new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 17

The Edge of Jets and Subleading Non-Global Logs

A persistent and fascinating problem at the high energy colliders are jets. Often trying to observe physics underlying the hard interactions at colliders requires experimental cuts in phase space, defining several jet or beam regions. QCD being a gauge theory that readily decays into infra-red modes, correlations between jet regions is almost inevitable, spoiling the predictivity of fixed order QCD calculations. One is faced with the task of calculating the evolution of a reduced density matrix, where successively less energetic (jet) regions are integrated out, to gain control of the calculation. I relate the decay rates governing the flow into the IR to an effective field theory expansion in soft jets, allowing a systematic and resummed calculation of these rates, while further relating them to physically observable features of the QCD cascade. To demonstrate the utility of the soft jet expansion, I present a factorization theorem for a soft subjet collinearly splitting in and out of a parent fat jet. Using the resummation properties of this factorization theorem, I elucidate the structure of the subleading non-global logs (encoding the jet correlations) in the hemisphere jet mass distribution, as well as give a collinear improvement of the leading order resummation equation, the BMS equation. I compare to other approaches to subleading resummation of NGLs, and find the collinear improvement of the leading order equation removes the need for kinematic-dependent corrections in the IR averaging procedure of the reduced density matrix, so that no further large logs can be generated in the IR. Finally I end with speculation about connections with collinear improvements of the NLO B-JIMWLK hierarchy for small-x resummation.

  • 1 authors
·
Aug 29, 2015

EFT Validity and Truncation Uncertainty from few Nuisance Parameters

An observable in an Effective Field Theory (EFT) is an expansion in a set of small parameters, no different than any other perturbation series. Truncating such a series expansion leaves the leading dropped term as the dominant source of error, and that term itself contains a calculable portion. We explore the partial calculation of this next-order error, available at dim-6^2 in SMEFT with no additional tools needed to simulate it, and explore how to efficiently use that partial calculation to model the next-order uncertainty in full using a minimal number of nuisance parameters. This estimate of the uncertainty of the EFT signal rate naturally imposes EFT validity by ensuring that bounds are driven by kinematic regions where truncation uncertainties are parametrically smaller than the signal. We incorporate the calculable dim-6^2 piece into the signal and cover the remaining higher-dimension uncertainty with a small set of nuisance parameters derived from a scan over Wilson-coefficient values. Our algorithm to determine the relevant nuisance parameters and distributions is automation-friendly and applies to arbitrary truncation choices. We then provide multiple examples of its implementation in high-energy collider processes focused on SMEFT truncated at O(Λ^{-2}), where the dim-6^2 piece is used to estimate the full mathcal O(Λ^{-4}) dependence. In the examples considered here the reduction of nuisance parameters is appreciable, generically reducing the nuisance parameter count by an order of magnitude compared to naïve estimates.

  • 3 authors
·
Jul 1

Analytic Solution for the Helicity Evolution Equations at Small x and Large N_c&N_f

We construct an exact analytic solution of the revised small-x helicity evolution equations, where the contributions of the quark-to-gluon and gluon-to-quark transition operators were newly included. These evolution equations are written in the large-N_c&N_f limit and are double-logarithmic, resumming powers of alpha_sln^2(1/x). Here N_c and N_f are the numbers of quark colors and flavors, while alpha_s is the strong coupling constant and x is the Bjorken-x variable. Using our solution, we obtain analytic expressions for the flavor singlet quark and gluon helicity parton distribution functions (PDFs) and for the g_1 structure function as double-inverse Laplace transforms. We also extract analytic expressions for the four DGLAP polarized anomalous dimensions Delta gamma_{qq}, Delta gamma_{qG}, Delta gamma_{Gq}, and Delta gamma_{GG}: these expressions resum powers of alpha_s/omega^2 to all orders at large-N_c&N_f (with omega the Mellin moment variable). We extract the leading small-x growth of the helicity distributions, align \Delta\Sigma(x,Q^2) \sim \Delta G(x,Q^2)\sim g_1(x,Q^2) \sim \left(1{x}\right)^{\alpha_h}, align where the intercept alpha_h satisfies an algebraic equation. We determine alpha_h numerically for various values of N_c and N_f. We further obtain the explicit asymptotic expressions for the helicity distributions, which yield numerical values for the ratio of the gluon helicity PDF to the flavor singlet quark helicity PDF in the small-x asymptotic limit (for different N_f/N_c). We find that all our predictions for polarized DGLAP anomalous dimensions are fully consistent with the existing finite-order calculations. Similar to the large-N_c case, our intercept alpha_h exhibits a very slight disagreement with the predictions made within the infrared evolution equations framework.

  • 2 authors
·
Jul 31, 2025

The Two-Pass Softmax Algorithm

The softmax (also called softargmax) function is widely used in machine learning models to normalize real-valued scores into a probability distribution. To avoid floating-point overflow, the softmax function is conventionally implemented in three passes: the first pass to compute the normalization constant, and two other passes to compute outputs from normalized inputs. We analyze two variants of the Three-Pass algorithm and demonstrate that in a well-optimized implementation on HPC-class processors performance of all three passes is limited by memory bandwidth. We then present a novel algorithm for softmax computation in just two passes. The proposed Two-Pass algorithm avoids both numerical overflow and the extra normalization pass by employing an exotic representation for intermediate values, where each value is represented as a pair of floating-point numbers: one representing the "mantissa" and another representing the "exponent". Performance evaluation demonstrates that on out-of-cache inputs on an Intel Skylake-X processor the new Two-Pass algorithm outperforms the traditional Three-Pass algorithm by up to 28% in AVX512 implementation, and by up to 18% in AVX2 implementation. The proposed Two-Pass algorithm also outperforms the traditional Three-Pass algorithm on Intel Broadwell and AMD Zen 2 processors. To foster reproducibility, we released an open-source implementation of the new Two-Pass Softmax algorithm and other experiments in this paper as a part of XNNPACK library at GitHub.com/google/XNNPACK.

  • 2 authors
·
Jan 13, 2020

Finite-Precision Symmetric Krylov Methods: Exact Rounding Examples, Block Paige Identities,and a Variable-Block Lanczos Model

Short-recurrence Krylov methods that are equivalent in exact arithmetic often diverge in floating-point arithmetic. To illustrate this, we provide an exactly representable two-cycle for steepest descent with a recursively updated residual. A complementary convergence theorem gives a sufficient condition under which the stored residual decreases geometrically. We then show that a second positive definite family yields different outcomes for a Hestenes--Stiefel Conjugate Gradient (CG) implementation and a direct Lanczos--Galerkin approach. CG finds the exact solution after four updates, whereas the two-step projected system becomes inconsistent. Under stated perturbation and transfer hypotheses, a common spectral enclosure gives comparable convergence bounds. For a dense, left-to-right evaluation order, we prove a sufficient precision bound for a prescribed backward error within n updates for an ntimes n matrix, together with a computable stopping test and specified exponent-range assumptions. We use polynomial estimates and numerical experiments to examine the trade-off between working precision and the number of CG iterations needed to achieve a prescribed backward error. We also compare results on inexact matrix-vector products and preconditioning with the frameworks of Paige and Greenbaum. For block Lanczos, we analyze Householder orthogonalization and singular-value truncation as the block size changes. Under componentwise and normwise error bounds, the computed coefficients satisfy a controlled local recurrence and an exact block Lanczos relation for a nearby symmetric problem in a larger space. A block form of Paige's identity bounds the overlap with a Ritz vector along its residual coordinate direction. An inter-block recurrence describes the evolution of overlap, and a Gram-matrix argument gives a count of additional nearby Ritz values.

  • 1 authors
·
Sep 7

Violation and Restoration of Probability Positivity in Perturbative Quantum Field Theory: From Quantum Mechanics to Quantum Chromodynamics

In quantum mechanics the modulus square of the wave function is the probability of an event --- positivity is self-evident. Quantum field theory corresponds to quantum mechanics one-to-one: the wave function corresponds to the matrix element, so the probability of a process should be the modulus square of the matrix element, positive by construction. In the founding era of perturbative quantum field theory, however, Feynman, Schwinger and Tomonaga treated inclusive processes in quantum electrodynamics, where the truncation of the squared amplitude was forced by infrared cancellations and rendered harmless by the small coupling αsimeq1/137. Carried over to exclusive processes in quantum chromodynamics, where the coupling is large, this practice produced negative decay and production rates already at NLO, persisting at NNLO. We point out that for exclusive processes, whose initial and final states are colorless for QCD and electrically neutral for QED, the infrared divergences cancel amplitude by amplitude and the KLN constraint is absent, so the complete modulus square of the truncated amplitude is the proper, manifestly positive definition of the probability. We formulate amplitude-level NRQCD factorization as the systematic prescription that restores positivity, show that every amplitude-level truncated observable admits the effective representation Γ^{amp}=Γ_{LO}bigl|1+α_sπ(c_1+ic_2)+α_s^2{π^2}(c_3+ic_4)bigr|^2, and demonstrate, with the complete NNLO QCD corrections to J/ψto3γ, Υto3γ, e^+e^-to J/ψ+J/ψ and the eight exclusive charmonium production channels at B factories, that the prescription yields positive and better-converging predictions.

