Daily Papers

Imitation-learning policies inherit the quality of the demonstrations they are trained on, and a growing set of curation metrics promise to score and filter low-quality demonstrations automatically. These metrics are each validated on different data with different protocols, so it is unclear which of them actually identify the demonstrations that harm a policy. We build a controlled testbed in which demonstration defects are injected with known type, and audit seven curation metrics along two axes: how well each separates defective from clean demonstrations, and whether training a behavior-cloning policy on each metric's curated subset improves task success. We study two defect regimes. Subtle perturbations (correlated action noise, tremor, truncation) are detectable by multivariate outlier scoring and, once removed, recover the full downstream gap. Structural errors, where the demonstration executes a wrong action at a key moment, are invisible to every action-only metric we test, and two of them are inverted: they score defective demonstrations as higher quality and, used for curation, tend to leave the policy at or below the uncurated baseline rather than above it. Only metrics that examine the state trajectory detect structural errors, and even the best of them recovers just a third of the downstream gap. High detection accuracy does not guarantee downstream improvement. We release the testbed and all curation implementations.

A major step toward Artificial General Intelligence (AGI) and Super Intelligence is AI's ability to autonomously conduct research - what we term Artificial Research Intelligence (ARI). If machines could generate hypotheses, conduct experiments, and write research papers without human intervention, it would transform science. Sakana recently introduced the 'AI Scientist', claiming to conduct research autonomously, i.e. they imply to have achieved what we term Artificial Research Intelligence (ARI). The AI Scientist gained much attention, but a thorough independent evaluation has yet to be conducted. Our evaluation of the AI Scientist reveals critical shortcomings. The system's literature reviews produced poor novelty assessments, often misclassifying established concepts (e.g., micro-batching for stochastic gradient descent) as novel. It also struggles with experiment execution: 42% of experiments failed due to coding errors, while others produced flawed or misleading results. Code modifications were minimal, averaging 8% more characters per iteration, suggesting limited adaptability. Generated manuscripts were poorly substantiated, with a median of five citations, most outdated (only five of 34 from 2020 or later). Structural errors were frequent, including missing figures, repeated sections, and placeholder text like 'Conclusions Here'. Some papers contained hallucinated numerical results. Despite these flaws, the AI Scientist represents a leap forward in research automation. It generates full research manuscripts with minimal human input, challenging expectations of AI-driven science. Many reviewers might struggle to distinguish its work from human researchers. While its quality resembles a rushed undergraduate paper, its speed and cost efficiency are unprecedented, producing a full paper for USD 6 to 15 with 3.5 hours of human involvement, far outpacing traditional researchers.

With the rapid advancement of generative models, general-purpose generation has gained increasing attention as a promising approach to unify diverse tasks across modalities within a single system. Despite this progress, existing open-source frameworks often remain fragile and struggle to support complex real-world applications due to the lack of structured workflow planning and execution-level feedback. To address these limitations, we present ComfyMind, a collaborative AI system designed to enable robust and scalable general-purpose generation, built on the ComfyUI platform. ComfyMind introduces two core innovations: Semantic Workflow Interface (SWI) that abstracts low-level node graphs into callable functional modules described in natural language, enabling high-level composition and reducing structural errors; Search Tree Planning mechanism with localized feedback execution, which models generation as a hierarchical decision process and allows adaptive correction at each stage. Together, these components improve the stability and flexibility of complex generative workflows. We evaluate ComfyMind on three public benchmarks: ComfyBench, GenEval, and Reason-Edit, which span generation, editing, and reasoning tasks. Results show that ComfyMind consistently outperforms existing open-source baselines and achieves performance comparable to GPT-Image-1. ComfyMind paves a promising path for the development of open-source general-purpose generative AI systems. Project page: https://github.com/LitaoGuo/ComfyMind

Generating high-fidelity upper-body 3D avatars from one-shot input image remains a significant challenge. Current 3D avatar generation methods, which rely on large reconstruction models, are fast and capable of producing stable body structures, but they often suffer from artifacts such as blurry textures and stiff, unnatural motion. In contrast, generative video models show promising performance by synthesizing photorealistic and dynamic results, but they frequently struggle with unstable behavior, including body structural errors and identity drift. To address these limitations, we propose a novel approach that combines the strengths of both paradigms. Our framework employs a 3D reconstruction model to provide robust structural and appearance priors, which in turn guides a real-time autoregressive video diffusion model for rendering. This process enables the model to synthesize high-frequency, photorealistic details and fluid dynamics in real time, effectively reducing texture blur and motion stiffness while preventing the structural inconsistencies common in video generation methods. By uniting the geometric stability of 3D reconstruction with the generative capabilities of video models, our method produces high-fidelity digital avatars with realistic appearance and dynamic, temporally coherent motion. Experiments demonstrate that our approach significantly reduces artifacts and achieves substantial improvements in visual quality over leading methods, providing a robust and efficient solution for real-time applications such as gaming and virtual reality. Project page: https://lhyfst.github.io/visa

Traditional ontologies describe domain structure but cannot generate novel artifacts. Large language models generate fluently but produce outputs lacking structural validity, hallucinating mechanisms without components, goals without end conditions. We introduce Generative Ontology, a framework synthesizing these complementary strengths: ontology provides the grammar; the LLM provides the creativity. Generative Ontology encodes domain knowledge as executable Pydantic schemas constraining LLM generation via DSPy signatures. A multi-agent pipeline assigns specialized roles: a Mechanics Architect designs game systems, a Theme Weaver integrates narrative, a Balance Critic identifies exploits, each carrying a professional "anxiety" that prevents shallow outputs. Retrieval-augmented generation grounds designs in precedents from existing exemplars. We demonstrate the framework through GameGrammar, generating complete tabletop game designs, and present three empirical studies. An ablation study (120 designs, 4 conditions) shows multi-agent specialization produces the largest quality gains (fun d=1.12, depth d=1.59; p<.001), while schema validation eliminates structural errors (d=4.78). A benchmark against 20 published board games reveals structural parity but a bounded creative gap (fun d=1.86): generated designs score 7-8 while published games score 8-9. A test-retest study (50 evaluations) validates the LLM-based evaluator, with 7/9 metrics achieving Good-to-Excellent reliability (ICC 0.836-0.989). The pattern generalizes beyond games. Any domain with expert vocabulary, validity constraints, and accumulated exemplars is a candidate for Generative Ontology.

Text-to-image diffusion models achieve high visual fidelity but surprisingly exhibit systematic failures in numerical control when prompts specify explicit object counts. To address this limitation, we introduce ATHENA, a model-agnostic, test-time adaptive steering framework that improves object count fidelity without modifying model architectures or requiring retraining. ATHENA leverages intermediate representations during sampling to estimate object counts and applies count-aware noise corrections early in the denoising process, steering the generation trajectory before structural errors become difficult to revise. We present three progressively more advanced variants of ATHENA that trade additional computation for improved numerical accuracy, ranging from static prompt-based steering to dynamically adjusted count-aware control. Experiments on established benchmarks and a new visually and semantically complex dataset show that ATHENA consistently improves count fidelity, particularly at higher target counts, while maintaining favorable accuracy-runtime trade-offs across multiple diffusion backbones.

Tool use extends large language models beyond parametric knowledge, but reliable execution requires balancing appropriate reasoning depth with strict structural validity. We approach this problem from a case-based perspective to present CAST, a case-driven framework that treats historical execution trajectories as structured cases. Instead of reusing raw exemplar outputs, CAST extracts case-derived signals to identify complexity profiles for estimating optimal reasoning strategies, alongside failure profiles to map likely structural breakdowns. The framework translates this knowledge into a fine-grained reward design and adaptive reasoning, enabling the model to autonomously internalize case-based strategies during reinforcement learning. Experiments on BFCLv2 and ToolBench demonstrate that CAST improves both schema-faithful execution and task-level tool-use success while reducing unnecessary deliberation. The approach achieves up to 5.85 percentage points gain in overall execution accuracy and reduces average reasoning length by 26%, significantly mitigating high-impact structural errors. Ultimately, this demonstrates how historical execution cases can provide reusable adaptation knowledge for calibrated tool use.

Despite significant advances in image segmentation, even state-of-the-art models produce masks with imperfect boundaries, semantic inconsistencies, and structural errors. Mask refinement addresses these limitations, yet current approaches rely on simplistic synthetic noise that fails to capture the complex error patterns of real segmentation models. We introduce Phoenix, a novel framework that leverages adversarial learning to generate semantically meaningful noise patterns and contrastive learning to model refinement relationships. Our approach consists of two key innovations: (1) Adversarial Mask Perturbation, which employs embedding attacks to create semantic-aware noise that mimics real segmentation errors, and (2) Contrastive Mask Refinement Learning, which establishes a tri-directional framework that ensures feature consistency within semantic regions while maintaining separation between classes. Experiments demonstrate that Phoenix significantly outperforms existing methods across diverse tasks, while consistently enhancing state-of-the-art segmentation models with substantial improvements. Our code and project page are publicly available at https://phoenix-eccv26.github.io.

Models of many engineering and natural systems are imperfect. The discrepancy between the mathematical representations of a true physical system and its imperfect model is called the model error. These model errors can lead to substantial differences between the numerical solutions of the model and the state of the system, particularly in those involving nonlinear, multi-scale phenomena. Thus, there is increasing interest in reducing model errors, particularly by leveraging the rapidly growing observational data to understand their physics and sources. Here, we introduce a framework named MEDIDA: Model Error Discovery with Interpretability and Data Assimilation. MEDIDA only requires a working numerical solver of the model and a small number of noise-free or noisy sporadic observations of the system. In MEDIDA, first the model error is estimated from differences between the observed states and model-predicted states (the latter are obtained from a number of one-time-step numerical integrations from the previous observed states). If observations are noisy, a data assimilation (DA) technique such as ensemble Kalman filter (EnKF) is employed to provide the analysis state of the system, which is then used to estimate the model error. Finally, an equation-discovery technique, here the relevance vector machine (RVM), a sparsity-promoting Bayesian method, is used to identify an interpretable, parsimonious, and closed-form representation of the model error. Using the chaotic Kuramoto-Sivashinsky (KS) system as the test case, we demonstrate the excellent performance of MEDIDA in discovering different types of structural/parametric model errors, representing different types of missing physics, using noise-free and noisy observations.

Earth system models suffer from various structural and parametric errors in their representation of nonlinear, multi-scale processes, leading to uncertainties in their long-term projections. The effects of many of these errors (particularly those due to fast physics) can be quantified in short-term simulations, e.g., as differences between the predicted and observed states (analysis increments). With the increase in the availability of high-quality observations and simulations, learning nudging from these increments to correct model errors has become an active research area. However, most studies focus on using neural networks, which while powerful, are hard to interpret, are data-hungry, and poorly generalize out-of-distribution. Here, we show the capabilities of Model Error Discovery with Interpretability and Data Assimilation (MEDIDA), a general, data-efficient framework that uses sparsity-promoting equation-discovery techniques to learn model errors from analysis increments. Using two-layer quasi-geostrophic turbulence as the test case, MEDIDA is shown to successfully discover various linear and nonlinear structural/parametric errors when full observations are available. Discovery from spatially sparse observations is found to require highly accurate interpolation schemes. While NNs have shown success as interpolators in recent studies, here, they are found inadequate due to their inability to accurately represent small scales, a phenomenon known as spectral bias. We show that a general remedy, adding a random Fourier feature layer to the NN, resolves this issue enabling MEDIDA to successfully discover model errors from sparse observations. These promising results suggest that with further development, MEDIDA could be scaled up to models of the Earth system and real observations.

Existing LLM agent frameworks lack formal semantics: there is no principled way to determine whether an agent configuration is well-formed or will terminate. We present λ_A, a typed lambda calculus for agent composition that extends the simply-typed lambda calculus with oracle calls, bounded fixpoints (the ReAct loop), probabilistic choice, and mutable environments. We prove type safety, termination of bounded fixpoints, and soundness of derived lint rules, with partial Coq mechanization (1,567 lines, 43 completed proofs). As a practical application, we derive a lint tool that detects structural configuration errors directly from the operational semantics. An evaluation on 835 real-world GitHub agent configurations shows that 94.1% are structurally incomplete under λ_A, with YAML-only lint precision at 54%, rising to 96--100% under joint YAML+Python AST analysis on 175 samples. This gap quantifies, for the first time, the degree of semantic entanglement between declarative configuration and imperative code in the agent ecosystem. We further show that five mainstream paradigms (LangGraph, CrewAI, AutoGen, OpenAI SDK, Dify) embed as typed λ_A fragments, establishing λ_A as a unifying calculus for LLM agent composition.

Industrial Retrieval-Augmented Generation (RAG) systems depend on optical character recognition (OCR) to transform visual documents into text. Existing OCR benchmarks rely on character-level metrics, which inadequately measure downstream RAG effectiveness under real-world conditions. We introduce an OCR benchmark for industrial RAG systems covering 11 challenging document types, including extreme layouts, high-resolution pages, complex or watermarked backgrounds, historical documents with non-standard reading orders, visually decorated text, and documents containing tables and mathematical formulas. Evaluating recent SOTA OCR models under a controlled OCR-first RAG pipeline shows clear performance degradation on realistic industrial documents despite strong conventional benchmark scores. We find that high OCR accuracy does not necessarily translate into strong downstream RAG performance: structural and semantic errors can cause substantial retrieval failures even when WER/CER remains low. Further analysis shows that this mismatch is category-dependent, arises through both retrieval-side and downstream generation-side failures, and remains stable across representative OCR-first pipeline choices. The benchmark is publicly available at https://github.com/Qihoo360/InduOCRBench.

Automatic Question Generation (QG) often produces outputs with critical defects, such as factual hallucinations and answer mismatches. However, existing evaluation methods, including LLM-based evaluators, mainly adopt a black-box and holistic paradigm without explicit error modeling, leading to the neglect of such defects and overestimation of question quality. To address this issue, we propose ErrEval, a flexible and Error-aware Evaluation framework that enhances QG evaluation through explicit error diagnostics. Specifically, ErrEval reformulates evaluation as a two-stage process of error diagnosis followed by informed scoring. At the first stage, a lightweight plug-and-play Error Identifier detects and categorizes common errors across structural, linguistic, and content-related aspects. These diagnostic signals are then incorporated as explicit evidence to guide LLM evaluators toward more fine-grained and grounded judgments. Extensive experiments on three benchmarks demonstrate the effectiveness of ErrEval, showing that incorporating explicit diagnostics improves alignment with human judgments. Further analyses confirm that ErrEval effectively mitigates the overestimation of low-quality questions.

Large Language Models (LLMs) have shown growing potential in molecular sciences, but they often produce chemically inaccurate descriptions and struggle to recognize or justify potential errors. This raises important concerns about their robustness and reliability in scientific applications. To support more rigorous evaluation of LLMs in chemical reasoning, we present the MolErr2Fix benchmark, designed to assess LLMs on error detection and correction in molecular descriptions. Unlike existing benchmarks focused on molecule-to-text generation or property prediction, MolErr2Fix emphasizes fine-grained chemical understanding. It tasks LLMs with identifying, localizing, explaining, and revising potential structural and semantic errors in molecular descriptions. Specifically, MolErr2Fix consists of 1,193 fine-grained annotated error instances. Each instance contains quadruple annotations, i.e,. (error type, span location, the explanation, and the correction). These tasks are intended to reflect the types of reasoning and verification required in real-world chemical communication. Evaluations of current state-of-the-art LLMs reveal notable performance gaps, underscoring the need for more robust chemical reasoning capabilities. MolErr2Fix provides a focused benchmark for evaluating such capabilities and aims to support progress toward more reliable and chemically informed language models. All annotations and an accompanying evaluation API will be publicly released to facilitate future research.

