without requiring any 4D composition examples. By alternating between spatial and temporal reasoning, COM4D reconstructs complete and persistent 4D scenes with multiple interacting objects directly from monocular videos. Furthermore, COM4D provides state-of-the-art results in existing separate problems of 4D object and composed 3D reconstruction despite being purely data-driven.

LLM agents are increasingly expected not only to complete isolated tasks, but also to carry bounded representations of human expertise, judgment, and interaction style. Building such person-grounded agents remains difficult because actionable knowledge associated with a person or role is usually embedded in heterogeneous traces rather than written as clean instructions. Existing memory and persona systems capture fragments of this evidence, while skill frameworks provide portable packaging formats; however, there is no end-to-end workflow for distilling these traces into inspectable, correctable, and agent-usable skills. We present an automated trace-to-skill distillation system for generating person-grounded AI skills via expert knowledge distillation. Given materials from a target person or role, COLLEAGUE.SKILL produces a versioned skill package with two coordinated tracks: a capability track for practices, mental models, and decision heuristics, and a bounded behavior track for communication style, interaction rules, and correction history. The package can be inspected, invoked, updated through natural-language feedback, rolled back, installed across agent hosts, and optionally prepared for controlled distribution. We describe the artifact contract, generation workflow, correction lifecycle, deployment surface, and domain presets implemented in the open-source system. At the time of writing, the public repository has approximately 18.5k GitHub stars; the gallery lists 215 skills from 165 contributors and more than 100k cumulative stars across listed skill cards. The system illustrates how person-grounded skills can be represented as portable, correctable packages rather than opaque prompts or hidden memories.

Large language model agents increasingly store reusable procedures outside the model. These reusable procedures are often called skills: they may be code functions, natural-language instructions, SKILL.md packages, workflow graphs, or learned adapters that a future agent can retrieve and invoke. This taxonomy-driven survey asks how such skill libraries change over time. Across a 124-paper 2023--2026 audit set, we synthesize dynamic skill systems as lifecycle-managed, verified, evolving artifact stores: agents collect evidence from interaction, propose skill updates, verify and admit candidates, organize them for retrieval and composition, repair or prune stale entries, and govern sharing through provenance and rollback. We organize the literature around three survey tools. First, a six-sense taxonomy distinguishes the structurally different artifacts called ``skills'' in current papers. Second, an eight-stage lifecycle architecture identifies the recurring design decisions behind evidence acquisition, proposal, verification/admission, storage, retrieval/composition, maintenance, distillation/portability, and governance. Third, a lightweight skill-record schema and ten-operator vocabulary provide common terms for comparing library updates without elevating them into a separate method contribution. Using this structure, we synthesize evidence-graded patterns with explicit caveats: admission and repair are repeatedly important, verifier quality materially affects skill-aware RL, flat retrieval can degrade as libraries grow, and current benchmarks still under-report library trajectories, usage--utility gaps, and safety surfaces. We close with concrete reporting standards and open problems for evaluating dynamic skills as changing libraries rather than static prompt or tool collections.

Detection identifies objects as axis-aligned boxes in an image. Most successful object detectors enumerate a nearly exhaustive list of potential object locations and classify each. This is wasteful, inefficient, and requires additional post-processing. In this paper, we take a different approach. We model an object as a single point --- the center point of its bounding box. Our detector uses keypoint estimation to find center points and regresses to all other object properties, such as size, 3D location, orientation, and even pose. Our center point based approach, CenterNet, is end-to-end differentiable, simpler, faster, and more accurate than corresponding bounding box based detectors. CenterNet achieves the best speed-accuracy trade-off on the MS COCO dataset, with 28.1% AP at 142 FPS, 37.4% AP at 52 FPS, and 45.1% AP with multi-scale testing at 1.4 FPS. We use the same approach to estimate 3D bounding box in the KITTI benchmark and human pose on the COCO keypoint dataset. Our method performs competitively with sophisticated multi-stage methods and runs in real-time.

3D Visual Question-Answering (3D VQA) is pivotal for models to perceive the physical world and perform spatial reasoning. Answer-centric supervision is a commonly used training method for 3D VQA models. Many models that utilize this strategy have achieved promising results in 3D VQA tasks. However, the answer-centric approach only supervises the final output of models and allows models to develop reasoning pathways freely. The absence of supervision on the reasoning pathway enables the potential for developing superficial shortcuts through common patterns in question-answer pairs. Moreover, although slow-thinking methods advance large language models, they suffer from underthinking. To address these issues, we propose HCNQA, a 3D VQA model leveraging a hierarchical concentration narrowing supervision method. By mimicking the human process of gradually focusing from a broad area to specific objects while searching for answers, our method guides the model to perform three phases of concentration narrowing through hierarchical supervision. By supervising key checkpoints on a general reasoning pathway, our method can ensure the development of a rational and effective reasoning pathway. Extensive experimental results demonstrate that our method can effectively ensure that the model develops a rational reasoning pathway and performs better. The code is available at https://github.com/JianuoZhu/HCNQA.