  • 4 authors
·
Oct 2

Post-Grokking Collapse at the Representation-Readout Interface in Muon-Trained Transformers

Under the standard split, Muon gets hidden matrices and AdamW embeddings/output head. Muon groks modular addition faster, but its solutions do not hold. All nine configurations on (a+b) bmod 113 grok and later lose generalization. Across five seeds the selected AdamW reference falls below threshold on four, reaching 27.59%. Instability persists across two moduli, two widths, two training fractions, subtraction, and depth. The failure arises at the representation-readout interface, identified only jointly up to an invertible map unselected by the loss. After solving the training set, the gradient falls to order 10^{-6} and the optimizers respond differently: step-size elasticity is -0.03 for Muon versus +1.5 for AdamW, and the Muon group moves 8.0 times faster per parameter. From bit-identical states, freezing either group prevents failure. Freezing embeddings/readout removes it in five runs over 451,400 post-grokking steps and five paired seeds: unfrozen arms record 137-321 sub-threshold evaluations, frozen arms none. Removing Muon's normalization and orthogonalization is no substitute: it collapses representation from 326 effective conjugate pairs to 4, shows no recurrent collapse, and fails terminally. Fourier filtering separates circuit failure from masking. Across 43 checkpoints over five seeds and three regimes, the task-aligned family reaches exactly 100% alone. In circuit failure it no longer solves the task; in masking it remains perfect while the full model reaches 45.85%, giving a positive margin on every example, including errors, but being outvoted by a near-equal adversarial remainder. Rescaling it restores 99.9%; grokking is the same condition resolving upward. The task selects the family, swapping (k,k) for (k,-k) under subtraction. Across an abrupt collapse, standard Fourier support is unchanged and the power-distribution cosine remains 0.9899.

  • 4 authors
·
Aug 6

Power-SMC: Low-Latency Sequence-Level Power Sampling for Training-Free LLM Reasoning

Many recent reasoning gains in large language models can be explained as distribution sharpening: biasing generation toward high-likelihood trajectories already supported by the pretrained model, rather than modifying its weights. A natural formalization is the sequence-level power distribution π_α(ymid x)propto p_θ(ymid x)^α (α>1), which concentrates mass on whole sequences instead of adjusting token-level temperature. Prior work shows that Metropolis--Hastings (MH) sampling from this distribution recovers strong reasoning performance, but at order-of-magnitude inference slowdowns. We introduce Power-SMC, a training-free Sequential Monte Carlo scheme that targets the same objective while remaining close to standard decoding latency. Power-SMC advances a small particle set in parallel, corrects importance weights token-by-token, and resamples when necessary, all within a single GPU-friendly batched decode. We prove that temperature τ=1/α is the unique prefix-only proposal minimizing incremental weight variance, interpret residual instability via prefix-conditioned Rényi entropies, and introduce an exponent-bridging schedule that improves particle stability without altering the target. On MATH500, Power-SMC matches or exceeds MH power sampling while reducing latency from 16--28times to 1.4--3.3times over baseline decoding. The code is available at https://github.com/ArminAzizi98/Power-SMC.

  • 5 authors
·
Mar 22

BATQuant: Outlier-resilient MXFP4 Quantization via Learnable Block-wise Optimization

Microscaling floating-point (MXFP) formats have emerged as a promising standard for deploying Multi-modal Large Language Models (MLLMs) and Large Language Models (LLMs) on modern accelerator architectures. However, existing Post-Training Quantization (PTQ) methods, particularly rotation-based techniques designed for integer formats, suffer from severe performance collapse when applied to MXFP4. Recent studies attribute this failure to a fundamental format mismatch: global orthogonal rotations inadvertently transfer outlier energy across quantization blocks, inducing new outliers that disrupt local block-wise scaling, while often creating bimodal activation distributions that underutilize the limited quantization range. To address these issues, we propose BATQuant (Block-wise Affine Transformation), which restricts transformations to align with MXFP granularity to prevent cross-block outlier propagation, while relaxing orthogonality constraints to optimize distribution shaping. To ensure parameter efficiency, we introduce Global and Private Kronecker (GPK) decomposition to effectively reduces storage and runtime overhead and incorporate Block-wise Learnable Clipping to suppress residual outliers. Extensive experiments on both MLLMs and LLMs demonstrate that BATQuant establishes new state-of-the-art results under aggressive W4A4KV16 configurations, recovering up to 96.43% of full-precision performance on multimodal benchmarks and clearly outperforming existing methods across diverse tasks.

  • 7 authors
·
Mar 16

The Asymptotic Form of Non-Global Logarithms, Black Disc Saturation, and Gluonic Deserts

We develop an asymptotic perturbation theory for the large logarithmic behavior of the non-linear integro-differential equation describing the soft correlations of QCD jet measurements, the Banfi-Marchesini-Smye (BMS) equation. This equation captures the late-time evolution of radiating color dipoles after a hard collision. This allows us to prove that at large values of the control variable (the non-global logarithm, a function of the infra-red energy scales associated with distinct hard jets in an event), the distribution has a gaussian tail. We compute the decay width analytically, giving a closed form expression, and find it to be jet geometry independent, up to the number of legs of the dipole in the active jet. Enabling the asymptotic expansion is the correct perturbative seed, where we perturb around an anzats encoding formally no real emissions, an intuition motivated by the buffer region found in jet dynamics. This must be supplemented with the correct application of the BFKL approximation to the BMS equation in collinear limits. Comparing to the asymptotics of the conformally related evolution equation encountered in small-x physics, the Balitisky-Kovchegov (BK) equation, we find that the asymptotic form of the non-global logarithms directly maps to the black-disc unitarity limit of the BK equation, despite the contrasting physical pictures. Indeed, we recover the equations of saturation physics in the final state dynamics of QCD.

  • 1 authors
·
Jan 10, 2017

Quantization Meets Reasoning: Exploring and Mitigating Degradation of Low-Bit LLMs in Mathematical Reasoning

Low-bit post-training quantization (PTQ) is a practical route to deploy reasoning-capable LLMs under tight memory and latency budgets, yet it can markedly impair mathematical reasoning (drops up to 69.81% in our harder settings). We address two deployment-critical questions with process-level precision: Where along a step-structured solution does degradation first arise? How to mitigate it while staying in the low-bit regime? Across widely used PTQ methods (AWQ, GPTQ, SmoothQuant), open-source model families (Qwen, LLaMA; 0.5--7B), and math reasoning benchmarks (GSM8K, MATH, AIME), we perform format-aligned chain-of-thought with step-aligned attribution and uncover two robust regularities: (i) PTQ disproportionately elevates method and execution errors relative to high-level conceptual mistakes; and (ii) failures emerge early, with the first vulnerable step flipping and cascading to the final answer. These regularities suggest a general intervention principle: restore local token-level margins exactly at the earliest failure frontier. We instantiate this principle as a lightweight measurerightarrowlocaterightarrowrestore loop that operates directly on the quantized model: detect the first faulty step, construct our "Silver Bullet" datasets, and apply small-scale supervised/preference tuning. In our settings, as few as 332 curated examples and 3--5 minutes of compute on a single GPU recover 4-bit weight math reasoning toward the full-precision baseline while preserving PTQ efficiency. Our framework is quantizer- and architecture-agnostic within the evaluated regimes, and turns low-bit degradation from a global accuracy problem into a local, reproducible process intervention.

  • 11 authors
·
Jan 19

Post-Training Quantization with Low-precision Minifloats and Integers on FPGAs

Post-Training Quantization (PTQ) is a powerful technique for model compression, reducing the precision of neural networks without additional training overhead. Recent works have investigated adopting 8-bit floating-point quantization (FP8) in the context of PTQ for model inference. However, the exploration of floating-point formats smaller than 8 bits and their comparison with integer quantization remains relatively limited. In this work, we present minifloats, which are reduced-precision floating-point formats capable of further reducing the memory footprint, latency, and energy cost of a model while approaching full-precision model accuracy. Our work presents a novel PTQ design-space exploration, comparing minifloat and integer quantization schemes across a range of 3 to 8 bits for both weights and activations. We examine the applicability of various PTQ techniques to minifloats, including weight equalization, bias correction, SmoothQuant, gradient-based learned rounding, and the GPTQ method. Our experiments validate the effectiveness of low-precision minifloats when compared to their integer counterparts across a spectrum of accuracy-precision trade-offs on a set of reference deep learning vision workloads. Finally, we evaluate our results against an FPGA-based hardware cost model, showing that integer quantization often remains the Pareto-optimal option, given its relatively smaller hardware resource footprint.