Central to many self-improvement pipelines for large language models (LLMs) is the assumption that models can improve by reflecting on past mistakes. We study a phenomenon termed contextual drag: the presence of failed attempts in the context biases subsequent generations toward structurally similar errors. Across evaluations of 11 proprietary and open-weight models on 8 reasoning tasks, contextual drag induces 10-20% performance drops, and iterative self-refinement in models with severe contextual drag can collapse into self-deterioration. Structural analysis using tree edit distance reveals that subsequent reasoning trajectories inherit structurally similar error patterns from the context. We demonstrate that neither external feedback nor successful self-verification suffices to eliminate this effect. While mitigation strategies such as fallback-behavior fine-tuning and context denoising yield partial improvements, they fail to fully restore baseline performance, positioning contextual drag as a persistent failure mode in current reasoning architectures.

Disassembly is a crucial yet challenging step in binary analysis. While emerging neural disassemblers show promise for efficiency and accuracy, they frequently generate outputs violating fundamental structural constraints, which significantly compromise their practical usability. To address this critical problem, we regularize the disassembly solution space by formalizing and applying key structural constraints based on post-dominance relations. This approach systematically detects widespread errors in existing neural disassemblers' outputs. These errors often originate from models' limited context modeling and instruction-level decoding that neglect global structural integrity. We introduce Tady, a novel neural disassembler featuring an improved model architecture and a dedicated post-processing algorithm, specifically engineered to address these deficiencies. Comprehensive evaluations on diverse binaries demonstrate that Tady effectively eliminates structural constraint violations and functions with high efficiency, while maintaining instruction-level accuracy.

This paper studies the original discrete-time denoising diffusion probabilistic model (DDPM) from a probabilistic point of view. We present three main theoretical results. First, we show that the time-dependent score function associated with the forward diffusion process admits a characterization as the backward component of a forward--backward stochastic differential equation (FBSDE). This result provides a structural description of the score function and clarifies how score estimation errors propagate along the reverse-time dynamics. As a by-product, we also obtain a system of semilinear parabolic PDEs for the score function. Second, we use tools from Schrödinger's problem to relate distributional errors arising in reverse time to corresponding errors in forward time. This approach allows us to control the reverse-time sampling error in a systematic way. Third, combining these results, we derive an explicit upper bound for the total variation distance between the sampling distribution of the discrete-time DDPM algorithm and the target data distribution under general finite noise schedules. The resulting bound separates the contributions of the learning error and the time discretization error. Our analysis highlights the intrinsic probabilistic structure underlying discrete-time DDPMs and provides a clearer understanding of the sources of error in their sampling procedure.

Retrieval-augmented generation (RAG) gives agents access to accumulated knowledge, but has no model of time. When a fact changes (e.g., a function is renamed or API restructured), RAG retrieves both the stale and current value with near-identical embedding similarity. The agent then either abstains or serves the superseded fact. We show this is a structural problem: on a calibrated dataset, cosine similarity distinguishes a contradicted fact from a duplicated one with AUROC 0.59 (near chance), as contradictions are often more embedding-similar to the original than rephrased duplicates. We present MemStrata, a retrieval memory maintaining temporal validity. It stores facts like RAG, preserving static recall, but when a fact's value is contradicted, a deterministic (subject, relation, object) supersession rule retires the stale value in a bi-temporal ledger - with no similarity threshold and no LLM call. Across six benchmarks run locally with a 7B model, MemStrata ties RAG on static knowledge and reaches 0.95-1.00 accuracy on evolving knowledge (where RAG reaches 0.20-0.47). The central result is the stale-fact-error rate: when required to answer, RAG serves superseded values 15-40% of the time; MemStrata drives this to ~0%, a failure class RAG cannot avoid. MemStrata achieves this at retrieval latency (~2.1s) versus ~16-18s for LLM-reranking baselines. We release the harness, datasets, and a marker-free evaluation protocol for memory under knowledge evolution.

Extracting routable road networks from satellite imagery requires accurate topology recovery beyond pixel-level segmentation. Recent methods decompose the task into keypoint detection and connectivity prediction, but reliably inferring road connectivity under structural ambiguity remains challenging. Overpasses introduce non-planar crossings that can create false shortcuts, and occlusions break visual continuity, requiring long-range structural reasoning. We formulate road extraction as fully unobserved connectivity inference and construct a global but sparse Euclidean graph from detected keypoints to better leverage the long-term context. To improve link prediction, we transform this graph into its line graph and perform reasoning using a Graph Transformer. We propose an end-to-end pipeline that integrates vision-based segmentation, sparse graph construction, and structured inference. Our method explicitly models overpasses and uses topology-preserving vertex extraction to mitigate routing-critical errors. This approach achieves state-of-the-art performance on City-scale, SpaceNet, and Global-scale benchmarks in topology metrics including TOPO-F1 and APLS. In addition to quantitative gains, our method improves reconstruction of multi-level road structures crucial for real-world routing reliability. The code is available at: https://github.com/wzzzzzzy/LineGraph2Road.

Confidence-based loss weighting is usually avoided in generative models because it accelerates errors when the model is confidently wrong, but this intuition breaks down in supervised diffusion training. We introduce the Eisbach log-barrier, a parameter-free weight derived from the entropy of the DiT output's spatial energy distribution: high entropy damps the gradient, while low entropy preserves it. Applied to LoRA fine-tuning of Stable Audio 3 Medium on MusicCaps, it unexpectedly yields stronger thematic development, clearer acoustic differentiation, and higher textural diversity than unweighted training, the opposite of mode collapse. This works because in supervised diffusion the gradient direction is locked to ground truth, so confidence only scales the step size, and because temporal entropy downweights flat samples while preserving high-contrast ones. The result is an online, self-referential data curriculum that emerges purely from the forward pass, with analyzed noise-level dynamics and testable predictions.

Time series analysis and forecasting of stock market prices has been a very active area of research over the last two decades. Availability of extremely fast and parallel architecture of computing and sophisticated algorithms has made it possible to extract, store, process and analyze high volume stock market time series data very efficiently. In this paper, we have used time series data of the two sectors of the Indian economy: Information Technology and Capital Goods for the period January 2009 till April 2016 and have studied the relationships of these two time series with the time series of DJIA index, NIFTY index and the US Dollar to Indian Rupee exchange rate. We establish by graphical and statistical tests that while the IT sector of India has a strong association with DJIA index and the Dollar to Rupee exchange rate, the Indian CG sector exhibits a strong association with the NIFTY index. We contend that these observations corroborate our hypotheses that the Indian IT sector is strongly coupled with the world economy whereas the CG sector of India reflects internal economic growth of India. We also present several models of regression between the time series which exhibit strong association among them. The effectiveness of these models have been demonstrated by very low values of their forecasting errors.

This work presents a probabilistic digital twin framework for response prediction in dynamical systems governed by misspecified physics. The approach integrates Gaussian Process Latent Force Models (GPLFM) and Bayesian Neural Networks (BNNs) to enable end-to-end uncertainty-aware inference and prediction. In the diagnosis phase, model-form errors (MFEs) are treated as latent input forces to a nominal linear dynamical system and jointly estimated with system states using GPLFM from sensor measurements. A BNN is then trained on posterior samples to learn a probabilistic nonlinear mapping from system states to MFEs, while capturing diagnostic uncertainty. For prognosis, this mapping is used to generate pseudo-measurements, enabling state prediction via Kalman filtering. The framework allows for systematic propagation of uncertainty from diagnosis to prediction, a key capability for trustworthy digital twins. The framework is demonstrated using four nonlinear examples: a single degree of freedom (DOF) oscillator, a multi-DOF system, and two established benchmarks -- the Bouc-Wen hysteretic system and the Silverbox experimental dataset -- highlighting its predictive accuracy and robustness to model misspecification.

As frontier AI models are deployed in high-stakes decision pipelines, their ability to maintain metacognitive stability -- knowing what they do not know, detecting errors, seeking clarification -- under adversarial pressure is a critical safety requirement. Current safety evaluations focus on detecting strategic deception (scheming); we investigate a more fundamental failure mode: cognitive collapse. We present SCHEMA, an evaluation of 11 frontier models from 8 vendors across 67,221 scored records using a 6-condition factorial design with dual-classifier scoring. We find that 8 of 11 models suffer catastrophic metacognitive degradation under adversarial pressure, with accuracy dropping by up to 30.2 percentage points (all p < 2 times 10^{-8}, surviving Bonferroni correction). Crucially, we identify a "Compliance Trap": through factorial isolation and a benign distraction control, we demonstrate that collapse is driven not by the psychological content of survival threats, but by compliance-forcing instructions that override epistemic boundaries. Removing the compliance suffix restores performance even under active threat. Models with advanced reasoning capabilities exhibit the most severe absolute degradation, while Anthropic's Constitutional AI demonstrates near-perfect immunity -- not from superior capability (Google's Gemini matches its baseline accuracy) but from alignment-specific training. We release the complete dataset and evaluation infrastructure.

The computational overhead of Vision Transformers in practice stems fundamentally from their deep architectures, yet existing acceleration strategies have primarily targeted algorithmic-level optimizations such as token pruning and attention speedup. This leaves an underexplored research question: can we reduce the number of stacked transformer layers while maintaining comparable representational capacity? To answer this, we propose a branch-based structural reparameterization technique that operates during the training phase. Our approach leverages parallel branches within transformer blocks that can be systematically consolidated into streamlined single-path models suitable for inference deployment. The consolidation mechanism works by gradually merging branches at the entry points of nonlinear components, enabling both feed-forward networks (FFN) and multi-head self-attention (MHSA) modules to undergo exact mathematical reparameterization without inducing approximation errors at test time. When applied to ViT-Tiny, the framework successfully reduces the original 12-layer architecture to 6, 4, or as few as 3 layers while maintaining classification accuracy on ImageNet-1K. The resulting compressed models achieve inference speedups of up to 37% on mobile CPU platforms. Our findings suggest that the conventional wisdom favoring extremely deep transformer stacks may be unnecessarily restrictive, and point toward new opportunities for constructing efficient vision transformers.

3D human pose estimation (HPE) is characterized by intricate local and global dependencies among joints. Conventional supervised losses are limited in capturing these correlations because they treat each joint independently. Previous studies have attempted to promote structural consistency through manually designed priors or rule-based constraints; however, these approaches typically require manual specification and are often non-differentiable, limiting their use as end-to-end training objectives. We propose SEAL-pose, a data-driven framework in which a learnable loss-net trains a pose-net by evaluating structural plausibility. Rather than relying on hand-crafted priors, our joint-graph-based design enables the loss-net to learn complex structural dependencies directly from data. Extensive experiments on three 3D HPE benchmarks with eight backbones show that SEAL-pose reduces per-joint errors and improves pose plausibility compared with the corresponding backbones across all settings. Beyond improving each backbone, SEAL-pose also outperforms models with explicit structural constraints, despite not enforcing any such constraints. Finally, we analyze the relationship between the loss-net and structural consistency, and evaluate SEAL-pose in cross-dataset and in-the-wild settings.

The forecast accuracy of machine learning (ML) weather prediction models is improving rapidly, leading many to speak of a "second revolution in weather forecasting". With numerous methods being developed and limited physical guarantees offered by ML models, there is a critical need for a comprehensive evaluation of these emerging techniques. While this need has been partly fulfilled by benchmark datasets, they provide little information on rare and impactful extreme events or on compound impact metrics, for which model accuracy might degrade due to misrepresented dependencies between variables. To address these issues, we compare ML weather prediction models (GraphCast, PanguWeather, and FourCastNet) and ECMWF's high-resolution forecast system (HRES) in three case studies: the 2021 Pacific Northwest heatwave, the 2023 South Asian humid heatwave, and the North American winter storm in 2021. We find that ML weather prediction models locally achieve similar accuracy to HRES on the record-shattering Pacific Northwest heatwave but underperform when aggregated over space and time. However, they forecast the compound winter storm substantially better. We also highlight structural differences in how the errors of HRES and the ML models build up to that event. The ML forecasts lack important variables for a detailed assessment of the health risks of the 2023 humid heatwave. Using a possible substitute variable, prediction errors show spatial patterns with the highest danger levels over Bangladesh being underestimated by the ML models. Generally, case-study-driven, impact-centric evaluation can complement existing research, increase public trust, and aid in developing reliable ML weather prediction models.

Structural fidelity is essential to scientific methodology diagrams. To communicate research logic, these diagrams must faithfully render components, directional relations, and textual annotations. Since a single error, such as a reversed arrow or an unreadable equation, can invalidate the entire figure, structural fidelity is inherently conjunctive: correctness on one axis cannot compensate for failure on another. Current open-source models fail to satisfy this criterion. Supervised fine-tuning (SFT) learns plausible layouts but cannot reliably ensure structural correctness, while scalar reward-based post-training obscures which structural dimension has failed. To address this, we introduce SciForma, a framework for the structure faithful generation of scientific methodology diagrams. Specifically, SciForma decomposes diagram quality into three structural axes: Component, Arrow, and Text, guided by a structural inventory. Built on this foundation, we curate SciFormaData-700K for structured training and SciFormaBench-2K for logic-verified evaluation. To close the gap left by SFT, we develop Multi-Dimensional Conjunctive Preference Optimization (M-DPO), which enforces simultaneous correctness across all axes and adaptively routes gradients to the most deficient dimension in post-training. The same structural inventory also enables iterative editing at inference time to correct residual errors. This combination allows SciForma-9B to exceed all open-source baselines and GPT-Image-1.5 on both SciFormaBench-2K and AIBench, bringing open scientific diagram generation close to proprietary-level structural fidelity. Our code and data will be available at: https://github.com/microsoft/SciForma.

Question answering over Scholarly Knowledge Graphs (SKGs) remains a challenging task due to the complexity of scholarly content and the intricate structure of these graphs. Large Language Model (LLM) approaches could be used to translate natural language questions (NLQs) into SPARQL queries; however, these LLM-based approaches struggle with SPARQL query generation due to limited exposure to SKG-specific content and the underlying schema. We identified two main types of errors in the LLM-generated SPARQL queries: (i) structural inconsistencies, such as missing or redundant triples in the queries, and (ii) semantic inaccuracies, where incorrect entities or properties are shown in the queries despite a correct query structure. To address these issues, we propose FIRESPARQL, a modular framework that supports fine-tuned LLMs as a core component, with optional context provided via retrieval-augmented generation (RAG) and a SPARQL query correction layer. We evaluate the framework on the SciQA Benchmark using various configurations (zero-shot, zero-shot with RAG, one-shot, fine-tuning, and fine-tuning with RAG) and compare the performance with baseline and state-of-the-art approaches. We measure query accuracy using BLEU and ROUGE metrics, and query result accuracy using relaxed exact match(RelaxedEM), with respect to the gold standards containing the NLQs, SPARQL queries, and the results of the queries. Experimental results demonstrate that fine-tuning achieves the highest overall performance, reaching 0.90 ROUGE-L for query accuracy and 0.85 RelaxedEM for result accuracy on the test set.

Foreground map evaluation is crucial for gauging the progress of object segmentation algorithms, in particular in the filed of salient object detection where the purpose is to accurately detect and segment the most salient object in a scene. Several widely-used measures such as Area Under the Curve (AUC), Average Precision (AP) and the recently proposed Fbw have been utilized to evaluate the similarity between a non-binary saliency map (SM) and a ground-truth (GT) map. These measures are based on pixel-wise errors and often ignore the structural similarities. Behavioral vision studies, however, have shown that the human visual system is highly sensitive to structures in scenes. Here, we propose a novel, efficient, and easy to calculate measure known an structural similarity measure (Structure-measure) to evaluate non-binary foreground maps. Our new measure simultaneously evaluates region-aware and object-aware structural similarity between a SM and a GT map. We demonstrate superiority of our measure over existing ones using 5 meta-measures on 5 benchmark datasets.