Interactive object understanding, or what we can do to objects and how is a long-standing goal of computer vision. In this paper, we tackle this problem through observation of human hands in in-the-wild egocentric videos. We demonstrate that observation of what human hands interact with and how can provide both the relevant data and the necessary supervision. Attending to hands, readily localizes and stabilizes active objects for learning and reveals places where interactions with objects occur. Analyzing the hands shows what we can do to objects and how. We apply these basic principles on the EPIC-KITCHENS dataset, and successfully learn state-sensitive features, and object affordances (regions of interaction and afforded grasps), purely by observing hands in egocentric videos.

Referring video object segmentation aims to segment the object in a video corresponding to a given natural language expression. While prior works have explored various referring scenarios, including motion-centric or multi-instance expressions, most approaches still focus on localizing a single target object in isolation. However, in comprehensive video understanding, an object's role is often defined by its interactions with other entities, which are largely overlooked in existing datasets and models. In this work, we introduce Interaction-aware referring video object sgementation (InterRVOS), a new task that requires segmenting both actor and target entities involved in an interaction. Each interactoin is described through a pair of complementary expressions from different semantic perspectives, enabling fine-grained modeling of inter-object relationships. To tackle this task, we propose InterRVOS-8K, the large-scale and automatically constructed dataset containing diverse interaction-aware expressions with corresponding masks, including challenging cases such as motion-only multi-instance expressions. We also present a baseline architecture, ReVIOSa, designed to handle actor-target segmentation from a single expression, achieving strong performance in both standard and interaction-focused settings. Furthermore, we introduce an actor-target-aware evalaution setting that enables a more targeted assessment of interaction understanding. Experimental results demonstrate that our approach outperforms prior methods in modeling complex object interactions for referring video object segmentation task, establishing a strong foundation for future research in interaction-centric video understanding. Our project page is available at https://cvlab-kaist.github.io/InterRVOS.

Current Large Language Models have achieved Olympiad-level logic, yet Vision-Language Models paradoxically falter on elementary spatial tasks like block counting. This capability mismatch reveals a critical ``spatial intelligence gap,'' where models fail to construct coherent 3D mental representations from 2D observations. We uncover this gap via diagnostic analyses showing the bottleneck is a missing view-consistent spatial interface rather than insufficient visual features or weak reasoning. To bridge this, we introduce 3ViewSense, a framework that grounds spatial reasoning in Orthographic Views. Drawing on engineering cognition, we propose a ``Simulate-and-Reason'' mechanism that decomposes complex scenes into canonical orthographic projections to resolve geometric ambiguities. By aligning egocentric perceptions with these allocentric references, our method facilitates explicit mental rotation and reconstruction. Empirical results on spatial reasoning benchmarks demonstrate that our method significantly outperforms existing baselines, with consistent gains on occlusion-heavy counting and view-consistent spatial reasoning. The framework also improves the stability and consistency of spatial descriptions, offering a scalable path toward stronger spatial intelligence in multimodal systems.

We propose a novel, object-agnostic method for learning a universal policy for dexterous object grasping from realistic point cloud observations and proprioceptive information under a table-top setting, namely UniDexGrasp++. To address the challenge of learning the vision-based policy across thousands of object instances, we propose Geometry-aware Curriculum Learning (GeoCurriculum) and Geometry-aware iterative Generalist-Specialist Learning (GiGSL) which leverage the geometry feature of the task and significantly improve the generalizability. With our proposed techniques, our final policy shows universal dexterous grasping on thousands of object instances with 85.4% and 78.2% success rate on the train set and test set which outperforms the state-of-the-art baseline UniDexGrasp by 11.7% and 11.3%, respectively.

Deep Reinforcement Learning has shown significant progress in extracting useful representations from high-dimensional inputs albeit using hand-crafted auxiliary tasks and pseudo rewards. Automatically learning such representations in an object-centric manner geared towards control and fast adaptation remains an open research problem. In this paper, we introduce a method that tries to discover meaningful features from objects, translating them to temporally coherent "question" functions and leveraging the subsequent learned general value functions for control. We compare our approach with state-of-the-art techniques alongside other ablations and show competitive performance in both stationary and non-stationary settings. Finally, we also investigate the discovered general value functions and through qualitative analysis show that the learned representations are not only interpretable but also, centered around objects that are invariant to changes across tasks facilitating fast adaptation.