  • 7 authors
·
Nov 21, 2023

Self Consistent Thermal Resummation: A Case Study of the Phase Transition in 2HDM

An accurate description of the scalar potential at finite temperature is crucial for studying cosmological first-order phase transitions (FOPT) in the early Universe. At finite temperatures, a precise treatment of thermal resummations is essential, as bosonic fields encounter significant infrared issues that can compromise standard perturbative approaches. The Partial Dressing (or the tadpole resummation) method provides a self consistent resummation of higher order corrections, allowing the computation of thermal masses and the effective potential including the proper Boltzmann suppression factors and without relying on any high-temperature approximation. We systematically compare the Partial dressing resummation scheme results with the Parwani and Arnold Espinosa (AE) ones to investigate the thermal phase transition dynamics in the Two-Higgs-Doublet Model (2HDM). Our findings reveal that different resummation prescriptions can significantly alter the nature of the phase transition within the same region of parameter space, confirming the differences that have already been noticed between the Parwani and AE schemes. Notably, the more refined resummation prescription, the Partial Dressing scheme, does not support symmetry non-restoration in 2HDM at high temperatures observed using the AE prescription. Furthermore, we quantify the uncertainties in the stochastic gravitational wave (GW) spectrum from an FOPT due to variations in resummation methods, illustrating their role in shaping theoretical predictions for upcoming GW experiments. Finally, we discuss the capability of the High-Luminosity LHC and proposed GW experiments to probe the FOEWPT-favored region of the parameter space.

  • 3 authors
·
Apr 2, 2025

Certified Interface Aliases: Exact Collisions in Vision-Language Preprocessing, and When They Exist

Vision-language verifiers and routers must distinguish errors repairable by more reasoning from those caused by visual evidence never reaching the language model. This distinction lacks ground truth because annotators see full-resolution images while models receive preprocessed tensors. We introduce AliasForge to create cases where the relevant fact is provably absent from the interface. Fixed-point resampling makes the pre-rounding resize an exact integer linear map that can send nonzero integer perturbations to zero. Hiding a label-flipping perturbation there produces images with opposite step-correctness labels but bit-identical interface states. Every verifier therefore has the same output law on both members, giving pair-balanced accuracy exactly one half and zero gain from language-side repair. We prove that every fixed-point downscaler has such null vectors and bound their smallest size at the most common ratios, which rules out an 8-bit fit whenever the bound exceeds 255. From the resize configuration alone, a lattice criterion supplies realizable collisions and certifies their absence within the specified construction family. It resolves all 20 screened configurations, 17 as constructible and 3 as non-constructible. We construct certified pairs across three architectures and certify four additional processors, with zero decision-logit gap on all 18 scored pairs and none of the 18 controls. The pairs also screen routers that waste computation on re-attention or further reasoning. On natural items, per-item routing headroom exists, but no tested interface-only router improves over stopping. Our fiber ceiling bounds the headroom recoverable from the interface. Code: https://github.com/KurbanIntelligenceLab/aliasforge.

  • 4 authors
·
Sep 25

Specializing Smaller Language Models towards Multi-Step Reasoning

The surprising ability of Large Language Models (LLMs) to perform well on complex reasoning with only few-shot chain-of-thought prompts is believed to emerge only in very large-scale models (100+ billion parameters). We show that such abilities can, in fact, be distilled down from GPT-3.5 (ge 175B) to T5 variants (le 11B). We propose model specialization, to specialize the model's ability towards a target task. The hypothesis is that large models (commonly viewed as larger than 100B) have strong modeling power, but are spread on a large spectrum of tasks. Small models (commonly viewed as smaller than 10B) have limited model capacity, but if we concentrate their capacity on a specific target task, the model can achieve a decent improved performance. We use multi-step math reasoning as our testbed because it is a very typical emergent ability. We show two important aspects of model abilities: (1). there exists a very complex balance/ tradeoff between language models' multi-dimensional abilities; (2). by paying the price of decreased generic ability, we can clearly lift up the scaling curve of models smaller than 10B towards a specialized multi-step math reasoning ability. We further give comprehensive discussions about important design choices for better generalization, including the tuning data format, the start model checkpoint, and a new model selection method. We hope our practice and discoveries can serve as an important attempt towards specialized smaller models in the new research paradigm set by LLMs.

  • 5 authors
·
Jan 30, 2023

Hadronic light-by-light contribution to (g-2)_μ from lattice QCD with SU(3) flavor symmetry

We perform a lattice QCD calculation of the hadronic light-by-light contribution to (g-2)_μ at the SU(3) flavor-symmetric point m_π=m_Ksimeq 420,MeV. The representation used is based on coordinate-space perturbation theory, with all QED elements of the relevant Feynman diagrams implemented in continuum, infinite Euclidean space. As a consequence, the effect of using finite lattices to evaluate the QCD four-point function of the electromagnetic current is exponentially suppressed. Thanks to the SU(3)-flavor symmetry, only two topologies of diagrams contribute, the fully connected and the leading disconnected. We show the equivalence in the continuum limit of two methods of computing the connected contribution, and introduce a sparse-grid technique for computing the disconnected contribution. Thanks to our previous calculation of the pion transition form factor, we are able to correct for the residual finite-size effects and extend the tail of the integrand. We test our understanding of finite-size effects by using gauge ensembles differing only by their volume. After a continuum extrapolation based on four lattice spacings, we obtain a_μ^{rm hlbl} = (65.4pm 4.9 pm 6.6)times 10^{-11}, where the first error results from the uncertainties on the individual gauge ensembles and the second is the systematic error of the continuum extrapolation. Finally, we estimate how this value will change as the light-quark masses are lowered to their physical values.

  • 5 authors
·
Jul 12, 2020

Resonance expansions and local-energy decay estimates for Dirac operators

We study resonance expansions and localised long-time dynamics for three-dimensional semiclassical Dirac operators. For smooth Hermitian matrix-valued perturbations which are analytic outside a compact set, we first obtain exponential cut-off resolvent bounds away from the resonance set and polynomial bounds in thin resonance-free rectangles adjacent to the real axis. Combining these estimates with a local Oc(h^{-3}) upper bound on the number of resonances, a pigeonhole selection of admissible contours, almost-analytic functional calculus, and a Cauchy--Green deformation, we derive resonance expansions for spectrally localised propagators. Positive-energy resonances contribute for large positive times, whereas negative-energy resonances contribute for large negative times. We then specialise to mass-type perturbations mbfβV(x) in a nontrapping energy window. Using the logarithmic resonance-free region established in our earlier work together with a quantitative FBI-transform/escape-function argument, we obtain a polynomial bound for the continued cut-off resolvent and deduce rapid local-energy decay. We subsequently refine this polynomial estimate by a finite-time propagation argument in the undistorted region. Introducing the maximal positive-sheet connection time T_χ associated with the spatial cutoff, we prove a geometric continued-resolvent estimate and, for every fixed M below the resonance-free depth constant, derive the explicit local-energy decay threshold T_N>T_χ+(N+1)/M. The same analysis gives a rigorous microlocal obstruction to a uniform [hlog(1/h)]^{-1} bound for the full distorted resolvent and identifies a finite-flight-time amplification mechanism for the sandwiched continued resolvent at logarithmic depth.

  • 2 authors
·
Sep 30

Accurate Block Quantization in LLMs with Outliers

The demand for inference on extremely large scale LLMs has seen enormous growth in the recent months. It made evident the colossal shortage of dedicated hardware capable of efficient and fast processing of the involved compute and memory movement. The problem is aggravated by the exploding raise in the lengths of the sequences being processed, since those require efficient on-chip storage of the KV-cache of size proportional to the sequence length. To make the required compute feasible and fit the involved data into available memory, numerous quantization techniques have been proposed that allow accurate quantization for both weights and activations. One of the main recent breakthroughs in this direction was introduction of the family of Block Floating Point (BFP) formats characterized by a block of mantissas with a shared scale factor. These enable memory- power-, and compute- efficient hardware support of the tensor operations and provide extremely good quantization accuracy. The main issues preventing widespread application of block formats is caused by the presence of outliers in weights and activations since those affect the accuracy of the other values in the same block. In this paper, we focus on the most critical problem of limited KV-cache storage. We propose a novel approach enabling usage of low precision BFP formats without compromising the resulting model accuracy. We exploit the common channel-wise patterns exhibited by the outliers to rearrange them in such a way, that their quantization quality is significantly improved. The methodology yields 2x savings in the memory footprint without significant degradation of the model's accuracy. Importantly, the rearrangement of channels happens at the compile time and thus has no impact on the inference latency.