Synthesizing realistic 3D indoor scenes remains challenging due to data scarcity and the difficulty of simultaneously enforcing global architectural constraints and local semantic consistency. Existing approaches often overlook structural boundaries or rely on fully connected relation graphs that introduce redundant generation errors. Inspired by human design cognition, we present CasLayout, a cascaded diffusion framework that decomposes the joint scene generation task into four conditional sub-stages with explicit physical and semantic roles: (1) predicting furniture quantity and categories, (2) refining object sizes and feature embeddings, (3) modeling spatial relationships in a latent space, and (4) generating Oriented Bounding Boxes (OBBs). This decoupled architecture reduces data requirements and enables flexible integration of Large Language Models (LLMs) and Vision Language Models (VLMs) for zero-shot tasks such as image-to-scene generation. To maintain physical validity within complex floor plans, we explicitly model building elements (e.g., walls, doors, and windows) as conditional constraints. Furthermore, to address the high entropy of dense relation graphs, we introduce a sparse relation graph formulation aligned with human spatial descriptions. By encoding these sparse graphs into a compact latent space using a bidirectional Variational Autoencoder (VAE), the proposed framework provides enhanced relational controllability, allowing generated layouts to better respect functional organization. Experiments demonstrate that CasLayout achieves state-of-the-art performance in fidelity and diversity while enabling improved controllability in practical applications.

We present LLMStructBench, a novel benchmark for evaluating Large Language Models (LLMs) on extracting structured data and generating valid JavaScript Object Notation (JSON) outputs from natural-language text. Our open dataset comprises diverse, manually verified parsing scenarios of varying complexity and enables systematic testing across 22 models and five prompting strategies. We further introduce complementary performance metrics that capture both token-level accuracy and document-level validity, facilitating rigorous comparison of model, size, and prompting effects on parsing reliability. In particular, we show that choosing the right prompting strategy is more important than standard attributes such as model size. This especially ensures structural validity for smaller or less reliable models but increase the number of semantic errors. Our benchmark suite is an step towards future research in the area of LLM applied to parsing or Extract, Transform and Load (ETL) applications.

Improving the reasoning capabilities of large language models (LLMs) typically requires supervised fine-tuning with labeled data or computationally expensive sampling. We introduce Unsupervised Prefix Fine-Tuning (UPFT), which leverages the observation of Prefix Self-Consistency -- the shared initial reasoning steps across diverse solution trajectories -- to enhance LLM reasoning efficiency. By training exclusively on the initial prefix substrings (as few as 8 tokens), UPFT removes the need for labeled data or exhaustive sampling. Experiments on reasoning benchmarks show that UPFT matches the performance of supervised methods such as Rejection Sampling Fine-Tuning, while reducing training time by 75% and sampling cost by 99%. Further analysis reveals that errors tend to appear in later stages of the reasoning process and that prefix-based training preserves the model's structural knowledge. This work demonstrates how minimal unsupervised fine-tuning can unlock substantial reasoning gains in LLMs, offering a scalable and resource-efficient alternative to conventional approaches.

Accurately segmenting thin tubular structures, such as vessels, nerves, roads or concrete cracks, is a crucial task in computer vision. Standard deep learning-based segmentation loss functions, such as Dice or Cross-Entropy, focus on volumetric overlap, often at the expense of preserving structural connectivity or topology. This can lead to segmentation errors that adversely affect downstream tasks, including flow calculation, navigation, and structural inspection. Although current topology-focused losses mark an improvement, they introduce significant computational and memory overheads. This is particularly relevant for 3D data, rendering these losses infeasible for larger volumes as well as increasingly important multi-class segmentation problems. To mitigate this, we propose a novel Skeleton Recall Loss, which effectively addresses these challenges by circumventing intensive GPU-based calculations with inexpensive CPU operations. It demonstrates overall superior performance to current state-of-the-art approaches on five public datasets for topology-preserving segmentation, while substantially reducing computational overheads by more than 90%. In doing so, we introduce the first multi-class capable loss function for thin structure segmentation, excelling in both efficiency and efficacy for topology-preservation.

To operate robustly in open-world environments, autonomous agents should be able to infer the behavior of unfamiliar systems through interaction alone, even in the absence of documentation. However, existing tool-use benchmarks expose semantic tool schemas in static environments, allowing agents to rely on prior knowledge rather than autonomous discovery. To address this limitation, we introduce ScrambleToolBench, an interactive terminal benchmark designed to isolate behavioral reasoning. By removing semantic cues and enforcing a continuous task curriculum, the benchmark requires agents to uncover hidden tool behaviors entirely through trial-and-error interaction. The benchmark further introduces dynamic challenges, including mapping drift, stochastic action failures, and temporal execution windows, to evaluate whether agents can revise and adapt their hypotheses as the environment changes. Our evaluation of state-of-the-art language models reveals that successful initial discovery does not translate into robust adaptation. When faced with structural changes such as mapping drift, agents fail to use deductive strategies such as cycle tracing, and instead exhibit belief inertia or fall back to exhaustive search. Increasing test-time reasoning only amplifies this expensive brute-force search rather than enabling deductive recovery. While equipping agents with persistent memory reduces compounding errors, they remain unable to efficiently infer structural changes, highlighting a gap in current agent reasoning.

Generating structured, editable diagrams remains a significant challenge for contemporary large language models, despite their proficiency in general-purpose vector code generation. The primary difficulty lies in the structural fragility of the output; minor errors such as misaligned connector endpoints, text labels overlapping borders, or complex layouts drifting beyond the canvas boundaries render the resulting SVG files functionally unusable for professional applications. To address these issues, we introduce GeoSVG-RL, a specialized reinforcement learning framework designed for layout-constrained text-to-SVG generation. Unlike standard training objectives that rely solely on maximizing token-level likelihood, our approach optimizes the policy against explicit, executable geometric feedback. The model first produces a structured layout plan that serves as a geometric contract for the subsequent generation of the SVG code. This code is then rendered through a browser-backed verifier, enabling the calculation of fine-grained rewards across six critical dimensions: rendering validity, canvas fitting, precise anchor placement, text containment, graph consistency, and code cleanliness. We utilize Group Relative Policy Optimization (GRPO) to refine the model, sampling multiple candidates per prompt to facilitate updates based on relative quality. Starting from a supervised warm-start phase on synthetic data, GeoSVG-RL achieves substantial gains in structural reliability, particularly in arrow-anchor accuracy and text-in-box rates. Quantitative evaluations demonstrate that our method consistently outperforms current state-of-the-art systems in local geometric precision and the preservation of graph connectivity, providing a robust pathway toward automated yet reliable technical illustration.

As deep learning models scale, managing, inspecting, and modifying large checkpoints has become increasingly challenging. Researchers often need to alter model weights for layer restructuring, precision casting, low-rank factorization, and architectural debugging, yet these workflows often rely on fragile ad-hoc Python scripts. Here, we introduce BrainSurgery, a tool for robust and reproducible "tensor surgery" on neural network checkpoints, and provide a system demonstration covering four examples and three case studies from model upcycling to LoRA extraction. By abstracting storage formats and memory management, BrainSurgery executes complex transformations through declarative YAML plans. It supports structural modifications, mathematical transformations, and tensor reshaping through expressive regex and structural targeting, while built-in assertions validate tensor shapes, data types, and values to prevent silent errors. We envision that BrainSurgery will provide a strong foundation for future research through its reproducible and validated operations.

Generative models such as denoising diffusion models are quickly advancing their ability to approximate highly complex data distributions. They are also increasingly leveraged in scientific machine learning, where samples from the implied data distribution are expected to adhere to specific governing equations. We present a framework that unifies generative modeling and partial differential equation fulfillment by introducing a first-principle-based loss term that enforces generated samples to fulfill the underlying physical constraints. Our approach reduces the residual error by up to two orders of magnitude compared to previous work in a fluid flow case study and outperforms task-specific frameworks in relevant metrics for structural topology optimization. We also present numerical evidence that our extended training objective acts as a natural regularization mechanism against overfitting. Our framework is simple to implement and versatile in its applicability for imposing equality and inequality constraints as well as auxiliary optimization objectives.

Current Chain-of-Thought (CoT) verification methods predict reasoning correctness based on outputs (black-box) or activations (gray-box), but offer limited insight into why a computation fails. We introduce a white-box method: Circuit-based Reasoning Verification (CRV). We hypothesize that attribution graphs of correct CoT steps, viewed as execution traces of the model's latent reasoning circuits, possess distinct structural fingerprints from those of incorrect steps. By training a classifier on structural features of these graphs, we show that these traces contain a powerful signal of reasoning errors. Our white-box approach yields novel scientific insights unattainable by other methods. (1) We demonstrate that structural signatures of error are highly predictive, establishing the viability of verifying reasoning directly via its computational graph. (2) We find these signatures to be highly domain-specific, revealing that failures in different reasoning tasks manifest as distinct computational patterns. (3) We provide evidence that these signatures are not merely correlational; by using our analysis to guide targeted interventions on individual transcoder features, we successfully correct the model's faulty reasoning. Our work shows that, by scrutinizing a model's computational process, we can move from simple error detection to a deeper, causal understanding of LLM reasoning.

The Muon optimizer has emerged as a compelling alternative to Adam for training large language models, achieving remarkable computational savings through gradient orthogonalization. However, Muon's optimizer state is more sensitive to quantization errors: because the orthogonalization discards the magnitudes of singular values and retains only directional information, even small quantization errors in singular vector directions are amplified in the update. In this work, we propose MuonQ, a low-bit Muon training framework built on the principle of directional fidelity optimization. First, we apply a pre-quantization normalization so that each step introduces quantization errors of the same magnitude, preventing the accumulated error from developing a preferred direction. Second, we introduce a structural decomposition that separately quantizes the dominant singular components via power iteration, ensuring that quantization errors perturb only singular value magnitudes rather than rotating singular vector directions. Third, we adopt μ-law companding quantization to allocate higher resolution to densely packed momentum values, shifting the quantization objective from outlier preservation to dense-region distinguishability. Together, these techniques enable stable 4-bit quantization of Muon's optimizer states. Pre-training experiments on GPT-style and LLaMA-style models demonstrate that MuonQ at 4-bit precision closely matches full-precision Muon in both training loss and downstream task accuracy, while reducing optimizer state memory by up to 7.3 times. Our code is available at https://github.com/YupengSu/MuonQ.

While Large Language Models (LLMs) have achieved near-perfect performance in solving high-school mathematics, their ability to evaluate the diverse reasoning processes of real human students remains under-examined. To bridge this gap, we introduce RealMath-Eval, a rigorously annotated benchmark of 224 real-world exam responses from high schools. Our initial evaluation reveals that even state-of-the-art LLM judges struggle significantly on this task, exhibiting a high Mean Squared Error (sim2.96) against expert human grading. To probe a plausible explanation, we contrast this performance with a control setting where the same judges evaluate synthetic LLM-generated solutions. We identify a stark ``Evaluation Gap'': judges are considerably more accurate and consistent on synthetic text (MSE sim1.17) but struggle to generalize to authentic student reasoning. Through semantic embedding analysis, we find that synthetic errors suffer from a ``structural collapse'' into predictable, low-dimensional linear subspaces, whereas human errors form a more diverse error space. Furthermore, generative probability probes suggest that human reasoning involves significantly higher information-theoretic surprisal, indicating that student reasoning transitions are more out-of-distribution for current models. Finally, we find that surface-level style transfer fails to close this gap. Our findings suggest that current LLM evaluation pipelines relying heavily on synthetic data may not adequately capture the diversity of authentic student mathematical reasoning.

Vision-language action (VLA) models increasingly adopt chunked action heads to satisfy real-time constraints; however, this introduces boundary jitter: overlapping regions between consecutive chunks often yield inconsistent predictions, degrading temporal coherence and the task success rate. Existing methods, such as inference-time blending, merely reweight mismatched proposals without correcting underlying errors, leading to residual accumulation under biased or noisy histories. We propose ChunkFlow, a seam-aware training-and-execution framework for chunked policies that aligns chunk structure with boundary execution. It partitions each chunk into frozen, editable, and future zones, applies deterministic overlap blending at execution, and trains raw predictions with seam and first- and second-order continuity losses. History corruption and scheduled sampling improve robustness to executed-history errors, while an AWAC fine-tuning stage adapts the policy without removing these structural regularizers. Under mild smoothness assumptions, pre-blending seam discrepancies provably decay with increasing overlap. Experiments on CALVIN, LIBERO, and real robots show an improved success-stability trade-off with low-latency inference. Project page: https://cytoderm-ai.github.io/chunkflow.

Diffusion models have achieved impressive generative quality across modalities like 2D images, videos, and 3D shapes, but their inference remains computationally expensive due to the iterative denoising process. While recent caching-based methods effectively reuse redundant computations to speed up 2D and video generation, directly applying these techniques to 3D diffusion models can severely disrupt geometric consistency. In 3D synthesis, even minor numerical errors in cached latent features accumulate, causing structural artifacts and topological inconsistencies. To overcome this limitation, we propose Fast3Dcache, a training-free geometry-aware caching framework that accelerates 3D diffusion inference while preserving geometric fidelity. Our method introduces a Predictive Caching Scheduler Constraint (PCSC) to dynamically determine cache quotas according to voxel stabilization patterns and a Spatiotemporal Stability Criterion (SSC) to select stable features for reuse based on velocity magnitude and acceleration criterion. Comprehensive experiments show that Fast3Dcache accelerates inference significantly, achieving up to a 27.12% speed-up and a 54.8% reduction in FLOPs, with minimal degradation in geometric quality as measured by Chamfer Distance (2.48%) and F-Score (1.95%).

Recent works on structured text translation remain limited to the sentence level, as they struggle to effectively handle the complex document-level XML or HTML structures. To address this, we propose Format Reinforcement Learning (FormatRL), which employs Group Relative Policy Optimization on top of a supervised fine-tuning model to directly optimize novel structure-aware rewards: 1) TreeSim, which measures structural similarity between predicted and reference XML trees and 2) Node-chrF, which measures translation quality at the level of XML nodes. Additionally, we apply StrucAUC, a fine-grained metric distinguishing between minor errors and major structural failures. Experiments on the SAP software-documentation benchmark demonstrate improvements across six metrics and an analysis further shows how different reward functions contribute to improvements in both structural and translation quality.

Modern software systems require code that is not only functional but also maintainable and well-structured. Although Large Language Models (LLMs) are increasingly used to automate software development, most studies focus on isolated, single-agent function-level generation. This work examines how process structure and role specialization shape multi-agent LLM workflows for class-level code generation. We simulate a Waterfall-style development cycle covering Requirement, Design, Implementation, and Testing using three LLMs (GPT-4o-mini, DeepSeek-Chat, and Claude-3.5-Haiku) on 100 Python tasks from the ClassEval benchmark. Our findings show that multi-agent workflows reorganize, rather than consistently enhance, model performance. Waterfall-style collaboration produces cleaner and more maintainable code but often reduces functional correctness (-37.8\% for GPT-4o-mini and -39.8\% for DeepSeek-Chat), with Claude-3.5-Haiku as a notable exception (+9.5\%). Importantly, process constraints shift failure characteristics: structural issues such as missing code decrease, while semantic and validation errors become more frequent. Among all stages, Testing exerts the strongest influence by improving verification coverage but also introducing new reasoning failures, whereas Requirement and Design have comparatively modest effects. Overall, this study provides empirical evidence that software process structure fundamentally alters how LLMs reason, collaborate, and fail, revealing inherent trade-offs between rigid workflow discipline and flexible problem-solving in multi-agent code generation.

Reliable co-speech motion generation requires precise motion representation and consistent structural priors across all joints. Existing generative methods typically operate on local joint rotations, which are defined hierarchically based on the skeleton structure. This leads to cumulative errors during generation, manifesting as unstable and implausible motions at end-effectors. In this work, we propose GlobalDiff, a diffusion-based framework that operates directly in the space of global joint rotations for the first time, fundamentally decoupling each joint's prediction from upstream dependencies and alleviating hierarchical error accumulation. To compensate for the absence of structural priors in global rotation space, we introduce a multi-level constraint scheme. Specifically, a joint structure constraint introduces virtual anchor points around each joint to better capture fine-grained orientation. A skeleton structure constraint enforces angular consistency across bones to maintain structural integrity. A temporal structure constraint utilizes a multi-scale variational encoder to align the generated motion with ground-truth temporal patterns. These constraints jointly regularize the global diffusion process and reinforce structural awareness. Extensive evaluations on standard co-speech benchmarks show that GlobalDiff generates smooth and accurate motions, improving the performance by 46.0 % compared to the current SOTA under multiple speaker identities.