Facilitating an entity's interaction with objects requires accurately identifying parts that afford specific actions. Weakly supervised affordance grounding (WSAG) seeks to imitate human learning from third-person demonstrations, where humans intuitively grasp functional parts without needing pixel-level annotations. To achieve this, grounding is typically learned using a shared classifier across images from different perspectives, along with distillation strategies incorporating part discovery process. However, since affordance-relevant parts are not always easily distinguishable, models primarily rely on classification, often focusing on common class-specific patterns that are unrelated to affordance. To address this limitation, we move beyond isolated part-level learning by introducing selective prototypical and pixel contrastive objectives that adaptively learn affordance-relevant cues at both the part and object levels, depending on the granularity of the available information. Initially, we find the action-associated objects in both egocentric (object-focused) and exocentric (third-person example) images by leveraging CLIP. Then, by cross-referencing the discovered objects of complementary views, we excavate the precise part-level affordance clues in each perspective. By consistently learning to distinguish affordance-relevant regions from affordance-irrelevant background context, our approach effectively shifts activation from irrelevant areas toward meaningful affordance cues. Experimental results demonstrate the effectiveness of our method. Codes are available at github.com/hynnsk/SelectiveCL.

Current vision-language models may incorporate single-dimensional spatial cues, such as depth, object boundary, and basic spatial directions (e.g. left, right, front, back), yet often lack the multi-dimensional spatial reasoning necessary for human-like understanding and real-world applications. To address this gap, we develop SPHERE (Spatial Perception and Hierarchical Evaluation of REasoning), a hierarchical evaluation framework with a new human-annotated dataset to pinpoint model strengths and weaknesses, advancing from single-skill tasks to multi-skill tasks, and ultimately to complex reasoning tasks that require the integration of multiple spatial and visual cues with logical reasoning. Benchmark evaluation of state-of-the-art open-source models reveal significant shortcomings, especially in the abilities to understand distance and proximity, to reason from both allocentric and egocentric viewpoints, and to perform complex reasoning in a physical context. This work underscores the need for more advanced approaches to spatial understanding and reasoning, paving the way for improvements in vision-language models and their alignment with human-like spatial capabilities. The dataset will be open-sourced upon publication.

The Theory of Multiple Intelligences underscores the hierarchical nature of cognitive capabilities. To advance Spatial Artificial Intelligence, we pioneer a psychometric framework defining five Basic Spatial Abilities (BSAs) in Visual Language Models (VLMs): Spatial Perception, Spatial Relation, Spatial Orientation, Mental Rotation, and Spatial Visualization. Benchmarking 13 mainstream VLMs through nine validated psychometric experiments reveals significant gaps versus humans (average score 24.95 vs. 68.38), with three key findings: 1) VLMs mirror human hierarchies (strongest in 2D orientation, weakest in 3D rotation) with independent BSAs (Pearson's r<0.4); 2) Smaller models such as Qwen2-VL-7B surpass larger counterparts, with Qwen leading (30.82) and InternVL2 lagging (19.6); 3) Interventions like chain-of-thought (0.100 accuracy gain) and 5-shot training (0.259 improvement) show limits from architectural constraints. Identified barriers include weak geometry encoding and missing dynamic simulation. By linking psychometric BSAs to VLM capabilities, we provide a diagnostic toolkit for spatial intelligence evaluation, methodological foundations for embodied AI development, and a cognitive science-informed roadmap for achieving human-like spatial intelligence.

With the recent development of generative models, Text-to-3D generations have also seen significant growth. Nonetheless, achieving precise control over 3D generation continues to be an arduous task, as using text to control often leads to missing objects and imprecise locations. Contemporary strategies for enhancing controllability in 3D generation often entail the introduction of additional parameters, such as customized diffusion models. This often induces hardness in adapting to different diffusion models or creating distinct objects. In this paper, we present LucidDreaming as an effective pipeline capable of fine-grained control over 3D generation. It requires only minimal input of 3D bounding boxes, which can be deduced from a simple text prompt using a Large Language Model. Specifically, we propose clipped ray sampling to separately render and optimize objects with user specifications. We also introduce object-centric density blob bias, fostering the separation of generated objects. With individual rendering and optimizing of objects, our method excels not only in controlled content generation from scratch but also within the pre-trained NeRF scenes. In such scenarios, existing generative approaches often disrupt the integrity of the original scene, and current editing methods struggle to synthesize new content in empty spaces. We show that our method exhibits remarkable adaptability across a spectrum of mainstream Score Distillation Sampling-based 3D generation frameworks, and achieves superior alignment of 3D content when compared to baseline approaches. We also provide a dataset of prompts with 3D bounding boxes, benchmarking 3D spatial controllability.