  • 2 authors
·
Mar 29, 2024

Scaling Laws for Floating Point Quantization Training

Low-precision training is considered an effective strategy for reducing both training and downstream inference costs. Previous scaling laws for precision mainly focus on integer quantization, which pay less attention to the constituents in floating-point quantization and thus cannot well fit the LLM losses in this scenario. In contrast, while floating-point quantization training is more commonly implemented in production, the research on it has been relatively superficial. In this paper, we thoroughly explore the effects of floating-point quantization targets, exponent bits, mantissa bits, and the calculation granularity of the scaling factor in floating-point quantization training performance of LLM models. While presenting an accurate floating-point quantization unified scaling law, we also provide valuable suggestions for the community: (1) Exponent bits contribute slightly more to the model performance than mantissa bits. We provide the optimal exponent-mantissa bit ratio for different bit numbers, which is available for future reference by hardware manufacturers; (2) We discover the formation of the critical data size in low-precision LLM training. Too much training data exceeding the critical data size will inversely bring in degradation of LLM performance; (3) The optimal floating-point quantization precision is directly proportional to the computational power, but within a wide computational power range, we estimate that the best cost-performance precision lies between 4-8 bits.

  • 16 authors
·
Jan 4, 2025 2

Reliable Hybrid Neural Surrogates for Multidimensional Grids: Application to Double Parton Distributions

The conventional grid-based approach used for storing and evaluating ordinary parton distribution functions (PDFs), as implemented for example in LHAPDF, becomes much more demanding for double parton distributions (DPDs). While a collinear PDF depends on one longitudinal momentum fraction and one factorization scale, an unequal-scale DPD depends on two momentum fractions and two independent factorization scales for every parton-flavor combination. Direct tabulation of this four-dimensional dependence therefore requires considerably more disk space and runtime memory. In this work, we develop a hybrid neural-network method for compact storage and fast evaluation of y-independent unequal-scale DPDs. The network compresses the reference grid by reproducing most of its values, while the original values are stored only at points where the neural prediction does not reach the required accuracy. In this way, the neural model captures the bulk of the grid, with a sparse table covering the remaining difficult points. For the GS09-based dense grid studied here, only 0.694% of the active flavor values need to be stored in the sparse table. Compared with the compressed dense grid, the hybrid method reduces the disk footprint by a factor of 10.6, peak memory use by a factor of 31.6, and initialization time by about a factor of 10.6. At the same time, its evaluation throughput reaches about 85% of the dense-grid rate. The method is implemented natively in C++ within PDFxTMDLib and requires neither Python nor PyTorch at runtime. The hybrid scheme therefore offers much lower memory and startup costs, with only a modest reduction in evaluation speed.

  • 2 authors
·
Sep 11

On Penalty Methods for Nonconvex Bilevel Optimization and First-Order Stochastic Approximation

In this work, we study first-order algorithms for solving Bilevel Optimization (BO) where the objective functions are smooth but possibly nonconvex in both levels and the variables are restricted to closed convex sets. As a first step, we study the landscape of BO through the lens of penalty methods, in which the upper- and lower-level objectives are combined in a weighted sum with penalty parameter sigma > 0. In particular, we establish a strong connection between the penalty function and the hyper-objective by explicitly characterizing the conditions under which the values and derivatives of the two must be O(sigma)-close. A by-product of our analysis is the explicit formula for the gradient of hyper-objective when the lower-level problem has multiple solutions under minimal conditions, which could be of independent interest. Next, viewing the penalty formulation as O(sigma)-approximation of the original BO, we propose first-order algorithms that find an epsilon-stationary solution by optimizing the penalty formulation with sigma = O(epsilon). When the perturbed lower-level problem uniformly satisfies the small-error proximal error-bound (EB) condition, we propose a first-order algorithm that converges to an epsilon-stationary point of the penalty function, using in total O(epsilon^{-3}) and O(epsilon^{-7}) accesses to first-order (stochastic) gradient oracles when the oracle is deterministic and oracles are noisy, respectively. Under an additional assumption on stochastic oracles, we show that the algorithm can be implemented in a fully {\it single-loop} manner, i.e., with O(1) samples per iteration, and achieves the improved oracle-complexity of O(epsilon^{-3}) and O(epsilon^{-5}), respectively.

  • 4 authors
·
Sep 4, 2023

Towards a Principled Muon under μP: Ensuring Spectral Conditions throughout Training

The μ-parameterization (μP) provides a principled foundation for large language model (LLM) training by prescribing width-independent learning dynamics, which in turn enables predictable scaling behavior and robust hyperparameter transfer across model sizes. A central requirement of μP is the satisfaction of certain spectral conditions on weight matrices, which ensure consistent feature learning and optimization behavior as model width grows. While these conditions are well understood in theory, guaranteeing their validity in practical training for matrix-based optimizers such as Muon is still under studied. Existing works that study Muon under μP exhibit important limitations: they either do not ensure that the spectral conditions hold throughout the entire training horizon, or require repeated spectral normalization (or Newton-Schulz iterations) applied to both weights and updates, leading to significant computational overhead and reduced practicality. In this work, we show how to reliably guarantee the spectral conditions required by μP for Muon during the entire training process. Our key insight is that for moderately large models, maintaining spectral control at the level of optimizer updates alone is sufficient to preserve μP-compatible scaling, eliminating the need for explicit spectral normalization of the weights. Based on this principle, we develop a variant of Muon, namely Muon++, that satisfies spectral condition throughout the training process. Our results bridge the gap between the theoretical promises of μP and the practical deployment of matrix-based optimizers in long-horizon training. We also take the first step towards an adaptive spectral condition by incorporating data-dependent effects, making it better suited for long-horizon LLM training.

  • 1 authors
·
Jan 3

Spectral Scaling Laws of Muon

Orthonormalized update rules have rapidly become a leading choice of optimizer for training large language models, with recent open-source state-of-the-art models adopting Muon. To keep these updates tractable, Muon performs the orthonormalization with the Newton--Schulz (NS) iteration. Since NS is only approximate, directions with small singular values fail to be orthonormalized. In Muon, NS is applied to the momentum matrix at every step, yet little is known about how the singular value spectrum of these momentum matrices behaves during training, or how that behavior changes with model size. We present the first systematic study of this question. Tracking singular value quantiles of the momentum buffer across layers in models ranging from 77M to 2.8B parameters, we observe a consistent picture: after a short burn-in, the quantiles stabilize at a value determined by the layer type and model size. These stabilization values follow remarkably clean power laws in model size, with layer-dependent exponents. Layers up to mid-late depth scale very mildly with model size M (around M^{-0.25}), so the standard 5-step NS configuration used at academic scale will continue to orthonormalize them at much larger scales. Some of the late layers, however, scale much more aggressively (up to M^{-0.96}) and will fall into the NS failure regime at frontier scale unless one uses more NS iterations or better-tuned coefficients. NS iterations are computationally expensive at scale; our laws give practitioners a principled, layer-aware recipe for choosing the minimum NS configuration that still orthonormalizes the directions that matter -- avoiding unnecessary computation without sacrificing update quality.

  • 3 authors
·
Jun 4

Diagnosing FP4 inference: a layer-wise and block-wise sensitivity analysis of NVFP4 and MXFP4

Quantization addresses the high resource demand for large language models (LLMs) by alleviating memory pressure and bandwidth congestion and providing significantly scaled compute power with a tolerable impact on accuracy. Four-bit floating point (FP4), the lowest-precision format that preserves essential numerical properties such as exponent and sign, has begun to be adopted in cutting-edge architectures, including Blackwell and AMD CDNA, to support LLM quantization and reduce deployment costs. Although aggressive quantization can yield efficiency gains, the quantization sensitivity of within-transformer layers and whether these sensitivities generalize across existing FP4 formats and model scales remain underexplored. To elucidate quantization sensitivity, this study conducts a systematic analysis of two FP4 formats, MXFP4 and NVFP4, across three Qwen2.5 model scales (0.5B, 7B, and 14B), using controlled component-wise and block-wise isolation methodologies. We observe that MLP up- and down-projection layers consistently dominate in terms of sensitivity, while gate and attention projections are moderately and substantially less sensitive to FP4 quantization, respectively. We further find that sensitivity does not universally localize to the final blocks, but early blocks can be highly sensitive, particularly under MXFP4. Our results provide a diagnostic characterization of the inference behavior of FP4 across components, depths, and FP4 formats.

  • 3 authors
·
Mar 4

SmallThinker: A Family of Efficient Large Language Models Natively Trained for Local Deployment

While frontier large language models (LLMs) continue to push capability boundaries, their deployment remains confined to GPU-powered cloud infrastructure. We challenge this paradigm with SmallThinker, a family of LLMs natively designed - not adapted - for the unique constraints of local devices: weak computational power, limited memory, and slow storage. Unlike traditional approaches that mainly compress existing models built for clouds, we architect SmallThinker from the ground up to thrive within these limitations. Our innovation lies in a deployment-aware architecture that transforms constraints into design principles. First, We introduce a two-level sparse structure combining fine-grained Mixture-of-Experts (MoE) with sparse feed-forward networks, drastically reducing computational demands without sacrificing model capacity. Second, to conquer the I/O bottleneck of slow storage, we design a pre-attention router that enables our co-designed inference engine to prefetch expert parameters from storage while computing attention, effectively hiding storage latency that would otherwise cripple on-device inference. Third, for memory efficiency, we utilize NoPE-RoPE hybrid sparse attention mechanism to slash KV cache requirements. We release SmallThinker-4B-A0.6B and SmallThinker-21B-A3B, which achieve state-of-the-art performance scores and even outperform larger LLMs. Remarkably, our co-designed system mostly eliminates the need for expensive GPU hardware: with Q4_0 quantization, both models exceed 20 tokens/s on ordinary consumer CPUs, while consuming only 1GB and 8GB of memory respectively. SmallThinker is publicly available at hf.co/PowerInfer/SmallThinker-4BA0.6B-Instruct and hf.co/PowerInfer/SmallThinker-21BA3B-Instruct.