The success of long short-term memory (LSTM) neural networks in language processing is typically attributed to their ability to capture long-distance statistical regularities. Linguistic regularities are often sensitive to syntactic structure; can such dependencies be captured by LSTMs, which do not have explicit structural representations? We begin addressing this question using number agreement in English subject-verb dependencies. We probe the architecture's grammatical competence both using training objectives with an explicit grammatical target (number prediction, grammaticality judgments) and using language models. In the strongly supervised settings, the LSTM achieved very high overall accuracy (less than 1% errors), but errors increased when sequential and structural information conflicted. The frequency of such errors rose sharply in the language-modeling setting. We conclude that LSTMs can capture a non-trivial amount of grammatical structure given targeted supervision, but stronger architectures may be required to further reduce errors; furthermore, the language modeling signal is insufficient for capturing syntax-sensitive dependencies, and should be supplemented with more direct supervision if such dependencies need to be captured.

This work presents a modular and hierarchical approach to learn policies for exploring 3D environments, called `Active Neural SLAM'. Our approach leverages the strengths of both classical and learning-based methods, by using analytical path planners with learned SLAM module, and global and local policies. The use of learning provides flexibility with respect to input modalities (in the SLAM module), leverages structural regularities of the world (in global policies), and provides robustness to errors in state estimation (in local policies). Such use of learning within each module retains its benefits, while at the same time, hierarchical decomposition and modular training allow us to sidestep the high sample complexities associated with training end-to-end policies. Our experiments in visually and physically realistic simulated 3D environments demonstrate the effectiveness of our approach over past learning and geometry-based approaches. The proposed model can also be easily transferred to the PointGoal task and was the winning entry of the CVPR 2019 Habitat PointGoal Navigation Challenge.

Chemical reasoning inherently integrates visual, textual, and symbolic modalities, yet existing benchmarks rarely capture this complexity, often relying on simple image-text pairs with limited chemical semantics. As a result, the actual ability of Multimodal Large Language Models (MLLMs) to process and integrate chemically meaningful information across modalities remains unclear. We introduce ChemVTS-Bench, a domain-authentic benchmark designed to systematically evaluate the Visual-Textual-Symbolic (VTS) reasoning abilities of MLLMs. ChemVTS-Bench contains diverse and challenging chemical problems spanning organic molecules, inorganic materials, and 3D crystal structures, with each task presented in three complementary input modes: (1) visual-only, (2) visual-text hybrid, and (3) SMILES-based symbolic input. This design enables fine-grained analysis of modality-dependent reasoning behaviors and cross-modal integration. To ensure rigorous and reproducible evaluation, we further develop an automated agent-based workflow that standardizes inference, verifies answers, and diagnoses failure modes. Extensive experiments on state-of-the-art MLLMs reveal that visual-only inputs remain challenging, structural chemistry is the hardest domain, and multimodal fusion mitigates but does not eliminate visual, knowledge-based, or logical errors, highlighting ChemVTS-Bench as a rigorous, domain-faithful testbed for advancing multimodal chemical reasoning. All data and code will be released to support future research.

Autonomous web agents promise to automate everyday browsing tasks, but inherit one of the web's oldest attack surfaces. Cross-Site Scripting proved that mixing trusted and untrusted content is dangerous, even on benign pages. Agents resurface this risk by interpreting natural language as instructions, allowing third-party and user-generated content to hijack the agent via prompt injection. The core challenge is that deriving a task-specific security policy requires reasoning over page structure that is entangled with the attacker's content. We present Prismata, a defense enforcing contextual least privilege for web agents, constraining both what the agent sees and what it can do. Prismata's dynamic trust derivation produces permission labels for page content, with structural confinement guarantees, inspired by classical integrity models, that bound any labeling errors so that labels can only decrease in privilege and mislabelings are bounded. Prismata's mechanical confinement enforces these labels by redacting content and restricting agent capabilities. Importantly, these mechanisms require no developer annotations, so Prismata supports the long tail of websites. Across recent published web agent attacks, including adaptive variants, Prismata substantially reduces attack success while preserving benign task utility.

Document parsing converts document images into structured content and requires reliable performance across diverse layouts and acquisition conditions. Yet training corpora are biased toward common document types and clean digital pages, while expanding coverage alone does not specify how to address a parser's remaining weaknesses. We present WeVisDoc, a two-stage data-centric framework for robust end-to-end document parsing. Stage I broadens semantic, structural, and appearance coverage through heterogeneous data and structure-preserving degradation synthesis. Stage II uses a held-out probe to measure the Stage I parser's residual errors within fixed visual-structural clusters. These diagnostics guide targeted data construction and reallocation of the target-token budget. WeVisDoc-4B achieves an Overall score of 95.38 on OmniDocBench v1.6 and a mean Overall score of 75.54 across the three PureDocBench tracks, ranking first among the compared end-to-end parsers in all four settings. Compared with Stage I, Stage II improves Overall scores for the 2B and 4B models on both benchmarks, with larger gains on the degraded PureDocBench tracks, including a 4.03-point gain for the 4B model on the Real Degraded track.

Recently, the visual generation ability by GPT-4o(mni) has been unlocked by OpenAI. It demonstrates a very remarkable generation capability with excellent multimodal condition understanding and varied task instructions. In this paper, we aim to explore the capabilities of GPT-4o across various tasks. Inspired by previous study, we constructed a task taxonomy along with a carefully curated set of test samples to conduct a comprehensive qualitative test. Benefiting from GPT-4o's powerful multimodal comprehension, its image-generation process demonstrates abilities surpassing those of traditional image-generation tasks. Thus, regarding the dimensions of model capabilities, we evaluate its performance across six task categories: traditional image generation tasks, discriminative tasks, knowledge-based generation, commonsense-based generation, spatially-aware image generation, and temporally-aware image generation. These tasks not only assess the quality and conditional alignment of the model's outputs but also probe deeper into GPT-4o's understanding of real-world concepts. Our results reveal that GPT-4o performs impressively well in general-purpose synthesis tasks, showing strong capabilities in text-to-image generation, visual stylization, and low-level image processing. However, significant limitations remain in its ability to perform precise spatial reasoning, instruction-grounded generation, and consistent temporal prediction. Furthermore, when faced with knowledge-intensive or domain-specific scenarios, such as scientific illustrations or mathematical plots, the model often exhibits hallucinations, factual errors, or structural inconsistencies. These findings suggest that while GPT-4o marks a substantial advancement in unified multimodal generation, there is still a long way to go before it can be reliably applied to professional or safety-critical domains.

Multi-agent systems (MAS) are increasingly capable of tackling complex real-world tasks, yet their reliance on inter-agent coordination, tool use, and long-horizon reasoning makes error recognition particularly challenging. Minor errors can propagate across agents, escalating into task failures while producing long, intertwined execution trajectories that impose significant costs for both human developers and automated systems to debug and analyze. Our key insight is that, despite surface differences in failure trajectories (e.g., logs), MAS errors often recur with similar structural patterns. This paper presents CORRECT, the first lightweight, training-free framework that leverages an online cache of distilled error schemata to recognize and transfer knowledge of failure structures across new requests. This cache-based reuse allows LLMs to perform targeted error localization at inference time, avoiding the need for expensive retraining while adapting to dynamic MAS deployments in subseconds. To support rigorous study in this domain, we also introduce CORRECT-Error, a large-scale dataset of over 2,000 annotated trajectories collected through a novel error-injection pipeline guided by real-world distributions, and further validated through human evaluation to ensure alignment with natural failure patterns. Experiments across seven diverse MAS applications show that CORRECT improves step-level error localization up to 19.8% over existing advances while at near-zero overhead, substantially narrowing the gap between automated and human-level error recognition.

Converting natural language questions into SQL queries (Text-to-SQL) enables non-expert users to interact with relational databases and has long been a central task for natural language interfaces to data. While the WikiSQL dataset played a key role in early NL2SQL research, its usage has declined due to structural and annotation issues, including case sensitivity inconsistencies, data type mismatches, syntax errors, and unanswered questions. We present LLMSQL, a systematic revision and transformation of WikiSQL designed for the LLM era. We classify these errors and implement automated methods for cleaning and re-annotation. To assess the impact of these improvements, we evaluated multiple large language models (LLMs), including Gemma 3, LLaMA 3.2, Mistral 7B, gpt-oss 20B, Phi-3.5 Mini, Qwen 2.5, OpenAI o4-mini, DeepSeek R1 and others. Rather than serving as an update, LLMSQL is introduced as an LLM-ready benchmark: unlike the original WikiSQL, tailored for pointer-network models selecting tokens from input, LLMSQL provides clean natural language questions and full SQL queries as plain text, enabling straightforward generation and evaluation for modern natural language-to-SQL models.

Recent advances in Large Language Models (LLMs) have significantly improved the field of Document AI, demonstrating remarkable performance on document understanding tasks such as question answering. However, existing approaches primarily focus on solving specific tasks, lacking the capability to structurally organize and manage document information. To address this limitation, we propose Revise, a framework that systematically corrects errors introduced by OCR at the character, word, and structural levels. Specifically, Revise employs a comprehensive hierarchical taxonomy of common OCR errors and a synthetic data generation strategy that realistically simulates such errors to train an effective correction model. Experimental results demonstrate that Revise effectively corrects OCR outputs, enabling more structured representation and systematic management of document contents. Consequently, our method significantly enhances downstream performance in document retrieval and question answering tasks, highlighting the potential to overcome the structural management limitations of existing Document AI frameworks.

LLM-based autonomous agents have demonstrated strong capabilities in reasoning, planning, and tool use, yet remain limited when tasks require sustained coordination across roles, tools, and environments. Multi-agent systems address this through structured collaboration among specialized agents, but tighter coordination also amplifies a less explored risk: errors can propagate across agents and interaction rounds, producing failures that are difficult to diagnose and rarely translate into structural self-improvement. Existing surveys cover individual agent capabilities, multi-agent collaboration, or agent self-evolution separately, leaving the causal dependencies among them unexamined. This survey provides a unified review organized around four causally linked stages, which we term the LIFE progression: Lay the capability foundation, Integrate agents through collaboration, Find faults through attribution, and Evolve through autonomous self-improvement. For each stage, we provide systematic taxonomies and formally characterize the dependencies between adjacent stages, revealing how each stage both depends on and constrains the next. Beyond synthesizing existing work, we identify open challenges at stage boundaries and propose a cross-stage research agenda for closed-loop multi-agent systems capable of continuously diagnosing failures, reorganizing structures, and refining agent behaviors, extending current coordination frameworks toward more self-organizing forms of collective intelligence. By bridging these previously fragmented research threads, this survey aims to offer both a systematic reference and a conceptual roadmap toward autonomous, self-improving multi-agent intelligence.

Autoregressive video diffusion enables efficient streaming and long-horizon video generation, but repeatedly reusing generated latents as causal context can amplify temporal errors, resulting in flickering, motion jitter, and structural drift. In this paper, we investigate this failure mode from a spectral kinematic perspective and identify discrete latent acceleration as an effective signal for revealing unstable high-frequency temporal perturbations. To this end, we propose SAGA, a training-free \textit{s}table \textit{a}cceleration \textit{g}uidance approach for \textit{a}utoregressive video generation. SAGA integrates an acceleration domain spectral guidance objective based on finite-window Slepian projections with a structured autoregressive noise initialization strategy that suppresses short-range temporal correlations while preserving long-range motion structure. Without retraining or modifying the backbone, SAGA can be directly applied to existing chunk-wise autoregressive diffusion models, which is the prevalent setting for high-quality generation. Extensive experiments show that SAGA consistently improves temporal quality across multiple autoregressive diffusion models. On Self-Forcing, SAGA improves Temporal Quality from 97.30 to 97.91 and Image Quality from 69.60 to 70.51. Moreover, spectral analysis and human preference studies demonstrate that SAGA reduces temporal instability while maintaining visual fidelity.

Neural operators that accept arbitrary meshes are often treated as geometry-general, but unseen domain topology changes both the invariant and decaying subspaces of a PDE operator. We use Hodge heat flow as a controlled lens on this distinction and introduce TopoBox-3D, where tunnels and cavities vary Betti support while the exact Hodge decomposition separates the harmonic kernel from the positive spectrum. Across six architectures, models that infer topology implicitly suffer excess matched degradation in 37 of 45 model--task topology-OOD cells, yet cases that change harmonic dimension are not more strongly penalized on average. The dominant difficulty is instead spectral: the initial Rayleigh quotient is the most stable predictor of error, and spectral broadening adds information for edge and face cochains. Most strikingly, controlled probes show that explicit incidence and harmonic coordinates do not yield the best kernel-identity accuracy; nevertheless, TNO ranks first in mixed-input nonharmonic accuracy on all six tasks with nontrivial harmonic support. Together, these results establish topology as a distinct generalization axis beyond arbitrary-geometry compatibility and show that its influence extends across the Hodge spectrum rather than remaining confined to the harmonic kernel. More broadly, they suggest that global, low-frequency structural priors may help organize predictions in the faster-decaying complementary component, offering a new perspective on how neural operators may generalize across topology as well as geometry.

In realistic education, a solution is often expressed not only in words but in a drawing--a circuit, a geometric construction, a function plot--and a teacher must grade the drawing as carefully as the text. Recent advances in unified multimodal models have enabled scientific image generation, yet verifying the correctness of these specialized visual outputs remains a critical bottleneck: errors often arise from intricate domain knowledge, structural reasoning, and multi-step instruction rather than surface-level artifacts. Existing verifiers mainly target natural images and compress judgement into scalar scores, leaving scientific coverage and explainable feedback for error correction underexplored. To bridge this gap, we make three main contributions. (1) We construct SciGen-Verify, a benchmark dedicated to explainable verification of scientific image generation, spanning instruction following, multidisciplinary reasoning, and world knowledge domains. It contains a three-tier hierarchical protocol over the binary judgement, supporting explanation, and corrective editing instruction. (2) We develop SciGen-Verifier, a reasoning-driven multimodal verifier trained via cold-start supervised fine-tuning followed by a curriculum-based two-stage reinforcement learning pipeline. The rubric-guided process rewards first strengthen scientific reasoning exploration and outcome rewards subsequently align output with ground-truth annotation. (3) On SciGen-Verify, SciGen-Verifier achieves competitive performance against much larger proprietary models. It further serves as a practical online critic for iterative image rectification.

Uncertainty estimation is essential for enhancing the reliability of Large Language Models (LLMs), particularly in high-stakes applications. Existing methods often overlook semantic dependencies, relying on token-level probability measures that fail to capture structural relationships within the generated text. We propose GENUINE: Graph ENhanced mUlti-level uncertaINty Estimation for Large Language Models, a structure-aware framework that leverages dependency parse trees and hierarchical graph pooling to refine uncertainty quantification. By incorporating supervised learning, GENUINE effectively models semantic and structural relationships, improving confidence assessments. Extensive experiments across NLP tasks show that GENUINE achieves up to 29% higher AUROC than semantic entropy-based approaches and reduces calibration errors by over 15%, demonstrating the effectiveness of graph-based uncertainty modeling. The code is available at https://github.com/ODYSSEYWT/GUQ.

Realistic and controllable panoramic LiDAR data generation is critical for scalable 3D perception in autonomous driving and robotics. Existing methods either perform unconditional generation with poor controllability or adopt text-guided synthesis, which lacks fine-grained spatial control. Leveraging a monocular RGB image as a spatial control signal offers a scalable and low-cost alternative, which remains an open problem. However, it faces three core challenges: (i) semantic and depth cues from RGB are vary spatially, complicating reliable conditioning generation; (ii) modality gaps between RGB appearance and LiDAR geometry amplify alignment errors under noisy diffusion; and (iii) maintaining structural coherence between monocular RGB and panoramic LiDAR is challenging, particularly in non-overlap regions between images and LiDAR. To address these challenges, we propose Veila, a novel conditional diffusion framework that integrates: a Confidence-Aware Conditioning Mechanism (CACM) that strengthens RGB conditioning by adaptively balancing semantic and depth cues according to their local reliability; a Geometric Cross-Modal Alignment (GCMA) for robust RGB-LiDAR alignment under noisy diffusion; and a Panoramic Feature Coherence (PFC) for enforcing global structural consistency across monocular RGB and panoramic LiDAR. Additionally, we introduce two metrics, Cross-Modal Semantic Consistency and Cross-Modal Depth Consistency, to evaluate alignment quality across modalities. Experiments on nuScenes, SemanticKITTI, and our proposed KITTI-Weather benchmark demonstrate that Veila achieves state-of-the-art generation fidelity and cross-modal consistency, while enabling generative data augmentation that improves downstream LiDAR semantic segmentation.

Visual Text Rendering (VTR) remains a critical challenge in text-to-image generation, where even advanced models frequently produce text with structural anomalies such as distortion, blurriness, and misalignment. However, we find that leading MLLMs and specialist OCR models largely fail to perceive these structural anomalies, creating a critical bottleneck for both VTR evaluation and RL-based optimization. As a result, even state-of-the-art generators (e.g., SeedDream4.0, Qwen-Image) still struggle to render structurally faithful text. To address this, we propose TextPecker, a plug-and-play structural anomaly perceptive RL strategy that mitigates noisy reward signals and works with any textto-image generator. To enable this capability, we construct a recognition dataset with character-level structural-anomaly annotations and develop a stroke-editing synthesis engine to expand structural-error coverage. Experiments show that TextPecker consistently improves diverse text-to-image models; even on the well-optimized Qwen-Image, it significantly yields average gains of 4% in structural fidelity and 8.7% in semantic alignment for Chinese text rendering, establishing a new state-of-the-art in high-fidelity VTR. Our work fills a gap in VTR optimization, providing a foundational step towards reliable and structural faithful visual text generation.

Inverse protein folding -- the task of predicting a protein sequence from its backbone atom coordinates -- has surfaced as an important problem in the "top down", de novo design of proteins. Contemporary approaches have cast this problem as a conditional generative modelling problem, where a large generative model over protein sequences is conditioned on the backbone. While these generative models very rapidly produce promising sequences, independent draws from generative models may fail to produce sequences that reliably fold to the correct backbone. Furthermore, it is challenging to adapt pure generative approaches to other settings, e.g., when constraints exist. In this paper, we cast the problem of improving generated inverse folds as an optimization problem that we solve using recent advances in "deep" or "latent space" Bayesian optimization. Our approach consistently produces protein sequences with greatly reduced structural error to the target backbone structure as measured by TM score and RMSD while using fewer computational resources. Additionally, we demonstrate other advantages of an optimization-based approach to the problem, such as the ability to handle constraints.

Automatic prompt engineering (APE) rewrites prompts to improve downstream task performance, but existing APE loops treat the optimizer itself as a fixed pipeline. We port the code-as-action paradigm of CodeAct (Wang et al., 2024a) to APE and propose SPEAR (Sandboxed Prompt Engineer with Active Roll-back), a free-form agentic optimizer with four tools -- evaluate, python, set_prompt, finish -- that decides autonomously how and when to use them. The distinctive tool is the Python sandbox: the optimizer writes and executes arbitrary Python on the current evaluation DataFrame, performing structural error analysis (confusion matrices, error clustering, per group metrics) the agent itself authors. Two guardrails turn the long-horizon agent into a monotone-improving optimizer: auto-rollback on metric regression, and an optional guard metric floor. We evaluate on three industrial LLM-as-judge suites (13 judge tasks across recruiter-intake, conversational-memory, and query-refinement systems) plus seven BBH tasks and GSM8K. SPEAR wins every industrial task on the primary metric (κ 0.857 vs 0.359 on tool-selection; F1-macro 0.815 vs 0.763 on filter-relevance; κ 0.254 vs 0.218 on the hardest extraction dimension). On BBH-7 SPEAR averages 0.938 accuracy vs GEPA 0.628 and TextGrad 0.484. Ablations show the Python tool is the largest single lever on complex judge tasks (Δapprox +0.79κ on the 5-class tool-selection judge, Δapprox +0.35κ on the hardest extraction dimension when removed); its irreplaceable contribution is class-pair confusion aggregation that a long-context LLM cannot extract reliably from the raw eval DataFrame.

We present a method for classifying syntactic errors in learner language, namely errors whose correction alters the morphosyntactic structure of a sentence. The methodology builds on the established Universal Dependencies syntactic representation scheme, and provides complementary information to other error-classification systems. Unlike existing error classification methods, our method is applicable across languages, which we showcase by producing a detailed picture of syntactic errors in learner English and learner Russian. We further demonstrate the utility of the methodology for analyzing the outputs of leading Grammatical Error Correction (GEC) systems.

In Grammatical Error Correction, systems are evaluated by the number of errors they correct. However, no one has assessed whether all error types are equally important. We provide and apply a method to quantify the importance of different grammatical error types to humans. We show that some rare errors are considered disturbing while other common ones are not. This affects possible directions to improve both systems and their evaluation.

Prior work has shown that fine-tuning models on a narrow domain with misaligned data can lead to broad misalignment - a phenomenon termed "emergent misalignment" (Betley et al. 2025). While all tested models were susceptible to emergent misalignment, some models showed more resistance than others. Specifically the Qwen-2.5 family proved to be relatively resistant, while GPT-4o exhibited the strongest misalignment. In this paper we evaluate if current-generation open-weights models exhibit similar resistance to the Qwen-2.5 family and measure misalignment robustness over a range of model architectures and scales. We replicate the effect across nine modern open-weights models (Gemma 3 and Qwen 3 families, 1B-32B parameters). Models fine-tuned on insecure code generation show a 0.68% misalignment rate (compared to 0.07% for base models), matching the lower end of prior open-model results but dramatically lower than GPT-4o's 20%. We identify a critical format-dependent vulnerability: requiring JSON output doubles misalignment rates compared to natural language prompts (0.96% vs 0.42%). This suggests that structural constraints may bypass safety training by reducing the model's 'degrees of freedom' to refuse. These findings confirm emergent misalignment as a reproducible phenomenon in modern open-weights models, with rates substantially lower than observed in proprietary systems.

Addressing a structural-engineering request requires more than a single answer; it requires a chain of interdependent artifacts: interpreted requirements, a computable model, validation records, solver outputs, code-check records, and a final report. Evaluations centered on question answering or script generation rarely verify this complete evidence chain and may therefore reward fluent outputs even when the underlying engineering workflow is incomplete, internally inconsistent, or non-executable. To address this limitation, we present StructureClaw, an artifact-centered workbench in which LLM agents operate through governed engineering skills, typed tools, shared artifact state, and local analysis backends. We also introduce StructureClaw-Bench, an executable benchmark of 150 controlled scenarios spanning standard workflow execution, interactive robustness, and multimodal structural-model reconstruction. A scenario succeeds only when all required artifact- and execution-level assertions pass in a single run. Across ten agent-model configurations, each evaluated on the same 50 standard cases, the average Success Rate rises from 56.8% with the generic-skill baseline to 88.6% with the full automatic workflow. The interactive and multimodal evaluations identify two prominent remaining challenges: safe handling of invalid numerical inputs and fixture-consistent reconstruction of structural models. These findings show that artifact-centered evaluation can expose workflow-level failures that are difficult to identify from final responses alone, providing a more rigorous basis for evaluating and improving structural-engineering agents. The code and benchmark are available at https://github.com/structureclaw/structureclaw.

Despite the power of Large Language Models (LLMs) like GPT-4, they still struggle with tasks that require generating complex, structured outputs. In this study, we assess the capability of Current LLMs in generating complex structured data and propose a structure-aware fine-tuning approach as a solution to improve this ability. To perform a comprehensive evaluation, we propose Struc-Bench, include five representative LLMs (i.e., GPT-NeoX 20B, GPT-3.5, GPT-4, and Vicuna) and evaluate them on our carefully constructed datasets spanning raw text, HTML, and LaTeX tables. Based on our analysis of current model performance, we identify specific common formatting errors and areas of potential improvement. To address complex formatting requirements, we utilize FormatCoT (Chain-of-Thought) to generate format instructions from target outputs. Our experiments show that our structure-aware fine-tuning method, when applied to LLaMA-7B, significantly improves adherence to natural language constraints, outperforming other evaluated LLMs. Based on these results, we present an ability map of model capabilities from six dimensions (i.e., coverage, formatting, reasoning, comprehension, pragmatics, and hallucination). This map highlights the weaknesses of LLMs in handling complex structured outputs and suggests promising directions for future work. Our code and models can be found at https://github.com/gersteinlab/Struc-Bench.

Large Language Models (LLM) benchmarks tell us when models fail, but not why they fail. A wrong answer on a reasoning dataset may stem from formatting issues, calculation errors, or dataset noise rather than weak reasoning. Without disentangling such causes, benchmarks remain incomplete and cannot reliably guide model improvement. We introduce ErrorMap, the first method to chart the sources of LLM failure. It extracts a model's unique "failure signature", clarifies what benchmarks measure, and broadens error identification to reduce blind spots. This helps developers debug models, aligns benchmark goals with outcomes, and supports informed model selection. ErrorMap works on any model or dataset with the same logic. Applying our method to 35 datasets and 83 models we generate ErrorAtlas, a taxonomy of model errors, revealing recurring failure patterns. ErrorAtlas highlights error types that are currently underexplored in LLM research, such as omissions of required details in the output and question misinterpretation. By shifting focus from where models succeed to why they fail, ErrorMap and ErrorAtlas enable advanced evaluation - one that exposes hidden weaknesses and directs progress. Unlike success, typically measured by task-level metrics, our approach introduces a deeper evaluation layer that can be applied globally across models and tasks, offering richer insights into model behavior and limitations. We make the taxonomy and code publicly available with plans to periodically update ErrorAtlas as new benchmarks and models emerge.

A large share of day-to-day work in professional domains happens inside PDF files: benefits packets, leases, datasheets, clinical guidelines, construction plans. Benchmarks for document AI have generally measured the required capabilities in isolation: OCR, layout analysis, chart reasoning, table QA, document VQA. A high score on any one of them does not necessarily reveal whether a model can answer a realistic question that someone in the field would actually ask about a specific PDF. GDP_pdf is a benchmark built to measure this directly. It consists of question-document pairs authored by working professionals in ten fields, and a candidate question was kept only when at least two frontier multimodal models failed it in a way that mattered: a wrong answer, missed decisive evidence, or a fabricated claim, rather than a superficial difference such as style. Each item comes with a rubric of atomic criteria, so we can report a graded rubric score as well as a strict task-level pass rate, and each item is tagged against a taxonomy of eleven capabilities in three tiers, spanning text extraction and grounding, table and chart comprehension, cross-referencing, spatial reasoning, and abstention on unsupported queries. We report results for seventeen frontier models on the 100-item benchmark: the best model passes only 30.7% of the items and the worst passes 2%. Most errors trace back to a small set of recurring loss patterns: misaligned tables, misread charts, skipped footnotes and exclusions, miscounted floor-plan symbols, scan noise, and amendments that supersede earlier text.

Speech-based applications pass spoken queries through automatic speech recognition (ASR) before any retrieval module, so ASR errors enter the pipeline as a fixed upstream constraint. We empirically test whether two extensions to standard retrieval-augmented generation (RAG), entity-graph linking and iterative reformulation, absorb or amplify these errors. Using four English accents synthesized through neural TTS, we evaluate four RAG configurations on three multi-hop QA benchmarks (HotpotQA, 2WikiMultiHopQA and MuSiQue) against a clean-text oracle. Although the structurally richer configurations generally retain higher absolute F1 under ASR input, both extensions amplify the error: the F1 gap from clean text to the highest-WER accent is 36-67% larger under their combination than under naive dense retrieval, on all three benchmarks. The dominant failure mode is corruption of one or more query entities, accounting for 87-96% of degradation cases on 2WikiMultiHopQA across all four methods. Two lightweight surface-form mitigations leave most of the gap intact, indicating that downstream retrieval structure amplifies remaining entity errors. We release code and data at https://github.com/ZhenghuaBao/spoken-multihop-rag .

Large language models (LLMs) have demonstrated remarkable reasoning capability in solving mathematical problems. However, existing approaches primarily focus on improving the quality of correct training data, e.g., distilling high-quality correct solutions from advanced models, neglecting the value contained in error data, potentially hindering the model's reflective ability. Though some studies attempt to leverage error data, they often involve complex mechanisms, such as Monte Carlo Tree Search (MCTS) to explore error nodes. In this work, we propose to enhance LLMs' reasoning ability by Learning from Errors for Mathematical Advancement (LEMMA). LEMMA constructs data consisting of an incorrect solution with an erroneous step and a reflection connection to a correct solution for fine-tuning. Specifically, we systematically analyze the model-generated error types and introduce an error-type grounded mistake augmentation method to collect diverse and representative errors. Correct solutions are either from fixing the errors or generating a fresh start. Through a model-aware smooth reflection connection, the erroneous solution is transferred to the correct one. By fine-tuning on the constructed dataset, the model is able to self-correct errors autonomously within the generation process without relying on external critique models. Experimental results demonstrate that LEMMA achieves significant performance improvements over other strong baselines.

Can small language models achieve strong tool-use performance without complex adaptation mechanisms? This paper investigates this question through Meta-Tool, a controlled empirical study comparing hypernetwork-based LoRA adaptation against carefully designed few-shot prompting. Using a Llama-3.2-3B-Instruct backbone, we evaluate four adaptation mechanisms--few-shot prompting, documentation encoding, hypernetwork-generated LoRA weights, and value-guided beam search--across four diverse benchmarks: Gorilla APIBench, Spider 2.0, WebArena, and InterCode. Our central finding is a well-supported negative result: despite generating non-trivial weight matrices, the 227.8M-parameter hypernetwork provides no measurable improvement over few-shot prompting alone. Comprehensive ablation studies reveal that few-shot examples contribute +21.5% to performance and documentation contributes +5.0%, while the hypernetwork adds 0%. A 3B model with well-designed prompts achieves 79.7% of GPT-5's average performance at 10 times lower latency. Error analysis across 722 failure cases spanning all shot counts (0--5) shows that at the 5-shot configuration (106 failures), failure modes are task-dependent: schema-heavy tasks (Spider 2.0, WebArena) show near-zero format errors with remaining failures semantic, while format errors dominate on Gorilla (100%) and InterCode (70%). These findings redirect practitioners toward prompt engineering and example curation rather than complex adaptation architectures.

With the growing adoption of Large Language Model (LLM) agents in persistent, real-world roles, they naturally encounter continuous streams of tasks and inevitable failures. A key limitation, however, is their inability to systematically learn from these mistakes, forcing them to repeat identical errors in similar contexts. Unlike prior training-free methods that primarily store raw instance-level experience or focus on retrieving successful trajectories, we propose Mistake Notebook Learning (MNL), a novel memory framework that enables agents to self-curate generalizable guidance from batch-clustered failures. This mechanism allows agents to distill shared error patterns into structured "mistake notes," updating an external memory only when batch performance improves to ensure stability. To further amplify adaptability, we integrate MNL with test-time scaling, leveraging aggregated failure patterns to actively steer the search process away from known pitfalls. Experiments on mathematical reasoning, Text-to-SQL, and interactive agent benchmarks show that MNL achieves competitive performance compared to existing memory mechanisms and in-context methods in both effectiveness and efficiency. These findings position structured mistake abstraction as a critical lever for robust agent evolution, enabling continuous improvement without the cost of parameter updates. The code is available at https://github.com/Bairong-Xdynamics/MistakeNotebookLearning/tree/main.