  • 14 authors
·
Jul 28, 2025 2

Making Small Language Models Efficient Reasoners: Intervention, Supervision, Reinforcement

Recent research enhances language model reasoning by scaling test-time compute via longer chain-of-thought traces. This often improves accuracy but also introduces redundancy and high computational cost, especially for small language models distilled with supervised fine-tuning (SFT). In this work, we propose new algorithms to improve token-efficient reasoning with small-scale models by effectively trading off accuracy and computation. We first show that the post-SFT model fails to determine the optimal stopping point of the reasoning process, resulting in verbose and repetitive outputs. Verbosity also significantly varies across wrong vs correct responses. To address these issues, we propose two solutions: (1) Temperature scaling (TS) to control the stopping point for the thinking phase and thereby trace length, and (2) TLDR: a length-regularized reinforcement learning method based on GRPO that facilitates multi-level trace length control (e.g. short, medium, long reasoning). Experiments on four reasoning benchmarks, MATH500, AMC, AIME24 and OlympiadBench, demonstrate that TS is highly effective compared to s1's budget forcing approach and TLDR significantly improves token efficiency by about 50% with minimal to no accuracy loss over the SFT baseline. Moreover, TLDR also facilitates flexible control over the response length, offering a practical and effective solution for token-efficient reasoning in small models. Ultimately, our work reveals the importance of stopping time control, highlights shortcomings of pure SFT, and provides effective algorithmic recipes.

  • 6 authors
·
May 12, 2025

LUT Tensor Core: Lookup Table Enables Efficient Low-Bit LLM Inference Acceleration

As large language model (LLM) inference demands ever-greater resources, there is a rapid growing trend of using low-bit weights to shrink memory usage and boost inference efficiency. However, these low-bit LLMs introduce the need for mixed-precision matrix multiplication (mpGEMM), which is a crucial yet under-explored operation that involves multiplying lower-precision weights with higher-precision activations. Unfortunately, current hardware does not natively support mpGEMM, resulting in indirect and inefficient dequantization-based implementations. To address the mpGEMM requirements in low-bit LLMs, we explored the lookup table (LUT)-based approach for mpGEMM. However, a conventional LUT implementation falls short of its potential. To fully harness the power of LUT-based mpGEMM, we introduce LUT Tensor Core, a software-hardware co-design optimized for low-bit LLM inference. Specifically, we introduce software-based operator fusion and table symmetrization techniques to optimize table precompute and table storage, respectively. Then, LUT Tensor Core proposes the hardware design featuring an elongated tiling shape design to enhance table reuse and a bit-serial design to support various precision combinations in mpGEMM. Moreover, we design an end-to-end compilation stack with new instructions for LUT-based mpGEMM, enabling efficient LLM compilation and optimizations. The evaluation on low-bit LLMs (e.g., BitNet, LLAMA) shows that LUT Tensor Core achieves more than a magnitude of improvements on both compute density and energy efficiency.

  • 11 authors
·
Aug 12, 2024

DuQuant++: Fine-grained Rotation Enhances Microscaling FP4 Quantization

The MXFP4 microscaling format, which partitions tensors into blocks of 32 elements sharing an E8M0 scaling factor, has emerged as a promising substrate for efficient LLM inference, backed by native hardware support on NVIDIA Blackwell Tensor Cores. However, activation outliers pose a unique challenge under this format: a single outlier inflates the shared block scale, compressing the effective dynamic range of the remaining elements and causing significant quantization error. Existing rotation-based remedies, including randomized Hadamard and learnable rotations, are data-agnostic and therefore unable to specifically target the channels where outliers concentrate. We propose DuQuant++, which adapts the outlier-aware fine-grained rotation of DuQuant to the MXFP4 format by aligning the rotation block size with the microscaling group size (B{=}32). Because each MXFP4 group possesses an independent scaling factor, the cross-block variance issue that necessitates dual rotations and a zigzag permutation in the original DuQuant becomes irrelevant, enabling DuQuant++ to replace the entire pipeline with a single outlier-aware rotation, which halves the online rotation cost while simultaneously smoothing the weight distribution. Extensive experiments on the LLaMA-3 family under MXFP4 W4A4 quantization show that DuQuant++ consistently achieves state-of-the-art performance. Our code is available at https://github.com/Hsu1023/DuQuant-v2.

  • 10 authors
·
Apr 20

Combinatorial Residual Network: a decay-chain-aware classifier without explicit jet assignment

Final states with several jets from the decays of heavy particles pose a combinatorial problem, since the jets must be assigned, at least implicitly, to their parent particles. We describe the Combinatorial Residual Network (CoReNet), a classifier that encodes the assumed decay chain of the final state in its architecture. CoReNet builds its event representation level by level along the decay hierarchy, evaluates every jet assignment hypothesis with weights shared across objects, and combines the hypotheses with learned weights using residual networks. The exchange symmetries of the decay are built into the construction, the size of the network does not depend on the number of hypotheses, and the network is trained with the classification loss alone, without generator-level jet assignments. The architecture was developed for the bbbb final state and has been used in several CMS searches. On fast-simulation samples of Higgs boson pair production in the bbbb final state against QCD multijet production, CoReNet with 1508 trainable parameters performs well above kinematic baselines and trains in minutes on a single GPU. Its hypothesis weights select the truth-matched jet pairing in most of the signal events in which it is defined, although no assignment target is used in training. Since only the encoded decay chain is specific to the final state, the construction carries over to other topologies, which we test with HH to bbW^+W^- against semileptonic tt. There, encoding the decay chain of the background as well as that of the signal further improves the classification, at a cost of about 10^3 parameters. In both final states its performance is comparable to that of a state-of-the-art transformer-based network more than two orders of magnitude larger. The implementation is publicly available at https://github.com/cms-cmu/CoReNet.

  • 8 authors
·
Oct 28

AutoNumerics-Zero: Automated Discovery of State-of-the-Art Mathematical Functions

Computers calculate transcendental functions by approximating them through the composition of a few limited-precision instructions. For example, an exponential can be calculated with a Taylor series. These approximation methods were developed over the centuries by mathematicians, who emphasized the attainability of arbitrary precision. Computers, however, operate on few limited precision types, such as the popular float32. In this study, we show that when aiming for limited precision, existing approximation methods can be outperformed by programs automatically discovered from scratch by a simple evolutionary algorithm. In particular, over real numbers, our method can approximate the exponential function reaching orders of magnitude more precision for a given number of operations when compared to previous approaches. More practically, over float32 numbers and constrained to less than 1 ULP of error, the same method attains a speedup over baselines by generating code that triggers better XLA/LLVM compilation paths. In other words, in both cases, evolution searched a vast space of possible programs, without knowledge of mathematics, to discover previously unknown optimized approximations to high precision, for the first time. We also give evidence that these results extend beyond the exponential. The ubiquity of transcendental functions suggests that our method has the potential to reduce the cost of scientific computing applications.

  • 10 authors
·
Dec 13, 2023

HiFloat4 Format for End-To-End Reinforcement Learning Post-Training of Large Language Models

We present, to our knowledge, the first end-to-end FP4 RL post-training, in which both the rollout and training policies, including their forward and backward passes, operate at 4-bit precision. A systematic study reveals that the dominant source of degradation in FP4 RL is not training-side quantization error but rollout activation quantization: outliers stretch the dynamic range so far that a large number of activation values underflow to zero under FP4. Counterintuitively, restoring the training policy to higher precision while keeping the rollout in FP4 makes accuracy worse than full FP4 baseline, exposing rollout-training mismatch as the principal failure mode and ruling out standard pretraining-style fixes. We address this with Rollout Residual Quantization (Rollout-ResQ): a single residual correction term constrained to a hardware-friendly sparsity pattern, added only to the FP4 rollout matmul -- a lightweight correction that recovers most of the precision lost to outlier-driven underflow without inflating the rollout's compute footprint. On Qwen2.5-3B and Qwen2.5-Math-7B, Rollout-ResQ paired with the HiFloat4 (HiF4) format -- whose three-level hierarchical scaling preserves resolution under FP4's tight 4-bit budget -- closes the accuracy gap to BF16 from 4.9% to 1.1%, bringing fully quantized FP4 RL within striking distance of full precision. Applied to the open-standard MXFP4, the same recipe narrows the gap from 13.6% to 5.3%, revealing that FP4 format choice is a key factor that determines the ceiling on recoverable accuracy. Together, these results establish HiF4 as the enabling format for end-to-end FP4 RL post-training, and Rollout-ResQ as the activation-side mechanism that makes the gap to BF16 closable.

  • 13 authors
·
Jul 28

BS-Diff: Effective Bone Suppression Using Conditional Diffusion Models from Chest X-Ray Images

Chest X-rays (CXRs) are commonly utilized as a low-dose modality for lung screening. Nonetheless, the efficacy of CXRs is somewhat impeded, given that approximately 75% of the lung area overlaps with bone, which in turn hampers the detection and diagnosis of diseases. As a remedial measure, bone suppression techniques have been introduced. The current dual-energy subtraction imaging technique in the clinic requires costly equipment and subjects being exposed to high radiation. To circumvent these issues, deep learning-based image generation algorithms have been proposed. However, existing methods fall short in terms of producing high-quality images and capturing texture details, particularly with pulmonary vessels. To address these issues, this paper proposes a new bone suppression framework, termed BS-Diff, that comprises a conditional diffusion model equipped with a U-Net architecture and a simple enhancement module to incorporate an autoencoder. Our proposed network cannot only generate soft tissue images with a high bone suppression rate but also possesses the capability to capture fine image details. Additionally, we compiled the largest dataset since 2010, including data from 120 patients with high-definition, high-resolution paired CXRs and soft tissue images collected by our affiliated hospital. Extensive experiments, comparative analyses, ablation studies, and clinical evaluations indicate that the proposed BS-Diff outperforms several bone-suppression models across multiple metrics. Our code can be accessed at https://github.com/Benny0323/BS-Diff.

  • 11 authors
·
Nov 26, 2023

Chebyshev-Exact Acceleration under Hessian Variation, II: Computer-Assisted Variational Lower Bound

We study two-step recurrences with positive step sizes and nonnegative momentum coefficients whose terminal residual is the Chebyshev minimax polynomial on a prescribed spectral interval [μ,L]. These recurrences have the same terminal error on a fixed quadratic, but their first-order responses to stepwise Hessian perturbations can differ. We prove that the sine-Jacobi recurrence of Part I is asymptotically optimal for this response norm within a factor of 1.000004, uniformly over 0<μ<L. Every terminal-exact recurrence satisfies A_Nge(2c_{cert}-o(1))N^{3/2}ε_N^star/(L-μ) with c_{cert}>1.14268353624, whereas the sine-Jacobi recurrence attains the constant 2c_{sin} with c_{sin}<1.14269218. The proof reduces the gain to the diagonal energy of a Jacobi Green matrix. A centering lift represents this matrix by an exponential kernel; packing its diagonal into a density on the line preserves the energy and controls the change in the Birman-Schwinger spectrum. A calibrated identity gives a lower bound using the ground parameter and one Fredholm determinant. Two further determinants and a trace observation improve the bound through a pointwise inequality on an explicit compact state region. One rational certificate verifies this inequality by interval arithmetic. A second certificate constructs a density satisfying the selected observations and both normalizations with energy below the sine value. Finally, no C^1 function of finitely many observations of the specified kinds gives a locally sharp lower bound at the sine density.

  • 2 authors
·
Oct 5

XQuant: Breaking the Memory Wall for LLM Inference with KV Cache Rematerialization

Although LLM inference has emerged as a critical workload for many downstream applications, efficiently inferring LLMs is challenging due to the substantial memory footprint and bandwidth requirements. In parallel, compute capabilities have steadily outpaced both memory capacity and bandwidth over the last few decades, a trend that remains evident in modern GPU hardware and exacerbates the challenge of LLM inference. As such, new algorithms are emerging that trade increased computation for reduced memory operations. To that end, we present XQuant, which takes advantage of this trend, enabling an order-of-magnitude reduction in memory consumption through low-bit quantization with substantial accuracy benefits relative to state-of-the-art KV cache quantization methods. We accomplish this by quantizing and caching the layer input activations X, instead of using standard KV caching, and then rematerializing the Keys and Values on-the-fly during inference. This results in an immediate 2times memory savings compared to KV caching. By applying XQuant, we achieve up to sim 7.7times memory savings with <0.1 perplexity degradation compared to the FP16 baseline. Furthermore, our approach leverages the fact that X values are similar across layers. Building on this observation, we introduce XQuant-CL, which exploits the cross-layer similarity in the X embeddings for extreme compression. Across different models, XQuant-CL attains up to 10times memory savings relative to the FP16 baseline with only 0.01 perplexity degradation, and 12.5times memory savings with only 0.1 perplexity degradation. XQuant exploits the rapidly increasing compute capabilities of hardware platforms to eliminate the memory bottleneck, while surpassing state-of-the-art KV cache quantization methods and achieving near-FP16 accuracy across a wide range of models.

  • 10 authors
·
Aug 14, 2025 2

Muon with Nesterov Momentum: Heavy-Tailed Noise and (Randomized) Inexact Polar Decomposition

Most first-order optimizers treat matrix-valued parameters as vectors, ignoring the intrinsic geometry of hidden-layer weights in neural networks. Muon addresses this mismatch by updating along the polar factor of a momentum matrix, but its theoretical understanding has lagged behind practice. In particular, practical implementations incorporate Nesterov momentum, compute the polar factor only approximately, and operate with stochastic gradients that may be heavy-tailed. We close this gap by developing a convergence theory for Muon with Nesterov momentum and inexact polar decomposition in non-convex matrix optimization under heavy-tailed noise. Our analysis builds on a unified framework for inexact polar decomposition that captures practical iterative approximations such as Newton-Schulz and quantifies how their errors propagate through the optimization dynamics. Under this framework, we establish an optimal iteration and sample complexity of O left(varepsilon^{-(3α-2){(α-1)}} right) for finding an varepsilon-stationary point, where αin(1,2] denotes the heavy-tail index. For the inexact-polar setting with σ_1=0, we also provide guarantees that do not require prior knowledge of α. We analyze a randomized low-rank polar decomposition that is substantially more efficient than full-space methods while remaining compatible with our theory. Numerical experiments further demonstrate the effectiveness of the proposed inexact and randomized variants.

  • 5 authors
·
May 6 1

Wiring Beats Blending: What Transfers Between Transformer Sizes -- and What Doesn't

Model families train every size from scratch. Can a pretrained large model be converted into a smaller sibling? We characterize the 1.4B->410M conversion in the Pythia family end-to-end: (i) representations align strongly across sizes (ridge R^2=0.84) while parameters align weakly; (ii) dense weight projection is functionally destructive -- provably not an assembly artifact -- because basis mixing breaks rotary, per-head, GELU, and LayerNorm structure; (iii) after the best-fit linear operator, weight residuals are statistically indistinguishable from noise under shuffle controls; (iv) conversion value therefore lives in initialization. In matched-budget continued pre-training we decompose conversion into two independent levers -- least-squares compensation (function: best zero-shot) and variance-preserving rescale (dynamics: best endpoints). Compensation is a token-efficient, low-budget win rather than a universal one: at 30M tokens it beats the strongest subcloning variant on both a width-reduced pair (84.0 +/- 1.8 vs. 89.7 +/- 3.7, 3/3 seeds) and a held-out depth-reduced pair (109.3 vs. 117.9, 3/3 seeds), reaching a given quality with fewer tokens; at a 33x larger budget the two converge to parity (40.0 vs. 40.0), both far ahead of from-scratch, which transfer initialization always beats -- by up to 18x at low budget, the margin narrowing at convergence and at the largest scale. We further map the method's boundary: at ~5x the donor scale (6.9B->1.4B) stacking both levers over-corrects, which we trace to ill-conditioning of the compensation solve at large width, pointing to dimension-aware regularization as the fix. Code, checkpoints, and the frozen evaluation corpus are released.

  • 1 authors
·
Aug 2

RMNP: Row-Momentum Normalized Preconditioning for Scalable Matrix-Based Optimization

Preconditioned adaptive methods have gained significant attention for training deep neural networks, as they capture rich curvature information of the loss landscape. The central challenge in this field lies in balancing preconditioning effectiveness with computational efficiency of implementing the preconditioner. Among recent advances, Muon stands out by using Newton-Schulz iteration to obtain preconditioned updates without explicitly constructing the preconditioning matrix. Despite its advantages, the efficiency of Muon still leaves room for further improvement. In this paper, we introduce RMNP (Row Momentum Normalized Preconditioning), an optimizer that replaces Newton-Schulz iteration with a simple row-wise (d_{in}) ell_2 normalization operation, motivated by the empirically observed diagonal block structure of the Transformer layerwise Hessian. We empirically verified that orthogonalization and row-wise (on input dim) ell_2 normalization are asymptotically equivalent in the case of the transformer. This substitution reduces the per-iteration computational complexity from {O}(mncdotmin(m,n)) to {O}(mn) for an mtimes n weight matrix while maintaining comparable optimization performance. Theoretically, we establish convergence guarantees for RMNP in the non-convex setting that match recent results for Muon optimizers, achieving the minimax optimal complexity. Extensive experiments on large language model pretraining show that RMNP delivers competitive optimization performance compared with Muon while substantially reducing preconditioning wall-clock time. Our code is available at https://github.com/Dominator-Index/RMNP.