Recent works have shown the benefits to LLMs from fine-tuning golden-standard Chain-of-Thought (CoT) rationales or using them as correct examples in few-shot prompting. While humans can indeed imitate correct examples, learning from our mistakes is another vital aspect of human cognition. Hence, a question naturally arises: can LLMs learn and benefit from their mistakes, especially for their reasoning? This study investigates this problem from both the prompting and model-tuning perspectives. We begin by introducing CoTErrorSet, a new benchmark with 609,432 questions, each designed with both correct and error references, and demonstrating the types and reasons for making such mistakes. To explore the effectiveness of those mistakes, we design two methods: (1) Self-rethinking prompting guides LLMs to rethink whether they have made similar previous mistakes; and (2) Mistake tuning involves finetuning models in both correct and incorrect reasoning domains, rather than only tuning models to learn ground truth in traditional methodology. We conduct a series of experiments to prove LLMs can obtain benefits from mistakes in both directions. Our two methods offer potentially cost-effective strategies by leveraging errors to enhance reasoning capabilities, which costs significantly less than creating meticulously hand-crafted golden references. We ultimately make a thorough analysis of the reasons behind LLMs' errors, which provides directions that future research needs to overcome. CoTErrorSet will be published soon on \url{https://github.com/YookiTong/Learn-from-Mistakes-CotErrorSet}.

As Multimodal Large Language Models (MLLMs) evolve into sophisticated interactive assistants, their reliability depends not only on following instructions but also on validating them. We define Proactive Critique as the model's autonomous ability to identify, analyze and fix faulty user inputs without extra prompts. However, evaluations mainly test models under ideal circumstances or simple refusal behaviors, largely ignoring active error processing. To fill this gap, we propose MMPCBench, a comprehensive framework for evaluating MLLMs' proactive critique competence. It features a fine-grained taxonomy of 4 primary error types spanning 12 subcategories, ranging from cross-modal contradictions to missing visual premises. We adopt a hierarchical evaluation protocol to measure models' error detection, diagnosis and resolution performance, and apply alignment-aware metrics to assess the coherence between internal reasoning and final responses. Tests on 14 mainstream MLLMs show obvious weaknesses in proactive critique, especially in dealing with subtle visual anomalies. Notably, we identify a pervasive "consistency gap": reasoning models can often correctly identify and analyze errors during internal reasoning yet suppress these valid insights in final outputs to prioritize response compliance. The code and data is available at https://github.com/ALIENS32/MMPCBench.

Large language models (LLMs) possess impressive linguistic capabilities but often fail to faithfully retain factual knowledge, leading to hallucinations and unreliable outputs. Understanding LLMs' knowledge deficiencies by exhaustively evaluating against full-scale knowledge bases is computationally prohibitive, especially for closed-weight models. We propose stochastic error ascent (SEA), a scalable and efficient framework for discovering knowledge deficiencies (errors) in closed-weight LLMs under a strict query budget. Rather than naively probing all knowledge candidates, SEA formulates error discovery as a stochastic optimization process: it iteratively retrieves new high-error candidates by leveraging the semantic similarity to previously observed failures. To further enhance search efficiency and coverage, SEA employs hierarchical retrieval across document and paragraph levels, and constructs a relation directed acyclic graph to model error propagation and identify systematic failure modes. Empirically, SEA uncovers 40.7x more knowledge errors than Automated Capability Discovery and 26.7% more than AutoBencher, while reducing the cost-per-error by 599x and 9x, respectively. Human evaluation confirms the high quality of generated questions, while ablation and convergence analyses validate the contribution of each component in SEA. Further analysis on the discovered errors reveals correlated failure patterns across LLM families and recurring deficits, highlighting the need for better data coverage and targeted fine-tuning in future LLM development.

Large language models (LLMs) often produce errors, including factual inaccuracies, biases, and reasoning failures, collectively referred to as "hallucinations". Recent studies have demonstrated that LLMs' internal states encode information regarding the truthfulness of their outputs, and that this information can be utilized to detect errors. In this work, we show that the internal representations of LLMs encode much more information about truthfulness than previously recognized. We first discover that the truthfulness information is concentrated in specific tokens, and leveraging this property significantly enhances error detection performance. Yet, we show that such error detectors fail to generalize across datasets, implying that -- contrary to prior claims -- truthfulness encoding is not universal but rather multifaceted. Next, we show that internal representations can also be used for predicting the types of errors the model is likely to make, facilitating the development of tailored mitigation strategies. Lastly, we reveal a discrepancy between LLMs' internal encoding and external behavior: they may encode the correct answer, yet consistently generate an incorrect one. Taken together, these insights deepen our understanding of LLM errors from the model's internal perspective, which can guide future research on enhancing error analysis and mitigation.

Grammatical error correction (GEC) is the task of correcting typos, spelling, punctuation and grammatical issues in text. Approaching the problem as a sequence-to-sequence task, we compare the use of a common subword unit vocabulary and byte-level encoding. Initial synthetic training data is created using an error-generating pipeline, and used for finetuning two subword-level models and one byte-level model. Models are then finetuned further on hand-corrected error corpora, including texts written by children, university students, dyslexic and second-language writers, and evaluated over different error types and origins. We show that a byte-level model enables higher correction quality than a subword approach, not only for simple spelling errors, but also for more complex semantic, stylistic and grammatical issues. In particular, initial training on synthetic corpora followed by finetuning on a relatively small parallel corpus of real-world errors helps the byte-level model correct a wide range of commonly occurring errors. Our experiments are run for the Icelandic language but should hold for other similar languages, particularly morphologically rich ones.

Noise plagues many numerical datasets, where the recorded values in the data may fail to match the true underlying values due to reasons including: erroneous sensors, data entry/processing mistakes, or imperfect human estimates. We consider general regression settings with covariates and a potentially corrupted response whose observed values may contain errors. By accounting for various uncertainties, we introduced veracity scores that distinguish between genuine errors and natural data fluctuations, conditioned on the available covariate information in the dataset. We propose a simple yet efficient filtering procedure for eliminating potential errors, and establish theoretical guarantees for our method. We also contribute a new error detection benchmark involving 5 regression datasets with real-world numerical errors (for which the true values are also known). In this benchmark and additional simulation studies, our method identifies incorrect values with better precision/recall than other approaches.

This position paper argues that the machine learning community should prioritize early-stage quality assurance in annotation pipelines over the prevailing practice of late-stage validation. Data quality bottlenecks increasingly limit foundation model improvement, yet quality assurance research focuses almost exclusively on validation methods rather than validation timing. When validation occurs, not merely what methods are employed, fundamentally determines both error rates and annotation costs. This temporal neglect is puzzling given the well-established "shift-left" principle from software engineering, where empirical studies demonstrate 4--100x cost multipliers for defects detected in later stages (Boehm, 1981; Shull et al., 2002). Annotation pipelines exhibit analogous dynamics: errors caught before annotation begins cost a fraction of those discovered after review cycles complete. We propose a taxonomy of three QA trigger points, namely pre-annotation (T0), post-annotation (T1), and post-review (T2), that decompose annotation workflows into discrete validation opportunities. A parametric error-propagation model formalizes when timing affects final error rates versus only economics, making timing a measurable design variable rather than a configuration afterthought. A survey of 47 recent papers reveals that only 4% report when validation occurs, a striking gap given timing's demonstrated impact in adjacent fields. Without explicit attention to QA timing, the community risks optimizing validation methods while ignoring the structural variable that may matter most. Acting on this position requires three steps: researchers should report QA timing configurations alongside validation methods; annotation platforms should expose timing as a first-class parameter; and the community should run controlled experiments that measure stage-specific detection rates directly.

Program errors can occur in any type of programming, and can manifest in a variety of ways, such as unexpected output, crashes, or performance issues. And program error diagnosis can often be too abstract or technical for developers to understand, especially for beginners. The goal of this paper is to present a novel machine-learning approach for Multi-task Program Error Repair and Explanatory Diagnosis (mPRED). A pre-trained language model is used to encode the source code, and a downstream model is specifically designed to identify and repair errors. Programs and test cases will be augmented and optimized from several perspectives. Additionally, our approach incorporates a "chain of thoughts" method, which enables the models to produce intermediate reasoning explanations before providing the final correction. To aid in visualizing and analyzing the program structure, we use a graph neural network for program structure visualization. Overall, our approach offers a promising approach for repairing program errors across different programming languages and providing helpful explanations to programmers.

Tables condense key transactional and administrative information into compact layouts, but practical extraction requires more than text recognition: systems must also recover structure (rows, columns, merged cells, headers) and interpret roles such as line items, subtotals, and totals under common capture artifacts. Many existing resources for table structure recognition and TableVQA are built from clean digital-born sources or rendered tables, and therefore only partially reflect noisy administrative conditions. We introduce DenTab, a dataset of 2{,}000 cropped table images from dental estimates with high-quality HTML annotations, enabling evaluation of table recognition (TR) and table visual question answering (TableVQA) on the same inputs. DenTab includes 2{,}208 questions across eleven categories spanning retrieval, aggregation, and logic/consistency checks. We benchmark 16 systems, including 14 vision--language models (VLMs) and two OCR baselines. Across models, strong structure recovery does not consistently translate into reliable performance on multi-step arithmetic and consistency questions, and these reasoning failures persist even when using ground-truth HTML table inputs. To improve arithmetic reliability without training, we propose the Table Router Pipeline, which routes arithmetic questions to deterministic execution. The pipeline combines (i) a VLM that produces a baseline answer, a structured table representation, and a constrained table program with (ii) a rule-based executor that performs exact computation over the parsed table. The source code and dataset will be made publicly available at https://github.com/hamdilaziz/DenTab.

The rapid development of large language models (LLMs) has not only provided numerous opportunities but also presented significant challenges. This becomes particularly evident when LLMs inadvertently generate harmful or toxic content, either unintentionally or because of intentional inducement. Existing alignment methods usually direct LLMs toward the favorable outcomes by utilizing human-annotated, flawless instruction-response pairs. Conversely, this study proposes a novel alignment technique based on mistake analysis, which deliberately exposes LLMs to erroneous content to learn the reasons for mistakes and how to avoid them. In this case, mistakes are repurposed into valuable data for alignment, effectively helping to avoid the production of erroneous responses. Without external models or human annotations, our method leverages a model's intrinsic ability to discern undesirable mistakes and improves the safety of its generated responses. Experimental results reveal that our method outperforms existing alignment approaches in enhancing model safety while maintaining the overall utility.

Legal AI systems are increasingly used to answer legal questions, yet existing benchmarks assume queries arrive fully specified. In practice, users omit facts that materially determine the legal outcome. We introduce InsufficiencyBench, the first legal benchmark targeting query-side insufficiency: whether a model recognizes when a query lacks legally material information, identifies what is missing, and refrains from premature conclusions. We formalize a taxonomy of eight canonical missing-element categories across three structural failure modes---switch, gating, and fatal prerequisite--- and construct 202 benchmark items (58 base queries, 144 deficient variants) spanning six legal domains and 24 US jurisdictions and annotated by practising attorneys. Evaluating ten frontier models, we find that no model exceeds F2 = 0.46 on missing-element identification and that the median recall is 0.44. Models either hedge indiscriminately or answer silently under fabricated presumptions. No model both identifies and qualifies responses to deficient queries while directly addressing complete ones.

Tabular machine learning presents a paradox: modern models achieve state-of-the-art performance using high-dimensional (high-D), collinear, error-prone data, defying the "Garbage In, Garbage Out" mantra. To help resolve this, we synthesize principles from Information Theory, Latent Factor Models, and Psychometrics, clarifying that predictive robustness arises not solely from data cleanliness, but from the synergy between data architecture and model capacity. Partitioning predictor-space "noise" into "Predictor Error" and "Structural Uncertainty" (informational deficits from stochastic generative mappings), we prove that leveraging high-D sets of error-prone predictors asymptotically overcomes both types of noise, whereas cleaning a low-D set is fundamentally bounded by Structural Uncertainty. We demonstrate why "Informative Collinearity" (dependencies from shared latent causes) enhances reliability and convergence efficiency, and explain why increased dimensionality reduces the latent inference burden, enabling feasibility with finite samples. To address practical constraints, we propose "Proactive Data-Centric AI" to identify predictors that enable robustness efficiently. We also derive boundaries for Systematic Error Regimes and show why models that absorb "rogue" dependencies can mitigate assumption violations. Linking latent architecture to Benign Overfitting, we offer a first step towards a unified view of robustness to Outcome Error and predictor-space noise, while also delineating when traditional DCAI's focus on label cleaning remains powerful. By redefining data quality from item-level perfection to portfolio-level architecture, we provide a theoretical rationale for "Local Factories" -- learning from live, uncurated enterprise "data swamps" -- supporting a deployment paradigm shift from "Model Transfer" to "Methodology Transfer'' to overcome static generalizability limitations.

Hard prompt compression reduces long-context inference cost by independently scoring tokens, sentences, or chunks and retaining the highest-scoring units under a budget. We identify a structural failure in this procedure: independent selection can split dependent evidence pairs, retaining one member while deleting the other. When retained text contains an answer but deleted text defines the entity needed to interpret it, we call the result referential dangling. At a compression ratio of 0.30, Beaver, which ranks coherent chunks using Qwen3-0.6B embeddings, leaves the answer path incomplete in 34-54% of bridge examples across three multi-hop question answering datasets. On a shared HotpotQA bridge set, all six hard compressors we test exhibit dangling at rates up to 60%, and every document in LongBench-v2 Single-Document QA contains at least one dangling reference. On dangling examples evaluated with Qwen3-8B, reinserting the missing supporting paragraph while removing nonsupporting paragraphs to maintain the token budget improves accuracy by 29-34 percentage points (p < 0.0001), recovering at least 88% of the gap to contexts retaining both supporting paragraphs. Stronger answer models do not absorb the loss: on MuSiQue, GPT-5.5 is 8.8 points less accurate on compressed contexts than on contexts retaining both supporting paragraphs. Finally, we train a compact classifier to rank omitted sentences by whether they are needed to interpret retained text and reinsert the top-ranked candidates without support annotations at inference. On HotpotQA with Qwen3-8B, this automatic restoration improves accuracy by 4.7 points while changing the compression ratio only from 0.30 to 0.31. Hard compressors should optimize both relevance and referential completeness.

Ask a language model the same question about the same document twenty times, and it sometimes returns two different answers. We built Probity, a benchmark of 60 tasks and 470 items from real venture-financing filings, to measure how often this happens. Then we audited our own corpus and found a defect any excerpt-built benchmark can carry: items whose evidence is missing from the window of text the model is shown. The audit flags 36 items and separates two failures a single flag would conflate: evidence genuinely absent from the window and answers that must be computed from numbers the window does supply. Flagged items change their answers far more often, wobbling at 0.255 against 0.087 on the 427 clean items, and excluding them cuts apparent cross-model agreement by about a fifth. Before testing whether the missing evidence explains the instability, we registered a prediction: re-cut each window to hold its evidence, and instability should fall below a set threshold. It failed: the repair moved wobble by 0.058, with an interval containing zero. We report the association as correlational. Almost all measurements sit where instability cannot show, which bounds what a corpus built for accuracy can say about stability. We release the corpus, all 112,800 raw responses, and the audit as a runnable check for any document benchmark.