  • 7 authors
·
May 12

RISING a new framework for few-view tomographic image reconstruction with deep learning

This paper proposes a new two-step procedure for sparse-view tomographic image reconstruction. It is called RISING, since it combines an early-stopped Rapid Iterative Solver with a subsequent Iteration Network-based Gaining step. So far, regularized iterative methods have widely been used for X-ray computed tomography image reconstruction from low-sampled data, since they converge to a sparse solution in a suitable domain, as upheld by the Compressed Sensing theory. Unfortunately, their use is practically limited by their high computational cost which imposes to perform only a few iterations in the available time for clinical exams. Data-driven methods, using neural networks to post-process a coarse and noisy image obtained from geometrical algorithms, have been recently studied and appreciated for both their computational speed and accurate reconstructions. However, there is no evidence, neither theoretically nor numerically, that neural networks based algorithms solve the mathematical inverse problem modeling the tomographic reconstruction process. In our two-step approach, the first phase executes very few iterations of a regularized model-based algorithm whereas the second step completes the missing iterations by means of a neural network. The resulting hybrid deep-variational framework preserves the convergence properties of the iterative method and, at the same time, it exploits the computational speed and flexibility of a data-driven approach. Experiments performed on a simulated and a real data set confirm the numerical and visual accuracy of the reconstructed RISING images in short computational times.

  • 3 authors
·
Jan 24, 2022

An efficient Asymptotic-Preserving scheme for the Boltzmann mixture with disparate mass

In this paper, we develop and implement an efficient asymptotic-preserving (AP) scheme to solve the gas mixture of Boltzmann equations under the disparate mass scaling relevant to the so-called "epochal relaxation" phenomenon. The disparity in molecular masses, ranging across several orders of magnitude, leads to significant challenges in both the evaluation of collision operators and the designing of time-stepping schemes to capture the multi-scale nature of the dynamics. A direct implementation of the spectral method faces prohibitive computational costs as the mass ratio increases due to the need to resolve vastly different thermal velocities. Unlike [I. M. Gamba, S. Jin, and L. Liu, Commun. Math. Sci., 17 (2019), pp. 1257-1289], we propose an alternative approach based on proper truncation of asymptotic expansions of the collision operators, which significantly reduces the computational complexity and works well for small varepsilon. By incorporating the separation of three time scales in the model's relaxation process [P. Degond and B. Lucquin-Desreux, Math. Models Methods Appl. Sci., 6 (1996), pp. 405-436], we design an AP scheme that captures the specific dynamics of the disparate mass model while maintaining computational efficiency. Numerical experiments demonstrate the effectiveness of the proposed scheme in handling large mass ratios of heavy and light species, as well as capturing the epochal relaxation phenomenon.

  • 3 authors
·
Nov 20, 2024

Amplitude Encoding of Slater-Type Orbitals via Matrix Product States: Efficient State Preparation and Integral Evaluation on Quantum Hardware

Slater-type orbitals (STOs) provide the physically correct description of atomic wavefunctions but have been largely replaced by Gaussian-type orbitals in computational chemistry due to the lack of closed-form multi-center integrals. We present a systematic study of amplitude encoding of STOs on quantum computers using matrix product states (MPS). For one-dimensional orbital functions of the form p_d(x) e^{-ζx}, we derive analytical MPS constructions with constant bond dimension χ= d + 1, requiring O(n) classical and quantum resources for n-qubit registers with no grid sampling. We demonstrate a complete one-electron integral pipeline -- overlap, kinetic energy, and nuclear attraction -- in one dimension, validating the overlap and kinetic energy on IBM Heron processors at 5~qubits with 0.67\% hardware-induced error using Zero-Noise Extrapolation. In three dimensions, we compute multi-center overlap integrals between 1s and 2s orbitals in Cartesian coordinates with 0.02\% discretization error at 18~qubits. A systematic entanglement analysis reveals that the MPS bond dimension of three-dimensional STOs in Cartesian coordinates saturates with increasing grid resolution -- reaching sim138 for the hydrogen 1s orbital at 12~qubits per coordinate -- establishing bounded encoding complexity rather than the exponential scaling initially expected. The SVD truncation threshold provides a practical resource parameter, reducing the bond dimension to 39 at threshold 10^{-6} with negligible accuracy loss. These results map the entanglement landscape for amplitude encoding of atomic orbitals and establish MPS-based state preparation as a viable path toward exact STO basis sets on quantum computers.

  • 1 authors
·
Apr 28

Using a 4-megapixel hybrid photon counting detector for fast, lab-based nanoscale x-ray tomography

Hybrid photon counting detectors (HPCDs) have unlocked new capabilities for x-ray-based measurements at synchrotrons around the world in the last 30 years. By leveraging independently optimized sensor and readout layers, they offer high quantum efficiency (> 80 %), ultra-low dark counts, sub-pixel point-spread function, and high count rates (> 10^{6} counts per pixel per second). Furthermore, their small pixel size and large active area endow them with excellent coverage and resolution for both real-space and reciprocal space imaging. Here, we demonstrate that HPCDs are also well-suited for laboratory-based nanoscale x-ray tomography (nano-xCT). We perform nano-xCT on an integrated circuit fabricated at the 130-nm node and produce a 3D reconstruction with 40 times more photons collected 20 times faster than in this group's previous work, for an overall speedup of 800times. We review the technical considerations of using an HPCD for tabletop tomography. We quantify our reconstruction image quality using well-established metrics, including the modulation transfer function (MTF), Fourier shell correlation (FSC), and contrast-to-noise (CNR), to validate our choice of experimental parameters that provide sufficient resolution and imaging speed. Using these metrics, we determine that even under current experimental conditions, 160 nm wiring features are reconstructed at 75-80 nm spatial resolution.

  • 11 authors
·
Feb 10

Rounding in Preconditioner Space: Redesigning 4-bit AdamW Optimizer-State Quantization

Quantizing AdamW's optimizer states reduces persistent storage, but quantization errors propagate through the moment recurrences and perturb subsequent adaptive updates. We redesign 4-bit optimizer-state quantization for AdamW from the perspective of rounding space: the coordinate in which a quantizer chooses between adjacent reconstruction levels. For the second moment, a local analysis of the quantization cell adjacent to zero shows that small mean state error need not imply small mean preconditioner error at the next step. A one-dimensional quadratic construction further shows qualitatively different optimization dynamics under state-space and preconditioner-space rounding. These results motivate Zero-Inclusive Preconditioner-space Stochastic Rounding (ZIP-SR), which retains zero in the second-moment codebook and computes stochastic-rounding probabilities in preconditioner space. As a complementary route, Zero-Excluding EDEN calibration (ZE-EDEN) uses a zero-excluding second-moment codebook and rescales the quantized second-moment block to mitigate the preconditioner distortion caused by the positive quantization floor. Both configurations use 4-bit NormalFloat (NF4) for the first moment, with targeted stochastic rounding of the LM-head first moment during the final 10\% of training. Across GPT- and Llama-style pretraining experiments ranging from 130M to 2.7B parameters, both methods reduce TorchAO 4-bit AdamW's mean validation-loss gap to 32-bit AdamW at every evaluated model size, with the largest reported gap reduction reaching 70\%. In full-parameter supervised fine-tuning, both recipes achieve lower validation loss than TorchAO while remaining close to 32-bit AdamW on downstream tasks.