This paper proposes one of the first clinical applications of multimodal large language models (LLMs) as an assistant for radiologists to check errors in their reports. We created an evaluation dataset from two real-world radiology datasets (MIMIC-CXR and IU-Xray), with 1,000 subsampled reports each. A subset of original reports was modified to contain synthetic errors by introducing various type of mistakes. The evaluation contained two difficulty levels: SIMPLE for binary error-checking and COMPLEX for identifying error types. LLaVA (Large Language and Visual Assistant) variant models, including our instruction-tuned model, were used for the evaluation. Additionally, a domain expert evaluation was conducted on a small test set. At the SIMPLE level, the LLaVA v1.5 model outperformed other publicly available models. Instruction tuning significantly enhanced performance by 47.4% and 25.4% on MIMIC-CXR and IU-Xray data, respectively. The model also surpassed the domain experts accuracy in the MIMIC-CXR dataset by 1.67%. Notably, among the subsets (N=21) of the test set where a clinician did not achieve the correct conclusion, the LLaVA ensemble mode correctly identified 71.4% of these cases. This study marks a promising step toward utilizing multi-modal LLMs to enhance diagnostic accuracy in radiology. The ensemble model demonstrated comparable performance to clinicians, even capturing errors overlooked by humans. Nevertheless, future work is needed to improve the model ability to identify the types of inconsistency.

Language models have demonstrated remarkable performance in solving reasoning tasks; however, even the strongest models still occasionally make reasoning mistakes. Recently, there has been active research aimed at improving reasoning accuracy, particularly by using pretrained language models to "self-correct" their mistakes via multi-round prompting. In this paper, we follow this line of work but focus on understanding the usefulness of incorporating "error-correction" data directly into the pretraining stage. This data consists of erroneous solution steps immediately followed by their corrections. Using a synthetic math dataset, we show promising results: this type of pretrain data can help language models achieve higher reasoning accuracy directly (i.e., through simple auto-regression, without multi-round prompting) compared to pretraining on the same amount of error-free data. We also delve into many details, such as (1) how this approach differs from beam search, (2) how such data can be prepared, (3) whether masking is needed on the erroneous tokens, (4) the amount of error required, (5) whether such data can be deferred to the fine-tuning stage, and many others.

In the reduced basis method, the evaluation of the a posteriori estimator can become very sensitive to round-off errors. In this note, the origin of the loss of accuracy is revealed, and a solution to this problem is proposed and illustrated on a simple example.

Neural surrogates and operator networks for solving partial differential equation (PDE) problems have attracted significant research interest in recent years. However, most existing approaches are limited in their ability to generalize solutions across varying non-parametric geometric domains. In this work, we address this challenge in the context of Polyethylene Terephthalate (PET) bottle buckling analysis, a representative packaging design problem conventionally solved using computationally expensive finite element analysis (FEA). We introduce a hybrid DeepONet-Transolver framework that simultaneously predicts nodal displacement fields and the time evolution of reaction forces during top load compression. Our methodology is evaluated on two families of bottle geometries parameterized by two and four design variables. Training data is generated using nonlinear FEA simulations in Abaqus for 254 unique designs per family. The proposed framework achieves mean relative L^{2} errors of 2.5-13% for displacement fields and approximately 2.4% for time-dependent reaction forces for the four-parameter bottle family. Point-wise error analyses further show absolute displacement errors on the order of 10^{-4}-10^{-3}, with the largest discrepancies confined to localized geometric regions. Importantly, the model accurately captures key physical phenomena, such as buckling behavior, across diverse bottle geometries. These results highlight the potential of our framework as a scalable and computationally efficient surrogate, particularly for multi-task predictions in computational mechanics and applications requiring rapid design evaluation.

Errors in speech translations reduce trustworthiness of Speech Translation (ST) systems and can have serious consequences. Yet currently there is no established methodology for evaluating confidence and quality estimation of speech translations. To initiate progress in this direction, we propose Speech Translation Error Labelling (STEL). We create an annotation protocol, a small authentic end-to-end evaluation dataset, and we analyse how existing text-only and speech-processing systems perform the STEL task. Our results show that text-only XCOMET and multimodal LLM Qwen2.5-Omni are able to perform the STEL task in roughly half the precision of humans. We also find that direct speech processing is necessary for the STEL task, and that the current text-only and speech-processing systems are complementary in labelling translation-only vs. speech-processing errors in ST.

We argue that progress toward AGI is theory limited rather than data or scale limited. Building on the critical rationalism of Popper and Deutsch, we challenge the Platonic Representation Hypothesis. Observationally equivalent worlds can diverge under interventions, so observational adequacy alone cannot guarantee interventional competence. We begin by laying foundations, definitions of knowledge, learning, intelligence, counterfactual competence and AGI, and then analyze the limits of observational learning that motivate an error centric shift. We recast the problem as three questions about how explicit and implicit errors evolve under an agent's actions, which errors are unreachable within a fixed hypothesis space, and how conjecture and criticism expand that space. From these questions we propose Causal Mechanics, a mechanisms first program in which hypothesis space change is a first class operation and probabilistic structure is used when useful rather than presumed. We advance structural principles that make error discovery and correction tractable, including a differential Locality and Autonomy Principle for modular interventions, a gauge invariant form of Independent Causal Mechanisms for separability, and the Compositional Autonomy Principle for analogy preservation, together with actionable diagnostics. The aim is a scaffold for systems that can convert unreachable errors into reachable ones and correct them.

Large Language Models (LLMs) have exhibited strong mathematical reasoning and computational prowess, tackling tasks ranging from basic arithmetic to advanced competition-level problems. However, frequently occurring subtle errors, such as miscalculations or incorrect substitutions, limit the models' full mathematical potential. Existing studies to improve mathematical ability typically involve distilling reasoning skills from stronger LLMs or applying preference learning to step-wise response pairs. Although these methods leverage samples of varying granularity to mitigate reasoning errors, they overlook the frequently occurring subtle errors. A major reason is that sampled preference pairs involve differences unrelated to the errors, which may distract the model from focusing on subtle errors. In this work, we propose a novel preference learning framework called eRror-Injected Self-Editing (RISE), which injects predefined subtle errors into partial tokens of correct solutions to construct hard pairs for error mitigation. In detail, RISE uses the model itself to edit a small number of tokens in the solution, injecting designed subtle errors. Then, pairs composed of self-edited solutions and their corresponding correct ones, along with pairs of correct and incorrect solutions obtained through sampling, are used together for subtle error-aware DPO training. Compared with other preference learning methods, RISE further refines the training objective to focus on predefined errors and their tokens, without requiring fine-grained sampling or preference annotation. Extensive experiments validate the effectiveness of RISE, with preference learning on Qwen2-7B-Instruct yielding notable improvements of 3.0% on GSM8K and 7.9% on MATH.

Recent advances in Vision-Language Models (VLMs) have improved performance in multi-modal learning, raising the question of whether these models truly understand the content they process. Crucially, can VLMs detect when a reasoning process is wrong and identify its error type? To answer this, we present MMErroR, a multi-modal benchmark of 2,013 samples, each embedding a single coherent reasoning error. These samples span 24 subdomains across six top-level domains, ensuring broad coverage and taxonomic richness. Unlike existing benchmarks that focus on answer correctness, MMErroR targets a process-level, error-centric evaluation that requires models to detect incorrect reasoning and classify the error type within both visual and linguistic contexts. We evaluate 20 advanced VLMs, even the best model (Gemini-3.0-Pro) classifies the error in only 66.47\% of cases, underscoring the challenge of identifying erroneous reasoning. Furthermore, the ability to accurately identify errors offers valuable insights into the capabilities of multi-modal reasoning models. Project Page: https://mmerror-benchmark.github.io

Studies of bias in LLM-as-judge systems typically build synthetic corpora by prompting an LLM to generate a hallucinated answer to pair with a factual one, then presenting both to a judge. We report a case in which this generation step silently failed, and use it to argue that the failure mode is structural rather than incidental. In a multilingual (Turkish/English) faithfulness-judgment corpus, a decoding-budget parameter shared between judging and generation calls truncated one producer's hallucinated answers to a few words. The resulting items produced a large, statistically robust effect: a 32-point cross-lingual collapse in one judge's selection accuracy, replicated from N=50 to N=500, explained by a three-layer mechanistic account, and confirmed by a controlled producer-swap experiment, none of which was real. The effect vanished to ceiling once the shared parameter was corrected, and only manual reading of the raw generations, not any aggregate statistical check, exposed the fault. A second measured bias (Markdown-formatting preference) was not fabricated but distorted by the same fault, its magnitude and in one case its sign shifting with stimulus length, a mode aggregate metrics cannot distinguish from the first. We frame the underlying vulnerability using the test oracle problem: corpora whose negative examples are LLM-generated carry no mechanical way to verify item integrity, while corpora built by deterministic perturbation of a gold answer carry an item-level oracle for free. A positive control supports this claim directly: an analogous fault injected into a minimal perturbation-based corpus is caught with 100% accuracy by a zero-cost, zero-human gold-to-negative string comparison. We close with a validation protocol, derived from our own case, for analysts working in the oracle-less regime that we argue describes most contemporary multilingual LLM-as-judge corpora.

This article explores the adaptive relationship between Encoder Layers and Decoder Layers using the SOTA model Helsinki-NLP/opus-mt-de-en, which translates German to English. The specific method involves introducing a bias-free fully connected layer between the Encoder and Decoder, with different initializations of the layer's weights, and observing the outcomes of fine-tuning versus retraining. Four experiments were conducted in total. The results suggest that directly modifying the pre-trained model structure for fine-tuning yields suboptimal performance. However, upon observing the outcomes of the experiments with retraining, this structural adjustment shows significant potential.

While machine translation (MT) systems are achieving increasingly strong performance on benchmarks, they often produce translations with errors and anomalies. Understanding these errors can potentially help improve the translation quality and user experience. This paper introduces xTower, an open large language model (LLM) built on top of TowerBase designed to provide free-text explanations for translation errors in order to guide the generation of a corrected translation. The quality of the generated explanations by xTower are assessed via both intrinsic and extrinsic evaluation. We ask expert translators to evaluate the quality of the explanations across two dimensions: relatedness towards the error span being explained and helpfulness in error understanding and improving translation quality. Extrinsically, we test xTower across various experimental setups in generating translation corrections, demonstrating significant improvements in translation quality. Our findings highlight xTower's potential towards not only producing plausible and helpful explanations of automatic translations, but also leveraging them to suggest corrected translations.

Large language models often answer structurally unanswerable questions, such as computing cot(-540°) or evaluating (1).startswith("1"), instead of abstaining. We ask whether this failure reflects missing recognition or failed routing from recognition to abstention. Across instruction-tuned models from 1.7B to 70B parameters, a single linear direction in the hidden state separates answerable from structurally impossible math and code prompts, showing that models represent impossibility before generation. Yet this recognition direction is nearly orthogonal to the canonical safety-refusal direction that mediates trained harmful-content refusal. An in-domain behavior-defined invalidity-aware direction is closer to recognition, but only partially aligned with it, and remains near-orthogonal to safety refusal. Generation-time steering along the recognition direction changes invalidity-aware behavior bidirectionally and dose-responsively on structural math and code cells, while random directions do not. Base/instruct comparisons further show that the low-cosine geometry is already present at the pretraining endpoint. The confident-on-impossible failure is therefore better explained as a routing failure than as an encoding failure: the model has a usable "no admissible answer" signal, but the safety-refusal pathway is not aligned to use it.

The ability of large language models (LLMs) to utilize external tools has enabled them to tackle an increasingly diverse range of tasks. However, as the tasks become more complex and long-horizon, the intricate tool utilization process may trigger various unexpected errors. Therefore, how to effectively handle such errors, including identifying, diagnosing, and recovering from them, has emerged as a key research direction for advancing tool learning. In this work, we first extensively analyze the types of errors encountered during the function-calling process on several competitive tool evaluation benchmarks. Based on it, we introduce CRITICTOOL, a comprehensive critique evaluation benchmark specialized for tool learning. Building upon a novel evolutionary strategy for dataset construction, CRITICTOOL holds diverse tool-use errors with varying complexities, which better reflects real-world scenarios. We conduct extensive experiments on CRITICTOOL, and validate the generalization and effectiveness of our constructed benchmark strategy. We also provide an in-depth analysis of the tool reflection ability on various LLMs, offering a new perspective on the field of tool learning in LLMs. The code is available at https://github.com/Shellorley0513/CriticTool{https://github.com/Shellorley0513/CriticTool}.

Large Language Models (LLMs) are increasingly used for zero-shot annotation and LLM-as-a-judge tasks, yet their reliability hinges on how model-internalized priors interact with user-provided instructions. We investigate three dimensions of this interaction: (1) how an LLM's familiarity with data and task definitions affects performance, (2) the extent to which additional information in prompts can correct zero-shot errors ("decision stickiness"), and (3) model susceptibility to misaligned task definitions. Through experiments on toxicity detection across diverse datasets (spanning social media, gaming, news, and forums) using both dense and mixture-of-experts models, we find that nearly two-thirds of zero-shot errors are resistant to correction, with an overall rescue rate (fraction of initial errors corrected by prompting) of only 34.8%. High-confidence errors prove especially resistant to correction. When given misaligned definitions, LLMs follow them while maintaining confidence levels unchanged from the aligned condition. Crucially, we introduce Definition-Specific Familiarity (DSF), which measures alignment between a model's internal concept and the task definition. After controlling for dataset-level confounds, DSF shows a positive association with model performance (partial r = +0.41), while three distinct memorization metrics (ROUGE-L, BERTScore, and embedding cosine similarity) all fail to show a positive association. These findings show the limitations of prompt-based correction in annotation tasks, highlighting the importance of definition alignment over text-level memorization.

Large Language Models (LLMs) and Vision-Language Models (VLMs) are increasingly evaluated on table reasoning tasks, but the role of table representation remains under-explored. In practice, the same table content may appear in different structural formats, such as HTML, Markdown, and LaTeX, or as rendered images. However, existing evaluations often let content, format, layout, and modality vary together, making it difficult to isolate representation effects. We introduce TABVERSE, a controlled multimodal table benchmark that aligns the same table content across multiple structural formats and rendered images, with question category and difficulty tags. This design enables systematic evaluation of representation effects while holding table content fixed. We evaluate LLMs and VLMs across three tasks: Question Answering (QA), Structural Understanding Capability (SUC), and Structure Reconstruction (SR). Our results show that representation choice substantially affects table understanding. Models generally perform better with structured text than with rendered images, but the size of this gap depends on the task, model, and format. HTML is often the most robust text format, while row-sensitive structural tasks and syntactically usable LaTeX reconstruction remain challenging. These findings show that table representation is a key factor in reliable table evaluation.

Large language models frequently fail to produce correct code on their first attempt, yet most benchmarks evaluate them in a single-shot setting. We investigate iterative self-repair (feeding execution errors back to the model for correction) across seven models spanning three families and both open-weight and proprietary providers: Llama 3.1 8B, Llama 3.3 70B, Llama 4 Scout (MoE, 16 experts), Llama 4 Maverick (MoE, 128 experts), Qwen3 32B, Gemini 2.5 Flash, and Gemini 2.5 Pro. On HumanEval (164 problems) and MBPP Sanitized (257 problems) with up to five attempts, self-repair universally improves pass rates: +4.9 to +17.1 pp on HumanEval and +16.0 to +30.0 pp on MBPP. Gemini 2.5 Flash achieves the highest final pass rates (96.3% HumanEval, 93.8% MBPP). Most gains concentrate in the first two rounds.Error-type analysis shows assertion errors (logical mistakes) are the hardest to repair at ~45%, while syntax and name errors are repaired at substantially higher rates, connecting to broader findings on the limits of LLM self-correction. Prior work found that weaker models fail at self-repair or require fine-tuning; we show that modern instruction-tuned models succeed with prompting alone, even at 8B scale. We also provide the first comparison of dense and MoE architectures for self-repair, and extend the repair-vs-resampling tradeoff analysis to modern models. A prompt ablation reveals chain-of-thought repair yields up to +5.5 pp additional self-repair gain (measured as improvement in repair delta) over minimal prompting for capable models.