  • 10 authors
·
Oct 7

ResidualQuant: KV Cache Quantization for Looped Transformers with 2-Bit Residuals

Looped Transformers improve parameter efficiency by repeatedly applying shared Transformer blocks over multiple recurrent loops, increasing computational depth without increasing the parameter count. However, KV cache memory still scales with the number of loops, becoming a key memory bottleneck that limits batch size and inference throughput. KV cache quantization can alleviate this bottleneck, but existing methods often suffer substantial accuracy degradation at aggressive low-precision regimes. We observe that looped Transformers offer a unique opportunity: KV states across loops are highly similar. Based on this observation, we propose ResidualQuant, which uses the final-loop KV states as a reference and represents the remaining loops with low-precision residuals. Our method further combines least-square scaling and rotations applied to the residuals, as well as loop-wise mixed precision, to enable accurate quantization down to INT2 while retaining efficient reconstruction. Across multiple looped Transformer models and mathematical reasoning and code generation benchmarks, ResidualQuant consistently improves the accuracy-memory tradeoff over state-of-the-art rotation-based KV quantization. In particular, our method retains accuracy close to BF16 under mixed-precision settings while reducing theoretical KV storage by 80.7%, achieving up to 13.0% higher accuracy than the rotation-based baseline at the same memory budget. On an RTX 5090, the reduced KV memory traffic improves fixed-batch decode throughput by up to 2.73x, while the smaller memory footprint enables up to 2x larger batches, improving peak throughput by up to 4.15x.

kaist-ai KAIST AI
·
Oct 6 1

Pythagoras-Prover: Advancing Efficient Formal Proving via Augmented Lean Formalisation

Modern Lean theorem provers achieve strong performance only with substantial training and inference compute, driven in part by scarce verified proof data and the long reasoning traces of formal proof search, making both supervised fine-tuning (SFT) and sampling expensive. We introduce Pythagoras-Prover, a compute-efficient open-source family of Lean theorem provers built for practical compute budgets. The family spans two generation paradigms: autoregressive models at 4B and 32B parameters, and a first proof-of-concept diffusion-based prover (4B) that iteratively refines Lean proofs at inference time. For training efficiency, we build a Lean-verified corpus stratified into easy, medium, and hard problems for curriculum SFT, so models acquire proof skills progressively from shorter, simpler proofs to longer, harder ones. During SFT, a dynamic proof-reasoning filtering scheme preserves informative proof traces while keeping each instance within an 8k-token context budget. We also introduce Augmented Lean Formalisation (ALF), which expands scarce verified corpora into variants of formal statements, populated via self-distillation for extra training signal without formally verifying every mutated instance. By perturbing known problems while preserving their formal character, ALF reduces reliance on any statement's surface form. Empirically, Pythagoras-Prover-4B surpasses DeepSeek-Prover-V2-671B at pass@32 on MiniF2F-Test (86.1% vs 82.4%) with ~167x fewer parameters, while Pythagoras-Prover-32B sets the open-source state of the art at 93.0% on MiniF2F-Test and solves 93 of 672 PutnamBench problems. We release MiniF2F-ALF, an ALF-mutated contamination-sensitive benchmark on which every evaluated model loses accuracy; here our 32B remains strongest and our 4B matches the prior state of the art, Goedel-Prover-V2-32B.

Iterative Methods via Locally Evolving Set Process

Given the damping factor α and precision tolerance ε, andersen2006local introduced Approximate Personalized PageRank (APPR), the de facto local method for approximating the PPR vector, with runtime bounded by Θ(1/(αε)) independent of the graph size. Recently, fountoulakis2022open asked whether faster local algorithms could be developed using O(1/(sqrtαε)) operations. By noticing that APPR is a local variant of Gauss-Seidel, this paper explores the question of whether standard iterative solvers can be effectively localized. We propose to use the locally evolving set process, a novel framework to characterize the algorithm locality, and demonstrate that many standard solvers can be effectively localized. Let operatorname{vol}{ (S_t)} and overlineγ_{t} be the running average of volume and the residual ratio of active nodes textstyle S_{t} during the process. We show operatorname{vol}{ (S_t)}/overlineγ_{t} leq 1/ε and prove APPR admits a new runtime bound O(operatorname{vol}(S_t)/(αoverlineγ_{t})) mirroring the actual performance. Furthermore, when the geometric mean of residual reduction is Θ(sqrtα), then there exists c in (0,2) such that the local Chebyshev method has runtime O(operatorname{vol}(S_{t})/(sqrtα(2-c))) without the monotonicity assumption. Numerical results confirm the efficiency of this novel framework and show up to a hundredfold speedup over corresponding standard solvers on real-world graphs.

  • 6 authors
·
Oct 18, 2024

Low-Precision Training of Large Language Models: Methods, Challenges, and Opportunities

Large language models (LLMs) have achieved impressive performance across various domains. However, the substantial hardware resources required for their training present a significant barrier to efficiency and scalability. To mitigate this challenge, low-precision training techniques have been widely adopted, leading to notable advancements in training efficiency. Despite these gains, low-precision training involves several componentsx2013such as weights, activations, and gradientsx2013each of which can be represented in different numerical formats. The resulting diversity has created a fragmented landscape in low-precision training research, making it difficult for researchers to gain a unified overview of the field. This survey provides a comprehensive review of existing low-precision training methods. To systematically organize these approaches, we categorize them into three primary groups based on their underlying numerical formats, which is a key factor influencing hardware compatibility, computational efficiency, and ease of reference for readers. The categories are: (1) fixed-point and integer-based methods, (2) floating-point-based methods, and (3) customized format-based methods. Additionally, we discuss quantization-aware training approaches, which share key similarities with low-precision training during forward propagation. Finally, we highlight several promising research directions to advance this field. A collection of papers discussed in this survey is provided in https://github.com/Hao840/Awesome-Low-Precision-Training.

  • 9 authors
·
May 2, 2025 3

Tilus: A Virtual Machine for Arbitrary Low-Precision GPGPU Computation in LLM Serving

Serving Large Language Models (LLMs) is critical for AI-powered applications but demands substantial computational resources, particularly in memory bandwidth and computational throughput. Low-precision computation has emerged as a key technique to improve efficiency while reducing resource consumption. Existing approaches for generating low-precision kernels are limited to weight bit widths that are powers of two and suffer from suboptimal performance due to high-level GPU programming abstractions. These abstractions restrict critical optimizations, such as fine-grained register management and optimized memory access patterns, which are essential for efficient low-precision computations. In this paper, we introduce a virtual machine (VM) designed for General-Purpose GPU (GPGPU) computing, enabling support for low-precision data types with arbitrary bit widths while maintaining GPU programmability. The proposed VM features a thread-block-level programming model, a hierarchical memory space, a novel algebraic layout system, and extensive support for diverse low-precision data types. VM programs are compiled into highly efficient GPU programs with automatic vectorization and instruction selection. Extensive experiments demonstrate that our VM efficiently supports a full spectrum of low-precision data types, and outperforms state-of-the-art low-precision kernels on their supported types. Compared to existing compilers like Triton and Ladder, as well as hand-optimized kernels such as QuantLLM and Marlin, our VM achieves performance improvements of 1.75x, 2.61x, 1.29x and 1.03x, respectively.

  • 8 authors
·
Apr 17, 2025

The Implicit Bias of Steepest Descent with Mini-batch Stochastic Gradient

A variety of widely used optimization methods like SignSGD and Muon can be interpreted as instances of steepest descent under different norm-induced geometries. In this work, we study the implicit bias of mini-batch stochastic steepest descent in multi-class classification, characterizing how batch size, momentum, and variance reduction shape the limiting max-margin behavior and convergence rates under general entry-wise and Schatten-p norms. We show that, without momentum, worst-case convergence and successful classification can only be guaranteed with full-batch gradient. In contrast, momentum enables small-batch convergence to an approximate max-margin solution through a batch-momentum trade-off, though it slows convergence. This approach provides fully explicit, dimension-free rates that improve upon prior results. Moreover, we prove that variance reduction can recover the exact full-batch implicit bias for any batch size, albeit at a slower convergence rate. Finally, we further investigate the batch-size-one steepest descent without momentum, and reveal its convergence to a fundamentally different bias via a concrete data example, which reveals a key limitation of purely stochastic updates. Overall, our unified analysis clarifies when stochastic optimization aligns with full-batch behavior, and paves the way for perform deeper explorations of the training behavior of stochastic gradient steepest descent algorithms.

  • 3 authors
·
Jun 15

The Scalar MSW Effect: Compact analytical formulas for neutrino oscillations with large matter effects, including μ-μ and τ-τ dominant matter potentials

Deriving simple and accurate three-flavor neutrino oscillation probability formulas in matter is critical for understanding the phenomenology of upcoming experiments. In this article, we extend the Jacobi diagonalization method for deriving effective parameter mappings for neutrino oscillations in matter. The key insight behind the extension is to purposefully parameterize the mixing matrix, U_{PMNS}, using particular arrangements of Euler rotations. This novel extension allows for deriving simple and accurate effective mixing parameter mappings for exotic types of matter potentials. First, we revisit the Jacobi diagonalization method for neutrino oscillations with standard matter effects and use this to demonstrate our generalization. Subsequently, we apply the Jacobi diagonalization method to scalar non-standard interactions (SNSI) and derive effective parameter mappings for all three single diagonal coupling cases. The resulting formulas reveal that all diagonal SNSI couplings could give rise to a scalar MSW (SMSW) effect, that is an energy independent resonant enhancement analogous to the MSW effect. Finally, we study the accuracy of the derived SNSI formulas for various contemporary and upcoming experiments. For δm_{ee}, the accuracy is excellent for all considered experiments. For δm_{μμ} and δm_{ττ} the accuracy is worse since A_{CC} must be neglected, and first order perturbative corrections are applied to amend this.

  • 2 authors
·
Sep 30