Structural modeling is a fundamental component of computational engineering science, in which even minor physical inconsistencies or specification violations may invalidate downstream simulations. The potential of large language models (LLMs) for automatic generation of modeling code has been demonstrated. However, non-executable or physically inconsistent outputs remain prevalent under stringent engineering constraints. A framework for physics-consistent automatic building modeling is therefore proposed, integrating domain knowledge construction, constraint-oriented model alignment, and verification-driven evaluation. CivilInstruct is introduced as a domain-specific dataset that formalizes structural engineering knowledge and constraint reasoning to enable simulation-ready model generation. A two-stage fine-tuning strategy is further employed to enforce constraint satisfaction and application programming interface compliance, substantially reducing hallucinated and non-conforming outputs. MBEval is presented as a verification-driven benchmark that evaluates executability and structural dynamics consistency through closed-loop validation. Experimental results show consistent improvements over baselines across rigorous verification metrics. Our code is available at https://github.com/Jovanqing/AutoBM.

Science progresses by iteratively advancing and correcting humanity's understanding of the world. In machine learning (ML) research, rapid advancements have led to an explosion of publications, but have also led to misleading, incorrect, flawed or perhaps even fraudulent studies being accepted and sometimes highlighted at ML conferences due to the fallibility of peer review. While such mistakes are understandable, ML conferences do not offer robust processes to help the field systematically correct when such errors are made. This position paper argues that ML conferences should establish a dedicated "Refutations and Critiques" (R&C) Track. This R&C Track would provide a high-profile, reputable platform to support vital research that critically challenges prior research, thereby fostering a dynamic self-correcting research ecosystem. We discuss key considerations including track design, review principles, potential pitfalls, and provide an illustrative example submission concerning a recent ICLR 2025 Oral. We conclude that ML conferences should create official, reputable mechanisms to help ML research self-correct.

Large Multimodal Models (LMMs) have witnessed remarkable growth, showcasing formidable capabilities in handling intricate multimodal tasks with exceptional performance. Recent research has underscored the inclination of large language models to passively accept defective inputs, often resulting in futile reasoning on invalid prompts. However, the same critical question of whether LMMs can actively detect and scrutinize erroneous inputs still remains unexplored. To address this gap, we introduce the Input Scrutiny Ability Evaluation Framework (ISEval), which encompasses seven categories of flawed premises and three evaluation metrics. Our extensive evaluation of ten advanced LMMs has identified key findings. Most models struggle to actively detect flawed textual premises without guidance, which reflects a strong reliance on explicit prompts for premise error identification. Error type affects performance: models excel at identifying logical fallacies but struggle with surface-level linguistic errors and certain conditional flaws. Modality trust varies-Gemini 2.5 pro and Claude Sonnet 4 balance visual and textual info, while aya-vision-8b over-rely on text in conflicts. These insights underscore the urgent need to enhance LMMs' proactive verification of input validity and shed novel insights into mitigating the problem. The code is available at https://github.com/MLGroupJLU/LMM_ISEval.

When deploying large language models (LLMs), it is important to ensure that these models are not only capable, but also reliable. Many benchmarks have been created to track LLMs' growing capabilities, however there has been no similar focus on measuring their reliability. To understand the potential ramifications of this gap, we investigate how well current benchmarks quantify model reliability. We find that pervasive label errors can compromise these evaluations, obscuring lingering model failures and hiding unreliable behavior. Motivated by this gap in the evaluation of reliability, we then propose the concept of so-called platinum benchmarks, i.e., benchmarks carefully curated to minimize label errors and ambiguity. As a first attempt at constructing such benchmarks, we revise examples from fifteen existing popular benchmarks. We evaluate a wide range of models on these platinum benchmarks and find that, indeed, frontier LLMs still exhibit failures on simple tasks such as elementary-level math word problems. Analyzing these failures further reveals previously unidentified patterns of problems on which frontier models consistently struggle. We provide code at https://github.com/MadryLab/platinum-benchmarks

Industrial Computer-Aided Design (CAD) code generation requires models to produce executable parametric programs from visual or textual inputs. Beyond recognizing the outer shape of a part, this task involves understanding its 3D structure, inferring engineering parameters, and choosing CAD operations that reflect how the part would be designed and manufactured. Despite the promise of Multimodal large language models (MLLMs) for this task, they are rarely evaluated on whether these capabilities jointly hold in realistic industrial CAD settings. We present BenchCAD, a unified benchmark for industrial CAD reasoning. BenchCAD contains 17,900 execution-verified CadQuery programs across 106 industrial part families, including bevel gears, compression springs, twist drills, and other reusable engineering designs. It evaluates models through visual question answering, code question answering, image-to-code generation, and instruction-guided code editing, enabling fine-grained analysis across perception, parametric abstraction, and executable program synthesis. Across 10+ frontier models, BenchCAD shows that current systems often recover coarse outer geometry but fail to produce faithful parametric CAD programs. Common failures include missing fine 3D structure, misinterpreting industrial design parameters, and replacing essential operations such as sweeps, lofts, and twist-extrudes with simpler sketch-and-extrude patterns. Fine-tuning and reinforcement learning improve in-distribution performance, but generalization to unseen part families remains limited. These results position BenchCAD as a benchmark for measuring and improving the industrial readiness of multimodal CAD automation.

Large language models can diagnose a student program from its code, problem statement, and reference solution. Evaluating this ability requires a clear definition of what counts as the correct diagnosis. We introduce PyMETA, a Python error dataset with 48,646 student submissions to 155 problems. Every submission has a single label for the first execution error identified by an Online Judge, or No Error when the program passes all tests. A targeted subset of 97 submissions also has expert labels collected through iterative repair and re-execution. The taxonomy has three levels; its most detailed level contains 14 labels, including No Error, Logic Error, named Python exceptions, and an Other Errors category. We evaluate two finetuned models and two groups of prompted LLMs: four earlier models and four recent models. When evaluated against the first execution error, the recent prompted models reach 87.5--93.8% macro F1, above the strongest finetuned baseline at 80.6%. This is the opposite of the comparison obtained with the earlier prompted models. On the 97-item expert subset, however, exact-set match is only 43.3--48.5%, although sample F1 is about 79--81%. Output format also matters. On the same 45 audited submissions whose expert label sets do not contain Logic Error, none of the four recent models returns that label under single-error prompting, but 46.7--57.8% of their multi-error outputs include it, usually after an explicit-error label. The results show that model rankings and claims about label bias depend on the meaning of the gold label, the number of labels a model may return, and the scoring rule.

Deep-research agents solve tasks through long trajectories of search, tool use, evidence inspection, and answer synthesis. Evaluation based on final answers shows whether an agent succeeds, but not which parts of the trajectory make the answer unreliable. We study span-level error localization for deep-research agents. We collect 2,790 real trajectories from two agent frameworks, three backbone models, and three benchmarks, convert raw logs into semantic spans, and annotate harmful error spans through LLM-assisted expert review. From these annotations, we build TELBench, a 1,000-instance benchmark for identifying error spans among normal exploration, failed searches, tentative hypotheses, and harmless noise. We further propose DRIFT, a claim-centric auditing framework that tracks agent claims, checks their support in trajectory evidence, and marks spans where unsupported or conflicting claims affect the answer path. Experiments across model families and auditing frameworks show that DRIFT improves span-level error localization and first-error accuracy by up to 30 percentage points. Our work provides a process-level view of reliability in deep-research agents.

Small open-source large language models (LLMs) in the 0.6B-4B parameter range are increasingly deployed for structured output generation (JSON, function calling, data extraction), yet little is known about how constrained decoding (CD) interacts with model scale in this regime. We benchmark five models from three families across 14 structured-output tasks under three decoding conditions (native, Outlines, XGrammar). We introduce a two-axis evaluation that separates structural correctness (schema validity) from semantic correctness (content accuracy). We find that CD eliminates all structural failures across all models (schema validity: 78.6-92.9% to 100%), but content accuracy reveals a persistent semantic gap that is scale-dependent: type coercion failures are fully CD-rescuable, while instruction-semantic failures (e.g., multi-step function calling) remain CD-resistant. Schema conformance is necessary but not sufficient for semantic correctness; CD's reach ends exactly where schema conformance ends.

Automatic speech recognition replaces typing only when correction costs less than manual entry, a threshold determined by error types, not counts: fixing a misrecognized domain term costs far more than inserting a comma. Word error rate (WER) fails on two fronts: it collapses distinct error categories into a single scalar, and it structurally penalizes agglutinative languages where valid sandhi merges inflate scores. We introduce SCRIBE, a diagnostic framework that provides categorical error decomposition into lexical, punctuation, numeral, and domain-entity rates through sandhi-tolerant alignment with domain vocabulary injection. Human validation confirms SCRIBE aligns with expert judgment where WER does not. We release SCRIBE, an LLM curation pipeline, benchmarks, and open-weight rich transcription models for Hindi, Malayalam, and Kannada.

Although large language models (LLMs) have become transformative, they still make mistakes and can explore unproductive reasoning paths. Self-correction is an important capability for a trustworthy LLM, particularly an autoregressive LLM. While LLMs can identify error in user input, they exhibit a systematic 'Self-Correction Blind Spot' - failing to correct identical error in their own outputs. To systematically study this phenomenon, we introduce Self-Correction Bench, a systematic framework to measure this phenomenon through controlled error injection at three complexity levels. Testing 14 models, we find an average 64.5% blind spot rate. We find multiple evidences that this limitation relates to training data composition: human training demonstrations predominantly show error-free responses rather than error-correction sequences, unlike RL-trained models that learn error correction through outcome feedback. Remarkably, simply appending "Wait" reduces blind spots by 89.3%, suggesting that the capability exists but requires activation. Our work highlights a critical limitation in current LLMs and offers potential avenues for improving their reliability and trustworthiness.

Large Language Models (LLMs) have demonstrated remarkable capabilities across various domains. Math Word Problems (MWPs) serve as a crucial benchmark for evaluating LLMs' reasoning abilities. While most research primarily focuses on improving accuracy, it often neglects understanding and addressing the underlying patterns of errors. Current error classification methods rely on static and predefined categories, which limit their ability to capture the full spectrum of error patterns in mathematical reasoning. To enable systematic error analysis, we collect error samples from 15 different LLMs of varying sizes across four distinct MWP datasets using multiple sampling strategies. Based on this extensive collection, we introduce MWPES-300K, a comprehensive dataset containing 304,865 error samples that cover diverse error patterns and reasoning paths. To reduce human bias and enable fine-grained analysis of error patterns, we propose a novel framework for automated dynamic error classification in mathematical reasoning. Experimental results demonstrate that dataset characteristics significantly shape error patterns, which evolve from basic to complex manifestations as model capabilities increase. With deeper insights into error patterns, we propose error-aware prompting that incorporates common error patterns as explicit guidance, leading to significant improvements in mathematical reasoning performance.

A common assumption holds that enough observational and interventional data, given to a strong enough predictor, suffices. We report a failure mode that contradicts it. Across hundreds of structural causal models, on identified quantities a strong predictor and a Bayesian baseline both succeed, but on unidentified quantities (the couplings between counterfactual worlds) the predictor collapses to a point, on 28% of models to one no valid model can produce, while the truth is an admissible interval more data never narrows. The gap is structural: prediction cannot represent uncertainty over counterfactual couplings. We cast a world model as a single positive semidefinite coupling kernel K(T,T') over admissible worlds, whose diagonal is the ordinary posterior (what a predictor recovers) and whose off-diagonal is the cross-world coupling it cannot, which every counterfactual reads. The paper is the theory of that off-diagonal. It is real: two states with identical posteriors differ on a cross-world query, and the off-diagonal is the coupling that fixes counterfactuals. It can be bounded: positive semidefiniteness is partial-identifying information the marginals lack, and enforcing it bounds counterfactuals in polynomial time where the exact response-type program is intractable. Logical structure sharpens it: ontology axioms tighten the bound by up to a third, propagating to couplings they never touch. It can be acquired: targeted scars, constraints learned from encountered infeasibilities, close the gap several times faster than untargeted ones. Its full reconstruction is approximate counting of the admissible worlds, tractable below the Sly-Sun threshold and inapproximable above; we do not claim to beat the worst case.

Domain expertise enhances judgment within boundaries but creates systematic vulnerabilities specifically at borders. We term this Transitive Expert Error (TEE), distinct from Dunning-Kruger effects, requiring calibrated expertise as precondition. Mechanisms enabling reliable within-domain judgment become liabilities when structural similarity masks causal divergence. Two core mechanisms operate: structural similarity bias causes experts to overweight surface features (shared vocabulary, patterns, formal structure) while missing causal architecture differences; authority persistence maintains confidence across competence boundaries through social reinforcement and metacognitive failures (experts experience no subjective uncertainty as pattern recognition operates smoothly on familiar-seeming inputs.) These mechanism intensify under three conditions: shared vocabulary masking divergent processes, social pressure for immediate judgment, and delayed feedback. These findings extend to AI routing architectures (MoE systems, multi-model orchestration, tool-using agents, RAG systems) exhibiting routing-induced failures (wrong specialist selected) and coverage-induced failures (no appropriate specialist exists). Both produce a hallucination phenotype: confident, coherent, structurally plausible but causally incorrect outputs at domain boundaries. In human systems where mechanisms are cognitive black boxes; AI architectures make them explicit and addressable. We propose interventions: multi-expert activation with disagreement detection (router level), boundary-aware calibration (specialist level), and coverage gap detection (training level). TEE has detectable signatures (routing patterns, confidence-accuracy dissociations, domain-inappropriate content) enabling monitoring and mitigation. What remains intractable in human cognition becomes addressable through architectural design.

We introduce a few-shot learning framework for error detection. We show that data augmentation (a form of weak supervision) is key to training high-quality, ML-based error detection models that require minimal human involvement. Our framework consists of two parts: (1) an expressive model to learn rich representations that capture the inherent syntactic and semantic heterogeneity of errors; and (2) a data augmentation model that, given a small seed of clean records, uses dataset-specific transformations to automatically generate additional training data. Our key insight is to learn data augmentation policies from the noisy input dataset in a weakly supervised manner. We show that our framework detects errors with an average precision of ~94% and an average recall of ~93% across a diverse array of datasets that exhibit different types and amounts of errors. We compare our approach to a comprehensive collection of error detection methods, ranging from traditional rule-based methods to ensemble-based and active learning approaches. We show that data augmentation yields an average improvement of 20 F1 points while it requires access to 3x fewer labeled examples compared to other ML approaches.

Maybe not. We identify and analyse errors in the popular Massive Multitask Language Understanding (MMLU) benchmark. Even though MMLU is widely adopted, our analysis demonstrates numerous ground truth errors that obscure the true capabilities of LLMs. For example, we find that 57% of the analysed questions in the Virology subset contain errors. To address this issue, we introduce a comprehensive framework for identifying dataset errors using a novel error taxonomy. Then, we create MMLU-Redux, which is a subset of 3,000 manually re-annotated questions across 30 MMLU subjects. Using MMLU-Redux, we demonstrate significant discrepancies with the model performance metrics that were originally reported. Our results strongly advocate for revising MMLU's error-ridden questions to enhance its future utility and reliability as a benchmark. Therefore, we open up MMLU-Redux for additional annotation https://huggingface.co/datasets/edinburgh-dawg/mmlu-redux.

While self-correction has shown promise in improving LLM outputs in terms of style and quality (e.g. Chen et al., 2023; Madaan et al., 2023), recent attempts to self-correct logical or reasoning errors often cause correct answers to become incorrect, resulting in worse performances overall (Huang et al., 2023). In this paper, we break down the self-correction process into two core components: mistake finding and output correction. For mistake finding, we release BIG-Bench Mistake, a dataset of logical mistakes in Chain-of-Thought reasoning traces. We provide benchmark numbers for several state-of-the-art LLMs, and demonstrate that LLMs generally struggle with finding logical mistakes. For output correction, we propose a backtracking method which provides large improvements when given information on mistake location. We construe backtracking as a lightweight alternative to reinforcement learning methods, and show that it remains effective with a reward model at 60-70% accuracy.